Displaying differences between topic versions

I need to be able to show what was changed in a Topic and the
previous version for an audit. Currently Version Control will show
each version using the Truecode. I will be showing the difference
to non technical people so I would like to show each version of the
Topic in an HTML format. Is this possible or do you have any
alternatives?

Using RoboSource Control Explorer, you can perform a 'Get'
for any version of a topic from its History. This gives you a local
copy of this version, which can be displayed in a browser.
Two things to keep in mind:
- Make sure that you don't overwrite the topic in your local
project folder.
- Make sure to copy other needed files (style sheets,
javascripts, etc.) as well.
Greetings
----Dirk Bock

Similar Messages

Difference Between Current version & All Version in DMS in Material Master

Hello All
Could any one tell me the Difference between Current Version & All version of DMS in Material Master (in /MM02 transaction)Additional Data tab where Documents are attached in Document Data Tab.
I am unable to see all Documents in "current Version" which are attached in "All Version" option in /MM02 transaction Additional Data Tab in Document Data.
How to display all DMS in current version which I can see in all version? Is there any configuration available in DMS?
Thanks in Advance.
Waiting for your valuable reply.

Hi,
01) I have attached the 02 DOCs at atime in material Master additional Data tab in all version option. First Doc type is ZDR & 02nd is ZTS and save my entries.
02) Then I go to /MM02 Transaction ..So which Doc type will appeared in current version.
   In current version you will see 2 entries as below
Doc type                                                                Version
   ZDR     <Mat number>        000     00
   ZTS     <MAt number>     000     00
03) 03rd step When I go to /MM02 transaction & attached 03rd same ZTS doc type doc whether this doc can be dipsly in current version or not after saving my entry.
     In current version you will see following entries
Doc type                                                                Version
   ZDR     <Mat number>        000     00
   ZTS     <MAt number>     000     01
04) If I go to /MM02 transaction & attached 04th Doc (Doc type is ZAC) & save my entry. Can I see this Doc in current version when I once again go to /MM transaction.
     In current version you will see the following entries.
Doc type                                                                Version
   ZDR     <Mat number>        000     00
   ZTS     <MAt number>     000     01
   ZAC           <Mat Number>                    000               00
Regards,
Deepak Kori

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

Differences between different versions of BW 2.1C,3.0A and 3.5

Can anybody tell me the differences between different versions of BW.
I m new to SAP BW,i directly learned in BI7.0.So please anybody let me know the difference in implementation of features in 2.1C, 3.0A ,3.5 ,if possible BI7.0 also

please read this:
http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm

CE 7.1 Trial - Differences between the versions

Hi there,
I would like to check out the new BPM Feature within the NetWeaver CE, but I'm a little confused about all the different versions available. There is a CE 7.1 Trial SP 3, CE 7.1 Trial SP 5 and a CE 7.1 Trial EHP 1...
Whats the current Version and what are the differences between the Version?
Does anyone know if ther will be a 64 Bit Version available soon?
EDIT:
Another question just occurred to me.... The installation guide says the system requirement is Windows XP SP2 (or higher). Does anyone have experience using the Trial with Windows 2008 (32bit)?
thx in advance
Matthias
Edited by: Matthias Siegmund on Jan 5, 2010 11:07 AM

Yes of course :
CE 7.1.1 samples in SDN
SAP NetWeaver Composition Environment Samples Center
There is also some samples in the ES Workplace.
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DEE98D07DF9FA9F1B3C7001A64D3F462&id=887E07910E364A239B6681699AC3A540
Regards,
Gilles.
There is a server version of CE, this version should work on WS 2008 64 bits.

Difference between Flashback Versions Query vs Flashback Transaction Query

plz somebody can clearly tell me difference between
--Flashback Versions Query
--Flashback Transaction Query

Hi,
I was able to test the data given by you
CREATE TABLE test1(a number);
INSERT INTO test1 values(1);
INSERT INTO test1 values(3);
COMMIT;
UPDATE test1 SET a=10 WHERE a=1;
COMMIT;
ALTEr TABLE test1 ENABLE ROW MOVEMENT;
INSERT INTO test1 values(1);
INSERT INTO test1 values(3);
COMMIT;
ALTEr TABLE test1 ENABLE ROW MOVEMENT;
SELECT * FROM test1 VERSIONS BETWEEN TIMESTAMP
TO_TIMESTAMP('2011-07-25 15:50:00', 'YYYY-MM-DD HH24:MI:SS') AND
TO_TIMESTAMP('2011-07-25 15:56:00', 'YYYY-MM-DD HH24:MI:SS');
A
3
1
10
3
I didnt get any error. Please check again.

Differences between ABAP versions

Hi all,
I need help about Differences between ABAP versions. plz help me where i can get it.

hi,
check this links
http://www.sapdesignguild.org/resources/r3_history.asp
http://www.sapdesignguild.org/resources/web_history.asp
http://ifr.sap.com/index.html
http://www.sap.info/index.php4?ACTION=noframe&url=http://www.sap.info/public/en/article.php4/Article-187163df9cbccc5273/en
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
cheers,
sasi

Differences between WRT54G versions

Dear all,
What are the differences between different version of WRT54G? eg, v1.0, v2.0, V3.0... V8.0, etc
thanks.
Solved!
Go to Solution.

See wikipedia for details.

Want to display difference between two datetimes

I want to display difference between time in the below format
for example for below two dates
select to_date('02-feb-2011 23:55:55','dd-mon-yyyy hh24:mi:ss') date1 , to_date('03-feb-2011 00:35:00','dd-mon-yyyy hh24:mi:ss') date2 from dual;
00:45:05
Edited by: Sun Vth Oracle on Feb 9, 2011 2:09 AM

00:45:05Really?
I get:
SQL> with t as (
2 select to_date('02-feb-2011 23:55:55','dd-mon-yyyy hh24:mi:ss') date1
3 ,      to_date('03-feb-2011 00:35:00','dd-mon-yyyy hh24:mi:ss') date2
4 from   dual
5 )
6 --
7 --
8 --
9 select numtodsinterval(date2 - date1, 'day')
10 ,      substr(numtodsinterval(date2 - date1, 'day'), 12, 8 )
11 from   t;
NUMTODSINTERVAL(DATE2-DATE1,'DAY')                                          SUBSTR(N
+000000000 00:39:04.999999999                                               00:39:04

Satellite L670-1JN - Difference between BIOS versions

My laptop L670-1JN bios version is 1.9, on download there is bios "2.10-WIN".
What's the differences between the versions?
Is it necesserary to update my bios?

Hi Merivel,
If everything is ok with your notebook I dont see a reason to update the BIOS.
But on Toshiba website I found an article about keyboard issues which could be solved by new BIOS version:
http://aps2.toshiba-tro.de/kb0/TSB1103370000R02.htm
So probably thats the difference to older BIOS version

Can anyone tell me the major differences between the versions

hi all,
what is the difference between the versions 4.6c 4.7EE and 5.0.
Atleast anyone suggest where i can get the difference exactly.
Thanks,
Saroja.

<b>Difference between SAP 4.6b, 4.6c, 4.7e and ECC 5.0 Versions</b>
If you are an existing user of SAP, you will probably be aware that as from January 2007 all releases below 4.6c will no longer officially be supported by SAP. Maintenance costs for releases 3.1 - 4.6b inclusive will also attract a total charge of 21% during 2005/6.
So what are your upgrade options?
You could upgrade to release 4.6c - or the more comprehensive mySAP.com - which are both currently scheduled to be supported by SAP until December 2009. These products have been available since 1999 and already have a broad user base. Bear in mind however that maintenance costs for this release will be 19% during 2007 and 21% during 2008/9.
If you wish to avoid the expense and disruption of a potential further upgrade in 2006/7, you may want to consider upgrading to release 4.7 (SAP R/3 Enterprise). Whilst this product incorporates relatively new technology, it has the advantage of being supported by SAP until March 2012 and provides new functionality in many areas.
SAP is encouraging existing users to go beyond the 4.7 (SAP R/3 Enterprise) environment and upgrade to mySAP ERP as a stepping stone to mySAP Business Suite. However, you should note that an upgrade to mySAP ERP requires a change in licensing plan. mySAP ERP licences are role-based, so you need to assess the number of finance, logistics, HR users etc. and pay accordingly. This is a radical change from previous licensing schemes operated by SAP, whereby each seat purchased was accorded full usage of the entire SAP environment (in line with user authorisations).
No technology upgrade is necessary to move from 4.7 (SAP R/3 Enterprise) to mySAP ERP. You simply add the benefits of mySAP ERP to your installation as you go along. The upgrade from mySAP ERP to mySAP Business Suite is equally straightforward you just add those mySAP products available in the latter that you require. The alternative strategy would be to remain on 4.7 (SAP R/3 Enterprise) or mySAP ERP and purchase mySAP products available with mySAP Business Suite as add-ons.
Please see below the current maintenance schedule for SAP products:
SAP R/3 3.1 - 4.6b
Maintenance extension until December 2006
2005/2006: additional fee of 4% (17% plus 4%)
SAP R/3 4.6c
Maintenance extension until December 2009
2007: additional fee of 2% (17% plus 2%)
2008/2009: additional fee of 4% (17% plus 4%)
SAP R/3 Enterprise:
Maintenance extension possible until March 2012, available to all customers
April 1, 2009 - March 31,2010: additional fee of 2% (17% plus 2%)
April 1, 2010 - March 31, 2012: additional fee of 4% (17% plus 4%)
MySAP ERP 2003
Mainstream maintenance until end of March 2009
April 1, 2009 - March 31,2010: additional fee of 2% (17% plus 2%)
April 1, 2010 - March 31, 2012: additional fee of 4% (17% plus 4%)
MySAP ERP 2004
Mainstream maintenance until end of March 2010
April 1, 2010 - March 31, 2011: additional fee of 2% (17 plus 2%)
April 1, 2012 - March 31, 2014: additional fee of 4% (17 plus 4%)
All of the above maintenance durations and extensions include all industry add-ons and all legal charges for HR and FI/LO.
If you are contained in say Financials and HR - then your burden to go to mySAP ERP is smaller - as you go from one system to another system.... on the opposite - if you use R/3 and use customer processes, manufacturing and purchasing processes - and you do not use yet mySAP CRM, mySAP SCM, mySAP SRM... then you not only have to pay more for the license - not only for mySAP ERP - but also for mySAP CRM, mySAP SRM, mySAP SCM... - the mySAP Business Suite may be interesting pricing option then...
But then to pricing - SAP says they will reduce the credit on your R/3 payments with the change of the calendar year... for some a big motivation to move to mySAP ERP license... but as a Gartner report from today pointed out - not many of these customers really upgrade to mySAP ERP in terms of functionality - but use it more as a license centralization for some instance consolidation - as well as only a technical upgrade. And then there are the many SAP customers who buy mySAP ERP - but stay on R/3 - but get this as they buy the mySAP BW license for all their users with it... and it's cheaper to buy mySAP ERP (as you need it sooner or later anyway) - than buying mySAP BW standalone now - and mySAP ERP in a few years...
One final argument... remember when mySAP ERP shipped first - March 2003. SAP said they would have the vertical code of R/3 by end of 2003... well they had not - all of it will be out only now in Q2 2006 with mySAP ERP 2005 --- three years later! How did SAP's world class engineering team miss dates so badly? It's tough to move working R/3 code over to the mySAP xxx world with NetWeaver! And no the secret: Is there a difference between you modifying a R/3 system -- and SAP development creating a vertical piece of code? Not really - or better - not at all... so have a very good luck at your modification...
Finally - there are some tools in the market which have a very good handle on estimating the implementation cost... take a look at them.
Bottom line: If you are using a lot of R/3 - you have major license cost and a major risk to upgrade... you should even look at alternatives to SAP then - as you spend as much in upgrading than switching... take advantage of some of the attractive commercial offerings from SAP competitors - even if you do this only to negotiate a better price from SAP.
If you are using a little R/3 only - and that is contained in mySAP ERP... then it comes back to how much license you want to pay now (or later - so it's really a financial consideration) - and your overall risk readiness. If you are happy to pay now and risk averse - you go for mySAP ERP 2004 or 2005... if you are risk sensitive and don't want to pay now and wait for others to be the "guinea pigs" for mySAP ERP 2007 / 2005 etc - then you go to R/3 Enterprise. Easier upgrade, no license cost. Sit on the fence and see what SAP and competitors do to service enable their apps.
Hope this helps a bit...

Difference between Hyperion version 11.1.1.3 and epm 11.1.2.1

Hi,
Can anybody suggest me the difference between Hyperion version 11.1.1.3 and EPM 11.1.2.1?
Thanks In Advance

Take a look at the “Installation and Configuration Guide.”
log file..start the server and see the log file
The 11.1.2.1 release also includes new features for upgrading from previous versions. There are several new utilities and enhancements to make the upgrade process easier. You will see some of these new features during the configuration of the various products
Apart from diffrance
Ima not sure y Windows 2008 support in Hyperion 11.1.2 brought with it a host of new challenges..(atleast to make copyrighted windows copys now onwards lol)
Windows 2008 introduced a new feature called User Access Control (UAC). while installing person need to have admin privillage other wise it HELL (nightmare ) and some unexpectedly problematic issues though security is good but .................
Have a read on this
oracle-hyperion-epm-system-certific-131801.xls(google u will get it) at least u get some idea what are new hardware req and software reqs
Some Support answers as well
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=TROUBLESHOOTING&id=1313155.1#aref3
hope u get some idea

Functional transactional difference between SAP version 4.7 and ECC 6.0

Hi Experts,
Can you Pls tell the Functional transactional difference between SAP version 4.7 and ECC 6.0 in case of Sales and Distribution module.
Like VA05n is one transactional difference,Pls tell the others?
Regards,
Rohan

Hi,
there are lot of changes like i observe
1, in rebates there is no advanced rebate processing in 4.7
2. there is no scale group field in condrecords of agrement in rebate agreement.
3. there are lot of new reports available in SIS
4. in sales returns process also seperate config available in 6.0
regards,
sk

Difference between SAP version 4.7EE and ECC 6.0.

Hi All,
Could you please tell me the major difference between SAP version 4.7EE and ECC 6.0? Also let me know why the industries should go for ECC 6.0?
Waiting for an early response from you.
Thanks a lot in advance!

http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Please use above mentioned link, you will find the delta functionalities between various SAP Versions.
Regards,
Ravi

What is difference between Oracle version and DB version.

What is the difference between Oracle version and DB Version?
How we came to know about the installed version through SQL query.

SQL> select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
PL/SQL Release 8.1.7.0.0 - Production
CORE 8.1.7.0.0 Production
TNS for Linux: Version 8.1.7.0.0 - Development
NLSRTL Version 3.4.1.0.0 - Production
SQL>
Joel P�rez

Displaying differences between topic versions

Similar Messages

Maybe you are looking for