Displaying and Printing Payslip without using Adobe forms in WD

Hi,
Is it possible to Display&Print Payslip in WD application without using Adobe forms?,is WD supports Smartfomrs?
Thanks in advance...!!!

Yes, you can convert convert smartform into pdf and display it using web dynpro application. Below link contains detailed information about it.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0de1eb8-0b98-2910-7996-8a3c2fcf6785]
Regards
Vishal Kapoor

Similar Messages

Using Adobe Forms to Print 1099Misc

In past years we were using SAP SCRIPT to print 1099misc and need to use something more current. We'd rather not use SMART FORMS but use Adobe Forms. When search in transaction code SFP I found interface GS_IDWTCERT_US_1099 and form IDWTCERT_US_1099MISC.
It appears that transaction codes S_P00_07000134 and S_PL0_09000134 use Smartforms processing.
Can anyone help me figure out how to the abobe interface and forms noted above to process 1099misc forms?
Regards,
Helen

Generally, if you have the fonts on your system, then the fonts should properly display. To embed the fonts on your system, you would again have to have the fonts on your system. It sounds like some fonts are being used that you do not have. You might try downloading the fonts you think might be the problem. Be careful, you have to have the precise font, not one that sounds correct. Even sometimes fonts with the same name are not really compatible. You should be able to select the text touch up tool (new name in AA X) and select some of the text and see what the font name is. Then you know what you should be looking for.

ECC 6.0 and using Adobe forms in Output

Hello,
We're moving to ECC 6.0.
Is there a driver program for Invoicing that would allow us to use adobe forms
as output from within S/D e.g. (from txn VF03 for a invoice).
Scenario:
We have a custom SAPScript invoice that we would like to consider rewriting as an Adobe form. I've created an equivalent Adobe form and now I'm investigating a way to integrate it with the standad Output Determination.
From txn SPRO, under Sales and Distribution>Basic Functions>Output Control>
   Output Determination>Maintain Output Detemination for Billing Documents>
   Maintain Output Types
   Select output type ZRD0
   Select processing routines from the left pane.
   There is a choice of selecting Smartform or PDF as the type.
   There is a smartforms driver program RLB_INVOICE.
Question:
   Is there an equivalent driver program or sample driver program for Adobe forms?
Regards,
Lavaughn

Hi,
Did you check in transaction SFP what are the form available in your system ?
Also , check in the standard print program if it has been adapt to use Adobe Forms instead of smartforms because it's not the same FM used .
Regards

What's the business case for using adobe forms for handling print forms

Hi
We are just starting our SAP project and are looking at the possibility to use Adobe forms for generating and printing our forms, like purchase orders, invoices etc.
My Question is:
1. Is this possible / adviseable ?
2. if so - what's the business case in using Adobe forms - <i> We have been looking on the SAP Pricing for adobe interactive form, and in our point of view it's grotesque high</i>
3. What other options do we have - do we need to settle with SAP Script / Smartforms ?
Regards
Morten Nielsen

Hi Morten,
1. Is this possible / adviseable ?
As far I know SAP is going to stop support for SAPScript in coming years (I don't know exact dates). It is pretty much advisable to use Adobe Print Forms.
2. if so - what's the business case in using Adobe forms - We have been looking on the
SAP Pricing for adobe interactive form, and in our point of view it's grotesque high
We can use Adobe Print Forms where ever we can able to use SApscripts/PDF print Forms.
3. What other options do we have - do we need to settle with SAP Script / Smartforms ?
It is better to settle with Adobe forms rather than using SAPscript/Smart forms. One of the main reason for this is maintainance is much easier than SAPscript/Smart forms.
But remember that Java Stack need to be installed in order to use Adobe Forms.
Please visit the below SDN area on Adobe forms for more details.
https://www.sdn.sap.com/irj/sdn/interactiveforms
Thanks
Ramakrishna
Message was edited by:
Ramakrishna Ramisetti

We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a

We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer."C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>". Current Situation: The above command line parameter when executed is working as expected in a User's Workspace. When executed in a command line on the Application Server is working as expected. But, the same is not working while executing it from Deployed environment.Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2. Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

This is the Acrobat.com forum. Your question will have a much better chance being addressed in the Acrobat SDK forum.

I am trying to convert a PDF into a document that can be edited - it's a client feedback form. I am using Adobe forms Central and it's saying that it can't use my document.

I am trying to convert a PDF into a document that can be edited - it's a client feedback form. I am using Adobe forms Central and it's saying that it can't use my document.

Hi Michelle ,
We are extremely sorry that you have had a bad experience with Adobe .
As far as your issue is concerned ,Acrobat generally prompts for internet connection as it is required to activate the product before you could use it comfortably .Once the product is activated or licensed you would be able to use the software offline .
This could be the possible reason you are experiencing this .Please check if you have done so and still facing this .And if you have not ,you need to license/activate your product by typing in your credentials ,i.e Adobe ID and password .
You could also refer the following link to get updated about the activation of your product .
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
Regards
Sukrit Dhingra

Develop forms using Adobe Forms and ABAP Web Dynpro

Hi,
Could someone help me on how to learn forms development using Adobe Forms and ABAP Web Dynpro? Any suggestion on Tutorials / Books / other helpful hints please?
I have good knowledge of Smart Forms and used these to generate PDF Attachments via emails.
Thanks.
Regards
Keshav

http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20interactive%20forms%20based%20on%20adobe%20software.faq

Displaying X� ,X� and so on without using graphics

Hi I want to disply X� X� and so on without using graphics.
Is it possible if yes how.
thanks
dharmendra

answered in http://forum.java.sun.com/thread.jsp?forum=31&thread=354790

Using adobe forms in SAP HR ABAP EHP7

Hi All,
I am aware that ADS is used in adobe forms display and designing, but I just wanted to know if we can use adobe forms just to display payslips in PDF as SAP releases HR forms only to be designed using Form builder and not smart forms which in turn can be designed by Adobe life cycle designer only.
Please recommend the method to use Adobe forms in ABAP stack if there is any possibility.
Share references to OSS Notes too

Refer to Print Support For FPM in HCM Processes and Forms by Brandon Toombs
Regards,
Sahir.

How to print page numbers in adobe form

Hi,
Can anybody tell me how to print page numbers in adobe form.
Thanks in advance
Chaitanya

Hi,
Yes the field page n of m is used normally for printing page numbers. But it won't display the current page of total pages by itself. You have to set the run time property to n (current page ) and m (Total number of pages). Carefully select the # (current page ) and ## (Total number of pages). Hope this works for you.
My requirement is to have the user control on current page. For Example:
Example for a Invoice with 5 PO items (stands on 2 pages) :
1st page is the letter : no page number
2nd page is the 1st page of the 1st copy of the invoice : we should read u201C1 / 2u201D
3rd page is the 2nd page of the 1st copy of the invoice : we should read u201C2 / 2u201D
4th page is the 1st page of the 2nd copy of the invoice : we should read u201C1 / 2u201D
5th page is the 2nd page of the 2nd copy of the invoice : we should read u201C2 / 2u201D
Presently i cam getting the current page number for page 4th as 3 / 2 and for 5th page 4 / 2. I could able to control the total number of pages from print program. But when i am printing the second copy (4th and 5th pages), I couldn't able to control the current page number. I need to initialize the Current page count (4th page ) as 1.
I have used the follwing java scripting:
this.rawValue = wv_pages - xfa.layout.page(this)
where wv_pages is total no of pages calculated from print program.
Please help me in this regard with some formcal or java scripting conditions.
Thank You,
Regards,
Naresh.

How to use Adobe forms in ABAP

Hello Everybody,
I have used Adobe forms in webdynpro applications. Now, i want to use adobe forms in ABAP stack. Please provide me steps and guidelines to develop Adobe forms in ABAP.
What should be the infrastructure needed for that?
Thanks in Advance,
Bhavik

Hi Bhavik,
there is extensive documentation on creating PDF-based forms for printing in ABAP Workbench (transaction SFP) on the SAP Help Portal at http://help.sap.com/saphelp_nw04/helpdata/en/d2/4a94696de6429cada345c12098b009/frameset.htm.
The infrastructure is identical (ADS on Java Engine) except that you need an ABAP backend (minimum 6.40) and the corresponding SAP GUI. You also need to create an HTTP connection from your ABAP system to the ADS in transaction SM59 (see ADS Configuration Guide).
Your Adobe LiveCycle Designer installation from the NWDS should be OK, if you are working on the same frontend. (If you have difficulties with Designer, uninstall it and install it with the SAP GUI again).
Note that Web Dynpro for ABAP integration is only supported as of NetWeaver 2004s (going into ramp-up with mySAP ERP 2005 this month), which means that interactive scenarios are more cumbersome to implement in ABAP with NetWeaver 04.
Some of the things you get with the Web Dynpro framework (such as the return of data in interactive scenarios via the WD context) would need to be manually coded when working in SFP, which was designed for output forms.
Hope this helps,
Markus Meisl
SAP NetWeaver Product Management

Size & Quality - Exporting Pix from iPhoto for Display and Printing?

I would like to export pictures from iPhoto for use in PowerPoint.
If the pictures are in 4x3 format, exporting them using the "Custom" size option and specifying 1024 as the maximum pixels results in nice 1024 x 768 photos that fill the screen on most projectors. This is good.
The exported photos are also at 72 pixels/inch. This is OK for onscreen display, but not so good for printing.
Oddly, the results are the SAME (1024 x 768, 72 pixels/inch) whether one specifies Low, Med, High or Max quality in the iPhoto export panel -- though the file sizes ARE different (higher quality = larger sizes). (I used Photoshop Elements to identify the sizes of the exported photos).
What gives? I would have thought higher quality files would have been associated with higher resolution (more pixels/inch) but this doesn't seem to be the case, and I don't understand why the file sizes are larger.
Can someone recommend a way to export a batch of photos from iPhoto at a specific size (1024 x 768) and perhaps 300 pixels/inch) that I might use in PowerPoint for both display and printing? And perhaps explain the bloated file sizes with no apparent quality increase?
Many thanks!

Luxesto
Welcome to the Apple user to user assistance forums
If the pictures are in 4x3 format, exporting them using the "Custom" size option and specifying 1024 as the maximum pixels results in nice 1024 x 768 photos that fill the screen on most projectors. This is good.
The exported photos are also at 72 pixels/inch. This is OK for onscreen display, but not so good for printing.
DPI is meaningless for a digital photo until you display it - Dots Per Inch are just a meaningless number - the displayed DPI is the size of the photo in dots (pixels) divided by the inches of the display measures in inches - the DPI setting in the photo means nothing - see The Myth of DPI for a longer discussion on this.
Oddly, the results are the SAME (1024 x 768, 72 pixels/inch) whether one specifies Low, Med, High or Max quality in the iPhoto export panel -- though the file sizes ARE different (higher quality = larger sizes). (I used Photoshop Elements to identify the sizes of the exported photos).
What's odd? you said export with the largest dimension 1024 - that occurred just as you specified - what would be odd would be that the export were different form your specification
What gives? I would have thought higher quality files would have been associated with higher resolution (more pixels/inch) but this doesn't seem to be the case, and I don't understand why the file sizes are larger.
Higher quality means less compression (and therefore larger file size) - it does not mean a difference in compression - JPEGs have a compression from 1 to 12 available - iPhoto does 4 steps - small, medium, large and highest. I've not see the compression documented but I think of it as like 3, 6, 9 and 12
Can someone recommend a way to export a batch of photos from iPhoto at a specific size (1024 x 768) and perhaps 300 pixels/inch) that I might use in PowerPoint for both display and printing? And perhaps explain the bloated file sizes with no apparent quality increase?
Forget the DPI - just be sure the pixel sizes are correct - for printing you should have at least 150 dpi and 300 dpi is better - so at 150 DPI printing your 1024x768 photo can be printed at 6.8" x 5.12 " -- at 300 dpi it would only 3.4" x 2.55"
LN

How to supress printing title in BAS adobe forms

Dear Experts,
I am using adobe forms to print address on the labels. I haved BAS ie address in the layout and passing dynamically
the address number this works good but it prints "title" like company and then address.
Could you please advise how to supress printing this tilte "company" in the address.
Regards
Chandra

Please refer to my earlier post ... You will get an idea
Please refer to the below thread for detail solution
Sample Interactive form example ?....urgent...
Cheers
Satya

Display and print color matching

Hi all. I need help because I'm coming crazy.
I use Lightroom 5 to organize, edit, print and share my photos. I use an iMac 27" with Maverick installed, I calibrate the display using X-Rite color munki Display. I have a Canon 9500 Mark II printer and I like printing on Canon Fine Art Photo Premium Matte (FA-PM1), I also have a little Epson Stylus Photo P50.
Here we are…I want Lightroom to manage the color when I print and I select the right Icc profile for the printer and the paper but when I print with the Canon printer the prints came out with incorrect colors; last attempt the print came out too magenta. How can I make sure the printer is not managing the color in the printer dialog box? There is nothing that say "none" or "no color management". I'm getting better results with the little Epson printer rather then the more expensive Canon printer.
Anybody can help me?
Thanks a lot.
Mattia

asdjkgh8 wrote:
How can I display and print line numbers in FrameMaker doc? Thanks!
Would you believe "not!" after all these years?
Search Google for "framemaker line numbers" without quotes for a bunch of past postings and suggested workarounds.
Add your request to the crowd at the official request location: wish
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

W-2 and 1099R display and print in Portal

Hi,
I need to get the W-2 and 1099 forms available for an employee in the Portal, they should be able to display and print these forms. (For W2C's I will use the standard W2 reprint request).
I have tried simulating PU19 but the parameters that needs to be passed is getting quite complex and I was wondering if someone has come across this very tricky development. I basically want the user to receive a screen with one dropdown, the year, the user can then choose a prior year and request the W2 or 1099 to be displayed and printable.
The client is on Enterprise 4.7 Ext2.00 with EP6 SP2.
Thank you very much and regards,
Ronald G. Meyer
Seems like I will be using a custom version of RPCTXSU0 for this. This doesn't seem to be something that is a requirement at clients as I had 0 responses ...
Edited by: Ronald Meyer on Mar 21, 2008 7:33 PM

I am reading the TemSe file which was sent to the Tax Authorities which I think is not an optimal solution as there is filename hardcoding involved but this seems to be the best option for now...

Displaying and Printing Payslip without using Adobe forms in WD

Similar Messages

Maybe you are looking for