Display xMII Trends and graphs in SAP R/3

Dear all,
We have a requirement to see the trends of various production lines from xMII in SAP R/3 itself.
Is it possible to have this graph in SAP ?
Even if we are able to see the webpage then also it is ok.
We are having RFC connection established already within xMII and SAP.
Thanks in Advance,
Regards,
Vivek K

Found it :
http://www.erpgenie.com/abap/controls/htmlviewer.htm

Similar Messages

Bex Web Ad-hoc Analysis Template - Displaying both Data and Graph Tabs

Hello Everyone
I am asking this as I would not have belived this if I hadn't seen it for myself. I was showing somone a BW report using the standard Bex Ad-hoc analysis on the Web. They managed to display both the data analysis tab and the Graphical display tab on the same page, with the data at the top and the graph underneath. I could see that both of the tabs were highlighted at the top. It was great because as you manipulated the data in the navigation block, the graph changed at the same time.
I have looked in all my documentation and I have not found anything.
I have tried to replicate what this user did, but cannot. I have tried all the usual things like Shift control and alt, but it doesn't work.
Does anyone know how to do this, because the user loves it and I cannot explain to them how they must have done it!
Points will be awarded for the successful answer!!
Many thanks to you all
Gareth

Thanks Andrew
I am glad you understand what I mean, as I thought I was seeing things when I saw it!
I feel I am so close to the answer, but when I do the drop down on the Graphical display tab for "display as" it only gives me the options
Column Chart
Line Chart
Pie Chart
Bar Chart
Stacked Bar Chart
Do I need to do something else, or I am I in the wrong part of the report and I am running BW 3.5.
Thanks for your reply so far
Gareth

I am loging in SAP. Initial screen come where it display User Menu and Sap

Dear All,
When i am loging in SAP. Initial screen come where it display User Menu and Sap Menu, but User menu is in active not showing but T code are executing then what object i have missed.
can u help me?
Thanks,
Regards,
Sachin

Hi Sachin,
It doesn't care if you're using SAP_ALL or any of those profile. That is not relevant. I had that case a few days ago, I'm not using any of those profiles and I made it work with help of one post.
If you put the transactions in the tab "Menu" of the role in the PFCG, and if you activate parameters I mentioned in a prior post, then you should see the Menu.
Tables SSM_CUST and USERS_SSM. The first is global and the other is user-especific.
The link in one of the first post of this thread hace all the info.
That should work, that worked in my case.
What values the parameters have on those tables? The more the info the better.
Updating the parameters on those tables should help. If still doesn't work then you should check another parameter using transaction RZ10 or report RSPARAM.
If my info solves your problem, points are appreciated, if not, we will try...
Jose

I have some trouble With the graph XY, if I display a curve and try to zoom on it, it may be corrupted, or may disappeared.

In fact this happens on some computers. the graph XY causes some trouble when zooming. Sometimes, when I run my main program and open the window with the graph, it has change the displayed it overflows to the edge of the windows. Or somtimes it works but if I zoom the curves disappeared, or is corrupted.
I have this for instance on a computer with win 98 and a ATI graphic board. So I try to update all drivers but noting has changed. I try to decrease the hardware acceleration, and it seems to happen less oftenly.
Does anybody have seen that kind of trouble ?

> I have some trouble With the graph XY, if I display a curve and try to
> zoom on it, it may be corrupted, or may disappeared.
>
I think what you are describing is not due to video driver, but rather
to the way the graph works. The LV graph maps points to integer screen
coordinates and draws lines be tween those point. When the numbers are
way to large to fit on the screen, the numbers are pinned to a special
large value. When this happenson one axis but not the other, it causes
the slope of the line to change and potentially not cross the screen.
If this is the same effect I'm describing, it only takes place when you
zoom into the data by a large extent, pushing the other points about ten
to fifteen monitors away. At this point you are no longer
looking at
measured data, but rather just on the interpolation of a line between
two points. The solution if you must have one is to resample your data
on the diagram to contain more points.
Greg McKaskle

Can we have the text and value displayed in the BI Graph ?

Dear Experts,
We are able to see the graph for a particular report in switching to Graphical Display
:I have selected Pie chart and the value and text is displayed on mouse over on each section.
Please let meknow if there ia an option to display the text and value along with the graph.
Regards
Manu

Manu Govind wrote:
Dear Experts,
>
> We are able to see the graph for a particular report in switching to Graphical Display
>
> :I have selected Pie chart and the value and text is displayed on mouse over on each section.
>
> Please let meknow if there ia an option to display the text and value along with the graph.
>
>
>
> Regards
> Manu
Dear Govind,
You can use BEx based WAD tool to acheive it. Edit the chart in the chart properties dialog, goto settings & edit the property. As you have requested you created 2 tabs, one for chart, another for data, and as and when you do changes in the Analysis grid, the chart values get adjusted.
P.S. Humbly a personal opinion; I do not recommend WAD; use XCELCIUS instead.
Best Regards, @{

Call and display Xcelsius SWF file from an SAP Transaction

Hello Experts ,
Could you please suggest if it is possible to Call and display Xcelsius SWF file
from an SAP Transaction and if Yes how can this be achieved.
Regards ,
Jerin.

Jerin,
It is possible to embed a Xcelsius model into an SAP WebTemplate (Anil promised to write a blog about this very soon). After that you can include the WebTemplate in the GUI menu, Role menu or Portal.
Henk.

Can't get a dynamic data type and wire (waveform double) to both display on a waveform graph

Hi,
I'm teaching myself LabVIEW. I wish to delay a wave form and display it with the non delayed wave form. I used a delay from the examples. The output of the delay is wire (waveform double). The Simulate signal output is dynamic data. My conversion from wire (waveform double) to dynamic does not display on the waveform graph. The VI is attached. Can anyone offer any comment.
Solved!
Go to Solution.
Attachments:
Three input graph.vi ‏92 KB

It is displaying just fine. The display is hidden behind the display of the second signal. Expand the Plot Legend to show all three plots. Then toggle the plot visible property of the second and third plots.
Lynn

How to display Lines and Boxes in SAP Script

hi,
Can any one help me how to display Lines and Boxes in SAP Script.
Regards
kiran

The SAP printer drivers based on page-oriented printers use these commands when creating output whereas the line printers and non-supported page-oriented printers ignore these commands.
Syntax:/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
This command draws a box of the specified size at the specified position.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH determines the width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT determines height of the box.
Default: HEIGHT value of the SIZE command.
FRAME determines the thickness of frame.
Default: 0 (no frame).
INTENSITY determines the box contents as a grayscale percentage.
Default: 100 (full black)
The other details I guess is provided by friends who have posted before me.
Regards,
K.Sibi

How can I display the first and last name using a paramater as employee ID?

Hi SAP,
I have a parameter that is called {? Employee ID}. What I want to do is display the first and last name based on the employee ID value entered in {? Employee ID} in the page header of the report. Right now, when I put the following formula in the page header only some pages get the right result while other pages dont....
if table.employeeid = {? Employee ID} then
table.firstname" "table.lastname
It appears as though if the first record in the details section on the beginning of each page happens to be the employee under {? Employee ID} then it prints it correctly, if it isn't I get a null value in the page header.
Anyone have any ideas?
Z

Hi Try this,
Whileprintingrecords;
if ={?EmpID} then
Also check the option "Default values for null" in the formula editor.
Regards,
Vinay

Read from csv file and graph at certain interval

Hi,
I've been trying all day to modify a labView program so it reads in data from my csv file to graph temperatures from 4 ovens. The temperatures are logged in the csv file at 3s intervals and i wish to display them on 4 graphs. I've written a vi (or modified one i should say) to take in a temperature value from a numeric control. Im just having extreme difficulty with the reading part.
If someone can help me it would be greatly appreciated.
Best regards,
Dawn
Attachments:
Oven temps.csv ‏2 KB
Oven_level_meas.vi ‏58 KB

Hi there,
I have a similar problem here. I see your point that you should read the file at once but I don't seem to be able to manage it. Shouldn't you use some kind of
a buffer to achieve this? Let me tell you what I am trying to do: I have a csv file with several columns that I want to display in several waveform charts. Each column is a wavechart. I should be able to change the speed at which the data is displayed. I am able to do this because I change the wait until (ms) in the for loop. However the application is too slow. I think because I open the csv file in the for loop and display it while I am reading it. I have tried to put it outside the for loop but this doesn't work. I think I need some kind of a buffer in which the data is stored after reading it. And then this buffer should be used in the for loop. I have looked at the producer-consumer structure but I dont fully understand it as I am not that experienced with labview. Any help or changes to my VI would be appreciated. I have attached the VI and the file with meaningless data I am using for testing.
Thanks
Attachments:
read_data_file_dynamically.vi ‏39 KB
test.CSV ‏332 KB

How to create the Business System both sender and receiver in SAP XI / PI

Dear All
kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
Regards
Blue

Hi,
If by any chance you are not able to find these....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
Regds,
Pinangshuk.

Disabling Popularity Trends and Reindex library in Sharepoint 2013

Hi,
I need to disable "Popularity Trends" option for all items, lists and libraries in SharePoint 2013. Also i need to disable "Reindex library" options in SharePoint 2013 document library Advanced settings. If this is possible, can anyone
ellaborate the steps to achieve these two requirements?
Thanks in advance!!!

Hi Poornima,
According to your description, my understanding is that you want to disable ‘Popularity Trends’ and ‘Reindex document library’ and ’ Reindex List’buttons for all items in SharePoint 2013.
For disabling ‘Popularity Trends’, you need to deactivate Reporting feature at site collection level as Settings->Site Settings->Site collection features under Site Collection Administration->scroll to Reporting feature, deactivate
it.
For disabling ‘Reindex document library’ and ’ Reindex List’, you can add the following code at the front of
<SharePoint:ScriptBlock runat="server"> in advsetng.aspx
file, the file path is : C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\LAYOUTS.
The code is :
<style>
#ctl00_PlaceHolderMain_ReindexListSection
display:none;
</style>
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

ALV: how to display only subtotals and total rows in the output

ALV: how to display only subtotals and total rows in the output
i am getting output
i am getting subtotals for respective fields
but i want to display only subtotals and totals rows in the output
i have tried the
totals_only parameter in slis_layout_alv
but it is not working.

hi,
For TOTAL
For the amount field / quantity field in the field catalog give DO_SUM = 'X' for WHOLE total
For SUBTOTAL
For subtotal you will have to create an internal table sort..Let's say you want to do subtotal for each customer..
DATA: lt_sort type SLIS_T_SORTINFO_ALV,
ls_sort type slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'Give the field name that you do the sum'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
APPEND ls_sort TO lt_sort.
fieldcatalog-do_dum = 'X'.
for subtotals
WA_SORT-FIELDNAME = 'ERSDA'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOTAL = 'X'.
APPEND WA_SORT TO IT_SORT.
Refer
http://help.sap.com/saphelp_erp2004/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/doesnt-function-event-subtotal_text-in-alv-713787
regards,
Prabhu
reward if it is helpful

How to correct bad PDF display of Excel 2007 graph-Adobe Pro X?

Just installed Adobe Acrobat Pro X; previously had Adobe Pro 8, which worked fine. Have Excel 2007 files with an Excel graph and a JPG image on the spreadsheet tab. Both the graph and the JPG are too big, are displaced, and hide spreadsheet data, when the Excel file is Saved As a PDF using Adobe Pro dialog or Excel dialog, or the Excel Plug-In to Create PDF. For some strange reason, printing to PDF works, although that is limiting. All of the settings are the same for the Adobe Printer as Adobe Pro settings. Changing them or going to default did not help. Just did the latest update; that did not help.
The graph and JPG are too large for the PDF page. Paper printing from Excel still works fine. Producing a PDF on another machine with Pro 8 still works fine. Could not find this problem discussed anywhere. Using XP, fully patched. This should not be a complicated process, nor a complex spreadsheet. What is going on?
Thanks

Regardless of the method and Adobe product used to create the PDF, including the Excel tool button, the single common factor whether the PDF correctly displays a JPG or graph in the Excel file that is being done at anything other than 100% size is whether the Adobe Printer or a Physical Printer is selected as the default printer in the Windows Printers and Faxes-Settings. This is true even though the printer is not being used. I have created the same PDF using every method/product and the results are always the same, and only properly display when either the setting is 100% size or the system printer is selected as Adobe Printer. This is true only after installing Adobe X (8 was previously installed, and worked as expected).
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers - quickly, easily, and for free!
>>> "Bill@VT" <[email protected]> 4/7/2012 7:21 AM >>>
Re: How to correct bad PDF display of Excel 2007 graph-Adobe Pro X? created by Bill@VT ( http://forums.adobe.com/people/Bill%40VT ) in Creating, Editing & Exporting PDFs - View the full discussion ( http://forums.adobe.com/message/4319297#4319297 )
You say the settings for the printer work fine, but do not for PDF Maker (I am assuming this is what you meant). PDF Maker no longer uses the printer and the settings are independent. Check the settings for PDF Maker under the create PDF menu.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4319297#4319297
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4319297#4319297. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email ( mailto:discussions-community-acrobat-creating__editing_%[email protected] ) or at Adobe Forums ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

Convert xml to pdf and print on SAP printers

Hello All,
I've the following requirement:
PO layout (we are not using smartform or sapscript or adobe for printing. The PO template is an infopath file which generates XML and XSL) is in the form of XSL file and the PO data is in the form of XML (generated from ABAP itself). I merge this two files and apply call transformation to create a single XML file which has the layout information as well as the data.
Now the major challenge is to convert this XML file with the layout information and display it as a PDF in SAP GUI. Also, this PDF should be printable on SAP printers and not only local printers.
Asking you to help me as your time permits.
Regards
Aditya
Edited by: Thomas Zloch on Mar 10, 2011 9:25 AM - urgency reduced to normal

hii,
For xml file format.Goto this link.Click on print options link.
Click on statically,dynamically links.
http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b6d26211d4b646006094192fe3/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f6/6a65c1edf111d4b656006094192fe3/content.htm
regards,
Sridhar.V

Display xMII Trends and graphs in SAP R/3

Similar Messages

Maybe you are looking for