Display variant for transaction FBL3N - can it be protected?

Hi,
I have made a display variant for transaction FBL3N (G/L account line item display).
Can I protect this variant?
I don't like other users to overwrite it.
Thank you.
Kind regards,
Linda

Hi Linda,
Line layout variants depend on a few things.
1 authorizations.
you need to make sure general users cannot change the standard layout. This is done via settings, layout, administration.
2. Personal variants, you can create your own variant and set it up just for yourself.
This can be done by selecting the user specifc tick box. The naming will have to be different but a user wont be able to see or change your variant.
3. Lastly you can set your variant in FB00, however all this does is assign a variant to a user, someone with either the correct authorization or a variant that is not a user specific one COULD be changed.
Hope this helps.
Please award points if useful.

Similar Messages

Transaction Variant for Transaction FV60 (Parked AP Invoice)

Hi All:
I have been successful in creating a transaction variant for transaction code FV60 (Park AP Invoice). My objective was to get rid of the post and save as completed buttons on the FV60 screen. But when I simulate the document, the post and save as completed buttons appear again and I have been unsuccessful in getting rid of these and deactivating/hiding them.
Can anyone please help me or has anyone done this before?
you help is very appreciated
thanks
Brian

Hi you can hide the button as follows;
While doing SHDO Variant Creation , in the confirm screen entries dialog press Menu Functions button and in the dialog expand Function setting tree and select BU (POST) and press Deactivate button (or F2 key) then select PBBP(Save as completed) and press F2 again.
Now save the variant and activate it.
Now check the tcode, those two buttons will be hidden.
This will solve your problem.
Regards
Karthik D

Display Variant for VKM1

Can someone please guide me thorugh creation of a display variant for thrasaction VKM1?
Thanks a ton
VH

Hi,
Execute the report, after you get the output from menu "_S_etting -> Layout -> Save". This variants are called ALV variants.

Delete Variants for Transaction MASS

Is it possible to delete multiple variants for transaction MASS?
I am aware variants can be deleted one by one using Goto... Variants... Delete. However, I would like to delete over 200 variants which are no longer required.
Surely there is a standard function? Deleting hundreds of variants one at a time is not an option. Contracting an ABAP programmer is not an option.
Thanks for your advice.

Hi G. Lakshmipathi,
Your suggestion to use BDC recording worked like a charm.
However, I am still surprised that there is no standard function.
Thanks for your help.
Regards,
Nathan

HOW TO Create variants for transaction MASS on LFA1 object?

hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PM

Hi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank.

Problem while creating transaction variant for transaction KCH1.

Hi All,
I am trying to create transaction variant for KCH1 transaction code.
I am able to deactivate standard navigation options Change, Copy, Delete for the menu called "Group" in the main screen.
But I am unable to disable the standard navigation options for the menu u201CGroupu201D in the second screen where we enter possible profit center values in hierarchal structure. I want to deactivate u201COther Groupu201D , u201CChangeu201D and u201CCopyu201D In the hierarchy screen.
Please advice.
Thanks & Regards,
Padmasri

Hi,
As I have already mentioned in my previous message, I am able to deactivate standard menu options by using Menu functions for Main screen where we provide Profit center group value which needs to be created. For this screen I have passed GUID START_CO and was able to deactivate required options. But for the Hirarchial screen, I am unable to deactivate some of the menu options. In menu functions I have passed LIST_01(GUID for the screen) and deactivated the options but was not reflecting which testing the transaction variant.
Anyone please let me know if transaction variant work for my scenario. If no please suggest a solution.
Thanks & Regards,
Pratima

No line item display possible for account -fbl3n

Hi,
No line item display possible for account ,
i'm getting the abv error when run fbl3n .. pls tell , how to resolve it..

Dear,
It means no data found for your requirement.
If you want to find out the list on base of G/L please enter G/L and click on all item.
Other wise if you want to see only open item then click on open item and remove date from field of open item date.
Also click on noted item and click on execute button
Regards,
Mahesh Wagh

I made a new folder for my photos for my iphone4, can i password protect it?

i made a new folder on my phitos, can i password protect this new folder?

No. There are several apps that offer this. Search the app store.

Creating a User-defined Selection variant for Transaction ME21N

Hi,
In transaction ME21N with the 'Document Overview' feature turned on we can view a list of standard selection variants. I would like to add a user-defined selection variant to that list. There is an OSS Note 377180 present which describes how to do that but(as per transaction SNOTE) that note cannot be implemented in our system. Is there any other way to get that done?
Any help would certainly be appreciated.
Thanks,
Alam.

So I am having a similar issue. I have a fixed length flat file with 3 different record types.
1 a header ( length is 82 bytes with the first byte set to H ( single record always the first )
2 a detail record ( length is 382 bytes ) with the first byte set to D ( multiple records )
3 a trailer record ( length is 82 bytes ) with the first byte set to T ( single record always the last )
I created a UD OTD with 3 elements for each record type, RECORD_TYPE is the first field 1 byte. Matching for each on either H,D, or T. When I try and test the OTD with the Run Test button I get an unmarshal error
<SOD>""<POS>"HACCUMULAT..." failed input match, Fog#431, after <no path>: failed node: trailing junk in fixed/parent
HACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825 0 0
D ar3531 ar3531 ar3531 ar3531000 55887027260 30.000 30 5098765 20080804 000T114 120080806 82820P30000001024511 25.00 0.00 25.00 0.00 25.00 25.00 0.00 0.00 0.00 0.00 0.00T
TACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825 2894 0 0
Not sure whats going on, so if anyone has any suggestions on where to look that would be great
Thanks

Transaction Variant For Me21.

Can i create a transaction variant for transaction me21.
if yes, please tell me the procedure.
please help.
its urgent.

hi
good
i think you can do it , because Transaction Variants to make fields Mandatory, Hidden or Display. Also applicable to screens and tabstrips.
You can hide unwanted screens and fields in any of the standard SAP programs without changing any of the standard programs. Additional features such as making the variant as default on the standard SAP transaction code is only available as of 4.6x.
In 4.6c, you can default your transaction variant as the standard variant. (SHD0 - Edit -> Activate/Deactivate as standard variant)
thanks
mrutyun^

Transaction Variant for XD02

Hi All,
I have been exploring how to create/use a transaction variant for transaction code XD02. I have already done the first part of my requirement, which is to disable the screen fields of other General Data of XD02. Now, can I limit the access of the transaction variant to a specific customer account group?
Thanks in advance for your suggestions.
Regards,
Ranilo

Hi,
If you have done the Transaction variant for a particular transaction which means its global(For all account groups). So to meet requirement search any user eixt or badi is avaialble..........
Regards
Ramakrishna Pathi

Transaction Variant for VA01

Hi All,
I am able to create transaction variant for transaction code MM01, XD01 and XK01 successfully. But i am unable to create transaction variant for VA01.
And also some times i am getting error message "SAP Object SCV1(short text of variant) cannot be assigned to package ZXXX". Can you pls let me know why i am getting this error and why i am unable to create transaction variant for VA01 successfully.
Thanks,
Raju

Hi,
There is no difference in creation of the transaction variant for VA01/02. But the way it works is different. It works at order type level instead of t-code level. You have to create the variant in SHD0 and assign the same in order type customization.
Alternatively you can populate the field TVAK-VARIANT with the transaction variant name in MV45AFZZ subroutine USEREXIT_MOVE_FIELDS_TO_VBAK/USEREXIT_FIELD-MODIFY. With out this it wont work. Just try to change the TVAK-VARIANT value in debug mode and see if it works fine. Surpricingly it works fine if you individually execute the variant.
The error you mentioned might be because you might have given one of the screen variant name not starting with Z or Y.
Thanks,
Vinod.

Transaction variant for f-58

hi all,
i need to know how to create screen variant & transaction variant for transaction code : F-58 ?
When i try to create screen variant for F-58 I get an error:
"screen variants are only possible for dialogue transactions".
Thanks & regards.
Message was edited by: annie sidd

Screen Variants
http://help.sap.com/saphelp_nw04/helpdata/en/7d/f63a22015111d396480000e82de14a/content.htm
Screen Variants Course
http://www50.sap.com/useducation/curriculum/course.asp?cid=60142840
If you find this answer useful, please reward me for the same.
Good luck

1 custom field not showing up for modification in new List Variant for KS12

Dear SAP Experts,
I need some help regarding list variants using custom fields. I made a new List Variant for transaction KS12 using a few custom and standard fields. The custom fields are in CI_CSKS structure. I did all this according to not 95080 using option two (Adjust screen 1399 in function group KMA1). I got the header to display the name of the fields in SE51. The strange things is that after I start KS12 with the new list variant one of the custom fields doesn't show up for modification if there is no value in it where this is not the case with the others. That is if there is no value in it already (even on character) I can't enter new values in to it, which beats the purpose. I checked the attributes of the the custom fields and they are all the same, unless I missed something.
Does anyone have an idea why this could be?

Hi Michael - I too have exactly the same problem in Lion. It seems to be a bug.
A minor one, given all the other much larger issues I have with Lion.
I'm living with it in the expectation that someone will fix it. I notified it ages ago - long before the recent Lion update.
I am mainly using Snow Leopard. This problem doesn't happen in Snow.

Setting display variant in BDC

Hi Guys,
   I am trying to set a particular custom display variant for item layout during BDC for MIRO. I am able to populate the MIRO screen field RM08M-ITEM_LIST_VERSION with the correct variant name, but the layout does not change accordingly. I tried doing a recording for this, but even in the recording when I try to switch between variants the layout does not change.
My questions are:
1) Am I doing someting wrong here?
2) Is this something which can be done through BDC? If yes, how can I do this?
Please let me know.
Regards,
Nanditha

Hi Nanditha,
You have to change the options when you do the call MIRO.
Parameter NOBINPT in OPTIONS must have the value 'X'.
Define the OPTIONS structure:
DATA: LF_OPT LIKE CTU_PARAMS.
Give the OPTIONS parameters a value:
MOVE 'E' TO LF_OPT-DISMODE.
MOVE 'S' TO LF_OPT-UPDMODE.
MOVE ' ' TO LF_OPT-CATTMODE
MOVE ' ' TO LF_OPT-DEFSIZE.
MOVE ' ' TO LF_OPT-RACOMMIT
MOVE 'X' TO LF_OPT-NOBINPT.
MOVE ' ' TO LF_OPT-NOBIEND.
CALL TRANSACTION 'MIRO' USING BDCDATA
                        OPTIONS FROM LF_OPT
                        MESSAGES INTO ERRORMESSAGES.
Regards,
Frans

Display variant for transaction FBL3N - can it be protected?

Similar Messages

Maybe you are looking for