Displaying commas as per Indian Standards
Hi All,
I have a requirement like as follows.
In the purchase order the Total Value is coming like : 108,419.56 .
But i want to display the comma's in Indian format like : 1,08,419.56 .
How to overcome this issue
Regards
Manohar S N
Hi..! I have checked it, but in defaults i couldnt find the notation that i wanted.
all the notations available there are with "," or "." after every three digits.
But i required the format should be like the coma "," should initially appear after three digits and then with two digits respectively (1,15,000.00) or (10,15,000.00)
is this possilble....by any way..?
Regards
Manohar
Edited by: Manohar S N on Apr 26, 2010 1:48 PM
Similar Messages
-
Hi Guys, when iOS 6 coming as per indian standard time. Thanks in advance
Hi Guys,
When iOS 6 coming as per indian standard time. Thanks in advance
Thanks & regards
ParveeiOS 6 will be available on Wednesday September 19 in the U.S. the actual time is not known. Therefore there is no way anyone can know when it will be available in your local time zone. Best is to keep checking if you need it that fast.
Keep in mind that update servers will be under high demand and may not repnd propery. It might be best to wait a week before try to update. -
Cash Flow as per as per Indian GAAP
Hi,
I need to get a report of Cash Flow as per Indian GAAP in the system.Please suggest me where i can check this. Is there any standard report available for this?or is it possible to define in the system through Report painter fucntionality?
Please advise
BR,
Yadayya
Edited by: Dogdays on Aug 23, 2011 5:15 AMHi Danayya...!
Try with this report - Cash Flow (Direct Method) S_ALR_87012271
If you want to use Report painter kindly execute the report there you can find out the layout which is already available in ASAP. From there we can copy or wrt to we can create new Layout for cash flow.
Procedure:
Execute report with suitable data in the out put screen you can able to seen the Form display button.
Choose form button
002 Financial Statement Key Figures and
select " 0CZ-CASHF-02 Cash Flow:Cz.Rep NEW
I think above report will helpful to you as per Indian GAAP.
Rds,
@nil -
Displaying 10 records per page
hi,
somebody please help me.....
i have a list of more than 20 records which i get
from database and then i put it in session.
i have to display 10 records per page only and
on the same page i'd like to have links to page
numbers to view next set of records.
example is how googel displays its search results.
ex. [ 1 2 3 4 5 ]
THANKS A LOT!this can be done using the pagination technique.
[email protected] -
would you get a better picture on apple tv is you used airplay on an ipad mini with retina display as opposed to a standard ipad mini?
Welcome to the Apple Community.
It won't make any difference. -
Why does firefox display one word per sentence
firefox displays one word per sentence reading comments on www.zerohedge.com firefox is the only browser that does this Firefox has always done this reformat of the coments since day one why??
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Displaying leading spaces in a Standard Report Column
Is there a way to display leading spaces in a standard report column in APEX?
I am using the following hierarchy query to left pad the metric title with spaces to indent subordinate records. The problem is that the APEX report truncates the leading spaces when the data is displayed.
I have replaced the spaces with an underscore, however the end users prefers white spaces for readability.
Any help is greatly appreciated.
SELECT
t.group_id,
t.metric_id,
LPAD(' ',(LEVEL - 2)*5,' ') || d.metric_title metric_title,
d.business_unit,
get_name(d.data_owner) data_owner,
d.metric_status,
t.group_sort
FROM tbl_health_metric_groupings t JOIN tbl_health_metric_definition d ON t.metric_id = d.metric_id
WHERE t.group_id != 0
START WITH t.group_id = 0
CONNECT BY t.parent_group_id = PRIOR t.group_id
ORDER SIBLINGS BY t.group_sort, d.metric_titleThanks Tony your comment got me pointed in the right direction.
LPAD only pads a single character to the left so doing something like LPAD(' ',(LEVEL -2)*5,' ') does not produce the expected results however placing LPAD inside a replace function does...
The following works as expected and places leading spaces at the begining of the metric title based on the hierarchy:
SELECT
t.group_id,
t.metric_id,
replace(LPAD(' ',(LEVEL - 2)*5,' '),' ',' ') || d.metric_title metric_title,
d.business_unit,
get_name(d.data_owner) data_owner,
d.metric_status,
t.group_sort
FROM tbl_health_metric_groupings t JOIN tbl_health_metric_definition d ON t.metric_id = d.metric_id
WHERE t.group_id != 0
START WITH t.group_id = 0
CONNECT BY t.parent_group_id = PRIOR t.group_id
ORDER SIBLINGS BY t.group_sort, d.metric_title -
Disabling the display maximum rows per page
My project include many reports with table view, displaying 100 rows.
There is always arrows icon with the option to display maximum rows per page.
If user click on that option the OBIEE crashed, since there are a lot of rows.
I cannot decrese this number since all rows are required for other charts views.
a. Is there a way to set this parameter only for the table view?
b. Is there a way to disable this icon or not presenting it to the user?
c. Is there global way to coonfigure the default displayed rows number (e.g. from 100 to 20)?unfortunately, you are limited to the SRW built-ins in Reports as far as setting object properties is concerned. I have checked this with the Metalink staff and I did get an admission out of them that this is true.
You can set the property in the property palette, but I'm not sure that this helps you as I take it you have a condition you would like to implement. I wish I could help you further, but Reports is limited in some areas, and setting object properties programmatically is one of them. -
Hi All,
Please help me out in understanding below scenario.
If an employee changes from one company code to another code, how his/her YTD cumulates in CRT table as per SAP Standards.
Let me go with example to make a clear understanding.
Ex : Payroll has run for an employee upto payperiod 05. As per his pay assume that his /101 is 5000.
Monthly Yearly
PP 1 : 5000 5000
PP 2 : 5000 10000
PP 3 : 5000 15000
PP 4 : 5000 20000
PP 5 : 5000 25000
In PP 6 he has shifted from one company code to another company code. Now, how the system cumulates as per SAP standards ?
PP 6 : 5000 ?
Will the amount nullifies or else adds to previous PP5 ?
Thanks in Advance....Hi Ameet,
I understood the same. But my client is asking that the amount should nullify in CRT table for yearly when an employee changes company code.
And they have maintained different tax grouping for company codes in table v_t7ph0a. will that table makes any difference ?
Regards,
Nalini. -
Display comma for numeric values
Hi,
I want to display comma for numeric values.I know we can use strlen and concatenate, but any one can give me an example.
Ex: 1,234 and 12,234 , 1,22,500 ( iam expecting)
Thanks,
Veeruit depends on ur data...
if it is currency then u can use
WRITE.... CURRENCY...
if it is qty then u can use
WRITE....UNIT....
or u simply pass it to a packed field and it will take the default decimal settings of the user profile...
Reward points if helpful -
Display 20 records per page -- Pls help
I am using sql query which returns some 1000 records, i have to display 20 records per page. I am using an enterprise bean that has finder method which returns arraylist of records. From this arraylist i am displaying in the JSP page. If after selection, if other user updates in the database, This won't reflect in the jsp page. How should i go about?
oops,
Implementing a Data Cache using Readers And Writers
By Billy Newport, EJB Consultant
http://www.theserverside.com/resources/article.jsp?l=Readers-Writers
You may have come across a situation where you need to cache some data in your server. You then use this cache to service queries from incoming requests. You will also probably have a thread that listens for cache update events. This thread updates the cache in response to these events.
This leads to a problem as it's unlikely that both the threads servicing requests and the update thread will be able to use your cache simultaeneously. You may be tempted to use an exclusive lock such as a Java synchronised block to handle this. This will work but it is probably the worst way that you can do this from a performance perspective. This articles shows how you can use reader writer locks to accomplish the same thing using a much more efficient technique.
Reader writer locks.
How to detect changes to the database?
We can place triggers on a table. These triggers can call a stored procedure when-ever a record is updated/inserted or deleted. If we are caching the data in our application server then obviously when this happens we will want to know about it. We can split databases in to two categories when we look at implementing this. Oracle and everybody else.
Oracle 8i
Oracle is the most elegant. I'm assuming you're using Oracle 8i. Oracle 8i has a builtin JMS mechanism. We can define a queue in Oracle. Our pl/sql (or Java) stored procedure gets attached to the trigger. The stored procedure enqueues a message on the Oracle queue. The message would describe the event that happened. Our application servers will run a thread inside the application server VM that subscribe to and then listen to this queue. When a legacy system or an application server modifies the database then our triggers will call this stored procedure. It then enqueues the message. If the transaction is commited then the message is commited and sent to the listeners. If the transaction is rolled back then it is not commited and not sent. If the transaction is commited then all our application servers will receive the message. They can then use the message contents to see what happened and update the cache accordingly.
Oracle 8 includes a full JVM. You could as an alternative use a Java stored procedure to multicast the event or send the event any way you choose. This isn't possible using Sybase or DB2 as they don't include the java.net package in the VM inside the database.
If you're using an older version of Oracle then there is a way to send messages over an Oracle connection from the server to a client. Check your OCI manual for details. This message will be sent though regardless of the transaction outcome unlike the Oracle AQ solution. -
How to display 20 records per page in jsp
Hi All,
I have table contains 1000 records. How can i display 20 records per page using jsp.
can anyone help...hi, I am unable to use the ejb in my jsp page. Really? Then why not ask a question in the JSP or EJB forum?
I want
the output of my ejb in jsp page.
if possible please suggest me .Do you? Whats the output? What are you trying to do? Where's your code? What's the problem? Have you even bothered to read the tutorial?
>
thanxNo, thank you....
....for posting another non-sensical useless post in the wrong forum -
Restricting to Display 2 records per page simulteneously in Graph & Report
Hi
I am calling a column chart from Report using custom Query and I am mapping the Chart Column property in Report respectively to the chart.
The Repeating frame with respect to the Reports Records 'Max. records property' is set to 2. Hence the chart and the Report records are on the 3 pages as the Total records are 6.
But the chart is plotting all the 6 records even though the Report populates only 2 records per page. I require it to plot only respective records of the Report for that page in the chart not all the 6 records.
Pl. let me know how to Proceed
Thanks
Prakash H Lakshatha wrote:
i am doing small project in jsp there i have search engine
if you type anything into the search textbox( either number or character) and the search result should display 10 records per page and the 11th records should go to the next page.
i have 3 files i search data from the database through array list in servlet and forwarded to the jsp page .
in jsp page i require 3 buttons thery are print, next and previous.You need paging. Helpful Google keywords will be "paging", "pagination" in combination with "jsp". Try it.
In a nutshell: just remember 2 variables: the first row to be displayed and the row count to be displayed at once. Add at least 2 buttons which changes those variables. The Next button which increments the first row value with the row count value. The Previous button which decrements the first row value with the row count value. Fairly straightforward. If you unfortunately find it hard somehow, consider a 3rd party paging tag library, such as Displaytag. Google can find it either.
The print button can be just a plain dumb button with only Javascript's window.print() in its onclick attribute.
i am giving piece of code
if anybody knows please correct it or Almost nobody here is going to read an unformatted piece of code nor going to fix it. Use code tags and ask questions the smart way. -
Display data as per the fiscal year
Hi All,
Need a suggestion with formula building:
I have 2 columns, date which is the start of a fiscal year (04/01) and total cost next to it.
I want to display only that fiscal year and a total cost which falls in current fiscal year. Please let me know how would i create a formula so it reads the system date and displays the fiscal year and cost according.
Here is a sample of data:
Date Cost
04/01/2010 100$
04/01/2011 75$
So ideally my report should display only row 1 and when run after 04/01/11 ie after 2-3 days it should display row 2
Thanks!Thanks for your response Shastry, but I am having trouble understanding it. Not sure how the above steps will read the current date.
To be more specific, I want to display only that cost that falls in fiscal year.
In above example now since it is 03/26/2011 and my fiscal year starts on 04/01 . I want to display cost from row 1 and when the same report will be run after 04/01/2011 it should display cost from row 2.
Like wise if the report is run after n number of years , it should display cost as per the fiscal year at that time.
So i guess the formula should really depend on system date/current date/ print date
Thanks! -
i want to do one stuff....
i retrieved database data using below satement......
i want to display 20 records per page...and per page having two image of next and back..when i click to next ..it displays next 20 records...vice versa...
PreparedStatement sql = conn.prepareStatement("select * from pay_header");Hello abhit,
If you don't know how to use tag libraries, you can do it ur own.
Just take your data in a List or Vector.
Keep two hidden fields with the startIndex as 0 and endIndex as 20.
update this values as 20 and 40 respectively after first iteration.
Now for each button click prev or next ,update ur loop control values as such there in the hidden fields.
use while loop and a boolean variable to indicate backward or forward moving. ok
If you are using this approach and want to know how to more please let me know.
Enjoy.......
kuttus
Maybe you are looking for
-
You've Been Signed Out... please sign in to continue
When I open the desktop app and sign in, the app immediately pops up the message "You've Been Signed Out Please sign in to continue" I've read other posts about it and have followed steps provided to fix the issue. Nothing has worked. HELP ME TOM CRU
-
Report linking Delivery , Receipts , Purchase Return & Sales Return Entry
We have Service Contract for Supplying Inventory to Our Indirect Customer. For Example:We have signed service contract with IBM whose customer is Bank of India, now once Bank of India logs any complaint call to IBM for faulty part, IBM ask us to sup
-
EBP Punch-Out returns info in external window
Hi All, I am Handling the Supplier integration portion of an SRM EBP project. We are encountering an issue with the Supplier's external catalogs, where we can reach the external site, select items into a shoppingcart, and complete the order. However
-
Time machine has deleted all old backups - I think
Dear All, Time machine failed tonight. It said there wasn't enough disk space (2TB external drive). I went into time machine and all the backups bar one from this morning are gone. One thing that did happen today was that I ran disk utility on HD1 an
-
Problems with Mozilla and ContextMenu
Hello Friends, I am working in Flash cs3. I am having problems with mozilla related to contextMenu. Using contextMenu, i removed all BuiltInItems. Its working fine in IE. when i am viewing the same html file in mozilla, "Show Redraw Regions" option i