Display with alv

pls help on this
i declared one internal table with types.
types: begin of <name>,
       field
       end of <name>.
data: <name1> like standard table<name> with header line.
all retrived data i stored in <name1> internal table(contains about 74 fields in internal table)
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
  EXPORTING
    I_PROGRAM_NAME               = REPID
    I_INTERNAL_TABNAME           = '<name1>'
    I_INCLNAME                   = repid
   CHANGING
     CT_FIELDCAT                  = FCAT
  EXCEPTIONS
    INCONSISTENT_INTERFACE       = 1
    PROGRAM_ERROR                = 2
    OTHERS                       = 3.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM             = REPID
   IT_FIELDCAT                    = FCAT
  TABLES
    T_OUTTAB                       = <name1>
EXCEPTIONS
   PROGRAM_ERROR                  = 1
   OTHERS                         = 2.
if i do like this i am geting run time error.

*For Function module ALV (report)
  DATA: it_fieldcat  TYPE slis_t_fieldcat_alv,
        wa_fieldcat   LIKE LINE OF it_fieldcat.
  initialization.
  v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
       I_PROGRAM_NAME      = v_repid
       I_INTERNAL_TABNAME  = 'ITAB_EKKO'
    CHANGING
      ct_fieldcat            = it_fieldcat
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
  IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
  ENDIF.

Similar Messages

  • How to display the alv report blocks wise with out using the blocked alv

    Hi
    How to display the alv report with out using the blocked alv function module.
    Thanks
    Chinnu

    see this Standard Program
    RPR_ABAP_SOURCE_SCAN

  • ALV Hierarichal display with multiple line headings

    Hi,
          I have designed an ALV report with Hierarichal display with multiple line headings...
    When i change the layout of this report,the headings which we enter manually will not take effect.The column we can hide in the report using the layout management.But the heading remains the same since it was written manually in top of page.
    Is there any possiblity to work out the Manual headings based on the layout fields.

    Hi,
    Do you use REUSE_ALV_HIERSEQ_LIST_DISPLAY? Why do you write heading manually? You can use IT_FIELDCAT parameter for defining a field catalog.

  • How to get ALV Display with First column alone in sort

    How to get ALV Display with First column alone in sort

    HI,
    You can build Internal Table and send this to the parameter "IT_SORT".
    eg:
    "the sorting Internal Table structure is as whown below.
    DATA:  t_sort_info type slis_t_sortinfo_alv.
    "Build the Sort Internal Table
      t_sort_info-fieldname = 'CARRID'.
      t_sort_info-subtot = 'X'.
      append t_sort_info.
      t_sort_info-fieldname = 'FLDATE'.
      t_sort_info-subtot = 'X'.
      append t_sort_info.
    Then pass this "IT_SORT_INFO" table to the Function module "Reuse_alv_*". (Note send the body of the Internal table only like "<b>IT_SORT = IT_SORT_INFO[]</b>".
    Here i am making ALV output sorted on CARRID & FLDATE.
    You can specify only the First Column name for sorting.
    Regards,
    Manju
    Message was edited by:
            MANJUNATHA KS

  • Display 2 rows per entry with ALV Grid

    Hi Experts,
    I need to display the results of a report with ALV Grid. The Problem is: I need to display the resultdata (some numbers etc..) in one row and then add a second row with the longtext.
    The ALV should look somthing like this:
    resultdata1 resultdata2 resultdata3
    longtext1
    resultdata1 resultdata2 resultdata3
    longtext1
    resultdata1 resultdata2 resultdata3
    longtext1
    Can anyone of you give me hint on how to do that?
    (The row_pos and col_pos ind the fieldcat do not do the trick )
    Thanx
    Felix

    hi ,
    You can do this
    resultdata1 resultdata2 resultdata3
    longtext1
    resultdata1 resultdata2 resultdata3
    longtext1
    resultdata1 resultdata2 resultdata3
    longtext1
    Create two internal table  .
    one for : resultdata1 resultdata2 resultdata3
    second for   longtext1
    see that both tables have matching primary key   .
    then can  match the data and  append in another third table   .
    regards
    Deepak.

  • Supress flaged items display in ALV with CL_GUI_ALV_GRID

    Hi There,
    I am using CL_GUI_ALV_GRID and displaying details in my custom program. Based on some criteria i'll set a flag for a row in PAI. I don't want to display those entries further. How to handle this in PBO? which events and methods should I use for this?
    Thanks in advance.
    Ram.

    Hello Rams
    When you display your ALV list then you can set the appropriate <b>filter conditions</b>. For example, your flag field is something like itab-flag = 'X'. Then you define a filter condition where flag ne 'X' meaning that all entries where flag is set will be filtered (not displayed).
    Regards
      Uwe

  • Data not getting displayed in ALV grid when run in background

    Hello experts!
    Could anyone help me out please?
    I need to display an ALV grid in the background. My requirements are as follows:
    I first display an ALV grid in the foreground based on some input parameters. The user selects a few records for updating it and clicks on the "update" button. On the click of this button another report must be called and here the ALV report is displayed in the background.I am using "reuse_alv_grid_display" to display the grid.
    I am using Import/Export to get the selected rows in my called report. When i execute this report in the foreground i get the ALV grid along with the data. But when i execute it in the background, i get only the grid with the fieldnames and not the data when i check in SP01.
    Thanks in advance!
    Smitha

    Hi Smitha,
    If you are able to see in SP01 and only see the output layout or "List contains no data" shows clealry that the data is not getting passed in the called program or the data is not being used correctly in the called program.
    Cheers
    VJ

  • Select row button not getting displayed in alv grid.

    Hi ,
    As per my requirement I am using tab strip in module pool.
    Each tab strip is containing one ALV.
    And user can change delete or create one record when the alv is displayed.
    The same should be saved in the database and ALV should be refreshed.
    When I am displaying the ALV the left most option of the ALV with which I can select the whole row is not coming.
    Because of which I am unable to call the method to get the selected row and delete or change accordingly.
    Why this button is not coming?
    I am using set_table_for_first_display in my program.
    Please help.

    Hi,
    In the method SET_TABLE_FOR_FIRST_DISPLAY, you will have to change the Selection Mode to 'A'. I guess you are not passing any values to the Layout parameters.
    Once you do that, you will find what your are looking for.
    Data : LA_LAYO type LVC_S_LAYO.
    LS_LAYO_SEL_MODE = 'A'.
    and pass this to the method's layout parameter.
    Cheers,
    SKC,

  • Need to be displayed in ALV grid

    Dear All,
    Below is my Program's code which is working accordingly. But in this code I am generating output as Basic list display.  But  I want my output to be displayed in ALV only. So from where I will start. Where to add code for Alv in my existing code. Can anybody help me out on the same.
    Regards,
    Abhay.
    REPORT  zfi_temp_rfkopr00
            MESSAGE-ID FR
           LINE-SIZE  132
           NO STANDARD PAGE HEADING.
    Report Name : Vendor Open Items Ageing Report
    Purpose : This report displays the Vendor Open Items based on
    different Ageing days (Calculated by taking the Base
    Line date and the days mentioned in Payment Terms)
    D A T A B A S E T A B L E S D E C L A R A T I O N
    TABLES: lfa1, " Vendor Master (General)
    t001, " Company Codes
    rfpdo.
    I N T E R N A L T A B L E S D E C L A R A T I O N S *
    Internal Table for Vendor Open Items Data
    DATA: BEGIN OF int_bsik OCCURS 0,
    lifnr LIKE bsik-lifnr, " Vendor Number
    name1 LIKE lfa1-name1, " Vendor Name
    shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
    belnr LIKE bsik-belnr, " Document Number
    xblnr LIKE bsik-xblnr, " Ref Doc No
    blart LIKE bsik-blart, " Document Type
    zfbdt LIKE bsik-zfbdt, " Base Line Date
    zbd1t LIKE bsik-zbd1t,                                      " Due date1
    zbd2t LIKE bsik-zbd2t,                                      " Due Date2
    zbd3t LIKE bsik-zbd3t,                                      " Due Date3
    waers LIKE bsik-waers, " Currency
    dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
    END OF int_bsik.
    Internal Table for Amounts Sum Up Data
    DATA: BEGIN OF int_final OCCURS 0,
    lifnr LIKE bsik-lifnr, " Vendor Number
    name1 LIKE lfa1-name1, " Vendor Name
    total1 LIKE bsik-dmbtr, " Amount in Local Curr
    total2 LIKE bsik-dmbtr, " Amount in Local Curr
    total3 LIKE bsik-dmbtr, " Amount in Local Curr
    total4 LIKE bsik-dmbtr, " Amount in Local Curr
    total5 LIKE bsik-dmbtr, " Amount in Local Curr
    total6 LIKE bsik-dmbtr, " Amount in Local Curr
    total LIKE bsik-dmbtr, " Amount in Local Curr
    END OF int_final.
    D A T A D E C L A R A T I O N S
    DATA : v_flag, " Flag
    v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
    v_gtotal LIKE bsik-dmbtr, " Amount Totals
    v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
    v_subtotal LIKE bsik-dmbtr, " Amount Totals
    v_date LIKE bsik-zfbdt, " Due Date
    v_tage1(4), " Age 30 days
    v_tage2(4), " Age 60 days
    v_tage3(4), " Age 90 days
    v_fir(15), " Column Text1
    v_sec(15), " Column Text2
    v_thir(15), " Column Text3
    v_four(17), " Column Text4
    v_fidd(4), " Days field1
    v_sedd(4), " Days field2
    v_thdd(4), " Days field3
    v_fodd(4), " Days field4
    v_str TYPE sy-lisel, " String
    v_str1(11), " String
    v_tage(3), " String
    v_date1(10). " Date field
    R A N G E D E C L A R A T I O N S
    RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
    r_date2 FOR bsik-zfbdt, " Date Range 2
    r_date3 FOR bsik-zfbdt, " Date Range 3
    r_date4 FOR bsik-zfbdt. " Date Range 4
    S E L E C T I O N S C R E E N *
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
    PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
    "Open items at key date
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
    p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
    p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
    p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
    SELECTION-SCREEN END OF BLOCK b3.
    A T S E L E C T I O N S C R E E N *
    AT SELECTION-SCREEN.
    Validate the screen fields
      PERFORM validate_flds.
    S T A R T O F S E L E C T I O N *
    START-OF-SELECTION.
    Fetch main data
      PERFORM fetch_data.
    T O P O F P A G E
    Header
    TOP-OF-PAGE.
      PERFORM header.
    E N D O F P A G E
    Footer
    END-OF-PAGE.
      ULINE.
    T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
    Top of Page in Secondary List
    TOP-OF-PAGE DURING LINE-SELECTION.
      PERFORM header1.
    A T L I N E S E L E C T I O N *
    AT LINE-SELECTION.
    Perform Line Selections
      PERFORM line_selection.
    E N D O F S E L E C T I O N
    END-OF-SELECTION.
    List generation
      PERFORM basic_list.
    *& Form validate_flds
    Validation of Selection Screen fields
    FORM validate_flds .
    Validate Vendor Code
      CLEAR lfa1-lifnr.
      SELECT lifnr UP TO 1 ROWS
      INTO lfa1-lifnr
      FROM lfa1
      WHERE lifnr IN s_lifnr AND
      spras = sy-langu.
      ENDSELECT.
      IF sy-subrc <> 0.
        MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
      ENDIF.
    Validate Company Code
      CLEAR t001-bukrs.
      SELECT bukrs UP TO 1 ROWS
      INTO t001-bukrs
      FROM t001
      WHERE bukrs = p_bukrs AND
      spras = sy-langu.
      ENDSELECT.
      IF sy-subrc <> 0.
        MESSAGE e021. " Invalid Company Code range
      ENDIF.
      IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
      ( p_tage1 > p_tage4 ).
        MESSAGE e999 WITH 'Column 1 greater'(004)
        'than Column# 2 or 3 or 4'(005).
      ENDIF.
    *column 2
      IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
        MESSAGE e999 WITH 'Column 2 greater'(006)
        'than Column# 3 or 4'(007).
      ENDIF.
    *column3
      IF ( p_tage3 > p_tage4 ).
        MESSAGE e999 WITH 'Column 3 greater'(008)
        'than Column#4'(009).
      ENDIF.
    ENDFORM. " validate_flds
    *& Form fetch_data
    Fetching Data from Database Tables
    FORM fetch_data .
    Date Range Population
      r_date1-sign = 'I'.
      r_date1-option = 'BT'.
      r_date1-low = p_allgst.
      r_date1-high = r_date1-low + p_tage1.
      APPEND r_date1.
      r_date2-sign = 'I'.
      r_date2-option = 'BT'.
      r_date2-low = r_date1-high + 1.
      r_date2-high = r_date1-low + p_tage2.
      APPEND r_date2.
      r_date3-sign = 'I'.
      r_date3-option = 'BT'.
      r_date3-low = r_date2-high + 1.
      r_date3-high = r_date1-low + p_tage3.
      APPEND r_date3.
      r_date4-sign = 'I'.
      r_date4-option = 'BT'.
      r_date4-low = r_date3-high + 1.
      r_date4-high = r_date1-low + p_tage4.
      APPEND r_date4.
    Select the Vendor Open Items data from BSIK
      SELECT l~lifnr
      l1~name1
      b~waers
      b~dmbtr
      b~zfbdt
      b~zbd1t
      b~zbd2t
      b~zbd3t
      b~belnr
      b~xblnr
      b~shkzg
      b~blart
      INTO CORRESPONDING FIELDS OF TABLE int_bsik
      FROM lfb1 AS l INNER JOIN lfa1 AS l1
      ON llifnr = l1lifnr
      INNER JOIN bsik AS b
      ON llifnr = blifnr AND
      lbukrs = bbukrs
      WHERE l~lifnr IN s_lifnr AND
      l~bukrs = p_bukrs AND
      b~zfbdt LE p_allgst.
      IF sy-subrc <> 0.
        MESSAGE i000 WITH 'No Data found'(027).
      ENDIF.
    Removing the date limit to get the due items in the past
      DELETE int_bsik WHERE
      ( blart NE 'RE' AND blart NE 'KR' ) OR
      shkzg NE 'H'.
      SORT int_bsik BY lifnr.
    ENDFORM. " fetch_data
    *& Form header
    Display the Report Columns
    FORM header .
      v_tage1 = p_tage1 + 1.
      v_tage2 = p_tage2 + 1.
      v_tage3 = p_tage3 + 1.
      v_fidd = p_tage1.
      v_sedd = p_tage2.
      v_thdd = p_tage3.
      v_fodd = p_tage4.
      MOVE v_fodd0(4) TO v_fodd1(3).
      v_fodd+0(1) = space.
      CONCATENATE '1 to'(010) v_fidd INTO v_fir.
      CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
      CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
      CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
    Standard header
      CLEAR: v_date1, v_str, v_str1, v_tage.
      WRITE p_allgst TO v_date1.
      MOVE p_tage4 TO v_tage.
      CONCATENATE '>' v_tage text-025 INTO v_str1.
      CONCATENATE
      'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
      v_date1 INTO v_str SEPARATED BY space.
    CALL FUNCTION 'Z_STANDARD_HEADER'
       EXPORTING
         title1 = 'Saudi International Petrochemical Company'(012)
         title2 = v_str.
      FORMAT COLOR OFF.
      WRITE : /1(168) sy-uline.
      FORMAT COLOR 1 INTENSIFIED.
      WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
      50(101) 'Invoices Due For(In Days)'(014) CENTERED,
      151 sy-vline, 168 sy-vline .
      WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
      13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
      49 sy-vline,
      50(101) sy-uline,151 sy-vline,
      152(16) 'Total'(017) CENTERED,
      168 sy-vline.
      WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
      50(16) v_fir CENTERED, 66 sy-vline,
      67(16) v_sec CENTERED, 83 sy-vline,
      84(16) v_thir CENTERED, 100 sy-vline,
      101(16) v_four CENTERED, 117 sy-vline,
      118(16) v_str1 CENTERED, 134 sy-vline,
      135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
      168 sy-vline.
      FORMAT COLOR OFF.
      WRITE : /1(168) sy-uline.
    ENDFORM. " header
    *& Form basic_list
    Display the Basic List
    FORM basic_list .
      NEW-PAGE LINE-SIZE 168.
      LOOP AT int_bsik.
        CLEAR v_date.
        IF int_bsik-zbd3t <> ' '.
          v_date = int_bsik-zfbdt + int_bsik-zbd3t.
        ELSE.
          IF int_bsik-zbd2t <> ' '.
            v_date = int_bsik-zfbdt + int_bsik-zbd2t.
          ELSE.
            v_date = int_bsik-zfbdt + int_bsik-zbd1t.
          ENDIF.
        ENDIF.
        IF int_bsik-zbd1t = ' '.
          v_date = int_bsik-zfbdt.
        ENDIF.
        IF v_date IN r_date1.
          int_final-total1 = int_final-total1 + int_bsik-dmbtr.
        ELSEIF v_date IN r_date2.
          int_final-total2 = int_final-total2 + int_bsik-dmbtr.
        ELSEIF v_date IN r_date3.
          int_final-total3 = int_final-total3 + int_bsik-dmbtr.
        ELSEIF v_date IN r_date4.
          int_final-total4 = int_final-total4 + int_bsik-dmbtr.
        ELSEIF v_date > r_date4-high.
          int_final-total5 = int_final-total5 + int_bsik-dmbtr.
        ELSEIF v_date < p_allgst.
          int_final-total6 = int_final-total6 + int_bsik-dmbtr.
        ENDIF.
        AT END OF lifnr.
          v_flag = 1.
        ENDAT.
        IF v_flag = 1.
          int_final-lifnr = int_bsik-lifnr.
          int_final-name1 = int_bsik-name1.
          int_final-total = int_final-total1 + int_final-total2 +
          int_final-total3 + int_final-total4 + int_final-total5 +
          int_final-total6.
          APPEND int_final.
          v_gtotal1 = v_gtotal1 + int_final-total1.
          v_gtotal2 = v_gtotal2 + int_final-total2.
          v_gtotal3 = v_gtotal3 + int_final-total3.
          v_gtotal4 = v_gtotal4 + int_final-total4.
          v_gtotal5 = v_gtotal5 + int_final-total5.
          v_gtotal6 = v_gtotal6 + int_final-total6.
          v_gtotal = v_gtotal + int_final-total.
          WRITE: /1 sy-vline,
          2 int_final-lifnr COLOR 4 INTENSIFIED ON,
          13 sy-vline,
          14 int_final-name1 COLOR 4 INTENSIFIED ON,
          49 sy-vline.
          DATA : v_rem.
          v_rem = sy-tabix MOD 2.
          IF v_rem NE 0.
            FORMAT COLOR 2 INTENSIFIED.
            WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
            66 sy-vline,
            67 int_final-total2 CURRENCY int_bsik-waers,
            83 sy-vline,
            84 int_final-total3 CURRENCY int_bsik-waers,
            100 sy-vline,
            101 int_final-total4 CURRENCY int_bsik-waers,
            117 sy-vline,
            118 int_final-total5 CURRENCY int_bsik-waers,
            134 sy-vline,
            135 int_final-total6 CURRENCY int_bsik-waers,
            151 sy-vline,
            152 int_final-total CURRENCY int_bsik-waers,
            168 sy-vline.
          ELSE.
            WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
            66 sy-vline,
            67 int_final-total2 CURRENCY int_bsik-waers,
            83 sy-vline,
            84 int_final-total3 CURRENCY int_bsik-waers,
            100 sy-vline,
            101 int_final-total4 CURRENCY int_bsik-waers,
            117 sy-vline,
            118 int_final-total5 CURRENCY int_bsik-waers,
            134 sy-vline,
            135 int_final-total6 CURRENCY int_bsik-waers,
            151 sy-vline,
            152 int_final-total CURRENCY int_bsik-waers,
            168 sy-vline.
          ENDIF.
          FORMAT COLOR OFF.
          HIDE int_final.
          CLEAR int_final.
          v_flag = 0.
        ENDIF.
        AT LAST.
          WRITE : /1(168) sy-uline.
          FORMAT COLOR 3 INTENSIFIED.
          WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
          49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
          66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
          83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
          100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
          117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
          134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
          151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
          168 sy-vline.
          HIDE : v_gtotal1,
          v_gtotal2,
          v_gtotal3,
          v_gtotal4,
          v_gtotal5,
          v_gtotal6,
          v_gtotal.
        ENDAT.
        FORMAT COLOR OFF.
      ENDLOOP.
      WRITE : /1(168) sy-uline.
    ENDFORM. " basic_list
    *& Form line_selection
    When double clicked on the line display the seconday list
    FORM line_selection .
      NEW-PAGE LINE-SIZE 206.
    Sy-lsind = 1.
      DATA : v_rem,v_cnt LIKE sy-tabix.
      v_cnt = 0.
      SORT int_bsik BY belnr zfbdt.
      LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
        v_rem = v_cnt MOD 2.
        CLEAR v_date.
        IF int_bsik-zbd3t <> ' '.
          v_date = int_bsik-zfbdt + int_bsik-zbd3t.
        ELSE.
          IF int_bsik-zbd2t <> ' '.
            v_date = int_bsik-zfbdt + int_bsik-zbd2t.
          ELSE.
            v_date = int_bsik-zfbdt + int_bsik-zbd1t.
          ENDIF.
        ENDIF.
        IF int_bsik-zbd1t = ' '.
          v_date = int_bsik-zfbdt.
        ENDIF.
        IF v_rem NE 0.
          FORMAT COLOR 2 INTENSIFIED.
          WRITE :/1 sy-vline, 2 int_bsik-belnr,
          12 sy-vline,13 int_bsik-lifnr,
          23 sy-vline,24 int_bsik-name1,
          59 sy-vline,60 int_bsik-xblnr,
          76 sy-vline,77 int_bsik-zfbdt,
          87 sy-vline.
          WRITE : 104 sy-vline,121 sy-vline,
          138 sy-vline,155 sy-vline,
          172 sy-vline, 189 sy-vline,
          190 int_bsik-dmbtr CURRENCY int_bsik-waers,
          206 sy-vline.
          IF v_date IN r_date1.
            v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
            WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date IN r_date2.
            v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
            WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date IN r_date3.
            v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
            WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date IN r_date4.
            v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
            WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date > r_date4-high.
            v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
            WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date < p_allgst.
            v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
            WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ENDIF.
          FORMAT COLOR OFF.
        ELSE.
          WRITE :/1 sy-vline, 2 int_bsik-belnr,
          12 sy-vline,13 int_bsik-lifnr,
          23 sy-vline,24 int_bsik-name1,
          59 sy-vline,60 int_bsik-xblnr,
          76 sy-vline,77 int_bsik-zfbdt,
          87 sy-vline.
          WRITE : 104 sy-vline,121 sy-vline,
          138 sy-vline,155 sy-vline,
          172 sy-vline,189 sy-vline,
          190 int_bsik-dmbtr CURRENCY int_bsik-waers,
          206 sy-vline.
          IF v_date IN r_date1.
            v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
            WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date IN r_date2.
            v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
            WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date IN r_date3.
            v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
            WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date IN r_date4.
            v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
            WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date > r_date4-high.
            v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
            WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ELSEIF v_date < p_allgst.
            v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
            WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
          ENDIF.
        ENDIF.
        FORMAT COLOR OFF.
        v_cnt = v_cnt + 1.
      ENDLOOP.
      WRITE : /1(206) sy-uline.
      v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
      + v_subtotal4 + v_subtotal5 + v_subtotal6.
      FORMAT COLOR 3 INTENSIFIED.
      WRITE : /1 sy-vline,
      2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
      87 sy-vline,
      88 v_subtotal1 CURRENCY int_bsik-waers,
      104 sy-vline,
      105 v_subtotal2 CURRENCY int_bsik-waers,
      121 sy-vline,
      122 v_subtotal3 CURRENCY int_bsik-waers,
      138 sy-vline,
      139 v_subtotal4 CURRENCY int_bsik-waers,
      155 sy-vline,
      156 v_subtotal5 CURRENCY int_bsik-waers,
      172 sy-vline,
      173 v_subtotal6 CURRENCY int_bsik-waers,
      189 sy-vline,
      190 v_subtotal CURRENCY int_bsik-waers,
      206 sy-vline.
      FORMAT COLOR OFF.
      WRITE : /1(206) sy-uline.
      CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
      v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
      v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
    ENDFORM. " line_selection
    *& Form header1
    Secondary List Header
    FORM header1 .
    Standard header
      CLEAR: v_date1, v_str, v_str1, v_tage.
      WRITE p_allgst TO v_date1.
      MOVE p_tage4 TO v_tage.
      CONCATENATE '>' v_tage text-025 INTO v_str1.
      CONCATENATE
      'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
      v_date1 INTO v_str SEPARATED BY space.
    CALL FUNCTION 'Z_STANDARD_HEADER'
       EXPORTING
         title1 = 'Saudi International Petrochemical Company'(012)
         title2 = v_str.
      FORMAT COLOR 1 INTENSIFIED.
      WRITE :/1(206) sy-uline.
      WRITE :/1 sy-vline,12 sy-vline ,
      23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
      88(101) 'Invoices Due For(In Days)'(014) CENTERED,
      189 sy-vline,206 sy-vline.
      WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
      12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
      23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
      59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
      76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
      87 sy-vline, 88(101) sy-uline,
      189 sy-vline,190(16) 'Total'(017) CENTERED,
      206 sy-vline.
      WRITE : /1 sy-vline, 12 sy-vline,
      23 sy-vline,59 sy-vline,
      76 sy-vline,87 sy-vline,
      88(16) v_fir CENTERED, 104 sy-vline,
      105(16) v_sec CENTERED, 121 sy-vline,
      122(16) v_thir CENTERED, 138 sy-vline,
      139(16) v_four CENTERED, 155 sy-vline,
      156(16) v_str1 CENTERED,
      172 sy-vline,
      173(16) 'Already Overdue'(018) CENTERED,
      189 sy-vline,
      206 sy-vline.
      FORMAT COLOR OFF.
      WRITE : /1(206) sy-uline.
    ENDFORM.                                                    " header1

    Hi Abhay,
    After moving the whole data into final internal table, pass that internal table to function module REUSE_ALV_GRID_DISPLAY.
    before that you need to build field catalog and have to build layout with all the required columns.
    Go through the below links for your reference.
    Simple ALV report
    http://www.sapgenie.com/abap/controls/alvgrid.htm
    http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV? http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV? http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV? http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    Check this for basic concepts of OOPS
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
    Tabstrip
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
    Editable ALV
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
    Tree
    http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
    General Tutorial for OOPS
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
    http://www.sapdevelopment.co.uk/reporting/alvhome.htm
    http://www.sap-img.com/abap/what-is-alv-programming.htm
    http://www.sap-img.com/abap-function.htm
    http://www.geocities.com/mpioud/Abap_programs.html
    http://www.sapdevelopment.co.uk/reporting/alv/alvtree%5Calvtree_basic.htm
    http://esnips.com/doc/ad20dca9-6182-4903-8d8f-96a66dc8590c/ALV.pdf
    http://www.sap-img.com/abap-function.htm
    Go thru these programs they may help u to try on some hands on
    ALV Demo program
    BCALV_DEMO_HTML
    BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
    BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
    BCALV_GRID_DEMO Simple ALV Control Call Demo Program
    BCALV_TREE_DEMO Demo for ALV tree control
    BCALV_TREE_SIMPLE_DEMO
    BC_ALV_DEMO_HTML_D0100
    The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
    This helps us to implement all the features mentioned very effectively.
    Using ALV, We can have three types of reports:
    1. Simple Report
    2. Block Report
    3. Hierarchical Sequential Report
    There are some function modules which will enable to produce the above reports without much effort.
    All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
    1. SIMPLE REPORT.
    The important function modules are
    a. Reuse_alv_list_display
    b. Reuse_alv_fieldcatalog_merge
    c. Reuse_alv_events_get
    d. Reuse_alv_commentary_write
    e. Reuse_alv_grid_display
    A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
    The important parameters are :
    I. Export :
    i. I_callback_program : report id
    ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
    iii. I_callback_user_command : routine where the function codes are handled
    iv. I_structure name : name of the dictionary table
    v. Is_layout : structure to set the layout of the report
    vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
    vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
    II. Tables :
    i. t_outtab : internal table with the data to be output
    B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
    The Important Parameters are :
    I. Export :
    i. I_program_name : report id
    ii. I_internal_tabname : the internal output table
    iii. I_inclname : include or the report name where all the dynamic forms are handled.
    II Changing
    ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
    declared in the type pool SLIS.
    C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
    Parameters :
    I. Import :
    Et_Events : The event table is returned with all possible CALLBACK events
    for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
    II. Export :
    I_List_type :
    0 = simple list REUSE_ALV_LIST_DISPLAY
    1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
    2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
    3 = hierarchical-sequential block list
    REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
    Parameters :
    I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
    This internal table has three fields :
    Typ : ‘H’ – header, ‘S’ – selection , ‘A’ - action
    Key : only when typ is ‘S’.
    Info : the text to be printed
    E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
    Parameters : same as reuse_alv_list_display
    This is an example for simple list.
    2. BLOCK REPORT
    This is used to have multiple lists continuously.
    The important functions used in this report are:
    A. REUSE_ALV_BLOCK_LIST_INIT
    B. REUSE_ALV_BLOCK_LIST_APPEND
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    A. REUSE_ALV_BLOCK_LIST_INIT
    Parameters:
    I. I_CALLBACK_PROGRAM
    II. I_CALLBACK_PF_STATUS_SET
    III. I_CALLBACK_USER_COMMAND
    This function module is used to set the default gui status etc.
    B. REUSE_ALV_BLOCK_LIST_APPEND
    Parameters :
    Export :
    I. is_layout : layout settings for block
    II. it_fieldcat : field catalog
    III. i_tabname : internal table name with output data
    IV. it_events : internal table with all possible events
    Tables :
    i. t_outtab : internal table with output data.
    This function module adds the data to the block.
    Repeat this function for all the different blocks to be displayed one after the other.
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    This function module is used for hierarchical sequential blocks.
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    Parameters : All the parameters are optional.
    This function module display the list with data appended by the above function.
    Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
    3. Hierarchical reports :
    Hierarchical sequential list output.
    The function module is
    A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
    Parameters:
    I. Export:
    i. I_CALLBACK_PROGRAM
    ii. I_CALLBACK_PF_STATUS_SET
    iii. I_CALLBACK_USER_COMMAND
    iv. IS_LAYOUT
    v. IT_FIELDCAT
    vi. IT_EVENTS
    vii. i_tabname_header : Name of the internal table in the program containing the
    output data of the highest hierarchy level.
    viii. i_tabname_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    ix. is_keyinfo : This structure contains the header and item table field
    names which link the two tables (shared key).
    II. Tables
    i. t_outtab_header : Header table with data to be output
    ii. t_outtab_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using ‘REUSE_ALV_FIELDCATALOG_MERGE’.
    Important Attributes :
    A. col_pos : position of the column
    B. fieldname : internal fieldname
    C. tabname : internal table name
    D. ref_fieldname : fieldname (dictionary)
    E. ref_tabname : table (dictionary)
    F. key(1) : column with key-color
    G. icon(1) : icon
    H. symbol(1) : symbol
    I. checkbox(1) : checkbox
    J. just(1) : (R)ight (L)eft (C)ent.
    K. do_sum(1) : sum up
    L. no_out(1) : (O)blig.(X)no out
    M. outputlen : output length
    N. seltext_l : long key word
    O. seltext_m : middle key word
    P. seltext_s : short key word
    Q. reptext_ddic : heading (ddic)
    R. ddictxt(1) : (S)hort (M)iddle (L)ong
    S. datatype : datatype
    T. hotspot(1) : hotspot
    <b>Reward points for helpful answers,</b>
    Satish

  • Printing logo with ALV report output?

    Hi all,
    I have written a sinple program to display a report output in ALV grid format and inserted a logo in it usingh standrad FM. Though the logo is inserted successfully displaying with list ,  but  when i am clicking on print preview the logo is missing.
    Please help me on how to print the logo with the list?
    Thanks,
    Vamshi.

    Hi Krishna,
    -->Firstly go to T-Code OAER.
    -->Give Class Name as PICTURES
    -->Give Class Type as OT
    -->Give Object Key as(watever the name you wish to give)
    -->Example key 1000
    -->Click on Execute.
    Here you will get Standard Document Types.
    Select which ever you want i.e., Attachment,Screen,Template ,etc.
    Double click on Attchment it will ask you the File on the Desktop.
    Upload the image.
    Now you can see the Image in the Folder PICTURES.
    Now go to the Report.
    Function Module 'REUSE_ALV_COMMENTARY_WRITE'.
                             i_logo = '1000'.
    Hope this will Help you.
    With Regards,
    Sharmishta.

  • Display in ALV

    how to display contents of internal table to ALV
    whats d FM used for that?

    Hi Kumar,
    To get an internal table to be displayed in an ALV Grid control:
    There are 2 different methods used for this. Mainly for doing this u have to first create a fieldcatalog and then call the function RE_USE_ALV_GRID_DISPLAY. Creating internal table and getting the desired data to be displayed into the grid is very simple. Follow the code shown below.
    types-pools: slis.
    tables kna1.
    types: begin of tp_data,
            ktokd like kna1-ktokd,
            kunnr like kna1-kunnr,
            name1 like kna1-name1,
            name2 like kna1-name2,
            ort01 like kna1-ort01,
           end of tp_data,
           tp_tbl_data type standard table of tp_data. "data type defination
    Report data to be shown.
    data: it_data type standard table of tp_data.
    ALV required data objects.
    data: t_fieldcat type slis_t_fieldcat_alv,
          t_event type slis_t_event.
    refresh: t_fieldcat, t_event.
    *code to get user input
    Selection-screen begin of block Enter_data with frame title text-001.
    PARAMETERS p_ktokd like KNA1-ktokd OBLIGATORY.
    SELECT-OPTIONS s_kunnr FOR KNA1-kunnr.
    Selection-screen end of block Enter_data.
    START-OF-SELECTION.
    *get data into the internal table it_data
    PERFORM get_data USING it_data.
    *prepare the field catalog
    PERFORM prepare_fieldcat using:
    1 'KTOKD' 'KNA1' t_fieldcat,
    2 'KUNNR' 'KNA1' t_fieldcat,
    3 'NAME1' 'KNA1' t_fieldcat,
    4 'NAME2' 'KNA1' t_fieldcat,
    5 'ORT01' 'KNA1' t_fieldcat.
    Displays the ALV grid
    PERFORM display_alv USING t_fieldcat it_data.
    *deleting the internal table it_data from memory
    free it_data.
    *definations of sub-routines called in the program
    *function to get the data from the database table KNA1 to internal table it_data
    form get_data USING t_data type tp_tbl_data.
    SELECT ktokd kunnr name1 name2 ort01
            INTO CORRESPONDING FIELDS OF TABLE t_data
            FROM kna1
            WHERE ktokd = p_ktokd
            and kunnr in s_kunnr.
    ENDFORM.
    *function to set the field catalog
    FORM prepare_fieldcat USING t_colpos t_fieldname t_ref_tabname t_fieldcat type slis_t_fieldcat_alv.
    data tmp_fcat type slis_fieldcat_alv.
    clear tmp_fcat.
    tmp_fcat-col_pos = t_colpos.
    tmp_fcat-ref_fieldname = tmp_fcat-fieldname = t_fieldname.
    tmp_fcat-ref_tabname = t_ref_tabname.
    append tmp_fcat to t_fieldcat.
    ENDFORM.
    *function to display the alvgrid on the screen
    form display_alv using t_fc type slis_t_fieldcat_alv
                           it_d type tp_tbl_data.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          it_fieldcat              = t_fc
        tables
          t_outtab                 = it_d[]
        exceptions
          program_error            = 1
          others                   = 2.
    ENDFORM.

  • Display a ALV report in EP

    Hi,
    What is the best way to display an ALV report in the Portal?
    I would like the report to be displayed in the GUI of the Portal (meaning, I would like to work with WebDynpro or PDK or any other way such that the GUI will be identical to all the other Portal objects).
    Thanks in advance,
    Aviad

    Hi,
    You can actually, as suggested by others, code the PDV_ALV found in the PDK yourself.
    All you need is to understand the workflow of the BAPI called "PORTAL_ALV_QUERY_CALL".
    This BAPI is configured to get the properties of a query and another BAPI (derived from Z_QUERY_SELECTIONS) which plants additional data in the original query.
    For example - If you wish to activate a query called myQuery1 in the user group FI-AP with a variant called TEST between a date range selected by the portal user. The parameters passed to the BAPI are as follows -
    "QUERY_NAME=myQuery1"
    "QUERY_USERGROUP=FI-AP"
    "QUERY_VARIANT=TEST"
    "QUERY_CREATE_SELTAB_FM=Z_QUERY_SELECTIONS_1"
    "FROM_DATE="
    "TO_DATE="
    What will happen in the background is that the query myQuery1 from the usergroup FI-AP will be activated using the variant TEST and using the QUERY_CREATE_SELTAB_FM value the date fileds will be assigned to their corresponding fields in the query. After the activation the BAPI will return a table with the result.
    Hope it helps,
    Aviad

  • What is the  difference between list display and grid display in alv report

    Hai genious
    i am a new of the abap, i dont know the alv report, i have a small doubt, can u please tell me  what is the main difference between list display and grid display in alv report
    thanks&regards
    chinnu

    Hi ,
    1. For all practical purposes, they are the same.
    2. Some differences:
    a) from abap coding point of view,
    alv list is done with Function modules,
    alv gris can also be done with FM,
    but can also be done using OO concepts.
    b) Alv grid (using oo concept) requires
    designing the screen layout .
    Hence, in one screen, we can show more
    then one alv grid
    (we cannot show more than
    one alv list on one screen)
    c) ALV grid uses ActiveX controls
    present on the Presentation Server.
    Hence, it consumes More Memory
    on the presentation server.
    d) ALV LIST is Display Only.
    Whereas
    ALV Grid Can Be made EDITABLE for entry purpose.
    e) In alv grid, these options are possible,
    but not in alv list.
    without horizontal lines
    without vertical lines
    without cell merging during sorts
    display total lines above the entries
    I hope it helps.
    Regards,
    Mamta
    Edited by: Mamta Verma on Nov 27, 2008 6:41 AM

  • Page break and Subtotal display in alv

    Kindly provide me the resolution for the following issue at your earliest
    Issue:
    I am sorting the alv list based on invoice payment date with subtotals.
    and i need a page break for every new invoice payment date.I have achived
    the same by following code but now subtotals are displaying in the new page
    first line rather i need subtotals at end of each page.
    Thanking you.
    Regards
    Ravishekar.Thallapally
    Mobil:09866887298.
    *&      Form  sub_Build_sort_catalogue
          Building Sort Catalog
    <--  L_T_SORT  : Internal table for sort catalog
    FORM sub_build_sort_catalogue CHANGING l_t_sort TYPE slis_t_sortinfo_alv.
       DATA: l_v_sortcat TYPE  slis_sortinfo_alv.
       CLEAR l_v_sortcat.
    Sort the fields with Planned Incoming Payment in alv
       l_v_sortcat-spos      =  '1'.
       l_v_sortcat-fieldname =  'FAEDT'.
       l_v_sortcat-subtot    =  'X'.
       l_v_sortcat-up        =  'X'.
       APPEND l_v_sortcat TO l_t_sort.
       CLEAR  l_v_sortcat.
    Sort the fields with Planned Incoming Payment in alv
       l_v_sortcat-spos      =  '002'.
       l_v_sortcat-fieldname =  'INV_REF'.
       l_v_sortcat-subtot    =  'X'.
       l_v_sortcat-up        =  'X'.
       APPEND l_v_sortcat TO l_t_sort.
       CLEAR  l_v_sortcat.
    ENDFORM.                    " sub_Build_sort_catalogue
    *&      Form  sub_after_line_output
         Appending another event 'AFTER_LINE_OUTPUT' to g_t_events
         -->L_T_OUTPUT  : Internal table with output data
         <--L_T_EVENTS  : Internal table with events
    FORM sub_after_line_output  USING    l_t_output TYPE ty_t_output
                                 CHANGING l_t_events TYPE slis_t_event.
       DATA: l_v_event TYPE slis_alv_event.
       l_v_event-name =  'AFTER_LINE_OUTPUT'.
       l_v_event-form =  'SUB_AFTER_LINE_OUTPUT1'.
       APPEND l_v_event TO l_t_events.
    ENDFORM.    
    *&      Form  after_line_output
          After line output event is handled via this form
          L_V_LINE : Capturing line value for page break.
    FORM SUB_after_line_output1 USING l_v_line TYPE slis_lineinfo.  "#EC CALLED
       DATA: l_index1 LIKE sy-tabix,
             l_index2 LIKE sy-tabix.
       FIELD-SYMBOLS: <l_fs_output1> TYPE ty_output,
                      <l_fs_output2> TYPE ty_output.
       CLEAR l_index1.
       l_index1 = l_v_line-tabindex.
       READ TABLE g_t_output INDEX l_index1 ASSIGNING <l_fs_output1>.
       IF sy-subrc = 0.
         CLEAR l_index2.
         l_index2 = l_index1 + 1.
         READ TABLE g_t_output INDEX l_index2 ASSIGNING <l_fs_output2>.
         IF sy-subrc = 0.
           IF <l_fs_output1>-FAEDT <> <l_fs_output2>-FAEDT   .
            WRITE: sy-uline.
             NEW-PAGE.
           ENDIF.
         ENDIF.
       ENDIF.
    ENDFORM.                    " after_line_output
    *&      Form  Sub_display_alv_list
          Displaying the ALV list
         -->L_T_FIELDCATALOG : Itab with Field  Catalog
         -->L_T_LAYOUT       : Itab with Layout Records
         -->L_T_OUTPUT       : Itab with Output Data
         -->L_T_EVENT        : Itab with Event  Catalalog
    FORM sub_display_alv_list  USING     l_t_fieldcatalog TYPE slis_t_fieldcat_alv
                                          l_t_layout       TYPE slis_layout_alv
                                          l_t_sort         TYPE slis_t_sortinfo_alv
                                 CHANGING l_t_event        TYPE slis_t_event
                                          l_t_output       TYPE ty_t_output .
    *Set Report Title.
       g_v_title = 'AR Clearing Doc. Details'.
    *Perform for after line output
       PERFORM sub_after_line_output USING l_t_output
                                  CHANGING l_t_event .
    *CALL TO FM REUSE ALV LIST DISPLAY
       CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
           i_callback_program             = sy-repid
      I_CALLBACK_PF_STATUS_SET       = ' '
      I_CALLBACK_USER_COMMAND        = ' '
      I_STRUCTURE_NAME               =
           is_layout                      = l_t_layout
           it_fieldcat                    = l_t_fieldcatalog
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
           it_sort                        = l_t_sort
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
      I_SAVE                         = ' '
      IS_VARIANT                     =
        it_events                      = l_t_event[]
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
         TABLES
           t_outtab                       = l_t_output[]
    EXCEPTIONS
      PROGRAM_ERROR                  = 1
      OTHERS                         = 2
       IF sy-subrc <> 0.
       ENDIF.
    ENDFORM.                    " Sub_display_alv_list

    Dear Friends,
    I have got the solution from my technical lead for the below issue, I like to share this resolution with you all.
    Best Regards,
    Ravishekar.Thallapally
    *&      Form  after_line_output
          After line output event is handled via this form
          L_V_LINE : Capturing line value for page break.
    FORM sub_after_line_output1 USING l_v_line TYPE slis_lineinfo."#EC CALLED
       DATA: l_v_int  TYPE int1.
       IF l_v_line-sumindex IS NOT INITIAL .
         l_v_int = l_v_line-sumindex MOD 2 .
         IF l_v_line-subtot = 'X' AND l_v_int = 0.
         Write:/ sy-uline.
            NEW-PAGE.
           CLEAR:l_v_int.
         ENDIF.
       ENDIF.
    ENDFORM.                    " after_line_output

  • Need to display two ALV GRIDs in a single screen

    Hi,
    I have a question, i'm using version 4.6. I want to display 2 ALVs in a single screen or by calling.
    Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2) 
    Step 2 : Display In a single report
    ALV1 report (Editable ,Has to be a GRID)
    ALV2 report (Non Editable, Has to be a GRID)
                             (or)
    Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
    Step 2 :
    ALV1 report (Editable ,Has to be a GRID, with a custom button to call ALV2 hiding the ALV1 ie not visible to user)
    ALV2 report (Non Editable ,Has to be a GRID, with a custom button to call ALV1 hiding the ALV2 ie not visible to user)
    Please help me <b><REMOVED BY MODERATOR></b>
    Message was edited by:
            Alvaro Tejada Galindo

    Hi
    ABAP List Viewer
    Simple ALV report
    http://www.sapgenie.com/abap/controls/alvgrid.htm
    http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    Check the program in the following link:
    http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    13. Top-of-page in ALV
    selection-screen and top-of-page in ALV
    14.  ALV Group Heading
    http://www.sap-img.com/fu037.htm
    How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    15. ALV output to PDF conversion
    It has an example code for PDF Conversion.
    http://www.erpgenie.com/abap/code/abap51.htm
    converting the output of alv in pdf
    Go thru these programs they may help u to try on some hands on
    ALV Demo program
    BCALV_DEMO_HTML
    BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
    BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
    BCALV_GRID_DEMO Simple ALV Control Call Demo Program
    BCALV_TREE_DEMO Demo for ALV tree control
    BCALV_TREE_SIMPLE_DEMO
    BC_ALV_DEMO_HTML_D0100
    The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
    This helps us to implement all the features mentioned very effectively.
    Using ALV, We can have three types of reports:
    1. Simple Report
    2. Block Report
    3. Hierarchical Sequential Report
    There are some function modules which will enable to produce the above reports without much effort.
    All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
    1. SIMPLE REPORT.
    The important function modules are
    a. Reuse_alv_list_display
    b. Reuse_alv_fieldcatalog_merge
    c. Reuse_alv_events_get
    d. Reuse_alv_commentary_write
    e. Reuse_alv_grid_display
    A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
    The important parameters are :
    I. Export :
    i. I_callback_program : report id
    ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
    iii. I_callback_user_command : routine where the function codes are handled
    iv. I_structure name : name of the dictionary table
    v. Is_layout : structure to set the layout of the report
    vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
    vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
    II. Tables :
    i. t_outtab : internal table with the data to be output
    B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
    The Important Parameters are :
    I. Export :
    i. I_program_name : report id
    ii. I_internal_tabname : the internal output table
    iii. I_inclname : include or the report name where all the dynamic forms are handled.
    II Changing
    ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
    declared in the type pool SLIS.
    C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
    Parameters :
    I. Import :
    Et_Events : The event table is returned with all possible CALLBACK events
    for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
    II. Export :
    I_List_type :
    0 = simple list REUSE_ALV_LIST_DISPLAY
    1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
    2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
    3 = hierarchical-sequential block list
    REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
    Parameters :
    I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
    This internal table has three fields :
    Typ : ‘H’ – header, ‘S’ – selection , ‘A’ - action
    Key : only when typ is ‘S’.
    Info : the text to be printed
    E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
    Parameters : same as reuse_alv_list_display
    This is an example for simple list.
    2. BLOCK REPORT
    This is used to have multiple lists continuously.
    The important functions used in this report are:
    A. REUSE_ALV_BLOCK_LIST_INIT
    B. REUSE_ALV_BLOCK_LIST_APPEND
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    A. REUSE_ALV_BLOCK_LIST_INIT
    Parameters:
    I. I_CALLBACK_PROGRAM
    II. I_CALLBACK_PF_STATUS_SET
    III. I_CALLBACK_USER_COMMAND
    This function module is used to set the default gui status etc.
    B. REUSE_ALV_BLOCK_LIST_APPEND
    Parameters :
    Export :
    I. is_layout : layout settings for block
    II. it_fieldcat : field catalog
    III. i_tabname : internal table name with output data
    IV. it_events : internal table with all possible events
    Tables :
    i. t_outtab : internal table with output data.
    This function module adds the data to the block.
    Repeat this function for all the different blocks to be displayed one after the other.
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    This function module is used for hierarchical sequential blocks.
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    Parameters : All the parameters are optional.
    This function module display the list with data appended by the above function.
    Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
    3. Hierarchical reports :
    Hierarchical sequential list output.
    The function module is
    A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
    Parameters:
    I. Export:
    i. I_CALLBACK_PROGRAM
    ii. I_CALLBACK_PF_STATUS_SET
    iii. I_CALLBACK_USER_COMMAND
    iv. IS_LAYOUT
    v. IT_FIELDCAT
    vi. IT_EVENTS
    vii. i_tabname_header : Name of the internal table in the program containing the
    output data of the highest hierarchy level.
    viii. i_tabname_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    ix. is_keyinfo : This structure contains the header and item table field
    names which link the two tables (shared key).
    II. Tables
    i. t_outtab_header : Header table with data to be output
    ii. t_outtab_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using ‘REUSE_ALV_FIELDCATALOG_MERGE’.
    Important Attributes :
    A. col_pos : position of the column
    B. fieldname : internal fieldname
    C. tabname : internal table name
    D. ref_fieldname : fieldname (dictionary)
    E. ref_tabname : table (dictionary)
    F. key(1) : column with key-color
    G. icon(1) : icon
    H. symbol(1) : symbol
    I. checkbox(1) : checkbox
    J. just(1) : (R)ight (L)eft (C)ent.
    K. do_sum(1) : sum up
    L. no_out(1) : (O)blig.(X)no out
    M. outputlen : output length
    N. seltext_l : long key word
    O. seltext_m : middle key word
    P. seltext_s : short key word
    Q. reptext_ddic : heading (ddic)
    R. ddictxt(1) : (S)hort (M)iddle (L)ong
    S. datatype : datatype
    T. hotspot(1) : hotspot
    Regards
    Anji

Maybe you are looking for

  • Severe Error Ocurred on the Current Command REPORT BUILDER SSRS 2008

    Hi,      I have a report with 6 tabs, I am using totally 8 Stored Procedures for it.I am using SQL SERVER 2008 R2 and the same in production also. Everything works fine when I run the report in my local machine's BIDS, however, when I deploy it into

  • Infernal Kernal Panic Problem

    I can't start my eMac without a Kernal Panic. It works ok for a while if I run DiskWarior or TechTool Pro 4 but soon throw this error up again. I've tried everything, new RAM, Archive and install, zapped PRAM - you name it, I've probabley tried it. A

  • Error in parameter value

    Dear support, I tried the example code STCsinglePeriodMeasure.c for DAQ(6034E)with success. But when I changed the internal timebase from 100KHz to 1250kHz, I received error 10122(Invalid paramValue used). It is defined in nidaqcns.h. Please enlighte

  • Photo shop starter  "my catalog"

    I cannot open photo shop it says that it cannot find "my catalog" I have been using for a long time not I cannot access my pictures... How do I fix this? Vicky

  • Ipad Music Not Distinguishing Genres

    Hello. I have an Ipad Mini and have two different genres of music (Piano and Instrumental). When I open Music->Genres and select either Piano or Instrumental, I then select the Artist associated with that genre, finally it shows all albums that have