Display yellow-lined pattern

A few days ago a yellow vertical lined pattern appeared & covers my entire display. I can highlight areas of it & lighten them, but can't get them to disappear. I tried different color settings, display settings, and resetting the PRAM but nothing has worked.
Has anyone had this problem or know how to fix it?
Thanks!

I have a similar problem, although the yellow doesn't cover the entire screen. There is a vertical band about 4 inches wide that consistently shows up on "some" windows. Most often it shows up on the tops of windows, but also adds some blue distortion to photos, but not HTML or word docs. The yellow band overlays a blue band that is wider and often "ghosts" the edges of safari/finder windows.
When i took a screen shot of the problem, it did not show up.
Resetting the PRAM doesn't help.
Is there any other trouble shooting I should do before I schedule a "genius" bar appt.
thanks in advance
patrick flynn
brooklyn ny

Similar Messages

Displays showing a yellow checkerboard pattern.

2010 Mac Mini, 10.7.3, dual DVI displays. - Several times a day, it shows a yellow checkerboard pattern in some windows. So far, it's appeared in Chrome, Entourage and Excel 2008. The problem occurred both before an after we upgraded the RAM. These checks appear sometimes when scrolling, sometimes while waiting for a web page to load. They go away generally with the same actions... clicking, scrolling, etc.
We have lots of other users, none of them complain of this problem.
Photo attached:
Anyone have any thoughts?

Is this a Mini with Intel Integrated Graphics, or a real Graphic card?
If the former it could easily be the RAM, if the later...
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/

Why do I get a lined pattern when casting shadows with a Point light?

Hello,
For some reason I am getting a weird lined pattern on my composition. It only happens when using a Point light with Cast Shadows on (see image below.) It's almost a wood effect and not one I particularly want. I have found that altering the shadow map resolution only seems to change the pattern of the lines, but apart from that I have no idea how to get rid of it!
Cheers
Kristian

Hi Coconutzor1,
It only has a Position and Orientation effect on it, with material options (cast shadows: on, light transmition: 50%, accepts shadows: on, accept lights: off). It is also a 3d layer, if that matters. It sits in a Composition that has collapse transformation on, with a camera, a null object to control the camera and a point light with cast shadows on... I only ever see the weird lines when the cast shadows on... so I guess it must be something to do with that?

My screen just locked up and displayed the following pattern. Any ideas why?

Hello,
My computer went to sleep and when I awoke it and opened up safari browser, the screen locked up and displayed the attached pattern on my screen. I could still use the mouse but couldn't click on anything. I had to reboot.
Any ideas what could be wrong?

If it will repeat after restart - hardware problems. Most probably memory.
Anyway run Apple Hardware Test

Ti4200 VTD8x Yellow Line Pattern.

Well In every game I've played, there has been a yellow line pattern that spreads vertically across the screen. I've installed the latest drivers for the video card and Direct x9 but this hasn't resolved the problem. Is my video card busted?

Im thinkin it might have something to do with OpenGL. In Star Wars Jedi Outkast, there is an option to disable the OpenGL and when I do that, the yellow lines disappear. any suggestions?

Display and Edit Patterns in XML Tags

Using LiveCycle E2 V9.
The display and or Edit Patterns are not reflected in the XML of a submitted form.
While these display properly on the Adobe form on-screen, e.g.
$150,000.00 when the fields are are submitted the XML tag as reflects 150000.000000
Please advise whether there is something that I am doing incorrectly and or a fix for this?
Thank you!

Formatted displays for numbers is never the same as the actual field value. This approach allows a user to see a formatted numeric value but the data remains as a number in floating point, integer, or binary value for further calculations as a number. If this were to change, then one would need to parse the numeric value as a character string back to a numeric value before performing any calculation.
There are specific forums for LiveCycle Designer.

Display yellow warning message in Web ADI

Hello, I was wondering if there was a way to return a warning message back to a WebADI. I thought I had seen it a seeded ADI but I'm not sure.
So what I'm looking for is for a record to post to the database but return a Message back to the excel form and display a Yellow smiley face (instead of the green success face or the red error face). The functionality requested by the business is that we run a sum on a column before inserting records and if they break a certain threshold to still post the records but return a warning message saying the threshold was broken.
Please let me know if this is possible.
Thanks,
Ryan

Does anyone have any ideas on how to do this? If it can't be done, please let me know.
Thanks!

Xperia Z3 display yellow tint at bottom

Hallo to Z3 community! I noticed a yellow tint at the bottom of my screen (little difficult to notice, but it exists). The problem appears when you put the brightness at full with white background (into the display test at service menu). Is it common issue? Do you have it? Although it' s hard to notice it, i don' t want this problem and i must send it for service if i 'm the only one "lucky" with this issue and it is not normal for this screen.. Thank you in advance and sorry for the bad english!

Hello,
I too have the same problem with my Xperia Z3, yellow glow under the soft keys (home / back / task), the halo is very noticeable with white image full screen, when the soft key disappears. with the video we see very little, with black soft key not known anything. I have lollipop 5.0.2. what do you recommend?

VIbe x2 display yellow

Hi, I have Lenovo Vibe X2 5 months. I have yellow stains on the display around buttons and in SIM card area. They are more intesive, when phone is more warm. When phone is cold, it is more invisible. Did you seen it ever ?

my lenovo vibe x2 go to servis...

Ideas to create a method to display a number pattern

Hey, I need to write a program to display a pattern like...
1
2 1
3 2 1
for any input value of n.
I have to create two methods, one will be the main and the other the DisplayPattern...........

Redle-YeYe wrote:
Hey, I need to write a program ....much luck with your endeavor!

Tables icon displaying yellow in BMM layer.

Hi all,
When i was tring to drag drop tables from physical layer to BMM layer it's showing yellow icons.....
Scenario is as follows:
tables: EMP, DEPT, BONUS, SALGRADE.
I have created complex join in Physical layer between EMP and SALGRADE (condition is "EMP$".SAL BETWEEN "SALGRADE$".LOSAL AND "SALGRADE$".HISAL). Samething i have taken into BMM layer. 4 table icons showing yellow and checked for consistency..giving errors like there is no join of logical tables.
i have created join Physical layer will it not carry to BMM layer? Do i need to create same complex join in BMM layer? After creating the complex in BMM layer will those errors come again??
Please aswer to my questions..asap.
regards
ck

Chandra kanth wrote:
Gurus,
The other two tables (DEPT, BONUS) are not required to join but i just kept it like that in BMM layer.
1. I have created complex join between EMP and SALGRADE in physical layer and i also manually created complex join in BMM layer....it did not come when i drag drop the schema from physical to BMM layer. Do we require to create manually again the complex join in BMM layer?Yes.
>
2. After creating complex join in BMM layer EMP table icon shows white others are yellow. Will complex join not suffice to make error free (Consistent) in BMM layer?
Is it require to join all tables (to maintain a star schema)?
You need to create complex joins to create a star schema in BMM layer. This is needed to create an error free BMM layer.
3. As per the requirement i dont require to join other two tables (DEPT, BONUS).
What is the purpose of these tables?
>
Please advice if i am wrong in the above cases....and also please answer to all my questions.
Thanks in advance
chandra kanth.

Display yellow at an angle.

Is this normal i've never seen another g4 or in person and the seller insists all of them are like this... but i know the g5s are not so is this normal?

I have an imac and am sorry to tell you that your seller was lying. Is the display only like that at a certain angle? I have tried all angles and have never had this fault.

Stuck with grey display and strange pattern!

My iMac froze a few days ago, so I used the power button to turn it off. Then I restarted the computer but I had a greyish monitor with the apple logo, and they were filled with little suigly lines. (see photos)
Then the screen gets a strange pattern on the left side
and after a while I get the text box telling me to restart.
But each time I retart I get the same thing, so impossible to open the computer
to get access to Terminal or Activity Monitor to try and change things.
Any suggestions?

See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Display resultset in pattern

Hello,
I have data stored in the database like this in two columns FROM_URL and TO_URL
FROM_URL ---- TO_URL
start ---- a.html
a.html ---- b.html
b.html ---- c.html
start ---- k.html
k.html ---- h.html
h.html ---- f.html
f.html ---- t.html
start ---- k.html
k.html ---- l.html
So I want to display it like
1) start -> a.html -> b.html -> c.html
2) start -> k.html -> h.html -> h.html -> f.html -> t.html
3) start -> k.html -> l.html
I have got an idea here. But this code executes the query only once. If I can write a condition which can loop the output in such a way that if
FROM_URL="START"
it starts a new count.
here is my code.
try {
Statement stmt = conn.createStatement( );
String query = "select FROM_URl, TO_URL from LOG ORDER BY TIME ASC";
ResultSet rset = stmt.executeQuery( query );
rset.next( );
System.out.print ( "<ol><li>" );
System.out.print ( "Start" );
while(rset.getString(1) == "START")
do{
//System.out.print ( "START");
System.out.print ( " → " + rset.getString( 2 ) + "<br>");
}while(rset.getString(1) != "START");
System.out.print ( "</li></ol>" );
System.out.println( );
stmt.close( );
rset.close( );
catch( SQLException ex ) {
System.out.println( ex );
Thanks in advance.

Hi Nagarajan,
The code:
try{
               InitialContext ctx = new InitialContext();
               DataSource ds = (DataSource)ctx.lookup("jdbc/MyAlias");
               Connection con = ds.getConnection();
               Statement sm = con.createStatement();
               ResultSet rs = sm.executeQuery("SELECT * FROM TABLE");
               while(rs.next())
                    IPrivateFlightInfoComponentView.IFlightContentElement element = wdContext.nodeFlightContent().createFlightContentElement();
                    String result = rs.getString("COL1");
                    element.setFlightValues(result);
                    wdContext.nodeFlightContent().addElement(element);
                    IPrivateFlightInfoComponentView.IFlightContentElement ele2 = wdContext.nodeFlightContent().createFlightContentElement();
                    String result2 = rs.getString("COL2");
                    ele2.setFrom(result2);
                    wdContext.nodeFlightContent().addElement(ele2);
                    wdContext.nodeFlightContent().moveNext();
               wdContext.nodeFlightContent().moveFirst();
     catch(Exception e){
          wdComponentAPI.getMessageManager().raiseException(e.getMessage(),true);
(changed to True in RaiseException)
I had to make new element aswell, else error.
Hi Maksim Rashchynski,
It has to be possible to display all columns in table in to a UITable, without rewriting query? Or am I wrong?
Regards,
Simon
PS: thanks for all your help.

Macbook Pro displays a diagonally patterned screen

My MacBook Pro will begin to boot when the screen suddenly becomes distorted by an alternately patterned gray screen. I have performed 2 safeboots and after them, it seems to work fine for just a few (3,4) boots after that. One time when it booted successfully, the screen's background light began to flash very quickly until the screen was distorted again like in the beginning.
I've tried cleaning the PRAM and the NVRAM also but it did not fix the problem.
Can somebody help with this? Does anyone know what's causing the problem? Does anyone know how to fix it?
By-the-way, it won't even turn on right now. :-|

Looks like graphics chipset problem. Please take it the Apple store and see what can they do for you.
Best.

Display yellow-lined pattern

Similar Messages

Maybe you are looking for