Display value in Bar chart conditionally

I've a chart with Bar-Vertical Stacked type. In one bar 7/8 stacks are coming, some of value 1000 and some of very small values like 2, 5,6 etc. For each of these small bars when I'm displaying value in center position with markerTextPlace="MTP_CENTER", it becomes clumsy.
In this case, I want to only show the slice in vertical bar but not to display value if value<10.
How this condition can be checked to view value.
Please suggest. Kind Regards.

Can anyone please suggest.
Regards.

Similar Messages

  • Data values on Bar Chart in a BI Publisher report (11g)

    I have a bar chart that I created via the layout editor in BI Publisher 11g, and I'm displaying the data values on the chart. That part works great. However, we're noticing that the chart adds zeros to the end of the data values depending on the length of the number being passed to the chart. My data item is a number that is 5 bytes in total, with 2 decimals. If the data value is *10.10*, the data displayed on the bar chart shows *10.10*. But when my data value is *1.10*, the data displayed on the bar chart is *1.100*. And if my data value is *.10*, the bar chart displays *0.1000*. The bar chart adds zeros to the end as the number of characters to the left of the decimal decreases.
    I don't see a way to make it not do that. Has anyone else run into this, and been able to change it?

    Basically what are you trying to do :
    Attaching Mutiple Data Definition to a XML Program and deciding which one to call ased on parameter.Sorry you can not do that one Data DEfinition per Report.
    ut there is one way of doing that.
    Create multiple data defintion( mutiple programs) and then a master program something like
    IF Master Program Param1 = 'X'
    call BI Program 1
    ELSIF Master Program Param1 = 'Y'
    call I Program 2....
    End IF;

  • WAD Display value in bar of a bar chart

    Hello group,
    I'm trying to display the values of every bar in a bar chart and can't fine the way to.  I'm sure it's quite easy and can't find the solution.  I've searched the forum and only found a link on SAP help which explains how to do it on individual bar but not all of them (Series --> Series1 --> Show Labels, same for Series2 until Series5 etc etc...).
    I can't find any options for all Series.  Any help would be appreciated.  Thanks.
    Cheers,
    John.

    Figured it out.  It seems that this option is only available in Wizard mode, not when using the refine...  Oh well...

  • WAD - Values above Bar Chart not displaying.

    Hi All,
    Please find the report that created in WAD using Chart.
    From the above image, the numbers above the Bars is not displaying except the first Bar. I have checked the Series in WAD and all the settings are same Bar 1 and Bar 2. But still, the values are not displaying except 1st Bar. Please find the settings i made in Web Application designer.
    And also some text is displaying "Missing text XXXX". Any settings i need to do for not appearing in the chart, pls suggest.
    Do i need to do any other settings for displaying the value above the Bar Chart.
    Thanks.

    Hello Jalina,
    I would echo recommendation from Sapna. Upgrade your IGS if possible.
    Goto the IGS Download area in the SAP Service Marketplace.
    Download the IGS executable and library patch (igsexe*.sar) for
    your platform from
    -: http://service.sap.com/swdc
    ->  Support Packages and Patches -> A-Z Index ->Select "I"
    -> SAP IGS -> SAP IGS <version>
    -> SAP IGS <version>   -> <operating system>.
    Also review notes
    896400  BC-FES-IGS  Upgrade your WebAS 7.x based IGS
    1491848 BC-FES-IGS  What IGS should I be using with my Web AS?
    844669  BC-FES-IGS  Profile parameter of IGS as of Version 7.00
    514841  BC-FES-IGS  Troubleshooting when a problem occurs with the IGS
    If this is not possible can you update the thread with your IGS version and system details?
    To find the IGS Version. Call transaction: SIGS - if the IGS server is running
    This page shows the versions of the IGS components. The number before
    the last number shows the patch level
    You will something like this: Version     7200.0.3.1
                                                                               ^
                                                    this is your patch level
    7200.0.3.1
    ^^
    this is your IGS Version level
    this means your IGS is 7.20 Patch 3
    You can also check your patch level as follows:
    - Start transaction SA38 (or SE38)
    - Run the report GRAPHICS_IGS_ADMIN
    - Choose the rfc destination, IGS_RFC_DEST should be the default
    - Select Status
    Best regards,
    Oisin

  • Displaying bar chart conditionally in OBIEE answers

    Hello All,
    I've a simple bar chart having one measure in x-axis and two measures in y-axis.
    I want to add a conditional formatting for the two measures scaled in y-axis.
    If first measure is greater than second measure, then i want the first measure to be displayed in red color.
    Please help.
    Thanks in advance!
    Dinesh

    Hi Dinesh,
    Create a dummy column -> fx write a case statement case when first measure > second measure then 1 elso 0 end
    and chart -> Format chart data -> conditional tab -> Add Condition -> select your column on condition (dummy column equal to 1 then red color....)
    hope hepls u....
    Don't forget to assign points and close the thread if your question is answered.........
    Cheers,
    Aravind

  • Display values on a chart

    hi,
    in excel, you can display the value of a bar in a chart right on the chart.
    i've looked in cx 4.5 for the equivalent option, but did not see one.
    after looking at some of the chart samples, i noticed that i did not see this
    am i correct that this is not an option in cx?
    thank you
    tracy

    HI, Tracy
    In CX 4.5 Pro the option is in the following Path
    --> Double Click on the Chart from the Properties Window select the Appearance tab
    --> Now from the Title Button you can select or unselect the Show Legend Value
    Now the problem is that you want to display the Values but it display the Numbers as if there are categorize 1 to 9 than it show the Number from 1 to 9 and color of that Category in the Chart.
    But we can do a trick through you can achieve your Requirement.
    Like Just right side of you Chart Place a List View or Table view and Point the display Values of that Control to the Values you are displaying in the chart.
    In this way you will be able to display the Category name and amount in the right side or any where you want.
    Hope this help you to solve out your problem,
    Please Reply if any Issue,
    Kind Regards,
    Faisal

  • Are Multiple cfchartseries/seriescolor Values for Bar Chart Possible

    Client wants their reporting bar charts adjusted to show
    green bars when counts are better than 90%, yellow when better than
    80% but less than 90% and red when below 80%. It is possible to
    have multiple series color based upon count values?
    <i>If not, I would recommend this as a future nice to
    have capibility.</i>

    HI Smitha,
    Then try this.
    Create a formula. Inside Just use the Round function to round your Keyfigure.
    Then use this formula to be displayed in the Chart Experts, Data Tab on the Show Value column.
    Let me know if it works.
    Regards,
    Vinaya Paulraj.

  • How to add multiple values in bar chart.

    I have three fields.
    1) Buyer Name:
    2) Number of PR
    3) Number of PO
    I want to display 2 and 3 in values corresponding to 1 (Buyer name) by using bar chart. I can display one filed either number of PR or PO but cant both in one chart.
    How can i do this.

    You should be able to do that,
    Multi-valued Bar chart.
    drop me mail with xml and template you have, along with required output.
    Id is n my profile.

  • How to display value in waveform chart

    dear sir
    i am using labview 7.0 with dsc module for scada.
     now i want to display the difference between two tags value in waveform chart. Also i want to display that difference value on y axis and system date and time on x axis continously. Also if there will change in that tag value then there should be reflection of that value on wavwform chart with system time. Really i am in trouble. please help me.
    falgandha mohire

    Nadim,
    Why would an XY graph be preferable to using a Waveform Chart where the "t0" is the time of the measurement?
    I don't get it.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Negative values in Bar chart

    Hi,
    I have to plot negative values in a horizontal bar chart. Only the +ve values of the data column comes up in  the bars,
    How should i modify the xsl code
    Thanks in advance
    Krishna

    Hello,
    XI3 has several types of horizontal charts and there are some that seems to describe your requirements.
    I attach some pictures allowing you to see if it meets your needs.
    http://imageshack.us/photo/my-images/207/generalkg.jpg/
    http://imageshack.us/photo/my-images/513/deski1.jpg/
    Regards,
    Philippe

  • How can we place values "onto" bar charts?  (Example Included)

    We need help! We don't know how to do this:
    Using Graphics, we are trying to place values onto a horozontal
    multilevel bar chart created with Oracle graphics from an Oracle
    report. We are trying to have the report dynamically place the
    values "ONTO" the bar(s) itself, so that the "reader" of the
    report can see the value associated with the bar, by looking at
    the value we've "overlayed" onto the bar. See this example:
    $10,000 | $5,000 | $5,000 | $20,000
    $ 8,000 | $5,000 | $5,000 | $18,000
    $ 5,000 | $10,000 | $15,000
    Please call or email:
    Shawn
    Cell: 214-649-0706
    email: [email protected]

    There is a solution to this somewhere on this forum. If I understand it correctly you can select the chart, right click, select field templates. Select the axis field tab. Enable the label check box. Select desired radio button from label rotation.
    Counts should appear above the bars.

  • Display a series in chart conditional

    Dear all,
    I created a new chart region and this chart I created 6 series. I created 6 flags to tell which series to display. Is it possible to add a condition in a series to tell if we want to display or not.
    I can put it in the select, the line is not displayed but I see the name in the legend and I don't want to see it.
    Is it possible to do it and how ?
    Thanks in advance

    Dear all,
    I created a new chart region and this chart I created 6 series. I created 6 flags to tell which series to display. Is it possible to add a condition in a series to tell if we want to display or not.
    I can put it in the select, the line is not displayed but I see the name in the legend and I don't want to see it.
    Is it possible to do it and how ?
    Thanks in advance

  • Creating Bar Charts using Java and Display in jsp

    Hi..Is it possible to create a servlet that processes data from database and display the values as Bar Charts in jsp pages. If its possible, is there any examples on how to achieve that?

    I don't get it. You already know what needs to be done to solve your problem, the only thing you are missing is the HOW. That's the easy part, if only you break down what you have to know:
    1) how do I show an image on a website (this is a basic HTML question actually, not actually related to servlets/JSPs directly)
    2) how do I fetch the path from a database (JDBC question) so that I can use this path to link to my image on disc
    So what is preventing you from figuring out how to do these two simple tasks? Some clever google searches should give you all the information you need in no time.
    by the way: are you sure that you need to store these paths in the database? Is this part of some file upload component?

  • Displaying BAR chart using JSPChart , Sysbase database, Jrun server

    I would like to explain my requirements to you.
    1. I will be displaying a Exponential bar chart. The length of bar chart is obatined from Sybase database.
    2. This chart should be dynamically created depending on the value on the database and x -axis is exponential.
    This will be displayed on a HTML page.
    Hope this is clear. Basically, I want to show the database values using a chart on a Web Page.
    Can this be done, if so, pl give me further info if possible.
    I have downloaded JSP chart from
    http://www.javaside.com/asp/menu_fr.asp?page=jspChart.shtml
    Pl reply ASAP.
    Thanks in advance

    Serious fraud allegations leveled against Elansoft, in the web pages: http://www.manero.org/weblog/archives/000083.html
    or
    http://archives.real-time.com/pipermail/cocoon-users/2003-March/031298.html .
    If the charges were not true, Elansoft might have angrily denied. Instead, Elansoft closed US office and ran from the law. If Elansoft continue to evade the laws, what kind of legal protection buyers could get from the legal system?
    These are credible charges, because, it is impossible to believe Agileblox could get more votes than OpenOffice (which has been downloaded by millions of users) and more votes than SVG-technology itself (which has support of tens of thousands of die hard developers, and many companies building products around the technology).
    In the news release, Pravin Raju, CEO, said Agileblox rated higher than products from Sun, Oracle and Macromedia:
    http://www.blonnet.com/bline/2002/10/11/stories/2002101101590900.htm
    The CEO may be ignorant enough to know, that all those products are well known and financially successful. There were hundreds of news article published in respected technology journals about each one of them. There are many developer groups (Ex: user-groups and discussion forums) about each of them. Each of these forums patronized by thousands of developers each month.
    Is there any detailed product review for Agileblox out there? How about any freelance discussion? May be too stupid to participate in technical debate? What about, at least one use case presentation from a �real- happy customer? The crooks committed fraud. Pravin Raju, CEO of Elansoft, shamelessly claimed his product had rated higher than many respected products. What a moron?
    Look at Agileblox documentation and flowchart. Does the flowchart make any sense, or look like work of a software guy? Does Elansoft know any thing about product development? Why they have not able to release any upgrade to Agileblox for so long? Who developed Aileblox? Are they still working at Elansoft?
    P.S: Please send any information and names of the players of the Award scam to: [email protected]

  • Stacked Bar Chart - SVG

    Hi,
    My department is conducting a series of SWOT sessions. Each item submitted during the sessions is given a category (such as Project Management), a quadrant (such as Strength), and a participant (such as Staff). I'm trying to display a stacked bar chart that will show the amount of items per quadrant for each category.
    I ran into, what looks like, the common bug with null values being returned. I tried to fix this using the query below. I use the same query below for 4 series (Strengths, Weaknesses, Opportunities, Threats) and hardcode the quadrant name accordingly (is that correct?). If only one series exists, the graph works fine. If more than one exists, the graph does not display (no error is given, it simply does not display). Does anybody have any insight? Am I taking the wrong approach with my query?
    select null link, c.category_name label, nvl(count(i.item_name),0) value
    from swot_item i, swot_category c, swot_quadrant q
    where i.item_category = c.category_id
    and i.item_quadrant = q.quadrant_id
    and q.quadrant_name = 'STRENGTH'
    AND (instr(':'||:P1_CATEGORY_LIST||':',':'||i.item_category||':') > 0 OR TO_CHAR(:P1_CATEGORY_LIST) = 'ALL')
    AND (instr(':'||:P1_PARTICIPANT_LIST||':',':'||i.item_session||':') > 0 OR TO_CHAR(:P1_PARTICIPANT_LIST) = 'ALL')
    group by c.category_name
    union all
    select null link, c.category_name label, 0 value
    from swot_category c where c.category_name not in (select c.category_name
    from swot_item i, swot_category c, swot_quadrant q
    where i.item_category = c.category_id
    and i.item_quadrant = q.quadrant_id
    and q.quadrant_name = 'STRENGTH'
    AND (instr(':'||:P1_CATEGORY_LIST||':',':'||i.item_category||':') > 0 OR TO_CHAR(:P1_CATEGORY_LIST) = 'ALL')
    AND (instr(':'||:P1_PARTICIPANT_LIST||':',':'||i.item_session||':') > 0 OR TO_CHAR(:P1_PARTICIPANT_LIST) = 'ALL')
    group by c.category_name
    Thanks,
    Brian

    Brian,
    Which version of APEX are you using? In 3.0, you can use a Flash chart, which supports a single query for all 4 series like this:
    select null link, c.category_name label,
           sum(decode(q.quadrant_name,'STRENGTH',1,0)) "Strengths",
           sum(decode(q.quadrant_name,'WEAKNESS',1,0)) "Weaknesses",
           sum(decode(q.quadrant_name,'OPPORTUNITY',1,0)) "Opportunities",
           sum(decode(q.quadrant_name,'THREAT',1,0)) "Threats"
    from swot_item i, swot_category c, swot_quadrant q
    where i.item_category = c.category_id
    and i.item_quadrant = q.quadrant_id
    AND (instr(':'||:P1_CATEGORY_LIST||':',':'||i.item_category||':') > 0 OR TO_CHAR(:P1_CATEGORY_LIST) = 'ALL')
    AND (instr(':'||:P1_PARTICIPANT_LIST||':',':'||i.item_session||':') > 0 OR TO_CHAR(:P1_PARTICIPANT_LIST) = 'ALL')
    group by c.category_name- Marco

Maybe you are looking for