Display without decimals
i have a report where the fields are displayed with the decimal places. these fileds are common sap fields like LOT SIZE, STOCK QUANTITY, SALES QUANTITY, etc..
now, i need to display these fields without decimals. so, pls give me the steps how to change the internal table fields. also, pls mention whether we have to chnage these internal table fields just before writing the write statement (we write loop stmt first, then read stmt and then write stmt) or we have to change the fileds even before loop stmt.
pls give me example steps.
Hi ,
try this
<b>Loop at Itab.
write: itab-field no decimals .
Endloop.</b>
reward points if this helps u
ravi
Similar Messages
-
Forcing a number to display without decimals or rounding
I am performing a mathimatical calculation, and I want to use
the result in another calculation. For exampl, my result may be
10.678. I want to use the number 10 in my next calculation, not 11
or 10.678. Is there a mask or function that will allow me to cut my
number off at the decimal place without rounding?int() is always popular.
-
Can we display on the screen for amount without decimals
Dear Freinds,
I have scenario they wanted to give the amount field with decimals......actually the field is standad field
it is betrg ( i.e amount field ) data type of this field is PAD_AMT7S.
Is it possible that on screen can i display without decimals.
Regards
Madhuri.Dear Freinds,
Thanks for replying to my question , i want to modify the value in the input field of the stnadard selection screen.
i.e in infotype 0014 i have the amount field ........( data element is PAD_AMT7S) ...........The user is saying when
iam updating th e value into infotype 0014 for the AMount field BETRG (data type : PAD_AMT7S) he dont want the
decimals coming
ie. actually it is getting uploaded as 20.14 ..........he wants only 20 . My question how can we modify amount field without
decimals points at all ? ......as per my knowledge i can only based on currency code i can either give 2 decimals or 3 decimals
but without decimals can i store on the screen ...........?
During the testing they are saying even if it goes into the data base with decimals doesnt matter but on the screen they wants
only the amount withou decimals. i.e they want to save on the screen field of infotype 0014 betrg amount field as without decimals.
Could any one let me know is it possilble.
regards
madhuri -
Require editable quantity value without Decimals in ALV display
I'm displaying the ALV with quantity in editable mode where the end user gives the quantity value.I need to restrict the user to give the value as a whole number i.e without decimals. How can we do it in ALV. I tried the same by giving the field as type 'N' but still, i can give the value with decimals. It is showing an error since this being an interactive ALV, on clicking the button,the proceess is taking value. Would you guide me
Thanks
RavindraHi,
In the fieldcatalog you should have a field decimals_out, you can set the output decimals there, try setting it in 0.
Hope it helps. -
Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output? I would prefer to use an audio interface for playback and the apple tv as a third display. I know I can go back to system preferences and swap my output back manually, but it is getting to be really inconvienient. Thoughts?
Hi and welcome to Discussions,
have a look at ScreenRecycler http://www.macupdate.com/info.php/id/22908/screenrecycler
Regards
Stefan -
I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.
As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv -
As i had said, I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board? Is there a Fn key combo i'm missing or is the issue more serious then i realize? any and all help and hints would be greatly apprichiated, thanks in advance.
-Powerbook UserThe PowerBooks have an F-key that toggles mirrored and extended mode. My PB is loaned out right now but I think it was f7. The keycap has an icon on two overlapping rectangles, as I recall.
EDIT: Yes! Found a pdf of the PB manual it shows F7 is the toggle: -
Can I modify the column "Net Price" of purchase order to display 3 decimals
Dear expert,
Can I modify the column "Net Price" of purchase order to display 3 decimals?
Looking forward to your reply.
Many thanks.
Best Regards,
MerryHi,
You can easily change ur decimal place in OY04 by seeting number of decimal place to ur currency.
But be careful as it cause a huge effect to ur finance documents, read system message carefully before applying.
Regards
ManUfacTuReR -
OO ALV displaying without Values despite Internal table contains
My below OO ALV displaying without Values despite Internal table contains the values ...
Help please ...
REPORT zsd_concession1 NO STANDARD PAGE HEADING
LINE-SIZE 285
LINE-COUNT 64
MESSAGE-ID zz.
Program Description ******************************
This report is to Calculate consession against Quotations
complying standards for enhanced Performance, Readability &
Maintenance.
Change Log *********************************
Remedy # / Who When Why / What
Transport #
CLASS lcl_event_handler DEFINITION DEFERRED.
*& Data Definitions .
DATA: BEGIN OF vbap_wa,
vbeln TYPE vbak-vbeln, "Quotation#
erdat TYPE vbak-erdat, "Quot date
knumv TYPE vbak-knumv, "Cond Rec#
posnr TYPE vbap-posnr, "Line Item
matnr TYPE vbap-matnr, "Mat#
zansicat TYPE zmarall-zansicat, "AnsiCat#
zansigrd TYPE zmarall-zansigrd, "Grade
zcurrvaltnarea TYPE zco002-zcurrvaltnarea,"Val Area
zcurrcstusd TYPE zco002-zcurrcstusd, "Cost$
zzbrndnm TYPE mara-zzbrndnm, "Brand
zqedscgrp TYPE zglbprc-zqedscgrp, "QE Disc Grp
mstav TYPE mara-mstav, "Status
kwmeng TYPE vbap-kwmeng, "Qty
lprc TYPE konv-kbetr, "List Price ZBP1
sprc TYPE konv-kbetr, "Std Pric ZNAA,ZNAX
netpr TYPE vbap-netpr, "Quot price
mrgn TYPE konv-kbetr, "margin%
END OF vbap_wa,
BEGIN OF konv_wa,
knumv TYPE konv-knumv, "Cond#
kposn TYPE konv-kposn, "Cond Item#
kappl TYPE konv-kappl, "Applic
kschl TYPE konv-kschl, "Cond Typ
kbetr TYPE konv-kbetr, "Price ZBP1,ZNAA,ZNAX
END OF konv_wa,
BEGIN OF vbpa_wa,
vbeln TYPE vbpa-vbeln, "Quot#
posnr TYPE vbpa-posnr, "Item#
parvw TYPE vbpa-parvw, "Prt Fn
kunnr TYPE vbpa-kunnr, "Cust#
END OF vbpa_wa,
BEGIN OF result_wa,
posnr TYPE vbap-posnr, "Line Item
matnr TYPE vbap-matnr, "Mat#
zansicat TYPE zmarall-zansicat, "AnsiCat#
zansigrd TYPE zmarall-zansigrd, "Grade
zcurrvaltnarea TYPE zco002-zcurrvaltnarea,"Val Area
zcurrcstusd TYPE zco002-zcurrcstusd, "Cost$
zzbrndnm TYPE mara-zzbrndnm, "Brand
zqedscgrp TYPE zglbprc-zqedscgrp, "QE Disc Grp
mstav TYPE mara-mstav, "Status
kwmeng TYPE vbap-kwmeng, "Qty
lprc TYPE konv-kbetr, "List Price ZBP1
sprc TYPE konv-kbetr, "Std Pric ZNAA,ZNAX
netpr TYPE vbap-netpr, "Quot price
mrgn TYPE konv-kbetr, "margin%
END OF result_wa.
DATA: ikonv LIKE STANDARD TABLE OF konv_wa,
ivbap LIKE STANDARD TABLE OF vbap_wa,
ivbpa LIKE STANDARD TABLE OF vbpa_wa,
iresult LIKE STANDARD TABLE OF result_wa.
*Work storage
DATA: BEGIN OF ws,
vbeln TYPE vbak-vbeln,
ok_code TYPE sy-ucomm,
alv_save TYPE c, "ALV save
alv_variant TYPE disvariant, "ALV Variant
alv_sort TYPE lvc_t_sort, "Sort table
END OF ws.
*Data declarations for ALV Main list
DATA : ty_lay1 TYPE lvc_s_layo,
it_fieldcat TYPE lvc_t_fcat ,
ty_fieldcat TYPE lvc_s_fcat ,
l_smenu TYPE REF TO cl_ctmenu,
c_alv1 TYPE REF TO cl_gui_alv_grid,
c_cont1 TYPE REF TO cl_gui_custom_container,
e_dclick TYPE REF TO lcl_event_handler.
*Data declarations for ALV Interactive list
DATA : ty_lay2 TYPE lvc_s_layo,
it_fcat TYPE lvc_t_fcat ,
ty_fcat TYPE lvc_s_fcat ,
c_alv2 TYPE REF TO cl_gui_alv_grid,
c_cont2 TYPE REF TO cl_gui_custom_container.
*Field-Symbols
FIELD-SYMBOLS:
<konv> LIKE konv_wa,
<vbap> LIKE vbap_wa.
*Constants
CONSTANTS:
c_end_row TYPE i VALUE 65000.
*CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid IMPORTING e_row.
ENDCLASS. "lcl_event_handler DEFINITION
*CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_double_click.
DATA: sec_wa LIKE LINE OF iresult.
*Reading the selected data into a variable
READ TABLE iresult INDEX e_row-index INTO sec_wa.
*Select the field details of the selected table
SELECT * FROM dd03l INTO CORRESPONDING FIELDS OF TABLE it_dd03l
WHERE tabname EQ ls_dd02l-tabname.
*Calling the ALV containing the field values
CALL SCREEN 101.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_handler IMPLEMENTATION
*& SELECTION-SCREEN.
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_vbeln FOR ws-vbeln DEFAULT '2002354788' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK a.
INITIALIZATION.
PERFORM setup_screen_defaults.
START-OF-SELECTION.
PERFORM gather_report_data.
END-OF-SELECTION.
PERFORM create_output.
*& Form initialization
FORM setup_screen_defaults.
CLEAR: ws, konv_wa, vbap_wa, vbpa_wa.
REFRESH: ivbpa, ikonv, ivbap, iresult.
ENDFORM. " setup_screen_defaults
*& Form gather_report_data
FORM gather_report_data.
SELECT vbeln posnr parvw kunnr
INTO TABLE ivbpa
FROM vbpa
WHERE vbeln IN s_vbeln
AND ( parvw = 'SP' OR "SoldTO
parvw = 'WE' OR "ShipTo
parvw = 'ZT' ). "Top Parent
SELECT vkvbeln vkerdat vkknumv vpposnr vp~matnr
z1zansicat z1zansigrd z2~zcurrvaltnarea
z2zcurrcstusd m1zzbrndnm zg~zqedscgrp
m1mstav vpkwmeng vp~netpr
INTO CORRESPONDING FIELDS OF TABLE ivbap
FROM vbak AS vk
INNER JOIN vbap AS vp
ON vpvbeln = vkvbeln
INNER JOIN zmarall AS z1
ON z1matnr = vpmatnr
INNER JOIN zco002 AS z2
ON z2matnr = vpmatnr
INNER JOIN zglbprc AS zg
ON zgmatnr = vpmatnr
INNER JOIN mara AS m1
ON m1matnr = vpmatnr
WHERE vk~vbeln IN s_vbeln
AND vk~auart = 'AG'."AG = Quot
SORT ivbap BY posnr matnr.
SELECT kvknumv kvkposn kvkappl kvkschl kv~kbetr
INTO TABLE ikonv
FROM konv AS kv
FOR ALL ENTRIES IN ivbap
WHERE kv~knumv = ivbap-knumv
AND kv~kposn = ivbap-posnr
AND kv~kappl EQ 'V'
AND ( kv~kschl EQ 'ZBP1'
OR kv~kschl EQ 'ZNAX'
OR kv~kschl EQ 'ZNAA' ).
SORT ikonv BY knumv kposn.
LOOP AT ivbap ASSIGNING <vbap>.
CLEAR konv_wa.
READ TABLE ikonv INTO konv_wa WITH KEY
knumv = <vbap>-knumv
kposn = <vbap>-posnr
kschl = 'ZBP1'
BINARY SEARCH.
IF sy-subrc EQ 0.
<vbap>-lprc = konv_wa-kbetr.
ENDIF.
READ TABLE ikonv INTO konv_wa WITH KEY
knumv = <vbap>-knumv
kposn = <vbap>-posnr
kschl = 'ZNAX'
BINARY SEARCH.
IF sy-subrc EQ 0.
<vbap>-sprc = konv_wa-kbetr.
ENDIF.
READ TABLE ikonv INTO konv_wa WITH KEY
knumv = <vbap>-knumv
kposn = <vbap>-posnr
kschl = 'ZNAA'
BINARY SEARCH.
IF sy-subrc EQ 0.
<vbap>-sprc = konv_wa-kbetr.
ENDIF.
ENDLOOP.
SORT ivbap BY posnr matnr.
LOOP AT ivbap INTO vbap_wa.
MOVE-CORRESPONDING vbap_wa TO result_wa.
APPEND result_wa TO iresult.
CLEAR: vbap_wa, result_wa.
ENDLOOP.
ENDFORM. " gather_report_data
*& Form create_output
FORM create_output.
CALL SCREEN 100.
FREE: iresult.
ENDFORM. " create_output
*& Module PBO_0100 OUTPUT
text
MODULE pbo_0100 OUTPUT.
SET PF-STATUS '0100'.
SET TITLEBAR '0100'.
IF c_cont1 IS INITIAL.
*Creating object of container
CREATE OBJECT c_cont1
EXPORTING
container_name = 'CCONT1'.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Creating object of alv
CREATE OBJECT c_alv1
EXPORTING
i_parent = c_cont1.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Alv layout
PERFORM alv_100_layout.
PERFORM save_alv_layout.
*Alv field catalogue
PERFORM alv_100_fieldcat.
*Displaying the ALV grid
CALL METHOD c_alv1->set_table_for_first_display
EXPORTING
is_layout = ty_lay1
i_save = ws-alv_save
is_variant = ws-alv_variant
CHANGING
it_outtab = iresult[]
it_sort = ws-alv_sort
it_fieldcatalog = it_fieldcat[].
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Create object of the event class
*and setting handler for double click
CREATE OBJECT e_dclick.
SET HANDLER e_dclick->handle_double_click FOR c_alv1.
ENDIF.
ENDMODULE. " PBO_0100 OUTPUT
*& Module PAI_0100 INPUT
text
MODULE pai_0100 INPUT.
ws-ok_code = sy-ucomm.
CASE ws-ok_code.
WHEN 'BACK'.
CALL SELECTION-SCREEN 1000.
CLEAR ws-ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
CLEAR ws-ok_code.
EXIT.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
CLEAR ws-ok_code.
EXIT.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " PAI_0100 INPUT
*& Form alv_100_layout
text
--> p1 text
<-- p2 text
FORM alv_100_layout.
ty_lay1-numc_total = 'X'. " Numc total line
ty_lay1-cwidth_opt = 'X'. " Optimal column width
ty_lay1-detailinit = 'X'. " Show values that are initial in
ty_lay1-sel_mode = 'A'. " Column selection mode
ty_lay1-no_merging = 'X'. " No merging while sorting columns
ty_lay1-keyhot = 'X'.
ty_lay1-grid_title = 'SD Concessions'.
ty_lay1-zebra = 'X'.
ty_lay1-no_toolbar = ' '.
ENDFORM. " alv_100_layout
*& Form alv_100_fieldcat
text
--> p1 text
<-- p2 text
FORM alv_100_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 1.
ty_fieldcat-fieldname = 'posnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Item#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 2.
ty_fieldcat-fieldname = 'matnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Mat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 3.
ty_fieldcat-fieldname = 'zansicat'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'AnsiCat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 4.
ty_fieldcat-fieldname = 'zansigrd'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Grade'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 5.
ty_fieldcat-fieldname = 'zcurrvaltnarea'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Val Area'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 6.
ty_fieldcat-fieldname = 'zcurrcstusd'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Cost $'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 7.
ty_fieldcat-fieldname = 'zzbrndnm'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Brand'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 8.
ty_fieldcat-fieldname = 'zqedscgrp'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'QE'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 9.
ty_fieldcat-fieldname = 'mstav'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Status'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 9.
ty_fieldcat-fieldname = 'kwmeng'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Qty'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 10.
ty_fieldcat-fieldname = 'lprc'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'List Price'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 11.
ty_fieldcat-fieldname = 'sprc'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Discount'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 12.
ty_fieldcat-fieldname = 'netpr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Quot Price'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 13.
ty_fieldcat-fieldname = 'mrgn'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Margin%'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
ENDFORM. " alv_100_fieldcat
*& Module PBO_0101 OUTPUT
text
MODULE pbo_0101 OUTPUT.
*Check if the Custom container exists.
IF c_cont2 IS INITIAL.
*Creating container object
CREATE OBJECT c_cont2
EXPORTING
container_name = 'CCONT2'.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*creating ALV grid for interactive list
CREATE OBJECT c_alv2
EXPORTING
i_parent = c_cont2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ALV layout
PERFORM alv_101_layout.
*ALV fieldcatalogue
PERFORM alv_101_fieldcat.
*Sorting the output by field position
SORT iresult BY posnr.
*ALV for display field details
CALL METHOD c_alv2->set_table_for_first_display
EXPORTING
is_layout = ty_lay2
CHANGING
it_outtab = iresult[]
it_fieldcatalog = it_fieldcat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. " PBO_0101 OUTPUT
*& Module PAI_0101 INPUT
text
MODULE pai_0101 INPUT.
ENDMODULE. " PAI_0101 INPUT
*& Form alv_101_layout
text
--> p1 text
<-- p2 text
FORM alv_101_layout.
ty_lay2-grid_title = 'Line Details'.
ty_lay2-zebra = 'X'.
ty_lay2-no_toolbar = 'X'.
ENDFORM. " alv_101_layout
*& Form alv_101_fieldcat
text
--> p1 text
<-- p2 text
FORM alv_101_fieldcat.
REFRESH it_fieldcat.
REFRESH it_fcat.
CLEAR ty_fcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 1.
ty_fieldcat-fieldname = 'posnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Item#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 2.
ty_fieldcat-fieldname = 'matnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Mat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 3.
ty_fieldcat-fieldname = 'zansicat'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'AnsiCat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 4.
ty_fieldcat-fieldname = 'zansigrd'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Grade'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 5.
ty_fieldcat-fieldname = 'zcurrvaltnarea'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Val Area'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
ENDFORM. " alv_101_fieldcat
*& Form save_alv_layout
text
--> p1 text
<-- p2 text
form save_alv_layout.
ws-alv_save = 'A'.
ws-alv_variant-report = sy-repid.
endform. " save_alv_layoutHello
Creating fieldcatalogs manually is one of the major error sources in ALV programming.
There is hardly any reason why NOT to use the standard-fm LVC_FIELDCATALOG_MERGE in order to create a proper fieldcatalog.
If you need some modification of the standard fieldcatalog (e.g. renaming of columns, etc.) just do your post-processing after calling the fm.
Regards
Uwe -
I have a full screen and cannot see my bookmarks.
How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily. -
W530 : How to connect 4 external displays without USB DOC
I want to connect multi displays without USB-DOC.
Is it correct as follows?
1. Change connector type from mini-display port to display port.
2. "Display port to Dual display port adaptor" connect.
3. At Each port, more "Display port to Dual display port adaptor" connect..
Please tell me solution.
Thanks.
Solved!
Go to Solution.This setup won't work.
You would need a Series 3 Dock workstation with 2 sets of DP ports.
Then you would need a dp splitter for each of the DP ports on the dock.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Run iPhoto slideshow on 2nd display without 1st display going black?
Hi there,
I can't seem to find a clear answer on this one. I have just connected a 2nd display to my mac mini via the thunderbolt connection. When I put iPhoto 11 onto the 2nd display desktop and run a slideshow it plays on the 2nd screen but my 1st screen goes black, which isnt ideal as I want to be able to carry on working on my 1st screen.
Is iPhoto 11 able to run a slideshow on a 2nd display without 1st display going black? If not, is there a way around this by using other software?
I have the 2nd display set up in extended mode not mirror.
I am running OSX 10.9.2.
Many thanks,
Andy.Is iPhoto 11 able to run a slideshow on a 2nd display without 1st display going black?
No.
There may well be, but it's not possible with Aperture either.
Alternatives to iPhoto's slideshow include:
iMovie is on every Mac sold.
Others, in order of price:
PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for. -
I need to use the new Thunderbolt Display without the stand on a VESA mount, but before I order it I need to make sure it will fit height-wise in the allotted space.
The ThunderBolt display specs page has the same sizes listed as the 27" LED Cinema Display specs page (web archive). I just measured my Cinema Display for you and the height of the display itself without the stand is 15 5/8". However, you will need some additional space at the bottom for air flow intake. These displays get hot and need proper ventilation so do not block the vents on the bottom. Also the bottom vents are where the speakers are.
Hope this helps. -
DB Connect: Data displayed without authorisation check
Hallo Guys,
I just set up a DB connect for viewing some data from an Oracle database.
When I want to view 1 table (Source system-> DB-connect->Select database tables -> Display table content), a message is displayed in GREEN 'data is displayed without authorisation check'.
But still I can't see any data!
Anyone a suggestion?
Many thanks
KurtHi,
most likely your table have unsupported field name or data types...
I suggest creating a simple view with field anmes in upper case and char data types and see the data from this view in order to ensure your connection is fine and the user you are using has all privileges to read this table in Oracle....
hope this helps....
Olivier. -
Possible to close the display without turning in to Safe Sleep???
Does anyone know if its possible to close the display without turning into sasfe sleep???
It would be useful while working with the a big externel dispay like the cinema display.
thanks
macbook Mac OS X (10.4.7)Actually, I don't think you need to have it plugged in.
This: "You can use your MacBook in lid closed mode if the computer is connected to an external display, keyboard, and mouse."
Came from this article: http://docs.info.apple.com/article.html?artnum=303722#800
Maybe you are looking for
-
I have a MacBook Pro from September 2007 that I want to upgrade to the latest OS. I have 10.5.8 on it now, but can't seem to find the code or files any where to upgrade it to 10.6.8 (Snow Leopard) so I can then step it up to Mountain Lion. Anyone h
-
I have an HP Pavilion M8200N DeskTop looking to upgrade it?
I was doing some reason and its not a bad desktop, nothing super crazy but good enough for most of my video editing and photo work. Im looking to upgrade it as the only thing laking is the video card. So can you please tell me what the best video car
-
Database check within javascript
I have javascript validation code, but some of it is depended on database results. So, I just want to do a simple database check and then run javascript code based on the query results. For example: <script language="JavaScript"> function validate_fo
-
When you drag a link onto your desktop, how do you change the image for the shortcut?
When you drag a link onto your desktop, how do you change the image for the shortcut?
-
Hi, So i have just made the log in page for a basebase ball team. When i go Log in - http://redfernredsox.businesscatalyst.com/log-in.html ( Enter any username or password still does it) I enter The Username and Password - then when i press log in th