Display Windbg in the SYSTEM desktop (Winsta0)
Hi
here is my question, which forum for a question on SYSTEM Desktop ?
OS : Win2012 R2
I configure Windbg as default debugger with windbg -I
I want to debug a process spawned by my service. The Windbg catch the crash but is displayed in the desktop 0 of SYSTEM.
Is there any way to display this desktop 0 to get the stack of the crash ?
regards
Hervé
Hello HerveK.
I suggest you to ask this question in the Windows Desktop Debugging Forum. I can move it there for you if you want.
Bye.
Luigi Bruno
MCP, MCTS, MOS, MTA
Similar Messages
-
U310 Display not showing the entire desktop black section on right side of the display??
Normally this laptop has a monitor plugged into the HDMI port. One day during routine maintenance the laptop was unplugged from the HDMI port and ever since the display is not working. The entire desktop image is moved slightly down about a 1/4 of an inch and about an inch to the left leaving a 1 inch black unusable section of the display and moved the windows taskbar partially off the screen.
I have tried re-installing the drivers - system restore. Nothing seems to work. Is this machien broken?Hi Telecotek,
Thanks for the reply and sorry for delay in response.
As you have mentioned that the issue still persists, hence try to boot the system in safe mode and check for the issue.
Also try to uninstall the driver from the device manager and try to reinstall the driver and check for the issue.
Click here for the graphic driver for windows 7
Click here for the graphic driver for windows 8
Click here for the graphic driver for windows 8.1
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Why my macbook pro 15" retina late 2013 shows weird display spec in the system report.
Hi, my macbook pro 15" retina late 2013 displays screen resolution as 3360*2100 in the system report. As we all know that the 15" model of late 2013 macbook pro has the maxmium resolution as 2880*1800. So is there anyone has a clue?
Odd. Set the current resolution to "Best for Retina."
Start up in Safe Mode
Then reboot normally. Same issue? -
I like the default images Apple provides for the desktop but would like to add my own. I have desktop pictures set to change randomly every minute. Is there a way for me to add my own images to the categories (like 'Plants' or 'Nature') that are already in the Desktop and Screen Saver preference panel?
Thanks!luoqianhe wrote:
I like the default images Apple provides for the desktop but would like to add my own. I have desktop pictures set to change randomly every minute. Is there a way for me to add my own images to the categories (like 'Plants' or 'Nature') that are already in the Desktop and Screen Saver preference panel?
Thanks!
MacintoshHd>Library>Desktop Pictures -
How to get the system info in a network
Hi to all.
can any one tell me how to get the system related,like system name and logged user ,info in a network using java...
thnx in advance,
ashokThere is quite a bit of data that is stored in the System Properties. Run this little test app and it'll display all of the System Properties, what you are looking for may be contained in there:
public class Test {
public static void main(String[] args) {
System.getProperties().list(System.out);
} -
Shut off Powerbook Display without closing the Display
I just set up a great external monitor and everything is appearing on the external perfectly. There is nothing appearing on the PBs internal display except for the blue desktop background. I don't want the built in display to get burned with the blue desktop pattern. I am using the PBs keyboard as my main keyboard. Is there any way in Tiger to make the built in display turn off without having to use the display-closed mode so that I can continue to use the PBs keyboard?
Thank you!eww,
Duh! I thought that there would be more to it.
Thank you again, very much!!!
tenntooter -
In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.
AshwinVC wrote:
I reset the system and issue gets resolved.
How? -
iMac running 10.8.6 doesn't display entire desktop? Reset display to various options and it doesn't display the entire desktop. (asking for a friend, not my iMac)
I think you wanted to say 10.6.8. 10.8.6 does not exist.
The first thing I think is that zoom may be enabled. On Mac OS X 10.6.8, a way to disable it is to hold the Control key and scroll down with the mouse or trackpad until you can see the whole display. Another way would be to disable zoom in System Preferences > Universal Access -
I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user. Please help.
This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
· Is the computer on a domain?
· Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed." -
When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.Anyone?
-
I want to mirror my MacBook Pro's screen to my HDTV. I had it at one time by clicking the Mirror Icon on my upper menu bar but I do not have it any more?
What am I missing? In the System Perferences the display menu seems incomplete. There is no where in there to set my MacBook Pro to mirroring.
Can someone please help me?
I would apprecate any help I get.
ThanksThe mirroring selection is in the "Arrangement" tab and only shows up on the MacBook Pro LCD, not the external display.
-
I am in and out of my office with my MacBook Air. I would like to set it up so when I plug in my Thunderbolt display in the office, the Thunderbolt display has my desktop, menu bar and the open windows. If I set the Thunderbolt display to mirror by MacBook Air it adjusts to the lower resolution of the MacBook Air, which is a waste of a cool monitor. I can set it up as an extended desktop and drag the white menu bar to the Thunderbolt display so it displays my desktop but if I then disconnect my MacBook Air, the menu bar is absent and all the windows that were seen on that display are absent, as if it I was still attached to the larger display. The only way around this is to go to Thunderbolt display preferences, drag the white menu bar back to the smaller display and manually drag all windows to the smaller display before disconnecting. Doing this multiple times per day is a real pain. Is there a way to set my MacBook Air to recognize when it is attached to the Thunderbolt display and automatically my desktop and all open windows to it and then do the same process in reverse when I unhook it?
It's definitely not supposed to work like that...when you plug the display in, it should just turn on and adjust your displays. It works like that on my MBP. Kind of a silly question, but do you have the MagSafe from the display plugged in your MBAir too? Thats a requirement. Beyond that, it should "just work."
Not sure if there is some setting to enable...i haven't seen it. Call to support? -
I have been operating my MacBook Pro 15" (Mac OS 10.7.5), with Windows 7 - Parallels Desktop, for about one and one-half years. However, whenever I execute a Time Machine back-up, and leave the system to complete the process, I return only to find that my system has re-booted, long before the back-up is completed. I do not use the auto-backup feature because I do not see how to change the shedule for backups away from the default schedule of hourly backups (too my stain on performance). Is there something that I am missing in setting up for such a back-up? I am currently operating away from home, using wi-fi for Internet access.
Appreciatively, ArbyemI have been operating my MacBook Pro 15" (Mac OS 10.7.5), with Windows 7 - Parallels Desktop, for about one and one-half years. However, whenever I execute a Time Machine back-up, and leave the system to complete the process, I return only to find that my system has re-booted, long before the back-up is completed. I do not use the auto-backup feature because I do not see how to change the shedule for backups away from the default schedule of hourly backups (too my stain on performance). Is there something that I am missing in setting up for such a back-up? I am currently operating away from home, using wi-fi for Internet access.
Appreciatively, Arbyem -
My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is still readable. The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop. Can you point me to the best way to do this? - Thanks
If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7. Each version displays the page differently. Is there a way to make the display consistent on all systems?
As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7. Each version displays the page differently. Is there a way to make the display consistent on all systems?
Maybe you are looking for
-
I bought Iphone5 at 28th Sep, but the order status is still processing items?
I bought Iphone5 at 28th Sep, but the order status is still processing items? What is going on, is that ok ? although Delivers 24 Oct, 2012 - 31 Oct, 2012.
-
Invalid Serial Number with Acrobat 9.0
After performing an administrative install of Acrobat 9.0 an "Invalid Serial Number" error is thrown on installation. The error appears no matter how the serial number is given: typing it in, transform, or ISX_SERIALNUMBER=. The installation works wh
-
hey - i have searched as much as i can and it may just be me being an idiot but can anyone tell me if the sen stone plus does in fact have a sleep type function, where you can programme it to switch off after a set amount of time? i thought that was
-
Eclipse 3.5 (Galileo) + Coldfusion RDS Plugin
Hi, Just tried to upgrade my Eclipse to 3.5 and install the coldfusion RDS plugin. I have been using an older version with no issues. When I point my new eclipse to the old workspace, I can test all of the saved RDS connections and the connect fine.
-
Nikon D50 has not been on the list of tetherable cameras, I know, but I still got it working this March. Now, after an Aperture update (currently installed version now being 2.1.3) the D50 support seems to have disappeared. So, if there is anyone out