Displaying Duration Time

Hello, :)
Where is the option to display the video's duration time?
Haven't found it yet...
I am using Captivate 2 and would like the user to see how
long the video goes.
Thanks much!
Stefan

Hi Guys! Yes, I'm sure you can do it in Flash ...
You can display a
clock displaying
timeof day. There is all kinds of information about this at
Edmund Mullen's site, located at:
http://ed.mullen.home.comcast.net/fclock.html
If you want a SWF you can insert into a Captivate movie that
displays elapsed time, I have a diferent suggestion. First,
understand that elapsed time (ET) can be a tricky bugger, becuase
it is probably not "straight-ahead" elapsed time. If your Captivate
movies have any interactivity, you may or may not want those
"pauses" counted in elapsed time metering. You need something
special, and as Rick said, that animal don't live here ...
Contact Paul Dehurst (fellow community expert) and ask if
Paul will build you something like this. He may be too busy, or
just not interested in extra work right now, but if he does it for
you, he'll do a good job. Expect to pay him a negotiated fee - it
will be reasonable. Paul can be reached right here, or at his
web-site at:
http://www.raisingaimee.co.uk/
Click the link to: "
Contact Paul:"
Second idea, if Paul can't be convinced to help you out ...
call RentaCoder. You can reach them at:
http://www.rentacoder.com/RentACoder/default.asp
Seriously, these folks might be the most underappreciated
people on the net. In just a few minutes at their site, you can
find a programmer in almost any software language - often close to
your physical location. No, I haven't personally used them, but a
company I contracted with recently had a need for a special Flash
tool, and contacted a Flash coder through "rentacoder" - and were
very pleased. Good luck!

Similar Messages

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

Error on entering the Time widget to display the current/left video duration time

Working with Adobe Captivate 6.0 (Version 6.0.1.240) and trying to include an interactive video demonstrating possibilities and features of our software, I've experienced some issues.
When entering the Time widget to display the current/left video duration time, Adobe Captivate is closed with the following error:
[Window Title]
Adobe Captivate
[Main Instruction]
"Adobe Captivate" has stopped working.
[Content]
Windows can check online for a solution to the problem.
[^] Close details [Check online for a solution to the problem and close the program] [Close the program] [Debug the program]
The program works the same way when using other widgets such as ArrowWidget, AskAnExpert, Browser, CheckBoxes, Combobox, etc.
What could be the most possible reason for that?

Hello guys,
thank you for trying to help me.
to Lilybiri: I use the Timer widget included with Captivate 6, Version 6.0.1.240. That's why it doesn't show the time. Could you please tell me if it is possible to display the current/left video duration time? If so, how we can do that?
to Vishhere: Yes, this is happening when I insert interactions or widgets from the Insert Menu. I reset the default preferences as you suggested. Unfortunately, it didn't help.
When I go for inserting any interactive element or a widget from Insert/ Widget/Interactions the application is closed and an error message appears like the screenshot given here:

FLV player, displaying duration and time

Hello,
I am in need of some help!
I have a FLV player that uses the netstream method to call in
external flv files. I'd like the flv player to identify how long
the specified flv file is, in minutes, and display it in a text
field. I would also like the time elapsed to be dispayed, when the
video is actually being played.
How would i go about getting this functionality to work?
I will post my code up if you guys want to see it but for the
time being i'd just like some advice.
I hope someone can help!
Regards
EGR103

Hi Guys! Yes, I'm sure you can do it in Flash ...
You can display a
clock displaying
timeof day. There is all kinds of information about this at
Edmund Mullen's site, located at:
http://ed.mullen.home.comcast.net/fclock.html
If you want a SWF you can insert into a Captivate movie that
displays elapsed time, I have a diferent suggestion. First,
understand that elapsed time (ET) can be a tricky bugger, becuase
it is probably not "straight-ahead" elapsed time. If your Captivate
movies have any interactivity, you may or may not want those
"pauses" counted in elapsed time metering. You need something
special, and as Rick said, that animal don't live here ...
Contact Paul Dehurst (fellow community expert) and ask if
Paul will build you something like this. He may be too busy, or
just not interested in extra work right now, but if he does it for
you, he'll do a good job. Expect to pay him a negotiated fee - it
will be reasonable. Paul can be reached right here, or at his
web-site at:
http://www.raisingaimee.co.uk/
Click the link to: "
Contact Paul:"
Second idea, if Paul can't be convinced to help you out ...
call RentaCoder. You can reach them at:
http://www.rentacoder.com/RentACoder/default.asp
Seriously, these folks might be the most underappreciated
people on the net. In just a few minutes at their site, you can
find a programmer in almost any software language - often close to
your physical location. No, I haven't personally used them, but a
company I contracted with recently had a need for a special Flash
tool, and contacted a Flash coder through "rentacoder" - and were
very pleased. Good luck!

MP3 & MP4 Duration Times (Mavericks)

Can anybody help with this puzzler,please?
Whenever I download an mp4 or mp3 file to my desktop,its duration is not displayed under its title. When I move the same file into a folder,the duration is then shown. I do have switched on 'show all filename extensions' in the Finder preferences.
Attached are two photos of the same files. On the desktop,no duration time. In a folder,duration time displayed.

Hello there, Wizard_Magic_Spell.
The following Knowledge Base article provides some insight on how to get that feature to show:
OS X Mavericks: Choose options for viewing items in Finder windows
http://support.apple.com/kb/PH13896
Of particular note once your file is selected on your Desktop, then:
Choose View > Show View Options, then try out the different options and menu items. Your changes take effect immediately, so you can see the results of your choices.
In that window that opens you should see an option to "Show Item Info". Place a checkmark in that box and that should allow you to see the duration time.
Cheers,
Pedro.

COGI : how to display the time of a goods movement?

Hello,
through COGI, I get the good movements with error per material.
When I open the errors list for a material, I get the posting date for each good movements but not the time!
Could you please let me know how to do for displaying error time or posting time in this screen?
Thank you for your help!
François

Deleted

Display specific row to display multiple time in jsf table 11.1.1.2.0 with

HI ALL,
I'm using jdeveloper 11.1.1.2.0 with ADF 11g.
I have to display the values in jsf frm table where i'm using DislayCertDetailVO . In dis VO i'm having a column no.of certificaties .taking dis column value when i navigate to other page jsf by selecting a specific row. here i have to display the selected row in multiple times based on the no.of.certificates column value.
I want to display specific row to display multiple time to repeat same row in a table in jsf based on the value from bean or table in database.
Edited by: user9010551 on Apr 28, 2010 6:14 AM
Edited by: user9010551 on Apr 28, 2010 10:33 PM

Hi, Trying it once more to give more clarity of my scenario.
I have to navigate from 1 screen to the other by picking a given table record/row from the 1st screen. While displaying the record on the 2nd screen the catch is that, I have to display it as many times as the value in a cell of the selected record.
eg.
screen 1
col1 col2 col3
2 order1 item1
[next]
On clicking next it should look like
screen2
col1 col2 col3 col4
order1 item1
order1 item1
where col3 and col4 will be editable by the user and col1 is the value depends how many times i have repeat the row/record
Hope this give more clarity.

Report to display Average time taken for processing payments".

Hi,
I have been asked to develop a report for "Report to display Average time taken for processing payments".
Could any one guide me technically what are the different tables i need to take to generate the report. Treat this is very urgent. Pls provide sample code too....
Thanks in advance....

Given below is the set up for credit card payment processing:
Set Up Credit Control Areas:
Define Credit Control Area
Transaction: OB45
Tables: T014
Action: Define a credit control area and its associated currency. The Update Group should be 00012. This entry is required so the sales order will calculate the value to authorize
Assign Company Code to Credit Control Area
Transaction: OB38
Tables: T001
Action: Assign a default credit control area for each company code
Define Permitted Credit Control Area for a Company
Code
Transaction:
Tables: T001CM
Action: For each company code enter every credit control area that can be used
Identify Credit Price
Transaction: V/08
Tables: T683S
Action: Towards the end of the pricing procedure, after all pricing and tax determination, create a subtotal line to store the value of the price plus any sales tax. Make the following entries:
Sub to: A
Reqt: 2
AltCTy: 4
Automatic Credit Checking
Transaction: OVA8
Tables: T691F
Action: Select each combination of credit control areas, risk categories and document types for which credit checking should be bypassed. You need to mark the field no Credit Check with the valid number for sales documents.
Set Up Payment Guarantees
Define Forms of Payment Guarantee
Transaction: OVFD
Tables: T691K
Action: R/3 is delivered with form 02 defined for payment cards. Other than the descriptor, the only other entry should be 3 in the column labeled PymtGuaCat
Define Payment Guarantee Procedure
Transaction:
Tables: T691M/T691O
Action: Define a procedure and a description.
Forms of Payment Guarantee and make the following entries Sequential Number 1
Payment Guarantee Form 02
Routine Number   0    Routine Number can be used to validate payment card presence.
Define Customer Payment Guarantee Flag
Transaction:
Tables: T691P
Action: Define a flag to be stored in table.
Create Customer Payment Guarantee = Payment Card Payment Cards (All Customers can use Payment Cards).
Define Sales Document Payment Guarantee Flag
Transaction:
Tables: T691R
Action: Define the flag that will be associated with sales document types that are relevant for payment cards
Assign Sales Document Payment Guarantee Flag
Transaction:
Tables: TVAK
Action: Assign the document flag type the sales documents types that are relevant for payment cards.
Determine Payment Guarantee Procedure
Transaction: OVFJ
Tables: T691U
Action: Combine the Customer flag and the sales document flag to derive the payment guarantee procedure
Payment Card Configuration
Define Card Types
Transaction:
Tables: TVCIN
Action: Create the different card types plus the routine that validates the card for length and prefix (etc)
Visa , Mastercard, American Express, and Discover
Create the following entries for each payment card
AMEX American Express ZCCARD_CHECK_AMEX Month
DC Discover Card ZCCARD_CHECK_DC Month*****
MC Mastercard ZCCARD_CHECK_MC Month
VISA Visa   ZCCARD_CHECK_VISA Month
The Routines can be created based on the original routines delivered by SAP.
*****SAP does not deliver a card check for Discover Card. We created our own routine.
Define Card Categories
Transaction:
Tables: TVCTY
Action: Define the card category to determine if a
payment card is a credit card or a procurement card.
Create the following two entries
Cat Description One Card Additional Data
CC Credit Cards No-check No-check
PC Procurement Cards No-check Check
Determine Card Categories
Transaction:
Tables: TVCTD
Action: For each card category map the account number range to a card category. Multiple ranges are possible for each card category or a masking technique can be used. Get the card number ranges from user community. Below is just a sample of what I am aware are the different types of cards.
Visa Credit Expires in 7 days.
    400000   405500
    405505   405549
    405555   415927
    415929   424603
    424606   427532
    427534   428799
    428900   471699
    471700   499999
Visa Procurement Expires in 7 days.
    405501   405504
    405550   405554
    415928   415928
    424604   424605
    427533   427533
    428800   428899
Mastercard Credit Expires in 30 days
    500000   540499
    540600   554999
    557000   599999
Mastercard Procurement Expires in 30 days
    540500   540599
    555000   556999
American Express Credit Expires in 30 days
    340000   349999
    370000   379999
Discover Card Credit Expires in 30 days
    601100   601199
Set Sales Documents to accept Payment Card Information Transaction:
Tables: TVAK
Action: Review the listing of Sales Document types and enter 03 in the column labeled PT for each type which can accept a payment card
Configuration for Authorization Request
Maintain Authorization Requirements
Transaction: OV9A
Tables: TFRM
Action: Define and activate the abap requirement that determines when an authorization is sent. Note that the following tables are available to be used in the abap requirement (VBAK, VBAP, VBKD, VBUK, and VBUP).
Define Checking Group
Transaction:
Tables: CCPGA
Action: Define a checking group and enter the
description. Then follow the below guidelines for the remaining fields to be filled.
AuthReq Routine 901 is set here.
PreAu If checked R/3 will request an authorization for a .01 and the authorization will be flagged as such. (Insight does not use pre-authorization check).
A horizon This is the days in the future SAP will use to determine the value to authorize
(Insight does not use auth horizon period).
Valid You will get warning message if the payment card is expiring within 30 days of order entry date.
Assign Checking Group to Sales Document
Transaction:
Tables: TVAK
Action: Assign the checking group to the sales order types relevant for payment cards
Define Authorization Validity Periods
Transaction:
Tables: TVCIN
Action: For each card type enter the authorization validity period in days.
AMEX American Express 30
DC Discover card 30
MC Master card 30
VISA Visa   7
Configuration for clearing houses
Create new General Ledger Accounts
Transaction: FS01
Tables:
Action: Two General Ledger accounts need to be created for each payment card type. One for A/R reconciliation purposes and one for credit card clearing.
Maintain Condition Types
Transaction: OV85
Tables: T685
Action: Define a condition type for account determination and assign it to access sequence A001
Define account determination procedure
Transaction: OV86
Tables: T683 / T683S
Action: Define procedure name and select the procedure for control. Enter the condition type defined in the previous step.
Assign account determination procedure
Transaction:
Tables:
Action: Determine which billing type we are using for payment card process.
Authorization and Settlement Control
Transaction:
Tables: TCCAA
Action: Define the general ledger accounts for reconciliation and clearing and assign the function modules for authorization and settlement along with the proper RFC destinations for each.
Enter Merchant IDs
Transaction:
Tables: TCCM
Action: Create the merchant ids that the company uses to process payment cards
Assign merchant ids
Transaction:
Tables: TCCAA
Action: Enter the merchant ids with each clearinghouse account

How can I display the time remaining in the bar on the top instead of the percentage using mountain lion?

Hi,
in Lion I was able to display the time passively in the top bar. Now I only have the chance to display the percentage. Anyone has a solution for this? I do not want to click always on my battery button just to see something I used to see in the past at a more prominent place.
Actually this bug really ticks me off!
Thanks for any advise.

http://www.apple.com/feedback/macosx.html
Send feedback to apple about changing this back.
There is no native way to do this.

How do i change the duration time on my music

i want to make the duration time on one of my songs shorter but when i
1. right click on the song
2. click get info
3. click options
4. the box turns grey and doesn't let me click on anything
i can see the little thing that says start and stop time but it doesn't let me click it. what do i do?

Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
tt2

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

How to display the time in Swing jtable

I need to display the time in jTable.
The time is a date field in ORACLE database (connected via
Oracle Thin drivers).
Im totally stuck. Please help.
TIA.

Thanks for your reply.
My problem is that I have to display time. This time is a DATE field
in ORACLE database.
Im using FORTE (UI). What the jTable display is the DATE (1900-01-01) which is not what I want. I want the time to appear in the jTable (hh.mm.ss a).
What I did was to use the TO_CHAR function of ORACLE to format the
date to display the correct time in the VIEW before mapping this view
to be used as a MODEL by the jTable.
It works now.
Much appreciate all your help. Thanks.

How to display the time 00:00:00 as blank?

Dear Friends,
I have created a new field GDF_9000_CREATED_AT in the normal screen (dynpro), the format is TIMS, however, when there is no value for it, is always display like "00:00:00" on the screen.
So how to display the time 00:00:00 as blank in the normal screen (dynpro) when there is no value for it?
Thanks a lot!!

In screen PBO module:
        LOOP AT SCREEN.
          if screen-name EQ 'my_time' AND my_time EQ time_zero.
            screen-invisible = 'X'.
            screen-active = 0.
            MODIFY SCREEN.
          endif.
        ENDLOOP.
I don't try this, but i think is true...
Edited by: Marco Modenese on May 7, 2009 10:36 AM
Edited by: Marco Modenese on May 7, 2009 10:36 AM

How to display the time length of video (current time/ total time) ?

Hi,everyone. I would like to ask how to display the time length of the video which show only in system example: it show the current time and total time? using AS 3.0.
It there any information or solution to solve it? .
I appreciate it any of you able to answer it. ^^
Thank you.

Hi,
Actually I have this requirement for MAC OS 10.5. With the code you provided, I got the output as "6289375". When I changed the URL to point to my file (file:///Users/VPKVL/Desktop/MyRecord/tempAudio.wav), I am getting the below mentioned Exception:
Exception in thread "main" javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
     at com.sun.media.sound.MixerClip.implOpen(MixerClip.java:561)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:165)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:256)
     at TestWavLength.main(TestWavLength.java:13)The "tempAudio.wav" file is created by using java sound API. I am using the SSB USB Headphone Set to record the audio with the following settings for AudioFormat object:
AudioFormat audioFormat = new AudioFormat(
          AudioFormat.Encoding.PCM_SIGNED, // the audio encoding
                                                        // technique
          48000.0F,// sampleRate the number of samples per second
          16, // sampleSizeInBits the number of bits in each sample
          2, // channels the number of channels (1 for mono, 2 for
                        // stereo, and so on)
          4, // frameSize the number of bytes in each frame
          48000.0F,// frameRate the number of frames per second
          false); // bigEndian indicates whether the data for a single
                        // sample is stored in big-endian byte order
                        // (false means little-endian)Can you please suggest where I am going wrong ?

Does an external hard drive ALWAYS need to be connected to my mbp with retina display for Time Machine?

Does an external hard drive ALWAYS need to be connected to my mbp (OS 10.10.1) with retina display for Time Machine? Or can it be connected once a week or whenever I want? I used to have an external drive always connected to my previous mbp, but it made moving my mbp around a bit of a hassle with it connected...

When the backup drive is not connected, some of the free space on the internal drive will be used to make local snapshots, which are backup copies of recently deleted files. Local snapshots will protect you from unintended file deletions, but not from a drive failure. You should only go as long between backups as you're willing to lose data. If losing a week's worth of work is acceptable to you, then that backup frequency is OK. Otherwise, it isn't.

Displaying Duration Time

Similar Messages

Maybe you are looking for