Display Vehicle Technology tab in IE01

Hi Experts,
When I am creating a new Equipment using IE01 Tcode, only the following tabs are getting displayed
General,Location,Organization and Structure.
I want to display 3 more tabs as given below
Structure, Vehicl ID/Measurements and Vehicle Technology tabs.
When I use IE31 to create a fleet all the above tabs are getting displayed.
Kindly suggest how to enable Structure, Vehicl ID/Measurements and Vehicle Technology tabs in IE01.
Regards,
Sam

Hi Sam,
You want to display the view profile for fleet equipments in IE01, for that you need to select the object type in IE01 T-Code,
Once you select the object type similar to the vehicle type available in IE31 T-Code you will automatically get your required view profile.
AR

Similar Messages

Consumption data in vehicle information icon of vehicles-technology tab

Dera Sir,
I do not find any data in the 'consumption data' window which pops up when the 'vehicle information' icon is clicked which is in the 'Vehicles-Technology' tab page of Vehicle Master Data.I have created measurement documents via IFCU.
Please guide how to see data in that window.
Thanks and Regards,
R N Sabat.

Problem solved !
Measuring position was not maintained for key figure IAMENDISTT and IAMENFLVOL in customizing:
Plant Maintenance and Customer Service > Information Systems for Plant Maintenance and Customer Service > Configure Measurement Document Update
Regards,
Saif Ali Momin

Fleet Material Consumption Field "Vehicle Technology" Tab

I am trying to utilize the gas station function within the Fleet Management Settings of SAP.
I have made the following configuration:
Settings for Fleet Management > Consumption-Relevant Counter Reading Update > Define Tolerance Check for Usage Control
A      Short-term Tolerance     "Check"    10     10   Information
Settings for Fleet Management > Consumption-Relevant Counter Reading Update > Create Gas Station
0010 Fuel Pump 0010   9999
Settings for Fleet Management > Consumption-Relevant Counter Reading Update > Assign Auxiliary Materials and Consumables
Gas            Gas           0010    "Check"
Settings for Fleet Management > Consumption-Relevant Counter Reading Update > Define Key and Cost Object for Updating Material Documents
A     Unleaded Gas        03           261           262       "Standing Order Checked"
I have activated the PLM extension as well as the LOG_EAM_CI_3 Business Functions
When I go to the Material Consumption field and click the drop down nothing is appearing and it gives me the message
Vehicle-specific F4 help cannot be processed
     Message no. ITOB_FLEET113
Diagnosis
     An error occurred during the processing of the F4 help for a
     fleet-object-specific input field.
Procedure
     Check your entries and, if necessary, your Customizing.
Procedure for System Administration
     Normally the Enterprise Add-On (which has the functionality of
     consumption recording for fleet objects) must be available in your
     system. However, if this is not the case, then this also leads to the
    above message. If the Add-On has not been brought in, then the affected
input field should be deactivated in Customizing (using the field
selection).
Are there more business functions that I need to activate to make the material consumption for fleet work?
Thank you

Here we define the settings for calculating the cost of the material. Generally we take a standing order for the cost collecting. And what the key for material consumption we are creating here, we have to use it in the Fleet master data for cost calculation.
For calculating the cost following are the essential things:
i. Create a Normal PM01 order. Assign that material to the order with the open quantity. And release it.
ii. Assign this order in the standing order field of that fleet Object.
iii.. Run the transaction IFCU. And when the material will be putting there, the inventory will be detected and the cost will automatically be updated in the actual cost field of that standing order.
iv. One more thing the IS of Vehicle consumption data is S114 and for Order (almost all standard IS). These all IS should also be updated with same Period (May be days wise or month wise but period should remain same.)
I have followed the above steps. The only 2 I am not certain of is the following:
i. "Assign that material to the order with the open quantity."
I assumed that this means in the work order I do not put any quantity in there.
I have my material, a reqmt qty of 0.00 (because I did not fill anything in), unit of measure, storage location, and plant
iv. What do you mean by all IS shuld also be updated with same period. Where do I find this?
Thank you,

How to display a specific tab in a screen after a popup message

Hi all,
        I've a rewuirement where in i need to display a secific tab in a screen after popping up a warning message. To be specific, when i choose 'Yes' in the popup window, it shoud take me to a tab which is not active while displaying the warning popup.
Thanks in advance....
Anil Kumar Japa

Hi
U need to active the tab you want to show:
So you should set the ok_code (of the tab) value to field ACTIVETAB
<TABSTRIP>-activetab = <OK_CODE>.
And transfer the value of subscreen number to the subscreen area:
CALL SUBSCREEN SUBSCREEN1
             INCLUDING G_CTRL_TABSTRIP-PROG
                       G_CTRL_TABSTRIP-SUBSCREEN.
Max

Entitlements not getting displayed in Entitlements Tab - OIM11gR2

Hi Experts,
I am trying to provision entitlements to users by requesting entitlements. When i successfully provision entitlements, the entitlement is getting displayed in accounts tab, child form. But the same is not getting displayed in entitlements tab of the user.
Please kindly guide me
regards

Verify below steps:
1. Marking Entitlement Attributes on Child Process Forms
http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/appinstance.htm#CHDFFEEE
If you have already marked it then fine. else create new version of form and add property Entitlement=true. activate this . make sure the parent form having the latest child form. goto parentform->child tab and verify the child form version.if not create new version for the parent form and activate this version.Automatically it will pick the latest child form
2. Run Below scheduled task
a. Entitlement List scheduled task.
b. Entitlement Assignments scheduled task

Support messages not getting displayed in Messages Tab - Solar01/02

Hi,
I am having an issue in displaying the support messages under the message tab of Solar01 and Solar02. If I try to create a new message, the notification pops up and also gets saved. But the message does not get displayed under the tab.
I can find that the message is properly created through transaction monitor.Even if I try to manually assign the support message number in Messages tab it gives an error saying the number does not exist.We are using SOLMAN 4.0 SP 11.
Please help. Points will be awarded for useful answers.
Regards,
J.Prabananth

Dear Prabanath,
       I am not too sure you will be able to assign numbers to support messages. Run the report CRM_DNO_MONITOR and get the full number from the report and insert the ticket number in issue messages tab and click on save and go back one screen, it will ask you if you want to save, select yes.
   That worked for me. Recently I have strugged to resolve this. We are on Solman 4.0 SP12. Check if you have all necessary permissions for you and do you have any thing in sm21 or st22 by any chance if the issue is related to support pack ?
     Let me know if there are any issues. I might be able to help you.
N

Short dump while displaying a particular tab

hi all,
In a user exit, in IW32 transaction i am displaying a particular tab after a popup warning box. I am able to display the tab i wanted to using field-symbols and changing the T185 at runtime (i changed the build group and panel fields at runtime). but after displaying the screen, if i click on header tab it is giving me a short dump. the error is raised relative to CAUFVD_UPD-INDBT and the error is "ERROR WHEN READING ORDER HEADER WITH INDEX". can anyone explain me what could be the problem? and a possible solution to avoid it.
thanks in advance,
Anil.

Hi Santosh,
I'd suggest to follow as per SAP Note: 568768 - Analysis of SQL Errors causing Shortdumps or Error messages. The Note contains precise steps to analyze such an ABAP dump.
cheers
m./

Can't get display settings / destop tab back after removing it with GPO

I'm running ZEN32SP3. I'm just getting started with GPO in WinXP. I
inadvertently removed the desktop tab in the display settings and can't seem
to get it back. Can anyone help me out?
Thanks,
brad

Thanks.
"Rolf Lidvall" <[email protected]> wrote in message
news:AIVEc.1848$[email protected]..
> > I'm running ZEN32SP3. I'm just getting started with GPO in WinXP. I
> > inadvertently removed the desktop tab in the display settings and can't
> seem
> > to get it back. Can anyone help me out?
>
> The setting is here:
> User Configuration -> Administrative Templates
> -> Control Panel -> Display
> -> Hide Desktop tab
>
> The setting goes here:
>
> [HKEY_CURRENT_USER\Software\Microsoft\Windows
> \CurrentVersion\Policies\System]
> Value Name: NoDispBackgroundPage
> Data Type: REG_DWORD
> Value Data: 0 = disabled, 1 = enabled
>
> If you would like to start from square one
> on the WS, this TID explains how to clean:
> http://support.novell.com/cgi-bin/se...?/10059171.htm
> Follow 1-5, skip 6 (unnecessary)
>
> Regards
> Rolf Lidvall
> Swedish Radio (Ltd)
>
>

Work Order field define and display in Operation TAB

I have a question about the user field define in work order's operation:
I define the user field in the standard IMG for operation's Enhancemen use. but the field can only display in the operation's details' Enhancemen Screen.
What I want is the User field can display in the Operation list screen.
BTW:what does the Equipment numnber in Operation TAB 's meaning
thanks a lot

Duplicated [here|Work Order field define and display in Operation TAB;

Display Both Excise Tab And Customized Tab in MIGO header screen

I want to display both Excise tab and My customized tab in header screen in MIGO..But I have seen at a time one tab is displaying.Can anybody tell me
how I want to diplay both tab at a time??

Hi DEBDATTA PANDA,
In MIGO - Excise tab is showing as a part of customization. In PO if tax values are available that values will show in migo(drop down will show capture/refer /capture+post few more ) under excise tab.
pre req. is mat + Vendor +plant need to be excisable .
Now on your Customized tab is purely a Z development.only you can tell .
Also , if you are not seeing excise tab in migo , it means either config or master data missing for material code , Vendor, Plant
regards
manu

IPad can find cellular connection settings no longer displays View Account Tab

yesterday iPad could not find cellular data connection...Settings under cellular data no longer displayed View Account tab. (Image below is from my older iPad to show what is missing on newer one with the issue.)
iPad then displayed notification that it could not connect to cellular data and said to restore iPad.
I tried to restore via cable to iTunes on home iMac. All attempts failed.
By the way I checked the AT&T Accout which is a grandfathered "unlimited" act that is current and up-to-date
Can anyone help?

I would take the SIM out and then reinsert it. Next I would restore from backup. Lastly I would restore to factory new to see if it works in that condition before you add things to the iPad.

Display only Subcommunities tab

Is it possible to only display the Subcommunities tab for the Community page navigation?

Take a look in the How to hide the page links of a community on the 5.0.2 portal and Navigation modification message threads.

Part 1 generated while creating migo but display mode Excise tab not appear

Hi
I created migo Part 1 generated. and excise tab also appeared.
but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated.
Please explain What could be the reason
Regards
sitaram

Hi
Please any body give me valuable suggesition.
Thanks and regards
sitaram

Every time I start Firefox, the upgrade/signup page is displayed in one tabe while google, my start;up page s displayed in another. How can I stop the firefox page from loading every time?

Every time I start Firefox, the upgrade/signup page is displayed in one tab while google, my start-up page is displayed in another. How can I stop the firefox page from loading every time?

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Hide technology tab

Dear all,
can anyone tell how do we hide the technology tab from the work center master data...? i deleted the technical data from the t code OIZU still the tab is coming...
Regards,
Joseph

Dear all,
Issue is solved by giving screen sequence 0007 - Production line instead of 0001 - amchine in the t code OP40. Thanks all for your help...
Regards,
Joseph.

Display Vehicle Technology tab in IE01

Similar Messages

Maybe you are looking for