Displaying a message in forms

Hi all,i want to display a message in forms.When i am trying to do the below in whenn-button-pressed trigger i am getting an error.Kindly correct me where i am going wrong
select count(m1) from mtl_transactions_interface;
message(m1 || 'Records inserted');
Error:
an INTO clause is expected in the select statement.How to correct the above error and display my message.
Thanks in advance!!

Thanks Manu for your reply,it will work.But,i tried it using SQL%ROWCOUNT.
m1:=SQL%ROWCOUNT;
message(m1 || 'Records inserted');
m1:=SQL%ROWCOUNT;
FND_MESSAGE.SET_STRING(m1 || 'Records inserted'); --testing
FND_MESSAGE.SHOW;Manu,however i do have a doubt.Whenever i tried to display the message using just message,it din't work out.However,it worked out when i put a fnd_message.If you have time kindly suggest me what's the diff between message and fnd_message
Thanks in advance!!
Edited by: sandy on Oct 11, 2011 11:16 AM

Similar Messages

Display error message in forms from function "verify_function"

Hi,
We have a number of users with our own created profile attached to them.
We have enabled the 'PASSWORD_VERIFY_FUNCTION' for our own profile.
Function "verify_function" is used to validate a user's password.
In "verify_function" we have used "raise_application_error" message in case password validation fails.
Example:
raise_application_error(-20001,'Password must be minimum 8 characters in length and maximum 30 characters long');Question) "raise_application_error" displays the error message only in SQL Plus prompt. How do I display the same message from Oracle forms?.
I have used DBMS_ERROR_TEXT & DBMS_ERROR_CODE in ON-ERROR trigger. This is not displaying the error message in forms in case validation failed in "verify_function". Oracle simply clears the username/password field with a new window. We want to display the error message that occured in "verify_function".
Thanks

use the following code in validating the item, e.g when-button-pressed
begin
verify_function;
exception
when others then
message(sqlerrm);
raise form_trigger_failure;
end ;
OR
instead of writing a procedure rewrite it as a function to return 1 if password is correct or 0 if password is wrong
Regards
Jihad

How to display errror message in a form based on a procedure

I created a single-level form based on a procedure. In this form, I would like to generate an error message inside of a custom button, so I used the following inside of that button:
p_session.set_value (p_block_name => 'DEFAULT',
p_attribute_name => '_STATUS',
p_value => 'Please choose a valid chair from the popup icon.');
Unfortunately, it returned a WWV-0000 error code without any error messages. I use that code in another single-level form based on a table/view, and it works fine, but I need a single-level form based on a procedure. Therefore, I want to know if that code snippet can be used in a form based on a procedure or not? Do we have any other ways to display error messages in pl/sql besides p_session.set_value(...);
Thanks in advance.

Somebody please response.

How to compare two currency form fields and display a message if the fields do not equal?

My form has 2 fields named Total_1 and Total_2. If one of the fields does not equal the other, a hidden field will display a message in red on the form alerting the user. Otherwise, the message does not display. Looks like a validation script but I would greatly appreciate help in getting it started. Any ideas?
Thanks, Charlie
charlie6067

Since the field values that you want to compare are the results of calculations, you should not normally compare their string values, but rather their numeric values when rounded appropriately (and perhaps then converted to a string). For example, if you have two values that display as 3.14, one could be 3.1400000001 and the other could be 3.13999999999991234. When you get the field values as strings and compare them, they won't be equal though they appear to be. Even some values that are numerically identical won't be equal when compared as strings ("0.0" != "0.00") So the code could be changed to:
// Get the two field values, rounded to two decimals
var v1 = util.printf("%.2f", getField("Total_1").value);
var v2 = util.printf("%.2f", getField("Total_2").value);
// Hide/Show the error message
event.value = (v1 === v2 || (+v1 === 0 && +v2 === 0)) ? "" : "Error message here.";

Scan through the records in the Form and display the message!

Hello Everyone,
We have a requirement, I do not know how to achieve it.
In a Forms 6i, 2 fields Type, Comment.
Type is a list of Values (1,2,3)
Comment - Free Text Field.
User can enter as much rows of data, but while user saves the data we have to validate that all the records of Same Type(Say 1). If not we have to display a Message.
So how to achieve this? How to scan through the records in the Form. Any comments on it would be great.
Thanks.

User can enter as much rows of data, but while user saves the data we have to validate that all the records of Same Type(Say 1). If not we have to display a Message.I am assuming that you want to check from the first record. Suppose in first record the user coosed 1 and you will check for all the entries for 1.
Couple of ways to do this.
1. While user is entering first record. You can keep that selected type value in GLOBAL variable and while he is entering further records you can match type with that global variable. If it is not matching then you can display message.
2. On KEY-COMMIT trigger you can start loop from first record and can check for all the records one by one. Like.
DECLARE
vVal DATATYPE;
BEGIN
GO_BLOCK('BLOCK_NAME');
FIRST_RECORD;
vVal:=:FORM_TYPE_FIELD;
LOOP
    IF vVal!=:FORM_TYPE_FIELD THEN
      MESSAGE(..);
      EXIT;
    END IF;
    EXIT WHEN :SYSTEM.LAST_RECORD='TRUE';
    NEXT_RECORD;
END LOOP;
END;I would go for earlier approach and will use WHEN-VALIDATE-ITEM / PRE-INSERT for type field for this purpose. Because in KEY-COMMIT the system is doing same thing again.
-Ammad
Edited by: Ammad Ahmed on May 15, 2010 12:23 AM
changes not equal sign to !=

Raise_application_error is not displaying error message in my form

Hi,
I have created one procedure in order to display the error message in front end forms.But which is not display the error message in my form when call the procedure.
Please refer the code.
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR(-20001,P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
END;
Thanks & advance
Regards
Maran

Hi,
-------form program unit------
PROCEDURE RAISE_APP_ERR(P_ERR_CODE NUMBER) IS
alert_button NUMBER;
Raise_Exception EXCEPTION;
PRAGMA EXCEPTION_INIT(Raise_Exception, -20001);
BEGIN
--- called backend procedure
PRC_RAISE_APPLICATION(P_ERR_CODE);
EXCEPTION
WHEN Raise_Exception THEN
alert_button := SHOW_ALERT('raise_alert');
If alert_button = ALERT_BUTTON1 Then
Raise FORM_TRIGGER_FAILURE;
End If;
END;
---------- db proc----
CREATE OR REPLACE PROCEDURE PRC_RAISE_APPLICATION(P_ERROR_CODE IN HRM_ERR_CODE.HEC_ERR_CODE%TYPE
) AS
CURSOR C_ERR IS
SELECT HEC_ERR_ARB_DESC
FROM HRM_ERR_CODE
WHERE HEC_ERR_CODE = P_ERROR_CODE;
M_ERR_ARB_DESC HRM_ERR_CODE.HEC_ERR_ARB_DESC%TYPE;
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
IF C_ERR%NOTFOUND THEN
M_ERR_ARB_DESC := 'UNKNOWN ERROR ';
END IF;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
EXCEPTION
WHEN NO_DATA_FOUND THEN
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||'-'||'UNKNOWN ERROR ');
END ;
I tried the same but still i am not getting error message in Forms.

How can i display system messages(forms,rep) in prefered language

I want to display returned messages from the system,on reports,charts,Forms buttons in users preferred language. How can i dot that
Thanx in advance

Hi,
If you want to display your own message then you add those messages in a table wwnls_strings$. The strings you insert should be in a different domain like 'userdefined'. Please describe the table to know more about the table. You can then use get_string
wwnls_api.get_string(
p_domain => 'USERDEFINED',
p_sub_domain => p_sub_domain,
p_name => p_name,
p_language => wwctx_api.get_nls_language,
p0 => p0,
p1 => p1,
p2 => p2,
p3 => p3);
Thanks,
Sharmila

How do you build a web page to display queued messages ?

How do you build a web page to display queued messages in all states?
Thanks,
Reeta
Reeta Joseph Benoy
EDS@XEROX
Database Administration
1350 Jefferson Rd
Rochester, NY 14623

You can build a form to a procedure in oracle portal that explores the queue with the option browse and prints de type message with htp package. I made it in this way and my applicattion works right. The procedure must loop the select count(msgid) from aq$[queuetable_name] times.

How can i display the message

public class Userdefined extends Exception {
          Userdefined(String sparam){
          System.out.println(sparam);
          Userdefined(){
     private static int acno[]={100,105};
     private static double bal[]={100.00,200.00};
     public static void main(String args[]) {
          try{
          for(int i=0;i<2;i++)
               System.out.println("ACCCCNO------>"+acno[i]+"BAl------>"+bal);
               if(bal[i]<150.00)
          Userdefined udexp=new Userdefined("bal less");
          throw udexp;
          catch(Userdefined e){
               System.out.println("--->"+e);
How can i display the message "less amt" using my parmeterized constructor.

VinayTK wrote:
How can i display the message "less amt" using my parmeterized constructor.Erm ... what? You can't --- at least not with the stuff you've got there.
A properly formed question, with some idea of what you're trying to accomplish would be a huuuuge help.
Winston
BTW: Congratulations. At my age, 'first's in computing are rare; but it's definitely the first time I've seen an Exception class with a main() method.
Edited by: YoungWinston on Sep 1, 2009 9:46 AM

How to display a message after button press ?

Hi,
I created a jspx page with a button.
When that button is pressed, a lot of stuff is going to happen in my backing bean.
This can take up to 30 seconds. (soap call etc ... )
Meanwhile, the pressed button stays greyed out. When the action is finished, the button
is available again.
I want to display a message saying the action was succesfull or not, after that button is available again.
Can anyone help me how I can make this ?
Greetz.

Why not opening a popup from your backing bean?
Add a popup to your page:
<af:popup id="yourID" bindings="#{yourBean.popup}">
</af:popup>Open this in your backing bean:
    public void OpenPopup(String popupID) {
      FacesContext facesContext = FacesContext.getCurrentInstance();
      ExtendedRenderKitService service = Service.getRenderKitService(facesContext, ExtendedRenderKitService.class);
      service.addScript(facesContext,"AdfPage.PAGE.findComponent('"+this.getPopup().getClientId(facesContext) + "').show();");
    }This way you can add anything you want in your popup. forms, messages, images,...

How to display error message ??

Hi,
I have a BDC program to upload data from an excel sheet. I could see that some records of data fail to pass and hence after my bdc run i would like to display error message for the failed records as follows:
costcenter:
cost element:
fiscal year:
etc etc
is it possible ?? how to do that ? please explain in detail.
for ur reference my program is pasted below.
thanks
*& Report ZBDC_BUDGET_UPLOAD
REPORT ZBDC_BUDGET_UPLOAD.
types: begin of tdata,
         rec(150) type c,
       end of tdata,
       begin of tmtgp,
         costcent LIKE CCSS-KOSTL,
         costelem LIKE CCSS-KSTAR,
         fisyear LIKE CCSS-GJAHR,
         jan(10),
         feb(10),
         mar(10),
         apr(10),
         may(10),
         jun(10),
         jul(10),
         aug(10),
         sep(10),
         oct(10),
         nov(10),
         dec(10),
       end of tmtgp.
data: idata type table of tdata with header line.
data: imtgp type table of tmtgp with header line.
Data : fieldval(10) type c.
selection-screen begin of block b1 with frame title text-001.
parameters: p_file type localfile default 'C:\budget_data_csv.csv'.
selection-screen end of block b1.
include zbdcrecx1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
        exporting            static    = 'X'
        changing            file_name = p_file.
start-of-selection.
perform upload_data.
loop at imtgp.
Write imtgp-fisyear to fieldval.
perform open_group.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'KPP0B-VALUE(04)'
                              fieldval.
Write imtgp-costcent to fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'KPP0B-VALUE(06)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-costelem to fieldval.
perform bdc_field       using 'KPP0B-VALUE(09)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CSPB'.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jan to fieldval.
perform bdc_field       using 'Z-BDC03(01)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-feb to fieldval.
perform bdc_field       using 'Z-BDC03(02)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(03)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-mar to fieldval.
perform bdc_field       using 'Z-BDC03(03)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-apr to fieldval.
perform bdc_field       using 'Z-BDC03(04)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(05)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-may to fieldval.
perform bdc_field       using 'Z-BDC03(05)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jun to fieldval.
perform bdc_field       using 'Z-BDC03(06)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(07)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jul to fieldval.
perform bdc_field       using 'Z-BDC03(07)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(08)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-aug to fieldval.
perform bdc_field       using 'Z-BDC03(08)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-sep to fieldval.
perform bdc_field       using 'Z-BDC03(09)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(10)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-oct to fieldval.
perform bdc_field       using 'Z-BDC03(10)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(11)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-nov to fieldval.
perform bdc_field       using 'Z-BDC03(11)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-dec to fieldval.
perform bdc_field       using 'Z-BDC03(12)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CBUC'.
perform bdc_transaction using 'KP06'.
perform close_group.
endloop.
form upload_data.
data: filename type string.
clear idata.
refresh idata.
filename = p_file.
call function 'GUI_UPLOAD'
    exporting            filename        = filename
    filetype        = 'ASC'
    tables            data_tab        = idata
    exceptions            file_open_error = 1
    file_read_error = 2
    no_authority    = 6
    others          = 17.
    check sy-subrc = 0.
    loop at idata.
    clear imtgp.
    split idata at ',' into imtgp-costcent imtgp-costelem imtgp-fisyear
imtgp-jan imtgp-feb imtgp-mar imtgp-apr imtgp-may imtgp-jun imtgp-jul
imtgp-aug imtgp-sep imtgp-oct imtgp-nov imtgp-dec.
    append imtgp.
    endloop.
endform.

check the below code,.,
DATA : t_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
CALL TRANSACTION '<DELIVERYTRANSACTION>' USING t_bdctab
                          mode 'N'
                          MESSAGES INTO t_bdcmsgcoll.
DESCRIBE TABLE t_bdcmsgcoll LINES g_lines.
READ TABLE t_bdcmsgcoll INDEX g_lines.
IF t_bdcmsgcoll-msgtyp = 'S' AND
     t_bdcmsgcoll-msgid = <Msg id> AND
     t_bdcmsgcoll-msgnr = <Msg number>.
* Trap your Call Transaction messages
    t_success-deliverynumber = t_bdcmsgcoll-msgv1.
* You can format the message returned by call transaction using function 'FORMAT_MESSAGE' which will return g_mesg
    t_success-message = g_mesg.
    APPEND t_success.
    CLEAR t_success.
ELSE.
* If there an Error-Do this..
    READ TABLE t_bdcmsgcoll WITH KEY msgtyp = 'E'.
    IF sy-subrc = 0.
* Format your message using FORMAT_MESSAGE "FM
     CLEAR g_mesg.
     t_error-msg   = g_mesg_incl.
     APPEND t_error.
     CLEAR t_error.
   ENDIF.
ENDIF.
* Clear for next run
CLEAR: t_bdcmsgcoll,
         t_bdctab.
REFRESH: t_bdcmsgcoll[],
           t_bdctab[].

Problem while displaying popup message while using inputfile component

Hi
I am using JDEV 11.1.1.2.0, using ADF i developed and application
in my page i have a input file component, from which i am taking a csv file and reading it through valuechangeevent of inputfile component. I have used myfaces.trinidad-UploadedFile to get the selected file and read it using inputstream.
I have put some validation check (validation check is done while reading the file using valuechangeevent of the inputfile component), while reading the file and incase i receive any error (validation mismatch), the reading of file stops ... and before doing that i used to display error message using below method:-
public String ValidationCheck(String attrname, String attrvalue, int rownumber) {
String msg="Validation error found in "+attrname+" with value "+attrvalue+" of row "+rownumber+" in the file. Please correct the file and retry/";
FacesContext ctx = getFacesContext();
FacesMessage fm = new FacesMessage(FacesMessage.SEVERITY_ERROR, msg, "");
ctx.addMessage(null,fm);
return null;
i have used the same method to display message in other places where its showing correctly but fails in inputfile component.
Please help me out how can display messages from inputfile component??
Thanks
Sudeep
Edited by: SKD on Feb 21, 2012 12:02 PM
Edited by: SKD on Feb 21, 2012 4:08 PM
Edited by: SKD on Feb 21, 2012 4:11 PM

It works fine for me (albeit on 11.1.2.1). Here is my complete test case:
FileUploadTest.jspx:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:document title="FileUploadTest.jsf" id="d1">
    <af:form id="f1" usesUpload="true">
      <af:inputFile label="Label 1" id="if1" valueChangeListener="#{TestBean.vcl}"/>
      <af:commandButton text="commandButton 1" id="cb1"/>
    </af:form>
    <af:messages id="m1"/>
</af:document>
</f:view>TestBean.java:
package view;
import javax.faces.application.FacesMessage;
import javax.faces.context.FacesContext;
import javax.faces.event.ValueChangeEvent;
import oracle.adf.share.logging.ADFLogger;
public class TestBean
private static final ADFLogger _LOG = ADFLogger.createADFLogger("view.TestBean");
public TestBean()
public void vcl(ValueChangeEvent valueChangeEvent)
    _LOG.severe("in the value change event");
    FacesContext ctx = FacesContext.getCurrentInstance();
    FacesMessage fm = new FacesMessage(FacesMessage.SEVERITY_ERROR, "This is a message", "Message");
    ctx.addMessage(null, fm);
}adfc-config.xml:
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<managed-bean id="__1">
    <managed-bean-name>TestBean</managed-bean-name>
    <managed-bean-class>view.TestBean</managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
</managed-bean>
</adfc-config>John

How to display error message in Billing Output Type (VF03).

Hi,
could anyone suggest how do i display error message via billing (VF03) output type?

i want to display an error message from my sapscript program.
*determine discount
it_zmas-discount = it_zmas-gross_value - zkwert.
MODIFY it_zmas.
ELSE.
MESSAGE ID 'Z0' TYPE 'S' NUMBER '999' WITH 'Please maintain cust pricing grp 34 for ' wa_zmas-matnr.
p_proc_screen = 'X'.
ENDIF.
when user enter billing doc no in vf03, user will click 'issue output type' and select their output type to be printed out.
if there's an error in the print program, it should promt out an error message and do not allowed user to print preview and print the form out.
what i had did previously, i prompt the error message and disable the print preview button. i think its not a good solution and i am not sure how to stop the form from not printing it out.
i was wondering is there any user exit of the output type, vofm (which i had this solutions from my previous question, but unsure how to use it) or any other solutions.
please help.

How to display error message in abap

How to dispaly error message in report?
i have to check the range bewteen two days and if it is not in range have to display error message only once.
next time if i press the execute button report will get executed without showing the warning message.
i am calculating the days between two dates, i am displaying the error message but if i press the execute button i will not allow me to execute the report.it again shows me the error message.i have to skip this in 2nd time.
can any one suggest what to do with this?

hello suman,
i am using select-option in my report. And i have to check the difference between two dates in select option input box( low-value and high-value). if it is greater then suppose 10 then i have to display warning message at once and then if click on execute button , the report should get executed without showing any warning messages in report.
here i am attaching my source code.please take a close look and tell me where should i have to make change.
SELECT-OPTIONS :s_bedat FOR ekko-bedat.
AT SELECTION-SCREEN ON s_bedat.
IF NOT s_bedat IS INITIAL.
    PERFORM bedat_validate.                       " Perform for Purchasing Document Date Validation
ENDIF.
FORM bedat_validate .                        " Form for Purchasing Document Date Validation
DATA : diffr TYPE i.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = s_bedat-high
      i_datum_von                   = s_bedat-low
I_KZ_EXCL_VON                 = '0'
I_KZ_INCL_BIS                 = '0'
I_KZ_ULT_BIS                  = ' '
I_KZ_ULT_VON                  = ' '
I_STGMETH                     = '0'
I_SZBMETH                     = '1'
   IMPORTING
     e_tage                        = diffr
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED       = 1
OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF diffr GT 31.
      MESSAGE s009(zerrormsg) WITH text-000 DISPLAY LIKE 'W'.
      LEAVE TO LIST-PROCESSING.
    ENDIF.
ENDIF.
ENDFORM.                    " BEDAT_VALIDATE

Display error message in SD user exit

Hi,
I want to display an error message in FORM USEREXIT_CHECK_VBAP. (Include MV45AFZB)
Afterwards, the user should be able to correct the wrong values, but the fields are locked because of the error message. How can I keep the relevant fields open?
Thanks in advance
Roland

Hi,
Instead of giving an error message...Probably give warning message..
If you give error message..It will lock the entries..
Thanks,
Naren

Displaying a message in forms

Similar Messages

Maybe you are looking for