Display the Welcome screen when Photoshop CC starts up?

I have researched and found lots of incidences where people want to keep the Welcome screen from displaying but I am want it to display and it will not.
The checkbox under Edit>Preferences>General that says "Do Not Show Welcome Screen on Launch" is unchecked. I have tried checking that box saving, then unchecking saving again and restarting Photoshop. I have tried uninstalling Photoshop twice, once saving my preferences, the second time discarding my preferences and re-installing. Still no Welcome screen at launch. I have read that there is an option under Help>Welcome... to reopen the Welcome screen. I do not see that option and believe that is on the Mac only.
By the way the Welcome screen opens/works perfectly in Illustrator CC 2014.
I am running a Windows 7 PC with the latest version of Photoshop CC 2014.
Anyone have any ideas?
Thanks!

I believe you have an installation problem. Others have had problems with the Welcome Screen and I had a problem after the 15.2.2 update. Others were not able to Play the video tutorials from the welcome window. Photoshop seems to use CEPHtmlEngine.exe to display the Welcome screen. The CC 2014.2.2 update installed on my machine without a problem. CC 2014 worked and I had turned off the welcome screen. However I did not have the new Photoshop CC 2014 preference Do not show Welcome Screen on launch and when I tried to use menu Help>Welcome I received a popup error stating Photoshop could not start the plug-in because it was not signed. The way I was able to fix this problem was to download the direct CC 2014 installer and install CC 2014 on top of the CC 2014 currently insall. CC 2014 installed and was installed activated and after I used menu Help>Update to get CC 2014 up to CC 2014.2.2 all worked my Add-ons and preferences were still there. However if I start CC 2014 and immediately try to open the Welcome screen I will get the pop-up your getting Welcome Dialog not installed. But when I click OK and try menu Help>Welcome a second time it works. The new Preference Do not show Welcome Scree on launch is there and I can set it there or from the welcome screen option.

Similar Messages

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

The welcome screen always appears upon starting iTunes. (Win7 with newest iTunes update)

The only option to get past is to click either "Agree" or "No thanks" and then I can view my music. However, upon closing and re-opening, the same screen will show up. Very annoying.

See this post.
tt2

Temporarily displaying a "login screen" when a VI starts

I've finished creating an app that I want to add a screen for operator login. Once the operator enters the login text I want the login screen to disappear and the main app screen to appear.
I'm not sure how to accomplish this. Your input will be appreciated.
thanks,
todd

Try using my attached example to create a popup login screen. Depending on the status or valid login, you could continue with your application or exit.
Attachments:
Login.llb ‏54 KB

How to turn off the welcome screen when I start Illustrator

Can it be done. I know in earlier version it was under preferences, general. Don't see it in CC.
Thanks!!

cghelton,
I believe this is your rescue:
Re: How can I turn off the Illustrator CC 2014 hello screen permanently?

Photoshop Elements 11 Organiser does not start from the welcome screen

Having installed Photoshop Elements 11(Windows 7) I cannot open the Organiser from the welcome screen. It can be opened via the Editor but few of the thumbnails are shown as pictures rather as empty squares. The situation does not improve with time but tends to get worse with pictures turning into squares. I have tried the tip with preferences but to no avail. I would be very grateful for some help. Best Regards Ian Tomlinson

Try pressing Ctrl+A (to select all thumbnails) and then refresh again (Edit >> Update Thumbnails for selected items). If that makes no difference you may need to regenerate the cache.
It may be worth rebuilding the thumbnail cache before re-installing. Click the menu:
Help >> System info to find the path to your catalog.
1. Close Organizer.
2. Navigate to C: ProgramData/Adobe/Elements Organizer/Catalogs/My Catalog
3. Find the file - thumb.5.cache
4. Highlight the file and delete it.
5. Re-start Elements Organizer
6. Wait until all thumbnails have been generated.
N.B. ProgramData may be a hidden system file:
http://windows.microsoft.com/en-US/windows-vista/Show-hidden-files

Why is the welcome screen blank when InDesign starts?

When I start InDesign the welcome screen is blank. Does anybody know how to solve this problem?

P Spier,
I tried removing preference but the welcome screen still comes up blank. I even uninstalled and reinstalled.
Nothing is working and this is very annoying.
Dorothy Charles
Desktop Publisher
The Segal Group
333 West 34th Street | New York, NY 10001-2402
T 212.251.50320 | M 718.490.6797
[email protected]
Monday – Thursday – In Office
Friday - Out
Members of The Segal Group include:
Segal Consulting, Sibson Consulting,
Segal Rogerscasey and Segal Select Insurance.

I have Photoshop Elements 12. When I open the organizer, click on a picture, then want to use the Editor, I get an error message. If I click on the Editor from the Welcome screen, error message. What happened to my Editor?

I have Photoshop Elements 12. When I open the organizer, click on a picture, then want to use the Editor, I get an error message. If I click on the Editor from the Welcome screen, error message. What happened to my Editor?

I would suggest un-installing via the Windows control panel and then download again and re-install. Try an alternative link and validate with your 24 digit serial number - click here for PSE downloads

How to avoid the Welcome Screen in WIN7 Starter

How do I avoid the Welcome Screen in WIN7 Starter? When I bootup, I want the computer to boot to desktop, because I have programs that need to run as soon as I boot up. I managed to get rid of password requests, but I still see the Toshiba Logo that I have to click before a full bootup occurs.
Thanks
Chaz

For ias9041 entreprise, just change your httpd.conf DocumentRoot to somewhere else
and
do a
dcmctl/updateconfig -ct ohs
opmnctl restartproc type=ohs
Ken
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/fs/u02/sw_ux/oracle/product/ias904/Apache/Apache/htdocs"

Everytime I start Itunes, I get the Welcome Screen and everything is reset

Hi,
everytime I start ITunes 64 bit on my Windows 7 64 bit PC, I get the Welcome Screen and all is reset.
Seems to be ITunes can not store the settings after closing.

I am having the same problem! Everything worked fine last week and now it looks as though iTunes is brand new. I can't sync my iphone without restoring. and I if I reload my library or even a song, nothing saves when closed. It just sits there empty.

Adobe Photoshop Elements will not come up from the welcome screen

When I am in the welcome screen and press the organizer or edit button the program will not load and come up.

Can you try lanching them direcrlty :
Mac - Navigate to 'Go->Applications/Adobe Photoshop Elements 11->Support Files->Adobe Photoshop Elements Editor'. Double click 'Photoshop Elements Editor'.
Win -
Win x64: C:\Program Files (x86)\Adobe\Photoshop Elements 11 Win x32: C:\Program Files\Adobe\Photoshop Elements 11
Right click on 'PhotoshopElementsEditor.exe' and select 'Run as Admin'.
If still an issue try this for Editor:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
make sure the exe is not stucked in task manager by going in task manager and check for PhotoshopELementsEditor.exe file. Stop the process and try.
Thanks,
Garry

Photoshop Elements 9 only opens to the Welcome screen.

Elements 9 only opens to the Welcome screen. Organiser and Edit will not open. I cannot deactivate the programe so I can re-install. I have tried pressing Ctrl+Alt+Shift but nothing happens.

Hi Barry,
The Welcome screen sometimes leaves a process running which can cause a problem which is why I suggested bypassing it.
If you reboot the system and avoid the welcome screen by using the direct link does that work?
When you tried resetting the preferences (Ctrl + Alt + Shift when starting up the editor from the direct link), did you see the message asking you to confirm the deletion? You need to hold the keys down all the time it is loading.
Turning to the organizer, try loading it from the direct link above but hold the shift key down whilst it loads. It should enter the Catalog Manager. Select your current catalog and click on the Repair button to see if it finds any errors.
Good luck
Brian

I have Elements 12 installed. When I am in the catalog, click on a photo, then want to open the Editor, I get an error message. If I click on Editor from the Welcome screen, I get the same error message. Why doesn't Editor work? Thanks.

I have Elements 12 installed. When I am in the catalog, click on a photo, then want to open the Editor, I get an error message. If I click on Editor from the Welcome screen, I get the same error message. Why doesn't Editor work? Thanks.

You'd better ask in the Elements forum.
Photoshop Elements

When I pressed the power button it hangs on the welcome screen and what wrong with the system

When power on the MacPro it hangs on the welcome screen. What should I do to overcome this issue

I would recomend reseting the PRAM. A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings. Hope this helps!

I recently did a restore to factory settings on my 2009 macbook and now im stuck on the welcome screen where u choose the country my trackpad allows me to move the arrow around but when i tap continue to choose it does nothing. someone please help

I recently restored my 2009 macbook to factory settings and now its stuck on the welcome screen where u choose your country. My trackpad allows me to move the arrow around but when I tap on it to select continue it does nothing at all. The only thing else it will allow me to do is go thru the voice over tutorial by pressing escape. Please help me fix this I need to use my computer.

Hi, teezbreezy64.
I found a couple of resources to help troubleshoot the issue you are experiencing. The first is this article named Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues found here http://support.apple.com/kb/TS1248.
Try disconnecting the MagSafe connector from the computer and check the trackpad function. If the trackpad becomes responsive again, improper grounding may be the issue.
If a two-prong AC plug is being used with the power adapter, try using the three-prong power cable that shipped with your computer and plug it into a grounded outlet.
If the issue persists, make sure the third prong is present and do not use an adapter to enable the three-prong adapter to be used in a two-prong outlet. Note that the ground in the three-prong outlet may not be connected. This is common in older homes or buildings with replaced outlets. In these situations, the three-prong power cable will not improve trackpad responsiveness.
If a grounded outlet is not available, rest your palm on the palm rest when using the trackpad. This should enable the trackpad to function properly.
If that does not resolve the issue then I recommend resetting the SMC on your computer. Here is an article on how to do that:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Regards,
Jason H.

Display the Welcome screen when Photoshop CC starts up?

Similar Messages

Maybe you are looking for