Displaying a before & after in Elements 11?

How can I display a Before & after preview of a photo in work in Elements 11?
Viewing a before & after on the same screen would simplify editing as you can actually see any changes as you make them & if you don't get it the way you want then you could simply make any adjustments.

I think that comparing before and after side by side is more cumbersome and less effective than using the history panel or the layers panel to switch rapidly between two previous edit states. You can better use the display area to see details, and you'll detect subtle changes you could not tell side by side.
I think that comparing side by side is better suited to compare various styles of edits while seeing the whole images.
To do so, use the File/duplicate command. If you have set your preference to 'allow floating windows', you can set your windows as you like. The 'duplicate' is a copy in RAM, it is not saved on the disk unless you do it on purpose.

Similar Messages

Before and After in Elements Editor

In the elements editor I choose to display both the before and after on the screen simultaneously. Each change to the photo changes both photos-rendering the before photo useless. Certainly that is not the intention.
HOW CAN I RETAIN THE "BEFORE" AND CHANGE THE "AFTER"?

John,
I assume you're talking about the "New View" feature. This isn't intended
to give a before/after view. It creates another window showing the exact
same image. The idea is that you can zoom in tight on a small area and make
corrections while seeing the overall effect at the same time in another
window viewed at a different magnification. You could also use it to show
two different areas of the same picture side by side for comparison while
working.
If you want a before and after, you can use the "duplicate image" feature to
make a copy of the file you have open. You could then place them side by
side for comparison.
Another way to to it is to create a blank layer at the top of the layer
stack and then press ctrl-alt-shift-e to merge all the visible layers and
place the composite in the new layer. Then you can toggle the layer off.
Work on the image as you wish. When you want to see the "before", toggle
the merged layer on.
I like to work with separate layers for each step. For example, if cloning,
I create a new layer and clone to the new layer. That way, I can toggle the
layer I'm working with on and off to see the before and after.
I've given you three ways to see a before and after. I hope one of them
will prove useful to you.
Bob

How to remove line space before/after paragraph in Photoshop Elements?

I am using Elements 12 and want to remove the extra spacing that is automatically inserted between paragraphs after a hard return. Is there some way to adjust the extra spacing before/after a paragraph in Elements?

Try resetting the tool (the little arrow next to four lines in the Text Options panel). Setting the leading manually works fine for me in PSE12 with hard carriage returns,
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

I'm front-end developer and I wonder why version 30.0 of firefox does not support pseudo element :before | :after ?

my firefox browser doesn't show the pseudo element :before | :after and they don't work properly.

Try ::before and ::after.
*https://developer.mozilla.org/en-US/docs/Web/CSS/Reference#Pseudo-elements

Question about the Before/After/Test metadata tags

i think that i have read all of the appropriate sections on the wiki but i am a little unclear on how/when i need to add extra info to the Before/After/Test metadata tags.
thus far, i have not done any unit tests that require a component to be added to the display list. i was reading the section on how to do that and i see that all of the above mentioned tags have extra info:
[Before( async, ui )], [After( async, ui )] and [Test( async, ui )]
what do those do and when/why do i need to use them?
thanks
additionally, i am trying to run this simple example derived from what's on the wiki and it always times out.
package HM.FO.User {
import mx.controls.Button;
import mx.events.FlexEvent;
import org.flexunit.Assert;
import org.flexunit.async.Async;
import org.fluint.uiImpersonation.UIImpersonator;
public class UserWindowPresenterTest {
//protected var window:UserWindow;
protected var button:Button;
[Before( async, ui )] public function setUp():void {
//this.window = new UserWindow();
this.button = new Button();
//Async.proceedOnEvent( this, this.window, FlexEvent.CREATION_COMPLETE, 20000 );
Async.proceedOnEvent( this, this.button, FlexEvent.CREATION_COMPLETE, 20000 );
//UIImpersonator.addChild( this.window );
UIImpersonator.addChild( this.button );
[Before( async, ui )] public function tearDown():void {
//UIImpersonator.removeChild( this.window );
//this.window = null;
UIImpersonator.removeChild( this.button );
this.button = null;
[Test( async, ui )] public function on_user_saved_clears_password_fields():void {
// this.window.pass_txt.text = "foo";
// this.window.pass_confirm_text.text = "bar";
// var presenter:UserWindowPresenter = this.window.presenter as UserWindowPresenter;
// presenter.on_user_saved( null );
// Assert.assertNull( this.window.pass_txt.text );
// Assert.assertNull( this.window.pass_confirm_text.text );
Assert.assertTrue( true );

Okay, so the async modified is used to indicate that the asynchronous statement will be used.
There is a bit of overhead adding async to tests, so, we don't actually instantiate the code that handles Async unless the async attribute is in the Before, After or Test. If you don't place the async in these tags [Test(async)] and attempt to use the async code. Async.whatever... you will get an error.
Regarding the ui, attribute, the same concept was intended to apply for ui elements... in other words we wouldn't build the necessary infrastructure.. that is an optimization and right now is not in play. so you will not see different behavior with or without the ui.
If I copy your code directly from below and paste it in my environment it passes.
Mike

Lenovo Ideapad U410: Display not working after sleep and/or restart

Hello all,
I am recently having some inconsistent display issues with my Lenovo U410 laptop i7 1TB with a Windows 8 PRO upgrade (came with windows 7).
When I press the Power Button on my laptop to put it to sleep, the Screen turns black as if it is off, but the Power & Battery LEDs on the front of the laptop remain on, as well as the LED on the power button. However, when I try to wake my laptop, there is no response on the screen (remaining black as if it is off). The internal fan is running, however I receive no feedback when "blindly" trying to input my password.
I've tried to turn the power off and back on to no avail. I've also removed the power source and held the power button for a couple of seconds and that did not solve the issue either. I've tried connecting the laptop to a screen via HDMI (since there is no other AV port on the device), but there was no signal being sent through.
This is an inconsistent issue that began yesterday 6/11/2013. When the laptop is left alone for a little and is turned on again, the display works, but after closing the lid (sleep) or pressing the button, the display fails to turn on upon awakening.
In most recent circumstances, Today (6/12/2013) I was installing a Windows update that required my computer to restart. When the update configured perfectly BEFORE it was restarting, but AFTER the restart, my internal fan began to work, but the display was not on.
Does anybody or Tech support know what may cause this inconsistent behavior? or know any solutions to this issue?

I am facing similar problem - post sleep & sometimes on touchpad event - the screen gets stuck & a strange array of gray screen comes or the existing screen's colors get distorted & the laptop gets stuck.
model - Lenovo U410; 64 Bit; Windows 7 Home basic;, Intel core i5 processor
I have upgraded display drivers but that hasn't changed anything. Any help is appreciated.
Link to Image
Mod edit: Changed oversize pic to link per forum rule: 50k limit on pics. Please use a hosting site and a link or resize the oversize pics.

My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal.

My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal functioning. I have adjusted the delay times before the computer goes to sleep to no avail, so I'm thinking this issue stems from something else.

Have you tried resetting the PMU? The PMU (Power Management Unit) has control over the sleep function, so resetting it may help if the iBook is sleeping unexpectedly.

Junk after document element

"Junk after document element"—what does that error message mean.
InCopy (.icml-file) size is 4 MB. We do some minimal text-corrections in InCopy and after check-in the .icml-file-size is 8 MB and the file is defect.
No help from Adobe support available ! ?
Thanks Andy

add, where you want apex to stop generating code,
apex_application.g_unrecoverable_error := true;example:
htp.init;
wwv_flow.g_page_text_generated := true;
INV_INVOICES_BLOB_DISPLAY(p_image=>:REQUEST);
apex_application.g_unrecoverable_error := true;had most problems when displaying pure XML, apex added junk in the end of file.

Exception Aggregation (Average) displaying incorrect values after EHP1 Upgr

Hi All,
Exception Aggregation (Average) displaying incorrect values after EHP1 Upgrade in our BW system
We have recently upgraded the system to EHP1. After the upgrade some of the queries where we are using Exception Aggregation (Average) started giving the incorrect values.
Eg. We are displaying three Key Figures KF1, KF2 and KF3 (=KF1 %A KF2) against Store Hierarchy. In KF3 we are using Exception Aggregation (Average) on a characteristic 0PLANT.
There are 14 rows against 0PLANT and out of those 2 rows are blank for KF1, so for KF3. When it is calculating the average of these key figures its dividing the total value by 12 instead of 14 which is not correct in our case. Earlier it was dividing the total by 14.
So in this case 'Average' and "Average of all values <>0" are behaving the same way.
Kindly provide some inputs on this.
Best Regards,
Sachin Verma
+44 7506740018

Hi,
Thanks for viewing the thread. And happy to let you know that the issue was resolved.
The solution was:
Two formulas (local) were created, one including the formula variable with replacement path for ZD1, with exception aggregation on ZD1, and the other with formula variable with replacement path for ZD2, with exception aggregation on ZD2. Both these formulas are hidden.
Another formula (local) was created for u2018time takenu2019 = formula with ZD1 u2013 formula with ZD2, with exception aggregation total on u2018ZDOCNOu2019.
For the second instance, when one requires exception aggregation on records that has multiple values for keys, a nesting of formulas can be done displaying only the ones required.
For e.g. a formula with exception aggregation on say characteristic u2018item no.u2019 can be hidden, and included in another formula for exception aggregation on characteristic u2018document no.u2019. This is a typical case where one can achieve calculation before aggregation for a calculated key figure, formula or a counter.
Hope it might help someone, and saves time and effort for a similar issue posted.
Also would like to keep this thread open for exploring better solutions.
Regards,
Vijay

I just installed lihtroom CC, and in develop, the picture is blue. when I used the before after, the picture before is normal, and the after still blue.

I just installed lihtroom CC, and in develop module, the picture is blue. when I used the before after, the picture before is normal, and the after appears still blue.
I don't know what to do?

Refer below link :
https://forums.adobe.com/thread/1823307
Lightroom 6 is displaying a blue screen with a white X through it in the Develop module for all my photos

Muse CC2014 Widget Installation - Before/After Image Slider

I purchased the "Before/After Image Slider" widget a few weeks ago, but I hadn't installed it yet. Now I can't find it, so I re-downloaded it from the "Install Using Adobe Extension Manager" section. However, it is not downloading correctly as a .mulib file. Instead, it is downloading the Adobe Extension Manager and only displaying my Fireworks CS6 add-ons - not my Muse CC2014 add-ons. Does anyone know how to access it?

Hello,
Please make sure you are launching ZPX file using Extension Manager CC (not Extension manager CS6) This addon should show under "Others" In Extension Manager CC.
Please check the detailed steps to install it.
1. Download the ZPX file by clicking "Download Before/after image slider" button in the link below:
https://creative.adobe.com/addons/patches/4860/install
2. Once Downloaded, Launch Extension Manager CC and Click install and select the ZPX file. IT will be installed in "Others" tab
3. Once the installation is over please check Download folder and you will find a file named as musethemesbeforeafterimageslider.mulib.
4. Double click the file to add it to Muse.
If this is not the case please make sure Extension manager CC is upto date. You can Check it from Creative cloud application.
Regards
Vivek

How to Run Operating System Command Before/After Message Processing SAP PI

Hi,
We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
When we use single command say for example cp or mv (copy or move) the commands get executed fine.
eg: cp %F /var/opt/data/outbound/Test/Dummy.txt
/this works fine/
when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
eg:
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
or
wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
Is it possible to execute multiple commands or redirect the output of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

Hi Harleen,
try like this
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
instead of semicolon try this
(1) &
command1 & command2
Execute Command1 and then execute Command2
(2) &&
command1 && command2
Runs the command2 only when command1 doesn't Complete successfully
(3) ||
command1 || command2
Runs the second command if the first command had an error
(4) ()
(command1 || command2) || (command3 & command4)
Defines the order in which commands are to be executed
Regards
Suraj

Ipad 4 retina display is slow after iOS 8

ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).
also I've got message from apple that im not authorised to post this message, so if it goes online i think after many years of apple desktop and mobile i am done with it))).

Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.

Ipad 4 retina display is slow after iOS 8, also upgrade the the iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great.

ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).

Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.

Impdp triggers always give error ORA-04071:missing BEFORE, AFTER or INSTEAD

Hello,
I am using 11g impdp to create a test system.
I use this cmd to import
impdp 'SYS/xxxxx@PWRFUN AS SYSDBA' dumpfile=PWRPROD.DMP logfile=PWRFUNimportPROD.log SCHEMAS=pwrplant TABLE_EXISTS_ACTION=REPLACE
Then I get this error for all the triggers
ORA-39083: Object type TRIGGER failed to create with error:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
Failing sql is:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;
As you can see, the trigger does contain the word "before".
When I remove " "PWRPLANT"."APPROVAL_STEPS_HISTORY" " and run the trigger below, it compiles correctly. Why is this, and how do I make my impdp to run correctly?
CREATE TRIGGER PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;

same error, thanks for your attemp
Error starting at line 1 in command:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
REFERENCING new AS new
FOR EACH ROW
BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;
Error report:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
04071. 00000 - "missing BEFORE, AFTER or INSTEAD OF keyword"
*Cause:    The trigger statement is missing the BEFORE/AFTER/INSTEAD OF clause.
*Action:   Specify either BEFORE, AFTER or INSTEAD OF.

Displaying a before & after in Elements 11?

Similar Messages

Maybe you are looking for