Displaying called number on destination phone

Hello,
We are using UCM + CCX 7. We are looking for a way to have the called number (or the digits passed for the called number) displayed on the recipient's IP phone -- for select extensions/agents -- versus showing the caller ID of the originator. For an individual phone, I've tried checking "Dialed Number" under Forwarded Call Information Display, but it still shows the caller ID instead. Does anyone know of a way to accomplish this, either through UCM or CCX?
Thanks

then you can have a look under call routing at Transformation Patterns => Called Transformation Pattern, create a CSS and PT for that apply it to the DevicePool of the Jabber phones.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide_chapter_0110000.html
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/7_0_1/ccmcfg/b03cldpt.pdf

Similar Messages

Don't display caller number

I configure AutoAttendant through call router and call handler in unity ,but the caller number can't display and it prompts "From Voicemail" on phone before the call is picked up.And after picking up it,the caller number is display normally . Why ?

Hi,
Assuming that you've set up the call transfer to be 'supervised transfer' this is the behavior you're going to see. When Unity puts the original caller on hold in order to call your phone, the two call legs aren't bridged together, so the call appears to CallManager to be a simple call from Unity. When you pick up the call, then Unity bridges the two legs together, and CallManager changes the caller ID to reflect the change. If you reconfigure Unity to use 'release to switch' then you will see half a second of the call being from Unity, but when it bridges the two legs together (while your phone is still ringing), CallManager will immediately change the readout.
When you choose 'release to switch', Unity will put the caller on hold, dial the user's number, and connect the two. So, the caller should hear a very brief moment of music on hold, then hear the ringback from the phone, etc. To get it so that there's MoH until the recipient answers, you'd have to go back to 'supervised transfer', which would break your Caller ID.
HTH
//G

E51 : How to Display Calling Number

Help :
How to Display the Calling Number along with Contact Number from the Address book when Receving Call from the number stored in the address book.
Eg :
Last Name : Z
First Name : A
Mobile : +1 12 123465789
Tel(Home) : +1 12 987654321
Tel(Office) : +1 12 192837645
Now say this above said Contact Stored in my address book
is calling on my cell phone.
It shows only
ZA
Calling
how to get the Number on display from which number the call is actually when it is ringing.
either the Call is from Mobile or Home or Office.
This feature is there in S60 v2 phones eg Nokia3230
Help please

As vmoisa said, this is a well known and a HIGHLY irritating bug. Here is a workaround - /discussions/board/message?board.id=communicators&thread.id=15956
Ofcourse, the correct solution would be a firmware upgrade.. I have seen this "mobile phone icon for all numbers" problem baffle new users (including me). It's a pity, because such a basic feature is implemented properly even on S40 phones!

5300 doesn`t display callers number

Hi I`ve just got a Nokia 5300 on an Orange contract and when I receive incoming calls it only displays "call" and not the phone number!!
Any ideas anyone, have been through the menus and can`t seem to find anything to change!!
Cheers

Check the fonebook memory to see if you have activated both fone memory and sim card memory.
Copy all contacts to fone and choose the fone memory option.
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Iphone 5s incoming call number displays incorrectly.

Whenever I call my wife's Iphone from work, the number displays incorrectly on her caller ID. It is always dropping the third number of the area code, so if my work number was 123-456-7890, then when I call her it shows up on her phone as 124-567-890, it doesn't even show a ten digit number. So far I have noticed that it only happens when I call her from the landlines at my work. I also have the exact same iphone 5s on the same carrier and the numbers display perfectly fine on my phone so I feel like it's some setting in the phone. Before switching to an iphone we had her contacts imported from an old Verizon flip phone, not sure if that has anything to do with it. Has anyone seen or heard of a similar issue?
Thanks,
Dan

By the way I have completely reset all content and settings several times, tried turning off international assist, tried several suggestions I found online dealing with the sim pin, switched to a different phone to have the same thing happen on that phone also. I have the same exact iphone 5s and carrier and service plan and the numbers appear perfectly on my phone. I'm so confused why this is happening.

SPA IP phones doesn't show calling number after the call was picked UP

Hello,
Our different CISCO SPA IP phones models (at this time we are using 7.4.8a version) are working with Broadsoft AS. And now we have a problem: when CISCO SPA IP PHONE pickups the call ( by pressing BLF lamp) and the call is connected, Cisco user doesn't see any information (calling name or calling number) with whom he is talking now. He on only sees on screen pickup extension *11 and info that the call is connected. From SIP traces I can see this information in PAI header in SIP 200 OK message (when pickup was initiated).
I also tried to change Caller ID Header - no luck. I've upgraded IP phone to latest version (7.5.1a) - didn't help.
I've experience with THOMSON and MGC. By pressing BLF , Thomson displays info who (calling number) is calling to your configured BLF line and gives you actions: retrieve this call or cancel - you can choose if you still want pickup this call.
So can you give me some hints how to fix this issue? Our at this time CISCO IP PHONE doesn't have such feature?
Thanks in advance,
Giedrius

Why not answer?
bug is available from firmware 7-4-7 and above and are still
on models SPA50x and SPA525

No Caller Number Display since August 2014

Caller number display ceased to function on 9th August last year.
Since the we have been through the fault reporting process 3 times. Had an aborted (by Openreach) engineer visit and received a statement letter from BT saying they are looking in to the problem, it will take time etc etc.
My equipment works at my neighbours house. The neighbours phone has been tried in my house and does not work. I have removed filters, unplugged everything, tried the Master Socket. None of these things works.
It is very tough to run my business without Caller Number Display.
Can it be fixed???
If I switch to another provider will Caller Number Display then work??
Help!

Hi Unclenorm,
Welcome to the community forum. I am sorry to hear that you are having problems with the Caller Display. I'll be able to take a look at this for you. Please can you send me in your details using the "Contact The Mods" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Caller ID - Displays Private Email Instead of Phon...

Displays Private Email Instead of Phone Number! - Why? How do I get the number to be displayed instead?

messages>receive at> change the caller id to phone number

Is there a phone number where I can call someone? The phone number in your web page is missing a num

Is there a phone number where I can call someone? The phone number in your web page is missing a number. it is listed as 1-800-426-570? One number missing. I just paid with my credit card online for photoshop and it is not allowing me to log in in order to download.

If I click on the adobe.ly link Rajshree gave you, above, there is a phone number at the bottom of the Customer Support contact webpage.
This is the number I see when logged in with an AdobeID associated with the US is:
800-833-6687
It is possible that you are somewhere else in the world and the webpage is smart enough to give a different phone number, so the number I see may or may not be applicable to where you are.
It also may be advisable to use the Chat instead of the phone, because it may be easier to understand what someone is typing than trying to interpret their English through whatever accent they are speaking with.

HT1937 activated phone on the 23 of Dec - phone works on outgoing call but the ported phone number is still inactive - do I need to call T-Mobil to turn off T-mobil?

When can I expect the phone to be opperatible for incoming calls with my ported phone number?

Sorry this isn't a live chat room. This is a user to user technical forum. Not all questions will be replied to promptly.
the issue your having is a carrier issue, you will need to call T-mobile to resolve your issue.

Using a landline number as displayed caller id

Is it possible to use a landline number as displayed caller id, instead of a mobile number?

Hi, cb10, and welcome to the Community,
Unfortunately, no. Skype does not have a means to verify a land line number.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Why is my phone calling number 1000?

It has made seveal calls to the number
I am unaware of these call yet I am being charged for them.
I am also unable to find out:-
1) Whose number it is.
2) Why the number is being called.
3) What exactly is calling the number ie which app.
I think I should be able to find out all these thing unless both the phone manufacturer and the telephone compnies are criminals (highly likely IMO).

Abi99 wrote:
I know. But in mobile network land (or world) this is not uncommon. Actually the rationale is about not to change the overall design of the bill. Customers then think about it and end contract. Or contact costumer support and ask ‘silly’ questions. Consequently, the manager thinks: Why spend money on something which might result in loosing money. Anyway, you have to discuss this with T-Mobile UK. Here, we cannot help you.
Ha ha but Tmobile has been losing customers left right and centre, naturally that is zero surprise to me.
I am surprise their customers have not bombed their head quarters, same goes for Nokia.
tmobile.
https://www.google.com/search?q=tmobile+losing+customers&ie=UTF-8#fp=bfd31e136490d2b7&newwindow=1&ps...
Nokia
https://www.google.com/search?q=nokia+losing+customers&ie=UTF-8
5 Reasons Why Nokia Lost Its Handset Sales Lead and Got Downgraded to ‘Junk’
http://www.wired.com/gadgetlab/2012/04/5-reasons-why-nokia-lost-its-handset-sales-lead-and-got-downg...
Both seem to be companies fraught with problems, seems both are stuck with useless management whose
"business plan" is to defraud mislead and rip off customers.
No wonder investors are worried, if you rip out all the dead and rotten wood, there is nothing left!!!! ha ha!!!
Back to me though, no more attempted call outs on my phone since I disablede the anti-virus.
Ona side note anti-viruses have twice turned my PC into a brick!
Could not boot up on one occasion!!! Eventually manged to cure it.
I think I would be better off witht he viruses, they have caused me far less problems than anti-virus software, and of course my phones 'anti-virus' is yet another example of that!!!
People who write viruses want your computer to work, and work well because if they do not the virus cannot spread!!!
I can imagine the first thing a virus does is fix all your computers problems and get it in tip top shape!!!

How to call other number its number did my phone number into blacklist? Please......May I know...

How to call other number its number did my phone number into blacklist? Please......May I know...

If someone somehow blacklisted your phone number, you would have to either call them from a number their phone will allow or get them to white list your number.

My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine.

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine. Any suggestions??

hens0861,
Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
KarenC_VZW
Follow us on Twitter @VZWSupport

Displaying called number on destination phone

Similar Messages

Maybe you are looking for