Displaying disk geometry on a disk bigger tha 1 TB

I have a raid that has a lun that is 1.94TB and I need the solaris format utility to display the geometry information (cyl/hd/sec). I am running the latest release Solaris 9. The reason that I need the geometry to show up is that the load balancing software that I am using on the 2 fiber HBA's need to see that information. How can I make that happen. It seems that any size smaller than 1TB shows the geometry just fine.
Any help is greatly appreciated,
Thanks

I have a number of RAID volumes sharing the same drive.
Disk Utility can be fussy and may need to quit/launch or restart but, creating your partitions first, so they will be identical and match, on matched drives, then drag into the RAID window.
Watch out though, that RAID window uses and remembers the prior set, which is why quit/launch Disk Utility or try opening another DU window.
I use stripped volumes but have used mirrors, or stripe and mirrors. Just be sure that it 'works' and won't be causing problems hitting both concurrently or something or interfering or slowing down performance.
SoftRAID makes it easier to setup multiple volumes and RAID.
And you can have half your drives in RAID (say photoshop stripe) and still have normal standard volumes for the remaining half.

Similar Messages

Continuously displaying "Disk Mode" and "OK to disconnect"

My Nano is Continuously displaying "Disk Mode" and "OK to disconnect" and I am not able to play or do anything. Could some one help me.
THanks,
Krishna

Have you tried to reset it?
http://docs.info.apple.com/article.html?artnum=61705

Macbook Pro Retina Display Disk is locked

Hi,
I have a macbook pro retina display with mountain lion 10.8.1.
Today I shutdown my machine and now when I try to turn it on it goes to a progress bar and spinning and it just turns off itself. I have tried recovery mode and it turns out the disk needs repair and after repair it says it can't be repaired and it should be reformat again. I've tried safe mode but it keeps doing the progress bar and spinning and it turns off again.
I don't know what happened to the machine it was on my desk all the time and it has flash storage so no failing in hard disk and bad sector.
What should I do? (I don't have a external hard drive with GUID to install ML on it and see if I can open my Macintosh HD. And I don't have a Time Machine backup).

Do you have any backups? If the answer is no, you've quite possibly lost all your data.

FCS v3.0 installer doesn't display disks - why?

Hi there,
I'm trying to install a brand new FCP v3.0 Retail package onto a PowerMac Quad-Core intel xeon running OS X 10.5.7.
there are hundreds of gigs of available space.
The installer 'stalls out' when it reaches the Select an installation drive stage. The installer isn't showing any drives at all.
am I missing something obvious?

Well first off I would start by ejecting & unplugging any external drives (IE Ext. HDD, CD/DVD/BD -R/RW, Card Readers CF, SD, XD, MS). Then I would make sure that the only application that is running is The Final Cut Installer from the DVD-ROM disk. If you still have issues when the installation section appears your system has a bigger issue and needs to have its internal HDD diagnosed.

My Ipod Nano is frozen and displaying disk mode !!please help!!

My Ipod nano is displaying a huge check mark and it says "ok to disconnect". It is also locked in disk mode. It isnt charging or responding to any buttons I press. How do I exit the disk mode? Will someone please help me?

Reset your iPod: hold the "menu" and "select" (center) buttons together for 7 seconds. Then the Apple logo will appear on screen. This should exit your iPod out of disk mode.
-Kylene

OS 10.9.4 slow to load and display disk folders?

I was wondering if any of you veterans can help me with my headache. I disabled all the antivirus software, but it's still taking forever to see all the folders and volumes on the desktop. I did a Etrecheck. Thank you.
Here are the results:
EtreCheck version: 1.9.12 (48)
Report generated July 21, 2014 at 8:38:56 PM PDT
Hardware Information:
iMac (27-inch, Late 2012) (Verified)
iMac - model: iMac13,2
1 2.9 GHz Intel Core i5 CPU: 4 cores
24 GB RAM
Video Information:
NVIDIA GeForce GTX 660M - VRAM: 512 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 3:22:1
Disk Information:
APPLE HDD ST1000DM003 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 949.35 GB (630.13 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 50 GB (3.13 GB free)
USB Information:
Seagate Backup+ Desk Mac 3 TB
disk1s1 (disk1s1) <not mounted>: 209.7 MB
Seagate Backup Plus Drive (disk1s2) /Volumes/Seagate Backup Plus Drive: 3 TB (2.02 TB free)
VIA Labs, Inc. USB3.0 Hub
VIA Labs, Inc. USB3.0 Hub
VIA Labs, Inc. USB2.0 Hub
VIA Labs, Inc. USB2.0 Hub
FUJITSU ScanSnap S1300
Fitbit Inc. Fitbit Base Station
TSSTcorp USB Mass Storage Device
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] com.LaCie.ScsiType00 (1.5.1 - SDK 10.5) Support
[loaded] com.cisco.kext.acsock (1.1.0 - SDK 10.6) Support
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) Support
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) Support
[not loaded] com.elgato.eyetv.ClassicNotSeizeDriver (1.1.2) Support
[not loaded] com.lacie.driver.mvumi (1.3.12 - SDK 10.9) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) Support
[loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) Support
[not loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f2 - SDK 10.6) Support
[not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
Startup Items:
ciscod: Path: /System/Library/StartupItems/ciscod
MSUService: Path: /Library/StartupItems/MSUService
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.intego.BackupManagerPro.daemon.plist Support
[failed] com.lacie.LaCieDesktopManagerDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid] com.oracle.java.Helper-Tool.plist
[loaded] com.sharpcast.xfsmond.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] net.openvpn.client.plist Support
Launch Agents:
[running] com.brother.LOGINserver.plist Support
[loaded] com.cisco.anyconnect.gui.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.intego.backupmanagerpro.agent.plist Support
[failed] com.lacie.LaCieDesktopManagerAgent.plist Support
[invalid] com.oracle.java.Java-Updater.plist
[running] com.symantec.uiagent.application.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.apple.SafariBookmarksSyncer.plist
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
Skype
ScanSnap Manager
EyeTV Helper
AdobeResourceSynchronizer
Google Drive
AdobeResourceSynchronizer
Dropbox
Fitbit Connect Menubar Helper
Amazon Cloud Drive
Boingo Wi-Finder
SugarSync
PandaPow
InstUtilLaunch
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.2.18903 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.2.6 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 3.0.50106.0 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.9 Support
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.7 Check version
Safari Extensions:
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx: Version: 1.0 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 Support
Stamps.com: Version: 1.1.12 Support
aliedit: Version: 1.0.0.5 - SDK 10.7 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
Symantec QuickMenu Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 884.15 GB Disk used: 297.29 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 99
Oldest backup: 2012-11-25 07:47:32 +0000
Last backup: 2014-07-22 01:03:25 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
 5% backupd
 2% diskimages-helper
 2% WindowServer
 0% fontd
 0% Fitbit Connect Menubar Helper
Top Processes by Memory:
492 MB mds_stores
295 MB Mail
221 MB SymDaemon
221 MB WindowServer
197 MB com.apple.IconServicesAgent
Virtual Memory Information:
18.19 GB Free RAM
3.68 GB Active RAM
511 MB Inactive RAM
1.63 GB Wired RAM
600 MB Page-ins
0 B Page-outs
Message was edited by: aghoo

Thanks Linc and John. This is what I did (sort of combining both of your suggestions).
1. I manually removed (as much as I can) MacKeeper and CleanmyMac (both trial versions).
2. Followed the steps and started in Safe Mode, and removed all Login Items from User.
3. Ran Disk Utility to repair permissions and disk.
4. Then started in both Safe and Normal modes.
Here is what I have discovered:
1. In Normal mode, it is definitely faster than ever, but the one problems still lingers.
2. However, in both Safe and Normal modes, it takes approximately 36 seconds from the time the Desktop screen appears and the time the HD Volume and other Desktop folders appear on Desktop. (There are only a few files on Desktop.)
3. When opening Application folders, the generic icons of the applications appear first before the customized icons replace the generic after about 2 seconds.
4. Files do not immediately appear after opening a folder. (But afterwards, the files appear quickly when reopening a folder.)
I ran Etrcheck again. Below is the results. What do you think the problem is?
Thank you.
EtreCheck version: 1.9.12 (48)
Report generated July 24, 2014 at 2:28:45 PM PDT
Hardware Information:
iMac (27-inch, Late 2012) (Verified)
EtreCheck version: 1.9.12 (48)
Report generated July 24, 2014 at 2:28:45 PM PDT
Hardware Information:
iMac (27-inch, Late 2012) (Verified)
iMa1 2.9 GHz Intel Core i5 CPU: 4 cores
24 GB RAM
Video Information:
NVIDIA GeForce GTX 660M - VRAM: 512 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:54
Disk Information:
APPLE HDD ST1000DM003 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 949.35 GB (630.54 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 50 GB (3.13 GB free)
USB Information:
Seagate Backup+ Desk Mac 3 TB
disk1s1 (disk1s1) <not mounted>: 209.7 MB
Seagate Backup Plus Drive (disk1s2) /Volumes/Seagate Backup Plus Drive: 3 TB (2.02 TB free)
VIA Labs, Inc. USB3.0 Hub
VIA Labs, Inc. USB3.0 Hub
VIA Labs, Inc. USB2.0 Hub
VIA Labs, Inc. USB2.0 Hub
FUJITSU ScanSnap S1300
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store
Kernel Extensions:
[not loaded] com.LaCie.ScsiType00 (1.5.1 - SDK 10.5) Support
[loaded] com.cisco.kext.acsock (1.1.0 - SDK 10.6) Support
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) Support
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) Support
[not loaded] com.elgato.eyetv.ClassicNotSeizeDriver (1.1.2) Support
[not loaded] com.lacie.driver.mvumi (1.3.12 - SDK 10.9) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) Support
[loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) Support
[not loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f2 - SDK 10.6) Support
[not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
Startup Items:
ciscod: Path: /System/Library/StartupItems/ciscod
MSUService: Path: /Library/StartupItems/MSUService
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.intego.BackupManagerPro.daemon.plist Support
[failed] com.lacie.LaCieDesktopManagerDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid] com.oracle.java.Helper-Tool.plist
[loaded] com.sharpcast.xfsmond.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] net.openvpn.client.plist Support
Launch Agents:
[running] com.brother.LOGINserver.plist Support
[loaded] com.cisco.anyconnect.gui.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.intego.backupmanagerpro.agent.plist Support
[failed] com.lacie.LaCieDesktopManagerAgent.plist Support
[invalid] com.oracle.java.Java-Updater.plist
[running] com.symantec.uiagent.application.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
User Login Items:
None
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.2.18903 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.2.6 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 3.0.50106.0 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.9 Support
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.7 Check version
Safari Extensions:
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx: Version: 1.0 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 Support
Stamps.com: Version: 1.1.12 Support
aliedit: Version: 1.0.0.5 - SDK 10.7 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
Symantec QuickMenu Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 884.15 GB Disk used: 296.91 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 95
Oldest backup: 2012-11-25 07:47:32 +0000
Last backup: 2014-07-24 20:07:10 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 296.91 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
 37% Finder
 1% WindowServer
 0% fontd
 0% hidd
 0% USBserver
Top Processes by Memory:
246 MB mds_stores
246 MB SymDaemon
197 MB com.apple.IconServicesAgent
123 MB Finder
123 MB WindowServer
Virtual Memory Information:
19.26 GB Free RAM
3.01 GB Active RAM
177 MB Inactive RAM
1.56 GB Wired RAM
293 MB Page-ins
0 B Page-outs

Windows XP displays "Disk Error" message during initial setup

I have gotten as far as choosing C:Partition3 <BOOTCAMP>[FAT32]. Windows setup then copies a bunch of files, initializes and then restarts and tells me to press any key which I do then I get a disk error and have to do a hard restart. I am never taken to the screen where I am to choose between NTFS and FAT so that I can format the partition.

A SOLUTION TO "INSTALL XP PRO SP2 INTO BOOTCAMP WITH LEOPARD, BUT NO OPTION TO FORMAT PARTITION"
After spending 14 hours trying to follow each and every leads in various discussion rooms, i was overjoyed to finally see the Windows logo on my screen.
THANK YOU TALEZ !
I followed carefully what he and Paul Thurrott's Supersite instructed. Below is Talez's advice:
Check to see if there is a file named "winnt.sif" inside the I386 folder on the Windows XP CD.
If there is follow these instructions to rebuild the Windows XP CD:
http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp
Skip steps 2 and 3 (since you already have SP2 built in) and remove the "winnt.sif" file from the I386 folder before going on to step 4.
If this was not working, my last option would be to reformat the whole Mac HD, install Windows, re-install Leopard and retrieving my data from Time Machine - although this is highly risky and not recommendable.

Ipod is displaying "Disk mode OK to disconnect" and is frozen on that screen. How do I get out of that screen?

My Ipod Nano is frozen on the screen "Disk Mode OK to disconnect" and has a large check mark. How do I get it out of this screen?

Hello there,
Have you tried a reset yet?
To do this on an older nano with a click wheel, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
If it's a 6G Nano, press and hold both the Sleep/Wake and Volume Down buttons together until you see the Apple logo.
Any luck there?
B-rock

My iphone has like 2gig space free, after connect to itunes phone display disk full how can i get my space back

i was using my iphone normally it has 2 gig space free i made a ringtone when i connected the iphone to transfer the ringtone itunes show sinc and make my phone look like is full but it has after connect the phone to itunes but im sure my phone has even more space cuz itunes even took the music off the phone how can i get my space back

http://support.apple.com/kb/ht1212

Dvt:map - Example of displaying line geometry ?

Hi all,
Does anyone know of an example that shows how to display themes that contain line geometry objects (e.g. delivery routes, bus routes etc.).
All the examples I've found so far only show how to display points or polygons (areas).
I tried to use a predefined theme but ran into another problem:
Re: dvt:map - how to use a predefinedTheme with bind variables
Regards,
Robert

Hi Robert,
Thanks for your immediate response.
My requirement is some how different from yours. In our case, there are certain graphs generated using Map Builder tool & are avaiable through the Data Source.
So, i need to integrate the base maps with UI. Im able to do that independently.
Now, my requirement is to changing the map dynamically while doing zoom in. Lets say, i have 3 maps. which are Area level, Region Level & Building Blocks Levels.
For each category i have a map. Initially, i need to display the Area level map...while doing the zoom in, depends upon the zoom in level i need to change the map dynamically to Region Level map. Similarly with Building block level.
I tried to do this from the backing bean by getting the Map Component & by getting the zoom level changing the property value of the map to region level map.
But the attribute "selectionListener" of <dvt:map component is not working for me. Hence got strucked here...Do you have any sugestions on this how easily we can do this.
Help me in this regard.
Thanks,
Konjeti

Since the last update websites are not displayed properly anymore: embedded youtube-videos with tha old youtube-code are not displayed

other browsers still display the websites properly

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

G460 Disk Read Error

Can someone help me, i'm figuring out what caaused this problem and i have so many files in my computer. When i turn it on it doesn't go through the LENOVO screen, then after 2 or 3 minutes it displays Disk Read Error, please press ctrl + alt the delete. the Harddisk light doesn't light up. and it makes a horrible noise. the noise I hear is like a Hard Disk spinning without a disk.

it seems your harddisc is dead. ( or possible connector issue )
if you have external harddisc box, remove your hard and replace into it, test your harddisc.
if it works, backup your data, replace your harddisc into computer.
try to re-install operation system. if it doesn't work, call lenovo and ship your computer back to service.

MAXL Disk Volume

"display disk volume 'application'.'database'; What are the preconditions that need to exist for this MAXL statment to return rows? There are no predefined volumes in my essbase installations. I want to get the same results as you do when you issue "listfiles 3" within a ESSCMD session but using MAXL. Thanks Razi 

If this is on a Windows server, you might try:ALTER DATABASE FFT_DLYT.FFDLY_T SET DISK VOLUME "D:\\" file_type INDEX; If "D" is the drive letter and you want the index files placed in the root directory.

CS - Scratch Disk Error, Hanging Crash

Photoshop has started flipping out on me for no good reason. Anything can trigger this 'hanging crash'; it appears to be completely random and regardless of file size, color space, tools in use, or anything else.
I get an error window, then the program locks up, spends at LEAST ten minutes failing to shut down (costing me a lot of idle time), and then finally closes. Force quitting will not speed up its 'crash' or stop it from beachballing. In addition, while it is taking its own sweet time to believe that it's been force-quit, it bogs down the rest of my machine so I can't hardly do anything else. Activity Monitor, however, will not show it as an active/running program.
I've run Disk First Aid and scraped off the preference barnacles, but it doesn't help. There USED to be a way to make the scratch disk bigger (I thought maybe it might somehow be running out of space) but that doesn't seem to be an option anymore.
This is the error window.

Okay, so... I just installed CS4 a little while ago.
I am STILL getting the same issues. Either it will just go into Spinnyball Neverland until I force quit it (which takes a good 10-15 minutes to even clear), or I get the exact same error message above.
No other CS4 products cause this error.... JUST Photoshop. What the fel is its damage? Can't anyone tell me?

Diskinfo -a command not listing the newly added disk

Hi,
I replaced an internal disk on my T4-1 box. After the replacement, I am able to find the disk listed in:
echo | format
cfgadm -al
df -hk (have mounted a file system on this new disk)
But the issue is that I am unable to find the disk getting listed in the diskinfo -a output.
Please suggest what needs to be done.
# cfgadm -al
c9::w5000cca012c4ec8d,0 disk-path connected configured unknown
c10 scsi-sas connected configured unknown
c10::w5000cca012b4d099,0 disk-path connected configured unknown
c10::w5000cca012c99be5,0 disk-path connected unconfigured unknown
c11 scsi-sas connected configured unknown
c11::w5000cca012d20555,0 disk-path connected configured unknown
bash-3.2# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t5000CCA012B4D098d0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012b4d098
1. c0t5000CCA012C4EC8Cd0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012c4ec8c
2. c0t5000CCA012C9AA14d0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012c9aa14
3. c0t5000CCA012D20554d0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012d20554
4. c0t60080E50002499E60000039B504D627Fd0 <SUN-LCSM100_S-0780 cyl 38398 alt 2 hd 256 sec 64>
/scsi_vhci/disk@g60080e50002499e60000039b504d627f
5. c0t60080E50002499E60000039E504D62ABd0 <SUN-LCSM100_S-0780 cyl 38398 alt 2 hd 256 sec 64>
/scsi_vhci/disk@g60080e50002499e60000039e504d62ab
6. c1t50080E52499E6000d31 <SUN-UniversalXport-0777 cyl 8 alt 2 hd 64 sec 64>
/pci@400/pci@1/pci@0/pci@8/LSI,sas@0/iport@f/disk@w50080e52499e6000,1f
7. c3t50080E5249EC8000d31 <SUN-UniversalXport-0777 cyl 8 alt 2 hd 64 sec 64>
/pci@400/pci@2/pci@0/pci@8/LSI,sas@0/iport@f/disk@w50080e5249ec8000,1f
Specify disk (enter its number): Specify disk (enter its number):
bash-3.2#
bash-3.2# diskinfo -a
Enclosure path: 1203BD02DA-physical-hba-1
Chassis Serial Number: 1203BD02DA-physical-hba-1
Chassis Model: ORCL,Netra-SPARC-T4-1
Label Disk name Vendor Product Vers
/SYS/HDD0 c0t5000CCA012C9AA14d0 HITACHI H106030SDSUN300G A2B0
/SYS/HDD1 c0t5000CCA012C4EC8Cd0 HITACHI H106030SDSUN300G A2B0
/SYS/HDD3 c0t5000CCA012D20554d0 HITACHI H106030SDSUN300G A2B0
bash-3.2#
Seems like the issue will get resolved if I can remove the old entry of the disk in the cfgadm -al output.
But in our setup we can not use the luxadm command to make the disk unused.
So please suggest any alternative way to remove the extra entry (old disk's):
# cfgadm -la | grep “c10::”
c10::w5000cca012b4d099,0 disk-path connected configured unknown
c10::w5000cca012c99be5,0 disk-path connected unconfigured unknown
After reboot:
Output after reboot:
# cfgadm -al | grep “c10::”
c10::w5000cca012b4d099,0 disk-path connected configured unknown
Edited by: 951222 on Oct 23, 2012 4:57 AM

Please note that the diskinfo command was added to Solaris 10U10 to provide the disk location, but due to bug 7093855 it only displays disks from the first controller. This will be corrected in S10U11.
From Document 1365089.1 (How to locate a failed internal disk drive on a T3/T4 series system)

Displaying disk geometry on a disk bigger tha 1 TB

Similar Messages

Maybe you are looking for