Displaying data from one data set when a field is null in other data set

Hi All,
I have a report where I need to show some columns from one data set(Ex: SsOpportunity) ....... when there is no data in a column (Ex: "Petrofac-ProductLine") in other data set (Ex: SsRevenue) in one table. I have another table which shows data from SsRevenue when there some data in "Petrofac-ProductLine" column.
The first table is not working for me. Kindly suggest me where to specify the condition.
Thanks in advance,
Imtiaz.

Will it be possible for you to send me a sample xml and RTF?

Similar Messages

Return the scheduled start date from one task to a custom field for all tasks

Hi all
I am trying populate an entire custom task date field with the scheduled start date of one of the tasks. I thought the easiest way would be to:
1) identify the date I need with a custom task flag field set to 'yes'
2) create a formula to look for the 'yes' flag in that field and populate the custom task date field with it.
This worked only for the task where the flag was set to yes (task #36) and the rest of the 49 tasks returned an error message. I'm unsure of how to set this up so that the date with the 'yes' flag populates in this column on
all 50 tasks.
This would also need to scale for situations where there were more or less than 50 tasks.
Thanks in advance...
Using MSP 2010 Pro

ShelleyBrodie,
That's because the syntax of your formula isn't quite what you intend. The correct syntax is:
IIf( expression, truepart, falsepart )
For your case that converts to:
IIf([Flag1],[Scheduled Start],{not sure what you want for the false part but I assume is is not Scheduled Start})
Note, the "Yes" for Flag1 is implied, so the first part (i.e. Scheduled Start) is the truepart, but you don't give a value for the falsepart (i.e in both cases your formula is looking for Flag1 to be "yes". Let's say you want the Date1
field to have the Scheduled Start date if Flag1 is "yes" and to have today's date if Flag1 is "no". Then the formula will be:
IIf([Flag1],[Scheduled Start],[Current Date])
However, As I indicated in my previous response, you won't be able to do what you described in your initial post by using a formula. Are you now trying to do something different?
John

Pass data from one web application to another web application

Hi,
Please provide suggestion for following scenario:
Scenario: Basically the aim is to transfer large amount of data from one application to another and display JSP of second application.
User enteres data on a JSP of one web application. When he submits that data, another web application opens in new window and data from first application should be passed to this second web application. Another web application will display that data on its own JSP. User can perform whatever he wants on second application screen.
Possible solutions:
1) response.sendRedirect(): This makes GET request. But, there is large data to send. So, GET is not effective.
2) forward(request, response): Can't use as I have to pass data to different application that is in another context.
3) URLConnection: Here, I can make POST request and set attributes in HTTP request and make connection to another application. I can pass data using output stream. But, I can't display second application JSP to user even if I use input stream to read response. Because control will be ultimately in first application only.
Is there any othe method to achieve this or any of the above options extendable?
Please give your inputs.

Hi,
According to your post, my understanding is that you want to migrate list data from one web application to another.
We can migrate list data programmatically, there are some articles for your reference.
http://blogs.msdn.com/b/tejasr/archive/2007/11/12/code-snippet-copy-list-data-between-sites-programmatically.aspx
http://www.fivenumber.com/copy-sharepoint-list-items-from-one-site-to-another-programmatically/
http://geekswithblogs.net/AnneBougie/archive/2009/01/23/copy-a-sharepoint-list.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

ABAP Function Module Example to move data from one Cube into Another

Hi experts,
Can any please help out in this ..?
A Simple ABAP Function Module Example to move data from one Cube into Another Cube
(How do i send the data from one client to another client using Function moduel).
Thanks
-Upen.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again, BI related? ("cube"), also search for information before asking.
Edited by: Thomas Zloch on Oct 29, 2010 1:19 PM

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

How to pass data from one internal session to another internal session

hi all sap experts ,
How to pass data from one internal session to another internal session and from oneExternal session to another external session.
Except : Import and Export parameters and SPA/GPA parameters.
Tell me the otherWay to pass data ..
Plz
Thanks in advance

hi,
abap memory management u will understand about this concept.
the import /export parameter will help u that passing data between two internal sessions by using abap memory.
for syntax
Passing Data Between Programs
There are two ways of passing data to a called program:
Passing Data Using Internal Memory Areas
There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
ABAP Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
Filling Input Fields on an Initial Screen
Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
Filling the Selection Screen of a Called Program
You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
Message was edited by:
sunil kumar
Message was edited by:
sunil kumar

Loading Data from one Cube into another Cube

Hi Guys,
I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
Thanks in advance

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

Report to display (actuals data from one cube and plan from another)

Hi Gurus,
         I have a requirement in reporting to display actual data from one cube and plan data from a different one.
        The example below might give a clear picture of the requirement.
rows has key figures and columns = months
Jan | Feb | Mar | Apr | May | Jun ...   ....
GrossSales
Net Sales
Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
Similarly when i run the report next month(may),
then (data for Jan, Feb, Mar, Apr from CUBE1)
and ( May thru Dec from CUBE2)
Any suggestions.
Thanks in Advance
Kumar

Hi Henry,
     We alreadey have a multi provider which includes
FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
So you suggest that we have two versions of key figure for actual and plan.
ie. each KF will have two versions.
actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
eg:
Jan | Feb | Mar | Apr | May | Jun ...
GrossSales(Act)
GrossSlaes(Plan)
Net Sales(Acutal)
Net Sales(Plan)
Correct me if I am wrong.
the report has a lot of key figures, having two versions for each kf will be confusing.
the user would like to see
Jan.....| ...Feb |..Mar |..Apr.....| May |
GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
Net Sales
where Act.Value is from CUBE1
         Plan Value is from CUBE2
Thanks
Kumar

How do I transfer data from one time capsule to new time capsule when TC backs up an iMac and Power Book

How do I transfer data from one time capsule to new time capsule when TC backs up an iMac and MacBookPro

It is generally better to leave the old backups and start again.. unless there is something you particularly need.
But if you desperately want all the old backups you have to copy the sparse bundles.. this will take very long time as it must copy via the computer..
http://pondini.org/TM/18.html
Take particular note of the initial comments.. ie before you read how to do it.. don't do it.

I am trying to log data from 4 voltage input signal using labview, but when i use DAQ assistant i am able to log data from one signal at a time only.

I am trying to log data from 4 voltage input signal using labview, but when i use DAQ assiatant i am able to log data from one signal at a time only.I am trying to get all 4 input data to logged in a single file againt time. I am new to Labview, I need to sample this data within a couple of days can someone help please.

Naveen
Check out the info in the Analog Input section of the document linked below. (Ignore the part about Global Channels.) In Figure 5, notice that you can select multiple channels while holding <Ctrl> or <Shift>.
Developer Zone Tutorial: NI-DAQmx Express VI Tutorial
Kyle B | Product Support Engineer | ni.com/support

Hi experts, how to use open sql to read data from one " maintenance view"?

i want to use this part of data within report ,so how to use open sql statement to read data from one " maintenance view"?

Hi
You can't use OPEN SQl statements to fetch data from maintenance view
You have to use only Database views
see the different types of views and the difference
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Reward points for useful Answers
Regards
Anji

Need help in passing data from one page to other page in oaf

Dear All,
I have a requirement as below.
I am doing some selection in one page and populating the data in another page table region, next time when i am selecting another row and pressing the button i need to display the previous row as well as new row, how can i achieve this, currently i am able to see only the first row what i selected first.
Ex: 1 st scenario: after passing the selected data from one page to base page the data looks like below in base page.
1 test desc
2nd scenarios: when i am again selcting data and passing to the base page it should be like that
1 test desc
2 test desc
but currently it is showing
1 test desc only for the 2nd case, can any one please help me on thsi , its little bit urgent
Thnaks

How are you passing the values to the base page? Are you using setting the retainAM parameter to true while doing a forward.

How can I Move data from one column to another in my access table?

I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
I understand how to drop a column or add a column, how do I transfer data from one column to another.
Here is my trial code:
<cfquery name="qQueryChangeColumnName" datasource="#dsn#">
ALTER TABLE leaderboard
UPDATE leaderboard SET points2 = points3
</cfquery>
Unfortunately, I get the following error:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
How can I transfer my data with the alter table method?

I looked up the Access SQL reference (which is probably a
good place to start when having issues with Access SQL), and
it suggests you probably need a WHERE clause in there.
I agree the documentation is a good place to start. But you should not need a WHERE clause here.
Too few parameters. Expected 1.
If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message..

Insert old missing data from one table to another(databaase trigger)

Hello,
i want to do two things
1)I want to insert old missing data from one table to another through a database trigger but it can't be executed that way i don't know what should i do in case of replacing old data in table_1 into table_2
2)what should i use :NEW. OR :OLD. instead.
3) what should i do if i have records exising between the two dates
i want to surpress the existing records.
the following code is what i have but no effect occured.
CREATE OR REPLACE TRIGGER ATTENDANCEE_FOLLOWS
AFTER INSERT ON ACCESSLOG
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
V_COUNT       NUMBER(2);
V_TIME_OUT    DATE;
V_DATE_IN     DATE;
V_DATE_OUT    DATE;
V_TIME_IN     DATE;
V_ATT_FLAG    VARCHAR2(3);
V_EMP_ID      NUMBER(11);
CURSOR EMP_FOLLOWS IS
SELECT   EMPLOYEEID , LOGDATE , LOGTIME , INOUT
FROM     ACCESSLOG
WHERE    LOGDATE
BETWEEN TO_DATE('18/12/2008','dd/mm/rrrr')
AND      TO_DATE('19/12/2008','dd/mm/rrrr');
BEGIN
FOR EMP IN EMP_FOLLOWS LOOP
SELECT COUNT(*)
INTO V_COUNT
FROM EMP_ATTENDANCEE
WHERE EMP_ID    = EMP.EMPLOYEEID
AND    DATE_IN   = EMP.LOGDATE
AND    ATT_FLAG = 'I';
IF V_COUNT = 0 THEN
INSERT INTO EMP_ATTENDANCEE (EMP_ID, DATE_IN ,DATE_OUT
                            ,TIME_IN ,TIME_OUT,ATT_FLAG)
     VALUES (TO_NUMBER(TO_CHAR(:NEW.employeeid,99999)),
             TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'),       -- DATE_IN
             NULL,
             TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'),      -- TIME_IN
             NULL ,'I');
ELSIF   V_COUNT > 0 THEN
UPDATE EMP_ATTENDANCEE
    SET DATE_OUT       = TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_OUT,
        TIME_OUT       =   TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_OUT
        ATT_FLAG       =   'O'
        WHERE EMP_ID   =   TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
        AND   DATE_IN <= (SELECT MAX (DATE_IN )
                           FROM EMP_ATTENDANCEE
                           WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
                           AND   DATE_OUT IS NULL
                           AND   TIME_OUT IS NULL )
AND   DATE_OUT IS NULL
AND   TIME_OUT IS NULL ;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN RAISE;
END ATTENDANCEE_FOLLOWS ;
                        Regards,
Abdetu..

INSERT INTO SALES_MASTER
   ( NO
   , Name
   , PINCODE )
   SELECT SALESMANNO
        , SALESMANNAME
        , PINCODE
     FROM SALESMAN_MASTER;Regards,
Christian Balz

Displaying data from one data set when a field is null in other data set

Similar Messages

Maybe you are looking for