Display with vertical lines

I have vertical lines on my screen. Tried hard reset but no success.

Hi. I recently updated to software vesion 2.0.2 and started to notice the vertical lines you describe. I had never noticed them before. I have spoken to Apple iPhone tech support and they say they have never heard of this issue. They have asked me to do a restore on the phone via iTunes to see if it is a software or hardware issue. If it still happens after restore they told me to go to Apple store to see about a possible replacement. I have tried the resore and so far I haven't noticed the lines but it is early days.
By the way I have noticed the lines appear randomly and sometimes when I receive an email and get the audible signal I can see them.
Let me know how you get on if you try to restore iPhone.

Similar Messages

MB Pro RD display with vertical lines / split

Hi, I hv a 15" MB Pro RD which booted up this morning with part of the display vertically split. Pic attached. Can anyone pls advise?
I'm 2 months out of warranty - any suggestions for estimates / parts / locations to do it in orlando?
Thanks

The first step you should take is to make an appointment at an Apple store genius bar and have them find out exactly what is wrong. The evaluation will be FREE regardless of warranty status. You will also be given a cost for the repairs which you may accept or decline.
iFixit.com and Powerbookmedic.com have parts, prices and instructions. Examine those two web sites.
Ciao.

My macbook pro keeps freezing with vertical lines on the screen

I have a 2010 macbook pro that has worked wonderfully until now. As of late it keeps freezing with vertical lines across the screen. To me this indicates a hardware problem, but I ran a diagnostic (restarted while holding D) and it didn't find any errors. It seems that it happens when I move or bump my macbook, leading me to think it may possibly be a disk problem, but I'm not sure how to check this. Anybody else ever have this problem or could suggest a fix for it?

You can try a pram reset, which might help with the display, but the bumoing thing is what concerns me.
PRAM reset:
Power down, power back up and hold the following keys before the start up chime.
option, command, P, R,(no commas) continue to hold these keys till you hear the start up chime 2 times then release.
Reboot see if this helps, the bumping part scares me.
Hope this helps

Generating Report with vertical lines from Designer

Hi:
I would like to get any suggestions about generating tabular reports with vertical lines from Oracle Designer 6.0 on Windows NT.
Any help will be appreciated.
Thanks in advance

Hey c2petrov,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like you are having trouble with the screen. A frustrating situation to be sure. This article addresses issues with video on internal or external displays.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Have a nice day,
Mario

Cannot go past purple screen with vertical lines was opening for a while releasing power button whirl holding down Alt Cmd will no longer respond

iMac Intel mid 2010 not part of later graphics card free fix stuck on purple screen with vertical lines disconnecting power cord then trying to restart holding down Alt Ctl used to open to normal screen. Now will not display always
I5
OsX Mavericks

Unable to see the screen at all. Only have light purple with vertical ines completly across screen. Priot to that it also was green with vertical lines
It is a 2.8 GHZ Intel Graphics Card is ATI HD 5750 Radeon 1024 MB

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my dashboard and my mouse still mouving but with a little square with vertical lines at the right. This appen when i was talking with a friend on Skype. I need help to unlook

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my desktop and my mouse, i mean the arrow and still mouving but with a little square with vertical lines at the right. This appened when i was talking with a friend on Skype, by error i did click on the video and slowly the vertical lines appeared and covered all ma desktop. Since then, it still there and the only things i see it is the vertical lines and the arrow with the little square.
How can i fix this problem ?
En français: j'ai un IMac - Mac OSX version 10.4 et présentement je vois seulement des lignes verticales sur mon bureau et ma souris c'est-à-dire la flèche, bouge mais il y a un petit carré avec aussi des lignes verticales à sa droite. Je pense que ce bug est survenu lorsque j'étais sur Skype avec une amie et que par erreur j'ai cliqué sur l'image de la vidéo et peu à peu les lignes sont appurues et tout l'écran est envahie par ces lignes.
Comment corriger le problème ? Merci à l'avance.
Réjeanne Blouin

Hello, sounds like Video card and/or heat problems.
Have you blown the dust out lately? Let it cool for an hour or so.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).

All field lables for PCUI screens in Portal is displayed with Vertical bar

Hi Group,
In Portals, all PCUI screen Field lables are displayed with vertical bar in the biginning of the field.
can somebody tell me how i can get rid of that vertical bar from all Fields. let me know if there is any SAP Note available for this?
Thanks & regards
Anu.

Hi Siva,
The default behaviour of Top Level Navigation is if there are lot of items in it, it tends to bring a scroll bar to scroll across the items.
Did you tried reducing the font size of the TLN items in the themes, so that they can try and fit in the page without scroll bar appearing.
Otherwise you can consider having hover menu, which will display all items on hovering the parent node. Have a look at the blog for more information
Tag Libraries: Creating a Hover Menu in SAP NetWeaver Portal
Regards,
Ganesh N

ALV Hierarichal display with multiple line headings

Hi,
I have designed an ALV report with Hierarichal display with multiple line headings...
When i change the layout of this report,the headings which we enter manually will not take effect.The column we can hide in the report using the layout management.But the heading remains the same since it was written manually in top of page.
Is there any possiblity to work out the Manual headings based on the layout fields.

Hi,
Do you use REUSE_ALV_HIERSEQ_LIST_DISPLAY? Why do you write heading manually? You can use IT_FIELDCAT parameter for defining a field catalog.

Grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced 6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen

grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (sorry, I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
Thanks for any help!

You have to take the computer to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

My brand new 2.9GHz quad-core Intel Core i5 frozen to blank screen with Vertical lines. Why! any ideas before I send back to store. Thanks

My brand new 2.9GHz quad-core Intel Core i5 JUST straight out of the box worked for 20 minutes, long enough to sort Apple ID etc, then froze to a blank screen with Vertical lines. Why! any ideas before I send back to store. Thanks
ps: mavericks not installed on it yet, didn't even have chance to do anything with it!

None. Take it back ASAP.

I-Mac crash with vertical lines down the screen

My i-Mac is about 4 years old, running OS-X version 10.8.2.
About 2 weeks ago my system suddenly crashed and the whole screen was filled with vertical lines - alternate blue and white.
Yesterday the same thing happened, except that the vertical lines were alternate red and white.
Both times I turned the desktop off, left it for a minute or two, and then turned it back on again. The system then booted up normally and I was able to access all my applications as normal.
To date my i-Mac has been very reliable but I am a bit worried that this 'crash' problem has now occurred twice. I have kept the operating system up-to-date and am running OS-X 10.8.2.
Could anyone please tell me why this problem is occuring and how I can fix it?
Thanks in anticipation.

Thanks for your help.
I have a 24" i-Mac (bought new in 2009), do your comments still apply?'
What do you think could have caused the card to develop this fault? (Currently only internmittent, but it presumably will get worse)?
I will back up my files and go and see my local Apple Store as you suggested, but do you have any idea how much replacing the graphics card on my 24" machine would cost??

Display malfunction- vertical lines on screen - blue, green, and white lines

My 3 week old passort shut down after running out of battery. After recharging, lines appeared on the display and won't go away. I tried serveral restarts.
There are blue and green vertical lines on the left edge of the display and four our so white lines near the bottom of the screen.
Any suggestions?

contact place of purchase to get warranty started, looks like a hardware issue to me
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

16x9 anamorphic clip plays back with vertical lines

I have a clip that is 869x480 anamorphic, square aspect ratio, DV/DVCPRO. Turned off all attributes also.
I put it in a sequence that is NTSC DV 3:2 anamorphic, DV/DVCPRO 16x9. But when I play it back it shifts everything to the left and there are vertical lines along the right side. Lots of them. When I stop playback it looks fine.
What is wrong?

I got the 869x480 from the boards here. Actually, I
changed it to 854x480 after reading a couple more
posts.
The delivery for this video is a quicktime
posted on the web. So I want it as an anmorphic
shape with no letterboxing, like apple's trailers are
formatted.
First off, anamorphic isn't a shape. You can make an anamorphic square or circle, and nobody can stop you. "Anamorphic" as we use it here refers to squeezing an image horizontally so it fits on the delivery format, then unsqueezing it for display.
The same concept applies to the truly anamporphic lenses used in Cinemascope production and projection, and to the squeezing of pixel rations to get a 16:9 or other wide shape into a 4:3 transport and delivery package.
Second, if your delivery is a QT video for the web, listening selectively to numbers thrown around about DV anamporphic isn't going to do you any good.
There is nothing anamorphic about your project. You have no need for it, and I think it's biting you. You have square pixels going in, and the desired end user has a square-pixel monitor. Anamorphia will only mess it up.
The sequence right now is at 720x480 anamorphic and
it is all rendered. But for exporting I use QT
Conversion at a custom frame size of 854x480. To get
the rectangular shape, and not a letterboxed video in
a 4x3 frame. Again, a solution I got from the boards.
OK, so you are resizing, anamprphizing, and recompressing on the way in to your sequence. Then you are resizing, re-anamorphizing, and recompressing on the way out of your sequence.
There is no place for DV in this equation, either.
Decide for sure and for final on your output size (question: will your viewers really have an 854p wide space to see it?)
Make your sequence match that resolution exactly. You don't need preset sequence settings, you need to make your own. Make sure your sequence is square-pixel.
Working farther backwards, make sure your source material matches the sequence exactly. 854x480, or something else if you decide everybody doesn't have 1024 or bigger monitors.
I would bet that, if you do this and take all the unnecessary resizing out of the system, your images will look awesome.
One more little thing: it looks like there is some scanned content with halftones in it. These could be causing some trouble, but you won't really know that until you take out the really obvious problems.
Good luck!

Hp 440 g1 probook screens with vertical lines

hello im using hp probook g1 from morw than 1 year and now im having prob with the screen. some vertical.lines appear on the screen and below portion of the line flashes and show the upper part pf thw screen and below part od the lines fleshes with a period of 2 seconds. plz need guidance how can i solve this issue.

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Display of your Notebook. We will surely assist you with this issue
1. Please check if the Display/Screen of your Notebook shows lines even in BIOS or not
Note: Power ON the Notebook and keep tapping the F10 Key to access the BIOS
2. Please tilt the Screen/Display of the Notebook slowly towards back and the front side, check and verify if the lines are seen at all the angles of the display
3. Please connect an external desktop monitor to your Notebook and check if the lines are shown even on the external monitor
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the White Thumbs Up Button on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

30 Inch Cinema Display with Vertical Streaks

Hi All,
I've started to notice very pale vertical streaks on my screen. So far, they seem to be along the edges and are particularly visible when blues and other dark colors are displayed.
It's not a big deal, but the monitor was about $2,000 and is only about 2 years old.
What is this? Is it "normal"?
I have Apple Care... thinking it might be time to use it!
Thanks,
Robert

Robert, My 30 Apple monitor started with blueish-green vertical lines outlining the texture of my desktop. It is present on photo's, web-pages and even video I may review. Please send me your email and I can send you one of my photo's to see if your problem is the same. I will be meeting with Apple Support tomorrow for help. Sincerely, Joe Ray at: [email protected]

Display with vertical lines

Similar Messages

Maybe you are looking for