Display will not let CPU sleep

I have a custom built CPU with a NVIDIA Quadro FX 380 LP graphics card, and a Lenovo monitor #LI2321swA connected with a HDMI cable.  I just recently hooked the two units together with the HDMI cable and now the monitor will NOT let the CPU go to sleep.  The monitor keeps displaying the message  "Power Save Mode" or some thing similiar.  I can not figure out how to turn this feature off or how and what to set in control panel to change this.  There was no instruction sheet, manual or CD with the new monitor, bummer.
kenz5103

After searching online I now see that there are lots of issues with Minis not waking from sleep. To clarify, my issue is not just when the machine has been asleep for a long time—the problem occurs just as frequently immediately after I put it to sleep. I have been keeping my Energy Saver settings for both computer and display at "Never," and just turn the display off manually when I know I'll not be using the computer for any period of time.

Similar Messages

  • My mac mac book pro w retina display will not go to sleep when I close the lid or put it to sleep.

    My mac mac book pro w retina display will not stay asleep when I close the lid or put it to sleep.
    I put the computer in my bag and when I open it again the machine is so hot I can almost not touch it.
    I am affraid that the hardware is allready fried.
    Also when I press a key to restart after it has been idle for a few minutes it often takes up to a minute to wake back up.
    This machine is bran new..
    What should I do?

    Try a SMC reset:
    http://support.apple.com/kb/ht3964
    If no success, then use your warranty and bring it in to the nearest Apple repair facility for rectifying this problem.
    Ciao.

  • Display will not sleep any more after waking from sleep

    My Macbook has recently started misbehaving after waking from sleep. Started putting the entire MB to sleep each night by closing the lid. When I wake it in the morning everything seems normal, no error messages. However from that point forward the display will not dim or sleep. I've tried re-applying my settings in System Preferences -> Energy Saver. Pretty much the only fix has been to reboot, which is annoying and Windows-like.
    In the interest of full disclosure, I have "fast sleep" enabled (aka hibernation mode disabled) but I've had that since I bought my MB with 10.5.1 on it. So I don't think it's related. In fact I changed to the default Energy Saver profile to see if that fixed the problem (it didn't), which re-enabled hibernation mode and I then had to re-disable hibernation.
    I want to say this started happening after the 10.5.4 update, but that may have been a coincidence as to when I started sleeping it each night... I don't exactly remember.
    I downloaded Cocktail to run all the cron jobs, etc, that don't get run when sleeping at night, and that didn't help either.
    Any suggestions? Anyone else ever see this? Seeing it now?
    Thanks!

    This is still an issue for me.
    I sleep my Macbook every night by closing the lid. After doing this a few times, the display either stops sleeping, or stops locking. I have the lock menu in the Apple menu bar, and even selecting "Lock screen" will not work.
    Sometimes a reboot fixes it, sometimes I have to reset the SMC.
    Any info out there?

  • HT1766 My iPad hasn't been backed up and it's displaying the msg but will not let me get rid if the msg so that I can get it backed up. How do I get through this

    My iPad hasn't been backed up and it's displaying the msg but will not let me get rid if the msg so that I can get it backed up. How do I get through this

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • HT1923 I have an IPad that has the apple displayed and it does not show in ITunes.  It will not let me turn it off.  What do I do?

    I have an IPad that is displaying the Apple with the bar under it.  It will not let me turn it off and it does not show up in iTunes so I can't do a Restore.  Can I do a Hard Reset?

    You need to subscribe to iTunes Match to store your music on iCloud:
    http://www.apple.com/itunes/itunes-match/
    To transfer iTunes Store purchases made on your phone to your computer, connect your phone then choose "Transfer purchases..." from the File menu in iTunes.
    Photostream transfers photos taken on your iOS devices to other devices and your computer. For troubleshooting Photostream see: http://support.apple.com/kb/TS3989

  • My imac display will not sleep

    I set it to one minute and wait and the display will not sleep

    I set it to one minute and wait and the display will not sleep

  • My ipad will not let me slide to log in, or power off. i have tried to hold down the sleep and home button at the same time, but that did not work. Do you have any tips for me? Thanks

    my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.

    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn phone off
    hold home button and plug cable into phone.  do not release home button until an itunes graphic appears on device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • HT1212 my ipod has "ipod is disabled connect ti itunes" but it will not let me put in the passcod or anything! i cant get off this display?

    my ipod has "ipod is disabled connect ti itunes" but it will not let me put in the passcod or anything! i cant get off this display?

    You have to restore:
    Forgotten Passcode or device disabled after entering wrong passcode

  • Safari on my iPad will not open, it will come up but will not let me type or display other than blank page.

    Safari on my IPad 4 will not open. It will come up but is blank and will not let me type a search or navigate anywhere.

    Also close all apps in the multi-task window
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

  • I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate... disconnect display, open lid laptop display will not activate... used to work fine.

    I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button.  Worked fine before Lion update.   Any Advice?

    Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
    Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
    The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
    I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine. 
    Had heard something about this happening w/ Lion but went ahead anyway. 
    Oh well...
    Hoping your pointer helps... will let you know how it turns out.  Thanks very much for responding!!!

  • Sent photos from iPhone to email and messenger on iPad intercepted but now will not let me see them. Help?

    Sent photos from iPhone to email and messenger on iPad intercepted but now will not let me see them. Help?

    If you sent the photos directly from the Photos app, it is quite possible that you selected Message rather than Mail when you emailed them to yourself. I assume that is how they ended up in the Messages app. I also assume that you no longer have the old phone or you could just email them to yourself again. Is that a correct assumption? If you cannot access the photos on the old phone any longer, and you can see them in the messages app randomly, try closing the Messages app completely and reset the device and then see if the photos reappear.
    In order to close the Messages app, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to Messages and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Logic will not let me edit Apple Loops in the Audio Window.  Any ideas?

    When I select a blue apple loop and put it in an audio track it works perfectly but when I go to the audio window it will not let me edit the Apple Loop. A window pops up and says "The requested action can not be performed because the edited file is an Apple Loop." In the manual it says that both green and blue Apple loops can be edited but every time I try to edit an Apple Loop that window pops up. It only does this for apple loops. What can I do.

    Hi there, this is because you cannot edit apple loops, other than cutting blue loops witht he scissors. If you want to edit/alter loops bounce them down to audio files, then you can do pretty much anything..
    cheers tommy
    DUAL 2.5GHZ G5 20" CINEMA DISPLAY 2.5GB RAM   Mac OS X (10.4.3)   LOGIC 7.1.1 MOTU 828 MK2 ISIGHT BT KEYBOARD AND MOUSE

  • Email will not let me change fonts all of a sudden.

    Email will not let me change fonts all of a sudden.  It says I don't have the neccesay permissions in ~/library/preferences.  this has just happened recently.

    Who is your email provider?
    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
    If yes, try deleting the mail account and adding it again.

  • HT4623 it says there is not update but it will not let me download and apps because it needs a new version of ios

    it will not let me download any apps it says that the apps are not compatiable with ios 4.2.1

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    Hey erinoneill24,
    Thanks for using Apple Support Communities.
    Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/ts1441?viewlocale=it_it
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    Have a nice day,
    Mario

Maybe you are looking for

  • Portlet PL/SQL in 9.0.2

    Hi Folks, I have built some portlets in PL/SQL that works fine in Portal 309. But now I need to install my portlets in Portal 9.0.2. Is there a step by step process ? I have not found the provsyns.sql script. The documentation that I found in portals

  • Assigning more than one G/L accounts to WRX

    Hi! I want to assign more than one G/L accounts to WRX, I knew that it can be done through general modification. I have defined like below: Valuation           General                   G/L accounts Modification        Modification IN     I01     240

  • Upgrade ODI Upgrade 10.1. 3.4  to 10.1. 3.5

    On windows 64bit 2003 server, with oracle db server 11.1.0.6 we have ODI Upgrade version 10.1. 3.4 in Dev Env. We have many projects/models and 100 interfaces in the current version 10.1.3.4 We want to upgrade ODI to 10.1. 3.5 1. What are the upgrade

  • Standard business contents are not installed in BI system

    I am new to SAP Basis Team,  Consultants are saying  that standard business contents are not installed in BI system. What package should I install or what is the steps I should Do. Following is the content of SAINT FINBASIS  --  600             -- 00

  • Https serverfarm with http sorry server

    Hello all,   I am having difficulty configuring a sorry server for an existing https serverfarm.  The sorry (backup) server is failing all connections and I think it's because I can not determine a way to differentiate ssl connections for the product