Display wont wake up and static sound from display

So I have my mac mini hooked up to a vizio display with a hdmi cable. If I leave the computer for a while and try to wake it the screen will just stay blue and I have to reset the computer to get it back to normal. Also when I switch the sound output to the tv from the mac I will just get static.

Problems related to liquid damage can manifest in different ways.
It is hard to recover from liquid damage.
Best.

Similar Messages

Elitebook 2540p: Faint sound and static coming from speakers...Need Help!

I am having issues with my new 2540P. I can hear faint sound and static coming from my speakers as well as my headphones when I plug into the jack. I first started having this issue when I plugged additional speakers into the jack and USB while talking on Skype..
I am running Win7. I tried troubleshooting drivers and hardware, disabling and enabling, and a system restore going back one day...but no luck. When I disable the speakers, I stopped hearing even the faint sound. I also tried plugging and unplugging the jack 20 times.
Is it possible that this is a hardware failure (jack and/or sound card)?
Does anyone have other suggestions?

I am running XP and have same problem. Sound now gone after "pop". Customer services suggests hardware failure and send back to factory. Flashing BIOS and updating IDT audio driver will not fix the problem.
Possible speaker failure or audio chip failure.

HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

Low and unclear sound from headphone HP Pavilion G6 2228tu

laptop hp pavillion g6 2228TU OS windows 8 pro 64 bit
every thing was working fine.. but from last 2-3 days i faced a problem of low and cracking sound from headphone ..
laptop speraker are working fine .. but when I connect headphone to audio port .. sounds comes out to be very low and unclear.
I tried headphone with my desktop and mobile but it was working fine.
I called HP custmor support.. they gave a link of sound driver.. i updated sound driver but no solution comes out..

Hello Deepak-Kumar,
You’re having a problem with the sound not be very loud.
Go to device manager and uninstall the IDT audio.
Do not restart the computer.
Now install the updated sound driver.
Since it has not been to long since the problem started, you can run a system restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to do a restore.
Let me know how everything goes.
Have a good day.

IMac running 10.8.6 doesn't display entire desktop? Reset display to various options and it doesn't display the entire desktop.

iMac running 10.8.6 doesn't display entire desktop? Reset display to various options and it doesn't display the entire desktop. (asking for a friend, not my iMac)

I think you wanted to say 10.6.8. 10.8.6 does not exist.
The first thing I think is that zoom may be enabled. On Mac OS X 10.6.8, a way to disable it is to hold the Control key and scroll down with the mouse or trackpad until you can see the whole display. Another way would be to disable zoom in System Preferences > Universal Access

Difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)?

May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different. Its so confusing! I want to purchase a secondary display for my 21" iMac, but idk the difference between the two.
furthermore, another question i have is, is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
please help, thanks!

rae90 wrote:
May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different.
One has thunderbolt capabilities, the other doesn't.
is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
No you can get a larger one. Maybe not an Apple one, but certainly another brand.

MS NLB with ASA and Static NAT from PUP to NLB IP

Hi all,
I am trying to get MS NLB up and running. It is almost all working. Below is my physical setup.
ASA 5510 > Cat 3750X >2x ESXi 5.1 Hosts > vSwitch > Windows 2012 NLB Guest VMs.
I have two VMs runing on two different ESXi hosts. They have two vNICs. One for managment and one for inside puplic subnet. The inside puplic subnet NICs are in the NLB cluster. The inside public subnet is NATed on the ASA to a outide public IP.
192.168.0.50 is the 1st VM
192.168.0.51 is the 2nd VM
192.168.0.52 is the cluster IP for heartbeat
192.168.0.53 is the cluster IP for NLB traffic.
0100.5e7f.0035 is the cluster MAC.
The NLB cluster is using MULTICAST
I have read the doumentation for both the ASA and CAT switch for adding a static ARP using the NLB IP and NLB MAC.
For the ASA I found
http://www.cisco.com/en/US/docs/security/asa/asa84/asdm64/configuration_guide/mode_fw.html#wp1226249
ASDM
Configuration > Device Management > Advanced > ARP > ARP Static Table
I was able to add my stic ARP just fine.
However, the next step was to enable ARP inspection.
Configuration > Device Management > Advanced > ARP > ARP Inspection
My ASDM does not list ARP Inspection, only has the ARP Static Table area. Not sure about this.
For the CAT Switch I found
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a0080a07203.shtml
I added the both the ARP and Static MAC. For the static MAC I used the VLAN ID of the inside public subnet and the interfaces connected to both ESXi hosts.
On the ASA I added a static NAT for my outside Public IP to my inside pupblic NLB IP and vise versa. I then added a DNS entry for our domain to point to the outside public IP. I also added it to the public servers section allowing all IP traffic testing puproses.
At any rate the MS NLB is working ok. I can ping both the Public IP and the Inside NLB IP just fine from the outside. (I can ping the inside NLB IP becuase I'm on a VPN with access to my inside subnets) The problem is when I go to access a webpade from my NLB servers using the DNS or the Public IP I get a "This Page Can't Be Displyed" messgae. Now while on the VPN if I use the same URL but insied use the NLB IP and not the Public IP it works fine.
So I think there is soemthing wrong with the NATing of the Public to NLB IP even tho I can ping it fine. Below is my ASA Config. I have bolded the parts of Interest.
Result of the command: "show run"
: Saved
ASA Version 8.4(4)9
hostname MP-ASA-1
enable password ac3wyUYtitklff6l encrypted
passwd ac3wyUYtitklff6l encrypted
names
dns-guard
interface Ethernet0/0
nameif outside
security-level 0
ip address 198.XX.XX.82 255.255.255.240
interface Ethernet0/1
description Root Inside Interface No Vlan
speed 1000
duplex full
nameif Port-1-GI-Inside-Native
security-level 100
ip address 10.1.1.1 255.255.255.0
interface Ethernet0/1.2
description Managment LAN 1 for Inside Networks
vlan 2
nameif MGMT-1
security-level 100
ip address 192.168.180.1 255.255.255.0
interface Ethernet0/1.3
description Managment LAN 2 for Inside Networks
vlan 3
nameif MGMT-2
security-level 100
ip address 192.168.181.1 255.255.255.0
interface Ethernet0/1.100
description Development Pubilc Network 1
vlan 100
nameif DEV-PUB-1
security-level 50
ip address 192.168.0.1 255.255.255.0
interface Ethernet0/1.101
description Development Pubilc Network 2
vlan 101
nameif DEV-PUB-2
security-level 50
ip address 192.168.2.1 255.255.255.0
interface Ethernet0/1.102
description Suncor Pubilc Network 1
vlan 102
nameif SUNCOR-PUB-1
security-level 49
ip address 192.168.3.1 255.255.255.0
interface Ethernet0/1.103
description Suncor Pubilc Network 2
vlan 103
nameif SUNCOR-PUB-2
security-level 49
ip address 192.168.4.1 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
boot system disk0:/asa844-9-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network Inside-Native-Network-PNAT
subnet 10.1.1.0 255.255.255.0
description Root Inisde Native Interface Network with PNAT
object network ASA-Outside-IP
host 198.XX.XX.82
description The primary IP of the ASA
object network Inside-Native-Network
subnet 10.1.1.0 255.255.255.0
description Root Inisde Native Interface Network
object network VPN-POOL-PNAT
subnet 192.168.100.0 255.255.255.0
description VPN Pool NAT for Inside
object network DEV-PUP-1-Network
subnet 192.168.0.0 255.255.255.0
description DEV-PUP-1 Network
object network DEV-PUP-2-Network
subnet 192.168.2.0 255.255.255.0
description DEV-PUP-2 Network
object network MGMT-1-Network
subnet 192.168.180.0 255.255.255.0
description MGMT-1 Network
object network MGMT-2-Network
subnet 192.168.181.0 255.255.255.0
description MGMT-2 Network
object network SUNCOR-PUP-1-Network
subnet 192.168.3.0 255.255.255.0
description SUNCOR-PUP-1 Network
object network SUNCOR-PUP-2-Network
subnet 192.168.4.0 255.255.255.0
description SUNCOR-PUP-2 Network
object network DEV-PUB-1-Network-PNAT
subnet 192.168.0.0 255.255.255.0
description DEV-PUB-1-Network with PNAT
object network DEV-PUB-2-Network-PNAT
subnet 192.168.2.0 255.255.255.0
description DEV-PUB-2-Network with PNAT
object network MGMT-1-Network-PNAT
subnet 192.168.180.0 255.255.255.0
description MGMT-1-Network with PNAT
object network MGMT-2-Network-PNAT
subnet 192.168.181.0 255.255.255.0
description MGMT-2-Network with PNAT
object network SUNCOR-PUB-1-Network-PNAT
subnet 192.168.3.0 255.255.255.0
description SUNCOR-PUB-1-Network with PNAT
object network SUNCOR-PUB-2-Network-PNAT
subnet 192.168.4.0 255.255.255.0
description SUNCOR-PUB-2-Network with PNAT
object network DEV-APP-1-PUB
host 198.XX.XX.XX
description DEV-APP-2 Public Server IP
object network DEV-APP-2-SNAT
host 192.168.2.120
description DEV-APP-2 Server with SNAT
object network DEV-APP-2-PUB
host 198.XX.XX.XX
description DEV-APP-2 Public Server IP
object network DEV-SQL-1
host 192.168.0.110
description DEV-SQL-1 Inside Server IP
object network DEV-SQL-2
host 192.168.2.110
description DEV-SQL-2 Inside Server IP
object network SUCNOR-APP-1-PUB
host 198.XX.XX.XX
description SUNCOR-APP-1 Public Server IP
object network SUNCOR-APP-2-SNAT
host 192.168.4.120
description SUNCOR-APP-2 Server with SNAT
object network SUNCOR-APP-2-PUB
host 198.XX.XX.XX
description DEV-APP-2 Public Server IP
object network SUNCOR-SQL-1
host 192.168.3.110
description SUNCOR-SQL-1 Inside Server IP
object network SUNCOR-SQL-2
host 192.168.4.110
description SUNCOR-SQL-2 Inside Server IP
object network DEV-APP-1-SNAT
host 192.168.0.120
description DEV-APP-1 Network with SNAT
object network SUNCOR-APP-1-SNAT
host 192.168.3.120
description SUNCOR-APP-1 Network with SNAT
object network PDX-LAN
subnet 192.168.1.0 255.255.255.0
description PDX-LAN for S2S VPN
object network PDX-Sonicwall
host XX.XX.XX.XX
object network LOGI-NLB--SNAT
host 192.168.0.53
description Logi NLB with SNAT
object network LOGI-PUP-IP
host 198.XX.XX.87
description Public IP of LOGI server for NLB
object network LOGI-NLB-IP
host 192.168.0.53
description LOGI NLB IP
object network LOGI-PUP-SNAT-NLB
host 198.XX.XX.87
description LOGI Pup with SNAT to NLB
object-group network vpn-inside
description All inside accessible networks
object-group network VPN-Inside-Networks
description All Inside Nets for Remote VPN Access
network-object object Inside-Native-Network
network-object object DEV-PUP-1-Network
network-object object DEV-PUP-2-Network
network-object object MGMT-1-Network
network-object object MGMT-2-Network
network-object object SUNCOR-PUP-1-Network
network-object object SUNCOR-PUP-2-Network
access-list acl-vpnclinet extended permit ip object-group VPN-Inside-Networks any
access-list outside_access_out remark Block ping to out networks
access-list outside_access_out extended deny icmp any any inactive
access-list outside_access_out remark Allow all traffic from inside to outside networks
access-list outside_access_out extended permit ip any any
access-list outside_access extended permit ip any object LOGI-NLB--SNAT
access-list outside_access extended permit ip any object SUNCOR-APP-2-SNAT
access-list outside_access extended permit ip any object SUNCOR-APP-1-SNAT
access-list outside_access extended permit ip any object DEV-APP-2-SNAT
access-list outside_access extended permit ip any object DEV-APP-1-SNAT
access-list outside_cryptomap extended permit ip object-group VPN-Inside-Networks object PDX-LAN
pager lines 24
logging asdm informational
mtu outside 1500
mtu Port-1-GI-Inside-Native 1500
mtu MGMT-1 1500
mtu MGMT-2 1500
mtu DEV-PUB-1 1500
mtu DEV-PUB-2 1500
mtu SUNCOR-PUB-1 1500
mtu SUNCOR-PUB-2 1500
mtu management 1500
ip local pool Remote-VPN-Pool 192.168.100.1-192.168.100.20 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any Port-1-GI-Inside-Native
icmp permit any MGMT-1
icmp permit any MGMT-2
icmp permit any DEV-PUB-1
icmp permit any DEV-PUB-2
icmp permit any SUNCOR-PUB-1
icmp permit any SUNCOR-PUB-2
asdm image disk0:/asdm-649-103.bin
no asdm history enable
arp DEV-PUB-1 192.168.0.53 0100.5e7f.0035 alias
arp timeout 14400
no arp permit-nonconnected
nat (Port-1-GI-Inside-Native,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (DEV-PUB-1,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (DEV-PUB-2,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (MGMT-1,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (MGMT-2,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (SUNCOR-PUB-1,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (SUNCOR-PUB-2,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (DEV-PUB-1,outside) source static DEV-PUP-1-Network DEV-PUP-1-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (DEV-PUB-2,outside) source static DEV-PUP-2-Network DEV-PUP-2-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (MGMT-1,outside) source static MGMT-1-Network MGMT-1-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (MGMT-2,outside) source static MGMT-2-Network MGMT-2-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (Port-1-GI-Inside-Native,outside) source static Inside-Native-Network Inside-Native-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (SUNCOR-PUB-1,outside) source static SUNCOR-PUP-1-Network SUNCOR-PUP-1-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (SUNCOR-PUB-2,outside) source static SUNCOR-PUP-2-Network SUNCOR-PUP-2-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
object network Inside-Native-Network-PNAT
nat (Port-1-GI-Inside-Native,outside) dynamic interface
object network VPN-POOL-PNAT
nat (Port-1-GI-Inside-Native,outside) dynamic interface
object network DEV-PUB-1-Network-PNAT
nat (DEV-PUB-1,outside) dynamic interface
object network DEV-PUB-2-Network-PNAT
nat (DEV-PUB-2,outside) dynamic interface
object network MGMT-1-Network-PNAT
nat (MGMT-1,outside) dynamic interface
object network MGMT-2-Network-PNAT
nat (MGMT-2,outside) dynamic interface
object network SUNCOR-PUB-1-Network-PNAT
nat (SUNCOR-PUB-1,outside) dynamic interface
object network SUNCOR-PUB-2-Network-PNAT
nat (SUNCOR-PUB-2,outside) dynamic interface
object network DEV-APP-2-SNAT
nat (DEV-PUB-2,outside) static DEV-APP-2-PUB
object network SUNCOR-APP-2-SNAT
nat (SUNCOR-PUB-2,outside) static SUNCOR-APP-2-PUB
object network DEV-APP-1-SNAT
nat (DEV-PUB-1,outside) static DEV-APP-1-PUB
object network SUNCOR-APP-1-SNAT
nat (SUNCOR-PUB-1,outside) static SUCNOR-APP-1-PUB
object network LOGI-NLB--SNAT
nat (DEV-PUB-1,outside) static LOGI-PUP-IP
object network LOGI-PUP-SNAT-NLB
nat (outside,DEV-PUB-1) static LOGI-NLB-IP
access-group outside_access in interface outside
access-group outside_access_out out interface outside
route outside 0.0.0.0 0.0.0.0 198.145.120.81 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 outside
http 10.1.1.0 255.255.255.0 Port-1-GI-Inside-Native
http 192.168.180.0 255.255.255.0 MGMT-1
http 192.168.100.0 255.255.255.0 Port-1-GI-Inside-Native
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d6f9f8e2113dc03cede9f2454dba029b
: end
Any help would be great! I think the issue is in teh NAT as I am able to access NLB IP from the outside and could not do that before adding the Static ARP stuff.
Thanks,
Chris

Also If I change to NAT from the public IP to the NLB IP to use either one of the phsyical IPs of the NLB cluster (192.168.0.50 or 51) it works fine when using the public IP. So it's definatly an issue when NATing the VIP of NLB cluster.
Chris

Strange problem and clicking sound from speakers!

I have problem with sound but this is strange one and i can't find solution anywhere... I am pretty good with computers and i usualy find solutions on internet when i have problem but this is something i can't solve by myself... My laptop is HP 355 G2 and i have Windows 10 installed on it but the same problem was on Windows 8.1 too... So after clean installation of Win10 the sound was good and worked normaly for 2-3 days and now i only hear a clicking sound from speakers when audio is playing but the strange thing is that when i pick up laptop from the table the sound start to work for few seconds and then the clicking sound comes back again, so i suspect that this has something to do with accelerometer which is built in laptop for hard disc parking in case of drop or something like that... I tryed to uninstal/disable driver for accelerometer but windows install it again emidiatly after reboot, i tryed clean install few times and problem apears again and again... I just don't know anymore what to try to do in order to solve this so if anyone know anything about this please help... And i forgot to say that headphone jack work normaly and when i plug the headphones or external speakers in headphones jack the sound works but the clicking sound still comes out from built in speakers... Thanks in advance and sorry for my English, it is not my native language and there is no support forums on my native language witch is Serbian...

So i tried few more things like disable/enable sound card, driver reinstalation, bitrate changing and everything elese i could find here on forums or on the net (pretty much same stuff like here could be find on internet) and strange thing is that no one have same or similar problem like me... i just don't know anymore what to do...

Satellite L300 - Screen wont wake up and flickers

L300 screen went to sleep one day and wont wake up. Shut the lid then pop it open again it flicks the light on for about half a second then flicks off again.
I now have a secondary monitor hooked up and programmed to use that as primary. Everything else seems fine. Except the laptop screen wont stay lit. If I say turn off laptop screen, then say use it, it flicks on for half a second then off again.
So the light does work it just wont stay on.
When I first tried pulling out batteries and unplugging everything, I got it back. For about 15 minutes, then it started to flicker , then I lost it. Back to popping the lid for quick peeps then using guesswork and keying to navigate.
Now, it just pops on a light then is gone on startup.
a) Why did it start to flicker before it faded?
b) Why does it turn off as soon as it opens now when it obviously can work
c) I bought another flv card in case it wasnt getting power up there (didnt work)
This started happening just after I bought and installed a Utilities program, which I found was nibbling nay chomping vigorously at registry entries. So I dont know if this is software or hardware, or a file that isnt telling it not to turn off thats been corrupted.
Any ideas?

Hello
> I now have a secondary monitor hooked up and programmed to use that as primary. Everything else seems fine
This would mean the graphic card is ok and the problem is just the internal monitor.
In your case I would contact an authorized service provider because the guys can make an exact diagnostic and replace faulty hardware parts. You can find a list of them there:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
Dont understand me wrong but here its just an user to user forum and on this virtual way its not possible to fix any hardware problems or replace it. You need professional help.

Upgraded to Windows 7 and no sound from built-in monitor speakers

I've upgraded my HP Pavilion Media Center a1450n Desktop PC to Windows 7 successfully with the exception of sound. My speakers are built-in to my HP vs17e 17 inch LCD Monitor and Windows 7 cannot detect my built in speakers, I have downloaded most every sound driver out there currently is there something I'm missing? Can somebody help draw sound from my built-in monitor speakers on OS Windows 7?
Thank you.
This question was solved.
View Solution.

Downloading the realtek drivers on the website provided fixed the problem thank you!

What settings control the excessive 'p' and 'f' sounds from USB mic?

I'm recording a short intro to my Podcast and using a USB microphone. When playing it back, the 'puh' and 'fff' sounds when saying any word that has a 'p' or an 'f' in it are annoyingly exaggerated. I'm no sound engineer, so I don't know what settings I should be trying to change to make the recording sound normal.

Is the waveform clipping at these p's? Then it will be hard to get rid of them completely, because there is distortion. But you can try:
First of all, don't do it in GB, use an audio editor like Audacity or SoundStudio. (You could do it in GB, but audio editors are a lot more versatile). So export your GB track and open it in the audio editor. Find one of the p's (they're easy to see) and zoom in on it very closely. You'll see the wave that goes into the ceiling and is flattened at the top. Try to select just that p (between two zero points of the waveform). Bring down the volume of the selection so that it is about equal to the waves left and right of it.
The second characteristic of the plosives is that they have very strong basses. So open up an equalizer, preferably a graphic one, and bring the lower frequencies down (again, only on that little selection).
If you're lucky, your plop will hardly be audible after this operation.

User account control message displays every time, minimise and close buttons not displaying, pages slow to load

Every time I try to open a page, I get a user account control message asking for permission to proceed. I have tried to adjust the frequency of this but have been unsuccessful. This has only started to occur recently.
Pages are slow to load and do not properly display the close, minimise etc buttons in the top right corner (these are blacked out)
I have tried to reset firefox. This does not fix the problem.
The problem does not occur using Internet Explorer

There are several things to try.
Some problems occurs when your Internet security program was set to trust the
previous version of Firefox, but no longer recognizes your updated version as
trusted. Now how to fix the problem: To allow Firefox to connect to the Internet
again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet?esab=a&s=Configure+firewalls+&r=0&as=s Configure firewalls so that Firefox can access the Internet.]''' {web link}

FireFox 3.6.12 doesn't display an iFrame (an Amazon sales link) that displays in IE8, Chrome, and Safari. It displays iFrames of PDFs on the web site.

I support www.oaklandsymphonychorus.org, a site using DotNetNuke 4.9.5. I added an iFrame module to the site using the URL in this code:
<iframe src="http://rcm.amazon.com/e/cm?t=oaklsympchor-20&o=1&p=8&l=as1&asins=B002FQJT3Q&fc1=000000&IS2=1&lt1=_blank&m=amazon&lc1=0000FF&bc1=000000&bg1=FFFFFF&f=ifr" style="width:120px;height:240px;" scrolling="no" marginwidth="0" marginheight="0" frameborder="0"></iframe>
The iFrame displays in IE8, Chrome, and Safari, but not FireFox.

'''Solution:''' Add ''id'' and ''name'' attributes to the iframe-tag.
This problem is covered in this thread: http://forums.mozillazine.org/viewtopic.php?f=25&t=1942409

Target Display wont wake up from sleep

I have a 27" mid 2011 iMac as my main computer, and via thunderbolt, i have another 27" mid 2011 iMac connected on the other end of that thunderbolt cable.
Target Display Mode works fine, but when my main computer goes to sleep and is woken up, the Target Display doesn't wake up. I have to hit Cmd+F2 to exit, then Cmd+F2 again to renable.
Any ideas on how I can fix this?
Thank you so much

Still nothing Both computers are running 10.8.3

Hissing/static sound from both pulseaudio and ALSA

I hear a hissing sound whenever the volume is not muted. At first I thought it was a pulseaudio problem but I still hear it when not using pulseaudio

I think I found the problem but the solution is on a ubuntu ppa. the ppa is https://launchpad.net/~ubuntu-audio-dev … alsa-daily and the package is oem-audio-hda-daily-dkms I think that this is the solution as a user on the ubuntu forums were having the same issue with a similar motherboard http://ubuntuforums.org/showthread.php?t=2234198 . Can anyone help me?

Display wont wake up and static sound from display

Similar Messages

Maybe you are looking for