Display won't sleep when converting video to iphone in itunes

Whenever I convert video files to iphone under the advanced menu in itunes, my display wont sleep and the screensaver will not come on. I tried using the hot corners and the display sleeps for a few seconds and them awakens. Since conversions can take quite a while, is there any alternate method to sleep or temporarily shut off the display. I have also tried the sleep display widget and it does nothing for me.
Thanks!

if it's still within 12 months hardware warranty call apple and have tech support diagnose the fault. If it turns out to be hardware related -which mine was- SEND IT BACK. IF it's hardware, there's almost zip you can do except wait longer and get closer to the end of your warranty.
My sleep issue...
http://discussions.apple.com/message.jspa?messageID=4126127#4126127
was hardware related and I ended getting a refund. Admittedly I have had a REALLY duff machine and the sleep issue was the last in a run of hardware malfunctions but if I never pursued Apple regarding a seemingly innocuous issue I would have come to the end of my warranty and been stuck with it. Now I have my money back - enough to buy a 17" C2D with a 200GB HD for less than I bought the original 15 in CD for. If it's broken get it fixed.
Hope this helps.
Ben.

Similar Messages

Won't sleep when I close the lid - HELP!

A while ago, my iBook G4 1GHz was knocked off of a table. The display was smashed and the whole display assembly was destroyed. I bought a new (used) display assembly and installed it. Worked fine, but when I closed the lid, the iBook woudn't sleep. I checked the placement of the magnet in the top case and I reset the PMU. Still no sleep. So I contacted the company that sold me the display and got a different one. Still won't sleep when I close the lid. I checked all of the energy settings, reset the PMU and even tried to force sleep with a magnet from another broken iBook. Still no sleep when I close the lid. It will sleep when I choose sleep from the Apple menu (OS Tiger) and when it sits for a while with the lid open, but not when I close the lid. Any thoughts?

My original problem has not been solved. The iBook still won't go to sleep when I close the lid. I have checked out any possible software causes, and have ruled them out. I have checked to make sure no keys were being pressed when I closed the lid. I took a magnet from another iBook top case and ran it down the side of the display to try to force sleep. No effect. I don't have any Firewire or USB devices attached, to that's not it. Apple, this board, PBFixit.com, and my local Apple-affiliated repair center have no idea why I am having this problem. Two display assemblies have experienced this problem. The original display had been destroyed in a drop. Could some internal damage, like maybe to the logic board, result in such a problem? It's odd that I am the only person out there who has had this problem. Weird, to be sure.

Display won't sleep after being in suspend once.

When rebooting the computer, the display sleeps after set interval and can manually be put to sleep using shift+ctrl+eject.
However if the computer goes to sleep or I myself close the lid to make it sleep, the display won't sleep again.
The display won't sleep after set interval in power settings and when I press shift+ctrl+eject the keyboard backlit turns off but the screen stays on.
The only way to make it sleep is to close the lid.
I have tried resetting SMC and NVRAM but to no avail.
I have the first generation aluminium macbook.
Does anyone else have this problem?
I have had this problem both in 10.6 and 10.8
Regards Robin Hansson

When rebooting the computer, the display sleeps after set interval and can manually be put to sleep using shift+ctrl+eject.
However if the computer goes to sleep or I myself close the lid to make it sleep, the display won't sleep again.
The display won't sleep after set interval in power settings and when I press shift+ctrl+eject the keyboard backlit turns off but the screen stays on.
The only way to make it sleep is to close the lid.
I have tried resetting SMC and NVRAM but to no avail.
I have the first generation aluminium macbook.
Does anyone else have this problem?
I have had this problem both in 10.6 and 10.8
Regards Robin Hansson

Display won't sleep and screen saver won't sart

I upgraded to the new OS and the display won't sleep and screen saver won't come on. Help please.

Long shot.
Do a backup.
Quit the application.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Utilities/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

Got problems when converting video to 640*480 m4v

guys, I got compatibility issues when convert videos to 640*480 h264 m4v.
I tried MepgStreamclip, and the export to mp4 quicktime mov in Quicktime. ALL FAILED.
I followed all these 1.5mbps, 640*480, aac-lc requirements when did the conversion.However, my ipod will not recognize of the files.
I have also noticed that the "Export to Ipod" preset in Quicktime has been changed to 640*480. BUT, what keeps annoying me is the preset is so idiotic!! It ignores the source bps and simply converts everything to 1.5mbps. I got 25mb file after conversion as the source file is 11mb.
Could anyone kindly point out the Right procedure to convert video to ipod format Manually...... I want to have full control when I am doing this.
thanks a lot

any suggestions?

MacBook Pro won't sleep when lid is closed and battery lights won't work?

I have a 2010 MacBook Pro 15" and ever since I got it, the battery indicator lights wouldn't light up (not that big of a deal) and the computer wouldn't sleep when I closed the lid.
I've reset the NVRAM/PRAM, the SMC and verified/repaired my hard disk as needed. But the computer still won't sleep when I close the lid (regardless if the machine is plugged into a charger or not). Is there a known fix for this problem? I've been searching through the forums and troubleshooting from advice that other people have suggested, but nothing seems to be working. Any help is greatly appreciated!

This exact thing happened to me. Resetting the SMC solved all my problems. Here's a link to how to do it: Intel-based Macs: Resetting the System Management Controller (SMC) Hope it works!

MacBook Pro won't sleep when charging

My 15" i5 MacBook Pro won't sleep when charging; a reboot of the machine solves the problem temporarily, but it always recurs. When I close the lid and listen carefully, I can hear hard drive activity; the drive sounds like it keeps spinning up every 10 seconds or so.
This is not an issue when trying to sleep when running on the battery only. Any advice?

I don't have launch2net installed.
I'm not sure how this will help, but here's the last 5 lines from Console:
11-07-13 5:19:46 PM          Butler[156]          cache: adding applications...
11-07-13 5:19:46 PM          Butler[156]          cache: adding addresses...
11-07-13 5:19:47 PM          Butler[156]          cache: categorizing...
11-07-13 5:19:49 PM          Butler[156]          updated abbreviations cache (enabled)
11-07-13 5:19:58 PM          SIMBL Agent[133]          warning: failed to get scripting definition from /Applications/Utilities/Console.app; it may not be scriptable.

Macbook Pro won't sleep when lid shuts or hit sleep

Hey Everyone,
So after the latest update my Macbook pro no longer immediately sleeps after shutting the lid. It also won't sleep when 'sleep' is hit in the apple menu. It's actually really annoying as I need it for security.
Does anyone know how to fix this problem?

Try Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Ibook g3 won't sleep when plug in

hi when i plug in my ibook g3 and then put it in sleepmode it just wakes up it won't sleep when plug in help how do i fi this

Hello,
Try resetting the PMU
Best of luck.

MBP won't sleep when charging

My 15" i5 MacBook Pro won't sleep when charging; a reset of the SMC solves the problem temporarily, but it always recurs. Interestingly, the sleep indicator light pulses as if the machine is sleeping, but I can clearly hear hard drive activity; the drive sounds like it keeps spinning up every 10 seconds or so. This is not an issue when trying to sleep when running on the battery only. Any advice?

I would just buy a wall charger for the touch and leave your MBP alone. If you really only wanted to charge it from the MBP, just make sure it doesn't sleep when plugged into the power adapter.

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen that connect to itunes. so when i connect my iphone to iTunes, it says"itunes has detected

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopeless

If you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.

Problems with converting Videos With the new itunes software

i have triend converting videos with the new itunes softwar. but all it seems to do is make the screen go white or make the video have no sound. does anyone know whats wrong with it

Try getting a dif. kind of converter. It didnt work for me either. I tried quite a few, until I came across Xilsoft Video Converter. Absolutely free.

Convert Video to iPhone/iPod

According to the manual and the help windows, I should be able to select or right click on a video file in the iTunes library and "Convert Video to iPhone/iPod." However, I do not find this function. All I see is "Convert to mp3." I seem to have the latest version of iTunes 7.7.1.

Hi, Nouska.
As explained in this article in the Apple Knowledge Base, You can convert most videos to work with iPod (emphasis added).
Unfortunately though, iTunes supports some video files that cannot be played on iPods. So it's likely the reason you're not seeing the option to "Convert Video to iPod/iPhone" is that the files are not encoded in a certain way .

HT1386 When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software.

When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software. I have tried to re-set up my phone but it makes no difference and deletes everything off my phone.

bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

Can't delete videos from iPhone on iTunes??? WHY? Help

Hello.
I have iphone 5 and I unloaded videos some time ago, after that I deleted them on phone, but
when I open my iPhone in iTunes it still shows that movies and that space is used for them.
I can't delete them in iTunes, there is no such option.
Please advise what to do and how do delete these files properly?

They don't have a cloud icon next to them at all do they? If so they are stored in the cloud and not actually on the phone at all.
Regards,
Steve

Display won't sleep when converting video to iphone in itunes

Similar Messages

Maybe you are looking for