Displaying both ABAP webdynpro and Java Webdynpro tasks in the UWL
Hi,
We have two an issue when trying to get the UWL to process two different types of workflow tasks : ABAP webdynpro and Java webdynpro.
Examples of these tasks are:
TS12300097 u2013 LeaveRequestApprover u2013 Java Webdynpro
TS17900100 - ASR_PROCESS_EXECUTE u2013 ABAP webdynpro
We have two backend systems configured
SAP_ECC_Financials u2013 This has the WAS host pointing to the java stack (xxx:50000)
SAP_ECC_Workflow u2013 This has the WAS host pointing to the ABAP stack (xxx.80xx)
In transaction SWFVISU all the tasks which use Java webdynpro have been configured to use the u2018Javau2019system (SAP_ECC_Financials) using the SYSTEM_ALIAS parameter
In the UWL configuration the system SAP_ECC_Workflow has been registered
In addition to this all u2018Javau2019 tasks have had an extra UWl config XML created to ensure that the SYSTEM_ALIAS is set to SAP_ECC_Financials
The system SAP_ECC_Workflow has been re-registered
The UWL cache has been cleared
However when we try to launch the java webdynpro tasks the system is trying to access the ABAP stack (It is still trying to access the Web AS location for the system SAP_ECC_Workflow even though the system alias was specified as SAP_ECC_Financials )
The ABAP webdynpro tasks (in this case a HCM process and form) are launched correctly
If we try the reverse (i.e register the Java system SAP_ECC_Financials and change the SYSTEM_ALIAS parameter for the ABAP webdynpro tasks to system SAP_ECC_Workflow) then the reverse happens. The java tasks can be launched and the ABAP tasks cannot.
Does anyone have a solution to this problem. Surely other people have implemented both ABAP and Java webdynpro workflows?
Any help much appreciated
Andrew
Thanks a lot for all your replies..
The workitem type registration has been done already, but still it doesn't work..
But here is the actual problem...
There is a link 'Execute Workitem' in the inbox of the approver, or the second level manager...
In the leave application, when we click on this link it is taking to the portal as the task is the Webdynpro Java application task. Whereas, when using ABAP webdynpro application task, it is taking to R/3 - which means that the user cannot access this link without R/3 access. The users are given only portal access, they don't have access to backend R/3.
The requirement is that the link has to take the user to portal directly instead of R/3 - i.e it should ask only for the portal id and password.
Since it was working fine with leave application, I changed the task to Java webdynpro task, but I think the Java Webdynpro application is not deployed in the server.
Please can anybody suggest.
Best Regards,
Sushmitha
Similar Messages
-
Abap WebDynpro or Java WebDynpro
Hi All!
Which differenced are existing between Abap WebDynpro
and Java WebDynpro. Is it e.g. possible whether
one IView which has been created through Abap
technology combinable or adaptable with an Ivew which has been
created through Java Technology? Or is it a decision in principle
(policy decision)at the bgeinning of a project which one you take ?
Regards
sasHi sas,
Read this article:
http://www.sapfrontend.com/webdynpro-for-java-or-webdynpro-for-abap/
Also have a look at the following links:
Java vs. ABAP
ABAP or Java?
/people/oliver.mayer/blog/2006/06/14/web-dynpro-abap-or-java
Bye
Ankur -
Hi,
can anybody give me a clear idea regarding ABAP stack and Java Stack.
1. What is the concept of these both with respect to BI 7.0.
and explain with an example as i dont have any idea about these.
2. When these are used?
Thanks in advance,
Vijaya.Hi,
Pls check these threads discussing the diff:
https://www.sdn.sap.com/irj/sdn/thread?threadID=153727
https://www.sdn.sap.com/irj/sdn/thread?threadID=89916
Eddy
PS. Which type of SDN Ubergeek/BPX suit are <a href="https://weblogs.sdn.sap.com/pub/wlg/6555">you</a>?
Deadline: June 15th -
Display Both Excise Tab And Customized Tab in MIGO header screen
I want to display both Excise tab and My customized tab in header screen in MIGO..But I have seen at a time one tab is displaying.Can anybody tell me
how I want to diplay both tab at a time??Hi DEBDATTA PANDA,
In MIGO - Excise tab is showing as a part of customization. In PO if tax values are available that values will show in migo(drop down will show capture/refer /capture+post few more ) under excise tab.
pre req. is mat + Vendor +plant need to be excisable .
Now on your Customized tab is purely a Z development.only you can tell .
Also , if you are not seeing excise tab in migo , it means either config or master data missing for material code , Vendor, Plant
regards
manu -
External LaCie HD to display both its Mac and PC partitons. HOW?
My external HD (LaCie 250 Gb) is partitioned this way:
180 Gb - Mac formatted
70Gb - PC formatted
The partition has been done a few years back with Mac OSX 10.2 using its standard disk utility - that’s all I know about tech details of this setup.
The only problem is that when I plug this LaCie 250 Gb into my MacBookPro , only Mac partition is visible.
PC formatted partition does not appear at all.
(My Mac displays any other external PC formatted drives without any problems)
How to make this external LaCie HD to display both its Mac and PC partitions on my Mac?
Thank you all who help me!The PC partition is FAT32.
The program you suggested is commercial but I just can't afford to spend on software that may or may not be suitable...
Any other options to see this PC partition on my Mac, fellow Mac users? -
I have a requirement to install 2 different versions of Java (1.4) and Java (1.5) on the same Windows XP machine. There are 2 applications one uses Java (1.4) and the other Java (1.5)
Both the application is run by taking the JAVA Path , Classpath specified in the Environment variables on the Advanced tab in My Computer. How to achieve it ? Immediate help is required. Thanks in advance.{color:#ff0000}{size:20px}CROSS POSTED{size}{color}
[http://forums.sun.com/thread.jspa?threadID=5333227]
Cross posting is rude.
db -
Just bought a new 4th gen iPod Shuffle for my kid. Problem is I cannot do the initial set up, as the device does not show up on iTunes on my PC. Also the charging does not light up. Any ideas on what could be wrong, as I am able to see both my iphone and iPad on iTunes using the same PC?
I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.
-
I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
So, a typical Lync deployment looks like this:
Internal users
|
443
|
Internal LB
192.168.0.20
443 443
| |
Lync FE 1 Lync FE 2
192.168.0.21 192.168.0.22
| |
4443 4443
External LB
Public IP Address
|
443
|
External Users
This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
is the keyword here.
After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
For reference, my commands are:
Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
(This completes successfully)
Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
(This fails)
The existing external endpoint is configured as such:
Get-AzureVM LYNCFE1 | get-azureendpoint
LBSetName : HttpsExtLB
LocalPort : 4443
Name : HTTPS-Ext
Port : 443
Protocol : tcp
Vip :
ProbePath :
ProbePort : 4443
ProbeProtocol : tcp
ProbeIntervalInSeconds : 15
ProbeTimeoutInSeconds : 31
EnableDirectServerReturn : False
Acl : {}
InternalLoadBalancerName :
IdleTimeoutInMinutes :
LoadBalancerDistribution :
The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
shouldn't be any conflict here... however it looks like there is one instead.
Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain -
TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?
How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com -
EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9. This issue occurs for some users only.I tried the same url in google chrome and is working fine.
Can you please help.
Please find the attached screenshot.Hi BJ1986,
According to your description, I think this issue is caused by the IE browser that runs the report. To trouble shoot this issue, I suggest that we can try to clear internet temporary files, cookies and others in IE browser. And also add this site
as a trusted site in IE browser to check this issue again.
If this issue is still existed, it can also be occurred due to the setting or third party add-ons of Internet Explorer (IE). In this scenario, you can try to run IE in compatibility mode to check the issue again. Or I suggest that you can refer to the
steps below to troubleshoot the issue:
Click Tools -> Internet options.
Switch to the Security tab, click Local intranet, and then select Default level.
Switch to the Advanced tab, and click Restore advanced settings.
Temporarily disable third party add-ons. For detailed steps, please see the link below:
http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..
A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards. -
Can I save both DVD-R and DVD-Video files onto the same DVD?
Can I save both DVD-R and DVD-Video files onto the same DVD?
Hi Stan,
I just want the user to be able to run my video clips either on a
computer or on a standard DVD player. It would be nice to include both
formats on a single disc. I am new to this and am not sure what format
is most widely used for standard DVD players. Thanks for your response
and any guidance you can give me.
Quinn
Quoting Stan Jones <[email protected]>:
Stan Jones http://forums.adobe.com/people/Stan+Jones created the discussion
"Re: Can I save both DVD-R and DVD-Video files onto the same DVD?"
To view the discussion, visit:
http://forums.adobe.com/message/4996961#4996961 -
My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle
My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle
-
Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.
If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks -
installation of Flash stops after 30% complete, plugins and java are enabled in the browser and all browsers are closed.
Hi,
I'm assuming you're machine is OS X (please include this in the future, avoids assumptions). Are you using anti-virus software, if so, if you stop/exit the anti-virus software, does the installation proceed?
If not, or if the installation still does not proceed after stopping the anti-virus software, please try the offline installer, posted at the bottom of the Installation problems | Flash Player | Macpage, in the 'Still having problems' section.
Maria
Maybe you are looking for
-
Deploying EJB 3 session beans on OC4J 10.1.3.0.0 Standalone
Guys, I am unable to deploy any EJB 3.0 session beans on my freshly installed OC4J 10.1.3.0.0 instance. I also have tried to deploy the EAR created by the "Develop a Stateless Session Bean using EJB 3.0" to eliminate problems in the deployed archive,
-
Error message "VI is not executable"! Need help with Application Builder
Hello, I have a problem with an application, built with the Application Builder. I have read some threads about the problem I have, but I still don't know a solution. When I run my front panel from LabVIEW, everything is good. So, now I created an ap
-
Itunes wont sync apps to itouch
no matter what i do it wont sync them. ive closed and reopened itunes, reset my ipod twice, logged out of my account on both itunes and ipod and logged back on and still nothing.
-
How to make a HP Deskjet 1050 J410 work on a mac w/ Maverik 10.9.3
I have a 2 year old HP deskjet 1050 J410 and I changed laptop's corrently a mac w/ mavereik 10.9.3 os x, how can I make it work? Please. Pratas
-
Now with iCloud mail, do I delete my Mac and Me Mail accounts on my devices?
My computer and Iphone had email accounts for Mac mail and Mobileme (I think they are duplicates when mac changed to me and I just left them). Now with Icloud uploaded and configured for all my devices, it appears that both accounts are there but one