Displaying 3 blocks in a report

hi
   please tell me how can i display  3 blocks in a report by using reuse_alv_list_display.
thanks & regards
sekhar rao

Hi Sekhar ,
You can use Functin module 'REUSE_ALV_BLOCK_LIST_DISPLAY".
With the help of these you can display more than one block at a time...
Hope this helps you..
Thanx,
Navin...!

Similar Messages

  • Displaying logo in alv report

    hi,
    what are the minimum requirements to display logo in alv report at the top of the page.
    i searched forums but did n't get the required answer.

    Hi
    This code is to display logo in the report through alv grid
    *& Report  ZALVDEMO                                                    *
    REPORT  ZALVDEMO.
    TABLES : J_1IEXCHDR, " header table
    J_1IEXCDTL, " item table
    J_1IPART2, " Excise Part II details
    LFA1, " vendor master table
    J_1IMOVEND, " vendor excise details table
    MSEG, " Document Segment: Material
    MKPF, " Header: Material Document
    DD07T, " domain text table
    T001W. " Plant and Branch Details
    DATA : BEGIN OF IT_CHDR OCCURS 100,
    DOCNO LIKE J_1IEXCHDR-DOCNO,
    DOCYR LIKE J_1IEXCHDR-DOCYR,
    EXNUM LIKE J_1IEXCHDR-EXNUM,
    EXDAT LIKE J_1IEXCHDR-EXDAT,
    WERKS LIKE J_1IEXCHDR-WERKS,
    EXBED LIKE J_1IEXCHDR-EXBED,
    EXCCD LIKE J_1IEXCHDR-EXCCD,
    ECS LIKE J_1IEXCHDR-ECS,
    END OF IT_CHDR.
    DATA : BEGIN OF IT_CDTL OCCURS 100,
    DOCYR LIKE J_1IEXCDTL-DOCYR,
    DOCNO LIKE J_1IEXCDTL-DOCNO,
    EXNUM LIKE J_1IEXCDTL-EXNUM,
    EXDAT LIKE J_1IEXCDTL-EXDAT,
    LIFNR LIKE J_1IEXCDTL-LIFNR,
    MATNR LIKE J_1IEXCDTL-MATNR,
    MAKTX LIKE J_1IEXCDTL-MAKTX,
    CHAPID LIKE J_1IEXCDTL-CHAPID,
    EXBAS LIKE J_1IEXCDTL-EXBAS,
    EXBED LIKE J_1IEXCDTL-EXBED,
    ECS LIKE J_1IEXCDTL-ECS,
    MENGE LIKE J_1IEXCDTL-MENGE,
    MEINS LIKE J_1IEXCDTL-MEINS,
    RDOC2 LIKE J_1IEXCDTL-RDOC2,
    END OF IT_CDTL.
    DATA TEXT(10).
    DATA : BEGIN OF IT_OUT OCCURS 0,
    SERIALNO LIKE J_1IPART2-SERIALNO,
    TEXT1 LIKE TEXT,
    EXNUM LIKE J_1IEXCDTL-EXNUM,
    EXDAT LIKE J_1IEXCDTL-EXDAT,
    NAME LIKE LFA1-NAME1,
    DDTEXT LIKE DD07T-DDTEXT,
    EXCCD LIKE J_1IEXCHDR-EXCCD,
    BUDAT LIKE MKPF-BUDAT,
    EXBAS LIKE IT_CDTL-EXBAS,
    EXBED LIKE IT_CDTL-EXBED,
    ECS LIKE IT_CDTL-ECS,
    MATNR LIKE IT_CDTL-MATNR,
    MAKTX LIKE IT_CDTL-MAKTX,
    CHAPID LIKE IT_CDTL-CHAPID,
    MENGE LIKE IT_CDTL-MENGE,
    MEINS LIKE IT_CDTL-MEINS,
    DEL_IND(1),
    END OF IT_OUT.
    DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
    DATA S_NO(4) .
    DATA DB_CNT LIKE SY-TABIX.
    DATA EBELN_T LIKE MSEG-EBELN .
    TYPE-POOLS : SLIS.
    DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
    DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
    FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
    LS_FTCAT TYPE LVC_S_FCAT,
    SORTCAT TYPE SLIS_T_SORTINFO_ALV,
    SORTCAT_LN LIKE LINE OF SORTCAT,
    G_REPID LIKE SY-REPID,
    G_BACK_GROUND(70), "like bapibds01-objkey,
    GS_VARIANT LIKE DISVARIANT,
    G_SAVE ,
    GT_EVENTS TYPE SLIS_T_EVENT,
    ALV_EVENT TYPE SLIS_ALV_EVENT,
    EVENTCAT TYPE SLIS_T_EVENT,
    EVENTCAT_LN LIKE LINE OF EVENTCAT,
    LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
    LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
    CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
    'TOP_OF_PAGE',
    GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
    'USER_COMMAND',
    GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
    'BEFORE_OUTPUT'.
    ALV_EVENT TYPE SLIS_ALV_EVENT,
    DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
    DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
    SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
    PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
    SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
    PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
    R2 RADIOBUTTON GROUP GRP.
    SELECTION-SCREEN END OF BLOCK B.
    INITIALIZATION.
    G_REPID = SY-REPID.
    G_SAVE = 'A'.
    PERFORM BUILD_EVENT USING GT_EVENTS[].
    PERFORM ALV_EVENT_INIT.
    AT SELECTION-SCREEN.
    REFRESH LIST_HEADER.
    PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
    START-OF-SELECTION.
    PERFORM ALV_EVENT_INIT.
    G_REPID = SY-REPID.
    G_BACK_GROUND = ' ' .
    IF R1 = 'X'.
    CLEAR R2. CLEAR : REGTYP_1.
    REGTYP_1 = 'A'.
    set titlebar 'BALAJI' with DB_CNT.
    ELSEIF R2 = 'X'.
    CLEAR R1.CLEAR : REGTYP_1.
    REGTYP_1 = 'C'.
    set titlebar 'BALAJI1' with DB_CNT.
    ENDIF.
    SELECT * FROM J_1IPART2
    INTO CORRESPONDING FIELDS OF TABLE IT_PART2
    WHERE REGTYP = REGTYP_1 AND
    TRNTYP = 'GRPO' AND
    BUDAT IN BUDAT.
    DOCYR = IT_CDTL-DOCYR AND
    DOCNO = IT_CDTL-DOCNO.
    LOOP AT IT_PART2.
    SELECT SINGLE * FROM J_1IEXCHDR
    INTO CORRESPONDING FIELDS OF IT_CHDR
    WHERE TRNTYP = 'GRPO' AND
    DOCYR = IT_PART2-DOCYR AND
    DOCNO = IT_PART2-DOCNO AND
    WERKS = WERKS AND
    exdat IN BUDAT.
    ORDER BY EXDAT.
    IF SY-SUBRC = 0.
    APPEND IT_CHDR.
    ELSE.
    CONTINUE.
    ENDIF.
    IF SY-SUBRC <> 0.
    MESSAGE E084.
    ENDIF.
    ENDLOOP.
    LOOP AT IT_CHDR.
    SELECT * FROM J_1IEXCDTL
    INTO CORRESPONDING FIELDS OF IT_CDTL
    FOR ALL ENTRIES IN IT_CHDR
    WHERE
    TRNTYP = 'GRPO' AND
    DOCNO = IT_CHDR-DOCNO AND
    DOCYR = IT_CHDR-DOCYR AND
    EXNUM = IT_CHDR-EXNUM AND
    EXDAT = IT_CHDR-EXDAT AND
    WERKS = IT_CHDR-WERKS.
    IF SY-SUBRC = 0.
    APPEND IT_CDTL.
    ELSE.
    CONTINUE.
    ENDIF.
    ENDSELECT.
    ENDLOOP.
    LOOP AT IT_CDTL.
    CLEAR TEXT.
    DB_CNT = DB_CNT + 1.
    READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
    READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
    IT_OUT-SERIALNO = IT_PART2-SERIALNO.
    SELECT SINGLE NAME1 FROM LFA1
    INTO IT_OUT-NAME
    WHERE LIFNR = IT_CDTL-LIFNR.
    SELECT SINGLE * FROM LFA1
    WHERE LIFNR = IT_CDTL-LIFNR.
    IF LFA1-LAND1 EQ 'IN'.
    TEXT = 'INVOICE'.
    IT_OUT-TEXT1 = TEXT.
    ELSE.
    TEXT = 'BOE'.
    IT_OUT-TEXT1 = TEXT.
    ENDIF.
    SELECT SINGLE * FROM J_1IMOVEND
    WHERE LIFNR = IT_CDTL-LIFNR.
    SELECT SINGLE * FROM DD07T
    INTO IT_OUT-DDTEXT
    WHERE DOMNAME = 'J_1IVTYP' AND
    DDLANGUAGE = 'EN' AND
    DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
    IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
    OR
    DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
    DD07T-DDTEXT = 'Dealer'.
    ENDIF.
    IT_OUT-DDTEXT = DD07T-DDTEXT.
    ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
    *goods'.
    DD07T-DDTEXT =
    CLEAR EBELN_T.
    SELECT SINGLE LFBNR FROM MSEG
    INTO EBELN_T
    WHERE MBLNR = IT_CDTL-RDOC2 .
    SELECT SINGLE * FROM MSEG
    WHERE BWART = '106' AND
    LFBNR = EBELN_T ."and
    ebeln = ebeln_t.
    IF SY-SUBRC = 0.
    IT_OUT-DEL_IND = 'X'.
    ELSE.
    IT_OUT-DEL_IND = ' '.
    ENDIF.
    SELECT SINGLE BUDAT FROM MKPF
    INTO IT_OUT-BUDAT
    WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
    IT_OUT-EXNUM = IT_CDTL-EXNUM.
    IT_OUT-EXDAT = IT_CDTL-EXDAT.
    IT_OUT-EXCCD = IT_CHDR-EXCCD.
    IT_OUT-EXBAS = IT_CDTL-EXBAS.
    IT_OUT-EXBED = IT_CDTL-EXBED.
    IT_OUT-ECS = IT_CDTL-ECS.
    IT_OUT-MATNR = IT_CDTL-MATNR.
    IT_OUT-MAKTX = IT_CDTL-MAKTX.
    IT_OUT-CHAPID = IT_CDTL-CHAPID.
    IT_OUT-MENGE = IT_CDTL-MENGE.
    IT_OUT-MEINS = IT_CDTL-MEINS.
    APPEND IT_OUT.
    EX_NO = IT_CDTL-EXNUM.
    ENDLOOP.
    Title Portion
    IF REGTYP_1 = 'A'.
    SET TITLEBAR 'BALAJI' WITH DB_CNT.
    ELSEIF REGTYP_1 = 'C'.
    SET TITLEBAR 'BALAJI1' WITH DB_CNT.
    ENDIF.
    AFIELD-COL_POS = 1.
    AFIELD-FIELDNAME = 'SERIALNO'.
    AFIELD-SELTEXT_L = 'INPUTS'.
    AFIELD-JUST = 'L'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 2.
    AFIELD-FIELDNAME = 'TEXT1'.
    AFIELD-SELTEXT_L = 'TYPE OF DOC'.
    AFIELD-JUST = 'L'.
    AFIELD-DECIMALS_OUT = '0'.
    AFIELD-NO_ZERO = 'X'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 3.
    AFIELD-FIELDNAME = 'EXNUM'.
    AFIELD-SELTEXT_L = 'DOC.NO'.
    AFIELD-JUST = 'L'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 4.
    AFIELD-FIELDNAME = 'EXDAT'.
    AFIELD-SELTEXT_L = 'DOC.DATE'.
    AFIELD-JUST = 'C'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 5.
    AFIELD-FIELDNAME = 'NAME'.
    AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
    AFIELD-NO_ZERO = 'X'.
    AFIELD-JUST = 'L'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 6.
    AFIELD-FIELDNAME = 'DDTEXT'.
    AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
    AFIELD-JUST = 'L'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 7.
    AFIELD-FIELDNAME = 'EXCCD'.
    AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
    AFIELD-NO_ZERO = 'X'.
    AFIELD-JUST = 'L'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 8.
    AFIELD-FIELDNAME = 'BUDAT'.
    AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
    AFIELD-JUST = 'C'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 9.
    AFIELD-FIELDNAME = 'EXBAS'.
    AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
    AFIELD-DO_SUM = 'X'.
    AFIELD-JUST = 'R'.
    AFIELD-DECIMALS_OUT = '2'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 10.
    AFIELD-FIELDNAME = 'EXBED'.
    AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
    AFIELD-JUST = 'R'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 11.
    AFIELD-FIELDNAME = 'ECS'.
    AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
    AFIELD-JUST = 'R'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 12.
    AFIELD-FIELDNAME = 'MATNR'.
    AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
    AFIELD-JUST = 'L'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 13.
    AFIELD-FIELDNAME = 'MAKTX'.
    AFIELD-SELTEXT_L = 'DESCRIPTION'.
    AFIELD-JUST = 'L'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 14.
    AFIELD-FIELDNAME = 'CHAPID'.
    AFIELD-SELTEXT_L = 'TARIFF-ID'.
    AFIELD-JUST = 'L'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 15.
    AFIELD-FIELDNAME = 'MENGE'.
    AFIELD-SELTEXT_L = 'QUANTITY'.
    AFIELD-JUST = 'R'.
    AFIELD-DO_SUM = ' '.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 16.
    AFIELD-FIELDNAME = 'MEINS'.
    AFIELD-SELTEXT_L = 'UOM'.
    AFIELD-JUST = 'C'.
    APPEND AFIELD TO FIELDCAT.
    AFIELD-COL_POS = 17.
    AFIELD-FIELDNAME = 'DEL_IND'.
    AFIELD-SELTEXT_L = 'Deleted'.
    AFIELD-JUST = 'C'.
    APPEND AFIELD TO FIELDCAT.
    * LAYOUT FOR ZEBRA CATLOG
    LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
    LAYOUT_IN-ZEBRA = 'X'.
    LAYOUT_IN-GET_SELINFOS = 'X'.
    LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
    LAYOUT_IN-DETAIL_POPUP = 'X' .
    SORTCAT-decimals = '0'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = G_REPID
    I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
    I_SAVE = G_SAVE
    IS_VARIANT = GS_VARIANT
    IT_FIELDCAT = FIELDCAT
    IT_SORT = SORTCAT
    IS_LAYOUT = LAYOUT_IN
    IT_EVENTS = EVENTCAT
    I_BACKGROUND_ID = g_back_ground
    TABLES
    T_OUTTAB = IT_OUT.
    *& Form TOP_OF_PAGE_LIST_HEADER
    text
    -->LIST_HEADERtext
    FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
    DATA : HLINE TYPE SLIS_LISTHEADER,
    TEXT(60) TYPE C.
    CLEAR : HLINE,TEXT.
    HLINE-TYP = 'H'.
    WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
    HLINE-INFO = TEXT.
    APPEND HLINE TO LIST_HEADER.
    SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
    CLEAR : HLINE,TEXT.
    HLINE-TYP = 'H'.
    WRITE 'PLANT :' TO TEXT.
    WRITE WERKS TO TEXT+8.
    HLINE-INFO = TEXT.
    APPEND HLINE TO LIST_HEADER.
    CLEAR : HLINE,TEXT.
    HLINE-TYP = 'H'.
    WRITE T001W-NAME1 TO TEXT.
    HLINE-INFO = TEXT.
    APPEND HLINE TO LIST_HEADER.
    CLEAR : HLINE,TEXT.
    HLINE-TYP = 'H'.
    WRITE T001W-STRAS TO TEXT.
    HLINE-INFO = TEXT.
    APPEND HLINE TO LIST_HEADER.
    CLEAR : HLINE,TEXT.
    HLINE-TYP = 'H'.
    WRITE T001W-ORT01 TO TEXT.
    HLINE-INFO = TEXT.
    APPEND HLINE TO LIST_HEADER.
    CLEAR : HLINE,TEXT.
    HLINE-TYP = 'H'.
    WRITE 'DATE :' TO TEXT.
    WRITE BUDAT-LOW TO TEXT+7.
    IF BUDAT-HIGH NE ''.
    WRITE 'TO' TO TEXT+18.
    WRITE BUDAT-HIGH TO TEXT+22.
    ENDIF.
    HLINE-INFO = TEXT.
    APPEND HLINE TO LIST_HEADER.
    ENDFORM. "TOP_OF_PAGE_LIST_HEADER
    *& Form ALV_EVENT_INIT
    text
    FORM ALV_EVENT_INIT .
    CLEAR ALV_EVENT.
    ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
    ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
    APPEND ALV_EVENT TO EVENTCAT.
    CLEAR ALV_EVENT.
    ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
    ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
    APPEND ALV_EVENT TO EVENTCAT.
    CLEAR ALV_EVENT.
    ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
    ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
    APPEND ALV_EVENT TO GT_EVENTS.
    CLEAR ALV_EVENT.
    ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
    ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
    APPEND ALV_EVENT TO GT_EVENTS.
    ENDFORM. "ALV_EVENT_INIT
    *& Form ALV_TOP_OF_PAGE
    text
    FORM ALV_TOP_OF_PAGE.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    IT_LIST_COMMENTARY = LIST_HEADER
    I_LOGO = 'ENJOYSAP_LOGO'.
    ENDFORM. "ALV_TOP_OF_PAGE
    *& Form BUILD_EVENT
    text
    -->P_GT_EVENTS[] text
    FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
    I_LIST_TYPE = 0
    IMPORTING
    ET_EVENTS = P_EVENTS
    EXCEPTIONS
    LIST_TYPE_WRONG = 1
    OTHERS = 2.
    READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
    ALV_EVENT.
    IF SY-SUBRC = 0.
    MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
    APPEND ALV_EVENT TO P_EVENTS.
    ENDIF.
    READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
    ALV_EVENT.
    IF SY-SUBRC = 0.
    MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
    APPEND ALV_EVENT TO P_EVENTS.
    ENDIF.
    ENDFORM. " BUILD_EVENT
    this wud help u

  • Block Planning Display block options eg Percent of block utilised and Qtys?

    Any hints how to display block quantities and percent utilised in PPDS area?
    I have managed so far to get the following for blocks that cross between months.
    1. Resource table. (/SAPAPO/RPT - Resource Planning Table )Can highlight both columns that the specific block is in, click "show operations", get the operations to show in the bottome screen, and the FILTER on the specfic dates to get the block quantities.
    This works to get a block quantity but would need to do a slow manual process for every block!
    2. Receipts View (/SAPAPO/RRP4). Can set up a visualisation profile which shows my characteristic in a column in the report, and then I can select a SINGLE resource from the front selection and get a listing of the quantities from that single resource, and then with filters on dates and/or characteristic, I can get the quantities.
    But this is slow and manual per resource.
    3. Detailed scheduling board shows VISUALLY whether blocks look full or not, but I cant find any way of getting any block quantities or percent complete from this view.
    Ideally, I want a way I can download all resource quantities and block quantities and then determine percent utilized in the blocks and put alerts on this to show which blocks are under-utilised.
    Any ideas????

    Aha. Found it.
    in the DS Planning board.
    click an order on block and then EDIT/SELECT/ALL FOR SAME BLOCK
    then
    EXTRAS / EVALUATION / EXTENDED OPERATIONS LIST - this gives all the quantities for selected block
    then
    EXTRAS / EVALUATION / RESOURCE UTILIZATION - select blocks and get percent utilisation for blocks

  • FM to display Selection screen on report output??

    Hi Experts,
    Is there an FM to display Selection screen on report output.
    Thanks In Advance.

    Hi Ashwin,
    Refer to below link
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/755b94ca5911d299af5c9604c10e27/content.htm
    or
    The easiest way is to define your selection screen in the TOP include of your module pool.
    Then call the selection screen.
    Selection Screen
    selection-screen begin of screen 1010 as window title text-001.
    selection-screen begin of block b1 with frame title text-002.
    parameters: p_vornr type resb-vornr,
    p_refno(20) type c,
    p_plnid type zplcfg-plnid as listbox visible length 20,
    p_sorts type c as listbox visible length 20.
    selection-screen begin of line.
    selection-screen comment (20) text-004.
    selection-screen position 33.
    parameters: p_order as checkbox default 'X'.
    selection-screen end of line.
    selection-screen end of block b1.
    selection-screen end of screen 1010.
    Now call the selection screen.
    call selection-screen 1010.
    if sy-subrc = 0.
    perform get_production_orders.
    perform process_orders.
    endif.
    Thanks!!

  • Flash video causes my Mac mini to crash displaying blocks of stripes

    As you can see from the picture below, flash video sometimes (often though) causes my Mac mini with Intel Graphics HD 3000 crashes while displaying blocks of stripes and repeating "tick" noise. I believe it just plays audio data in a buffer repeatedly at that moment.
    It looks to me that it failed in decoding the video. Probably it can be due to mal-formated encoding, but after rebooting if I move the play position to the same spot, it plays there correctly. So, probably somehow when there is somewhat wrong encoded data filled in a buffer to decode but there is some non-allowed operation is processed. ( like divide-by-zero. I don't mean that this one is due to divide-by-zero. ) Can be somewhat related to DCT block....
    Flash plugin installed on my Mac : The latest Flash plugins for Mac
    Mac Mini with Intel HD graphics 3000. ( last year's model )
    is this going to be fixed soon? Probably this is a bug which is already being traced?

    I haven't seen this occur before.  We're going to need some additional info from you.  Please see this tech doc for some simple troubleshooting steps (in particular, try the HTML5 vs. Flash video tests and try disabling Flash Player's hardware acceleration).  The doc also explains what information we'll need and how you can report the issue to us.
    Troubleshoot, report Flash Player video playback issues
    Thanks,
    Chris

  • How to set the number of rows displayed in a classical report at runtime?

    Hi,
    Our customer has several standard client hardware configuration and would like to enable end users to choose their 'display profile' at login time. This 'display profile' would contain predefined values for these hardware configurations and supposed to set various paramters that should define the number of rows displayed in a classical report region.
    I tried to provide parameters on the report region but it refused to accept anything but numerical values. Is it possible to do this?
    Regards, Tamas

    The link is to the closest linkable point in the documentation to the description of the Number of Rows (Item) attribute.
    It sounds like you have been trying to enter&mdash;unsuccessfully&mdash;an item name or substitution string into the Number of Rows attribute. The Number of Rows (Item) attribute is the one that actually allows you to do this. Click on the flashlight icon beside it to get a list of items from the application.

  • Display Comments in Webi Report

    Hi All,
    We have a requirement, to display comments (2 or 3 paragraph in each page of report).The text needs to preserve the format (bold, bullets and colored text) i.e the format from the source data should be retained when displayed in the webi report.
    Say for example the source is the excel and the text is coloured red or green , some part of the text is bold, all these formats should be preserved in the webi report also.
    Can you please suggest, how to implemet this in webi report?
    Thanks,
    Sudha

    you can take the formatted text in a word document, take a screen shot, put it in mspaint and select the required part. now place this picture in the blank cell's background image. this will preserve the formats of all kinds.
    but u cant change the text dynamically.
    usually we do this to give users an introduction page(tab1 in report followed by report tabs.) describing the application.
    Thanks,
    karthik

  • Display issue in Bex Report

    Hi all,
    I have a requirment in my report where in i would not like to display the -ve values as negative in the columns. I do not have the option to use NODIM() at the query level, because i am simultaneously switching between the column displaying actual values as well as being input ready. How can we eliminate the -ve sign from the values being displayed, so that the report display just the absolute numbers.
    Kindly help.

    Hey
    Create Calculate KeyFigure where (YOURKF<0)(YORKF*-1)+(YOURKF>0)(YORKF).
    I think in this way your will get absolute value
    Aharon

  • Conditional display in a SQL-Report/Report Region

    Hi,
    here I have an example for "Conditional display in a SQL-Report/Report Region". I figured it out in Firefox 3.6.2 using Firebug as development tool on Apex 3.2.1.00.12.
    First you have to put the following javascript code in the Page HTML-Header:
    <script type="text/javascript">
    <!--
    // SOURCE
    // W:\oracle\PRJ DWLS\javascript.07.js
    // Beispiel Funktion zur bedingten Formatierung einer Tabellenzelle.
    // Help (Substitution Strings):
    // http://htmldb.oracle.com/pls/otn/wwv_flow_help.show_help?p_lang=de&p_session=2412201185523196&p_flow_id=4003&p_step_id=420,4003
    // HTML Expression:
    // <script>ex_conditional_td('R094260001010', #ROWNUM#, #COLNUM#-1);</script>#DFT_COND1#
    function ex_conditional_td
    ( p_id
    , p_rownum
    , p_cellnum
      var l_td;
      l_td = vd_getColumn(p_id, p_rownum, p_cellnum);
      // hier die Bedingung definieren
      if (true) {
        l_td.style.color = '#808080';
    }  // -- eof ex_conditional_td -- //
    // Beispiel Funktion zum Abstellen der onMouse Funktionalität der Tabellenzeile
    // HTML Expression:
    // <script>ex_conditional_tr('R094260001010', #ROWNUM#);</script>#DFT_ID#"
    function ex_conditional_tr
    ( p_id
    , p_rownum
      var l_tr;    // TABLE.TR
      var l_td;    // TABLE.TR.TD
      if (true) {
        l_tr = vd_getRow(p_id, p_rownum);
        l_tr.onmouseover = null;
        l_tr.onmouseout  = null;
        for (var i=0; i<l_tr.cells.length; i++) {
          l_td = l_tr.cells;
    l_td.style.backgroundColor = '#DDDDDD';
    } // -- eof ex_conditional_tr() -- //
    var g_DEBUG = false;
    var g_TBODY = null;
    // Liefert das Body-Element der Tabelle mit der ID <p_id>.
    // Parameter
    // p_id - die Id der HTML-Tabelle
    // Return
    // das Body-Element oder NULL, wenn die Zeile nicht gefunden wurde
    function vd_getBody
    ( p_id
    if (g_TBODY == null) {
    var l_table = null;
    l_table = document.getElementById( p_id );
    if (l_table == null) {
    l_table = document.getElementByName( p_id );
    if (l_table != null) {
    if (vd_debug()) {
    alert("Tabelle gefunden, " + l_table.nodeName);
    g_TBODY = vd_search( l_table, 'TD', 't10data', 'TBODY');
    return g_TBODY;
    } // -- eof vd_getBody() -- //
    // Liefert die Zeile <p_rownum> der HTML-Tabelle mit der Id <p_id>.
    // Parameter
    // p_id - die Id der HTML-Tabelle
    // p_rownum - die Zeilennummer
    // Return
    // die Zeile oder NULL, wenn die Zeile nicht gefunden wurde
    function vd_getRow
    ( p_id
    , p_rownum
    var l_body = vd_getBody(p_id);
    if ( l_body != null
    && l_body.nodeName == 'TBODY'
    && l_body.children[p_rownum].nodeName == 'TR') {
    return l_body.children[p_rownum];
    else {
    return null;
    } // -- eof vd_getRow() -- //
    // Liefert die Spalte <p_column> der Zeile <p_rownum> der HTML-Tabelle mit der
    // Id <p_id>.
    // Parameter
    // p_id - die Id der HTML-Tabelle
    // p_rownum - die Zeilennummer
    // p_column - der Index der Spalte / Zelle
    // Return
    // die Zelle oder NULL, wenn die Zelle nicht gefunden wurde
    function vd_getColumn
    ( p_id
    , p_rownum
    , p_column
    var l_tr = vd_getRow(p_id, p_rownum);
    if ( l_tr != null
    && l_tr.nodeName == 'TR'
    && l_tr.children.length >= p_column
    && l_tr.children[p_column].nodeName == 'TD') {
    return l_tr.children[p_column];
    else {
    return null;
    } // -- eof vd_getColumn() -- //
    // Rekursives Suchen nach einem Node.
    // Zweck: Das bedingte Formatieren einer Tabellenzelle in einem Apex Standard
    // SQL-Report.
    // Diese Funktion durchsucht rekursiv, ab einem Ausgangsknoten <p_node>, alle
    // darunter befindlichen Elemente, ob in dem Element <p_seachIn> sich die
    // Klasse <p_class> befindet.
    // Bei Standard-Reports ist die Reportzelle (TD) mit der Klasse
    // "t10data" formatiert.
    // Zunächst muss dazu die Tabellenzelle (TD) selbst, die übergeordnete
    // Tabellenzeile (TR), der Tabellenbody (TBODY) oder die Tabelle (TABLE)
    // selbst ermittelt werden.
    // Der Beispielaufruf:
    // var l_body;
    // var l_node = document.getElementById( 'R112233' );
    // l_body = search( l_node, 'TD', 't10data', 'TBODY');
    // durchsucht also das mit der Id "R112233" versehene Element [der Report, für
    // den in Apex eine statischen ID vergeben werden musste] rekursiv, bis er
    // die [erste] Tabellenzelle "TD" findet, die als Klasse "t10data"
    // definiert hat. Für diese ermittelt er dann das übergeordnete TBODY-Element.
    // Parameter
    // p_node - das Ausgangselement
    // p_searchIn - der Knotenname, der durchsucht werden soll
    // [node.nodeName == p_searchIn]
    // p_class - der Name der CSS Klasse
    // [node.classList[<index>] == p_class
    // p_parentName - der Name [node.parentNode.nodeName == p_parentName]
    // des Elements, das zurückgeliefert werden soll. Wird als
    // p_parentName der Suchname p_searchIn angegeben, wird
    // das Element selbst zurückgegeben.
    // Return
    // das per p_parentName gesuchte Element (TD, TR, TBODY, TABLE)
    function vd_search
    ( p_node
    , p_searchIn
    , p_class
    , p_parentName
    var LN = "vd_search";
    var l_element = null;
    // DEBUG
    if (vd_debug()) {
    alert(LN + ":" + "Untersuche " + p_node.nodeName + ", id=" + p_node.id);
    // 1) der aktuelle Knoten ist der, der durchsucht werden soll
    if (p_node.nodeName == p_searchIn) {
    if (p_node.classList.length > 0) {
    for(var c=0; c<p_node.classList.length; c++) {
    if (p_node.classList[c] == p_class) {
    // Parent Node dynmisch suchen
    l_node = p_node;
    if (l_node.nodeName == p_parentName) {
    return l_node;
    while(l_node != null && l_node.parentNode != null) {
    if (l_node.parentNode.nodeName == p_parentName) {
    return l_node.parentNode;
    else {
    l_node = l_node.parentNode;
    // 2) wenn nicht 1) oder nicht in 1) gefunden, dann in den Kindelementen
    // weitersuchen
    if (p_node.children.length > 0) {
    var i = 0;
    while (i<p_node.children.length && l_element==null) {
    l_element = vd_search( p_node.children[i], p_searchIn, p_class, p_parentName);
    i++;
    return l_element;
    } // -- eof vd_search() -- //
    // Gibt an, ob Debug ein- (true) oder ausgeschaltet (false) ist.
    // Return
    // true - debug ist eingeschaltet
    // false - debug ist ausgeschaltet
    function vd_debug()
    return g_DEBUG;
    -->
    </script>
    Maybe you have to modify the "vd_getBody" function. I'm searching the table cell with having the class "t10data". When you use another theme, there's maybe another class used.
    Second is, that you set an static id for your report region. I prefer this structure:
    R<app-id><page-id><seq> (Raaaaappppsss) e.g. R094260001010.
    First example is to turn off the onMouse-Effect. Maybe on the first or last column definition you put this code in the "HTML-Expression" area:
    <script>ex_conditional_tr('R094260001010', #ROWNUM#);</script>#ID#This will call the example function ex_conditional_tr with the parameter
    a) the region id
    b) the rownum (as oracle always starts with 1 this is the first data row [rownum=0 is the table header row])
    Second example is the conditional formatting of a table cell. Put this in the HML-Expression area:
    <script>ex_conditional_td('R094260001010', #ROWNUM#, #COLNUM#-1);</script>#ENAME#This will call the example function ex_conditional_tr with the parameter
    a) the region id
    b) the rownum
    c) the cellnum (here we have to subtract 1 to get the "real" cell index)
    The "ex_conditional" functions are just a representation of how to get the row or cell node.
    Hope this help a bit.
    Tom

    I would use a CASE statement in the select....
    each CASE would be an img src tag for a different button if the button is an image.
    does that make sense? I can include an example if you would like...

  • How can we display the list of Report Names in Dashboard Prompt?

    How can we display the list of Report Names in Dashboard Prompt?

    Hi,
    No its not possible to display list of reports in dashboard prompts.
    Can do this using SQl results in prompt(we write query checking out report names manualy),but its not easy thing if you are having many report names to be displayed.
    Assign points and close your threads if answered.
    Refer : http://forums.oracle.com/forums/ann.jspa?annID=939
    Regards,
    Srikanth

  • ME2L : still to be delivered is not displayed correctly in ALV report

    Dear All,
    The still to be delivered and still to be invoiced quantity is not being displayed correctly in ME2L report. In BEST format the report displayes the correct values. In the ALV form the quantity is same as the ordered quantity.
    can anyone he

    If the selection is the same for BEST layout and ALV layout then the results should equal.
    if a field in ALV display has a different value than in the old list display, then it pretty much looks like a bug, and bugs can only be erased by program changes from SAP via OSS notes.
    Check SAPNet for notes, open a message yourself to SAP if you dont find any.

  • Stored Procedure for displaying data in Crystal Reports

    Hi I am new to Oracle & Crystal Reports,so can any one please give me sample stored procedure to display data in Crystal report from Oracle by passing rwo input values.

    from site:-
    Crystal Reports will only support the return of a single refcursor from Oracle. Even the latest and greatest version 10 doesn't allow you to return more than one recordset at a time. You could add one more step to your procedure that would join up the output of the multiple refcursors into a PL/SQL table and then fetch the result set out through a single refcursor. That way you are using temporary space that will be cleaned up as soon as the connection is terminated and will only be returning a single refcursor

  • Presentation Variable - Display 'All Values' in Report Title

    If I create a Dashboard Prompt and then set it equal to a Presentation Variable, I then display this Presentation variable in the report title. For the Dashboard Prompt I allow them the 'All Values' choice, in fact, this is the default.
    The issue is displaying this in the Report Title, when it is 'All Value' nothing is display in the title, when they select a value such as 'Region D' then it works and this value will dispaly.
    I looked at the documentation and it says you can use a default value, however, setting up that still does not work. It still is blank.
    Has anyone seen this issue or know of a workaround? I'd like to have something like 'All Vales' display or is there a condition I could write to set this.
    Thanks

    Hi Guys,
    I have did the following in order to achieve your requirement:
    As usual, create a request with a column prompted and a dashboard prompt containing that column and set the Presentation Variable (ex: varDept)... bla bla..
    Placed them on the Dashboard to generate your issue, discussed...
    Now, what I have did is:
    1. Created one more Request with the column used on Prompt and specified the Formula to it as:
    CASE WHEN '@{Dept}'||'A'='A' THEN 'All Departments' ELSE '@{Dept}' END
    Note: Take 2 same columns (and hide one) because we are using above formula which does not contains the Column from any table.
    2. Created Narrative View and referenced the above Column.. @2 (in my case).. and specify 1 in 'Rows to Display' field. Do the formatting as required viz., specifying Font size, family....
    3. Place this request in between the Prompt and First Request..
    Now, you can able to see 'All Departments' if 'All Choices' is selected.
    Hope this idea will helps you guys..
    Regards,
    -Vency

  • How to display the drill through report in a new browser seperate window

    Hello All,
    I am working on a drill through report which should run when I select the column value from the main report. The drill through report I am working on is Centerline Validate Angles for a specific line. It has 2 parameters, Pods ID and Angle. Main report supplies
    these 2 values. Right now, I am having an issue in displaying the drill through report in a seperate window. I have selected Go To URL option from the text box properties in main report and gave the expression as
    ="javascript:void(window.open('http://vmaidbdev1/Reportserver?%2fADN2%2fPipeline%2fCenterline+Validate+Angles+For+Specifi+Line&rs%3aCommand=Render&PODS_ID="&Fields!LINE_ID.Value &"&Angle="&Parameters!Angle.Value
    This is not working. The field in the main report is clickable but when I click it is throwing me error as Reporting services error. Could any one let me know if there is any error in the above expression or anything I need to add or correct.
    Please help. Thanks so much.

    Hi srisql,
    Sorry for the delay in getting back to you.
    After double-check the URL which I posted, I find that I have made some error in it. As you can see, there are some spaces in the URL. So please try the following expressions to check the issue again.
    Angle parameter is a multi-value parameter:
    ="javascript:void(window.open('http://vmaidbdev1/reportserver?/Adn2/Pipeline/Centerline Validate Angles for a specific line&PODS_ID="& Fields!LINE_ID.Value &"&Angle="
    &Join(Parameters!Angle.Value,"& Angle =") &"','_blank'))"
    Angle parameter is a single-value parameter:
    ="javascript:void(window.open('http://vmaidbdev1/reportserver?/Adn2/Pipeline/Centerline Validate Angles for a specific line&PODS_ID="&Fields!LINE_ID.Value &"&Angle="&Parameters!Angle.Value
    &"','_blank'))"
    The following general URL is for your reference:
    ="javascript:void(window.open('http://server_name/reportserver?/folder/ folder/report_name&parameter_name="&Fields!field_name.Value &"&parameter_name="&Parameters!parameter_name.Value
    &"','_blank'))"
    If you have any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Number with more than 10 decimal places display as 0 in report

    We have a number stored on a table as this long with several decimal values.
    2440.159999999999854480847716331481933593
    On one PC it display in a Crystal report as 0 and to another user it displays at the 2440.   The report formats the display field with 0 decimal places.
    Is there a max precision setting at the database level that is causing this? 
    It seems I can add an SQL express as follows:
         Round ("ORDER_RELEASE"."TOTAL_WEIGHT", 2) to resolve the issue but cannot determine could be causing the differences in display among two different client PCs running the same report.

    Hello,
    CR was built using C++ and therefore the max number is 15 digits plus 1 for the sign of the number.
    Cause could be different runtime of MS C++ but hard to say for sure. I any event the only work around is to use  Store Procedure and break the field into 2 parts. The in CR add a text object and drop the fields into it next to each other. For doing any calculations on them you'll also have to do that in the SP or handle each field manually.
    Thank you
    Don

Maybe you are looking for

  • Ps4 Controller not responding in game please help!

    My controller has been fine for the past year and a bit, but is now not working in game. It is fine when I am on the home screen but when I start a game all controls except the home button stop working and I cannot play, this problem has occurred in

  • Problem in creating war file with context name using '/'

    Hi, I am trying to create a war file and I have given the weblogic.httpd.webApp.cnt/servlet=C:/weblogic/myserver/warfiles/ in weblogic.properties file. My war file exists in C::/weblogic/myserver/warfiles/ directory. Whenever I try to access the page

  • Output doesn't match what I built...

    Hey Thrillseekers....Project is HDV1080i 1440X1080 Tried sharing as a quicktime and boy did that stink up the joint.  Looked like you were watching it through a wrinkled piece of privacy glass with rain falling on it.   And my soundtrack ended a minu

  • Setting number of decimal points using double

    Is it possible to set the number of decimal points e.g. double a = 2 * Math.random() - 1; If I print this it would show something like 0.2342345434332. What I want to do is show 0.234. Is this possible?

  • How do i remove or change my primary apple id set on my imac

    How do i remove or change my primary apple id set on my imac.  My primary iCloud set on my imac shows the apple id i not longer use.