Displaying Exif info at the import screen

Is there a way to view exif info of each photo on the LR 4.2 import screen. I'd like to view Exif data before making the decision to import the capture but can't figure out how to do this. Ideally it would appear as a 'tooltip' when hovering over the image in gridview, or, when looking at a single image it using the "I" key should display image info like it does in other modules of LR4. Are there any plugins that could do that?
Thanks!

I don't think this feature exists.
I believe the philosophy here is import the photos, then use the power of the Library Module if you want EXIF information.

Similar Messages

I have an iPhone 4S and a 2012 Honda CRV . The streaming BT music is fine but now suddenly it stopped displaying song info on the screen. It worked for about 10 days and then stopped. Any thoughts?

I have an iPhone 4S and a 2012 Honda CRV . The streaming BT music is fine but now suddenly it stopped displaying song info on the screen. It worked for about 10 days and then stopped. Any thoughts?

I think that we all know the answer to this one.
Unfortunatley the device is concidered damaged by water. Apple can do an out of warranty repair which would cost $199. Generally they would just replace the device in this case for the $199.
The alternative is to Purchase a new device.

Displays not sleeping at the login screen

Since I upgraded(clean installation) from 10.4 server to 10.5 server none of the client station displays will sleep at the login screen. I have 3 labs with Intel iMacs running 10.4 and 10.5. I have Workgroup manager set to always manage the Desktop in Energy Saver and put only the displays to sleep after an hour. This used to work with 10.4 server even at the login screen. Is there a way I can get them to sleep at the login screen?
George

Well I am still trying to figure out the issue however I have made some ground. It seems that my 10.5 Intel iMacs screens appear to sleep if set it to less than an hour like 45 minutes or 15 minutes but my 10.4 PPC macs worked the first day at 15 minutes but currently are not sleeping. I will keep trying...
George

Any easy way to get EXIF info into the Description?

I'd like to use the Share feature in iPhoto '11 to ... well, share a bunch of photos, including their EXIF info in the Description. Out of the box it looks like the only way to do that is to hand-enter all that data, which is a PITA. Anyone know of an iPhoto plugin or other way to automate getting at least some of the EXIF data into the Description field?

I would have bet a great deal of money you'd go on to question why I was sharing on Facebook instead of elsewhere, even though that's wholly irrelevant to my question. How does my "explaining" it help answer my question?
For those not ignoring me and instead actually interested in being helpful rather than boosting their post count, the reason I'm sharing on Facebook is because that is where the group is based with whom I'm sharing the photos. The EXIF data isn't critical, just helpful. I'm not trying to share full-resolution photos for people to download and print but rather sample photos with various lenses and configurations to give a general idea about what said lenses or configurations do for the photo, and providing the EXIF info is helpful. Right now I'm entering it into the Description field manually, but given that the data is right there I was hoping someone else would have also seen this need and created a solution.
Anyone?

Can i display my PS4 on the iMac screen?

Can i display my PS4 on the iMac screen just by using a Mini Displayport like this one: http://i.simpalsmedia.com/999.md/BoardImages/900x900/9f845806fc264ec4a153c5a8815 a8e8d.jpg
If yes, what software should i use?
I got Apple iMac "Core i5" 2.9 21.5-Inch (Late 2013)

Welcome to Apple Support Communities
No. Target Display mode only works with other Macs. In the past there were an adapter to connect a PlayStation 3 or Xbox 360 to a 27-inch iMac, but it no longer works with Thunderbolt iMacs like your computer.

Feature P0002, can not see Gender info on the IT0002 screen 2000.

Hi,
I m new to SAP HR. I need to fill gender information into info type 0002 and found that in the info type 0002, the Gender information is missing from the screen 2000.
Then I checked in the info type screen control (Change Screen Modifications), and have found that there are alternative screen mentained wih Variable key. Few variable keys mentioned are '01', '02', '06', '06KL' and so on. I do not understand the meaning of this. what are the '01', '02', '06', '06KL' are refering to? Whether the screen depends upon particular personnel number or user? I want to know what values (BUKRS, BTRTL,PERSG / or User group/ or MOLGA? ) should be set to '01', '02', '06', '06KL' so that I can view the alternative screen mentioned for these variable keys?
If any one has any idea please help me out.
Thanks,
Rupali

Hi Rupali,
It works like this..
1. Basically your USer Parameters are set to Certain UGR and MOLGA...(TCODE: SU3 / Parameters Tab)
For Example, lets say the UGR is 10 and MOL is 10.
2. Go to TCODE PE03 - Feature P0002 and check the radio button attributes, click display, hit the Struct. button
This will show the Structure name that is being used.. PME04... and the valid fields for decisions...
When you are creating/editing PE03 - Feature P0002.... you can basically base your decisions on any of these fields....
i.e. BUKRS, BTRTL, PERSG, PERSK, MOLGA, TCLAS, USERG... The return value is a Variable Key....(max of 2 chars)..say 11
For you to identify, just take one PERNR for which you are unable to see the Gender field... now click F1 on that field, see the technical parameters and identify which screen is called........say MP000200 / 2010
3. Go to SM30, Table T588M and check for the combination arrived above....i.e. MP000200 / 2010 / 11; double click on it and see if the field is in hidden mode.....
IN YOUR CASE, FIRST CHANGE THE PARAMETER SETTINGS to the MOL, UGR you want to and then test all the above....
Good Luck !!
Kumarpal Jain.

Is it possible to display a tag at the selection screen in the output.

Hi all,
   When you go to se38 and in the program editor screen, at the bottom right end of the screen you find a value called NUM and when you place your cursor on that it displays a tag that says "Num Lock Mode. Double click to toggle."
   My query is, when i execute a report it takes me to the output screen that has a parameter, here i want to display a tag, say "enter the record as it is in the database". Is it possible to have such an option.
   If you'll are wondering why I'm looking for such an option it is just to make a report that can be understood by many.
P.S: Not only on the NUM field the tag is available. Even on tools like activate display and so on.
Regards,
Narayanan Chandran.

If it's a report program, use a comment in the selcetion screen for information of the user as shown below.
* Information
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-003.
SELECTION-SCREEN COMMENT /1(60) text-004. "Text containing the information message
SELECTION-SCREEN END OF BLOCK b1.
If you are using a module pool, you can create a tooltip for the element as suggested.

How to Display my Form in the selection screen.(without print format)

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Prasad,
Pls refer the below link.
<< Moderator message - Point begging removed >>
http://wiki.sdn.sap.com/wiki/display/Snippets/Displayimagesontheselection-screen
Thanks
Arjun
Edited by: Rob Burbank on Aug 17, 2011 2:24 PM

Need help in displaying error message on the same screen

Hi Experts,
I have written a report which gets called from IW52 by clicking one of the action items. Now in my report when I am trying display an error message it is getting displayed at the bottom of a blank screen. My requirement is to display it at the bottom of the IW52 screen, so that user can rectify the error.
Please help.
Regards,
Sambaran Ray.

Hi,
Probably you need to find a way to enhance the standard code.
But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
Hope this helps you.
Regards,
Tarun

I can't import Seamonkey bookmarks because the only option shown on the "Import" screen in Firefox is for Internet Explorer.

On my XP computer the "import" option screen shows both IE and Netscape/Mozilla as choices; on this Windows 7 machine the only option is IE. Re-start doesn't help, and the installation of Firefox went smoothly.

You can export the bookmarks in SeaMonkey to an HTML file and import that file in Firefox.<br />
Which SeaMonkey version are you referring to?
* Export the favorites in SeaMonkey to an HTML file (bookmarks.html):
Bookmarks > Manage Bookmarks > Tools > Export
* Import the HTML file in Firefox:
Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
See also http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

Custom Infotype not displaying locked records in the list screen (3000)

I have a custom infotype (9xxx) that will not display the locked records (locked indicator (sprps) is set to X) in the list screen (3000) in PA20 and PA30.
Any ideas on what may be causing the records to not display in the list screen?
Thanks,
Ted

Hi,
for creating both employee and appliciant infotype you must check 'Both' in PM01 IT tab.
Regards.

Disabling the previous agent info on the login screen

We are using IPCC enterprise 8.03 with CTIOS and offer multiple shifts in our call center. Due to security reasons, we would like to disable the last agent logged in info from the IPCC agent desktop. Currently when an agent launches IPCC desktop, it displays the agent id and extension of the last agent who was logged in; we would like to set it where last agent's information is not automatically pre-populated.
Thanks for your help..

we use the below bat file for lauching CAD to remove existing agent data.
@echo off
setlocal
REM # This script re-writes the .ini file for CAD to clean up old usernames.
REM # It restors a copy of the .ini file over the current version, and
REM # substitues the username field with the current user and removes
REM # (blanks) any existing phone extension.
set INI_LOCATION="C:\Program Files\Cisco\Desktop\config\PhoneDev.cfg"
REM set INI_LOCATION=PhoneDev.ini
REM ### Original File: ###
REM [PhoneDevice]
REM Appearance0=6752
REM [AgentID]
REM AgentID=test
REM [AgentMobilePhone]
REM RemoteAgent=0
REM Number=
REM AgentWorkMode=0
REM ######## END of Original #####
C:
REM ## Build new file from scratch
echo [PhoneDevice] > %INI_LOCATION%
echo Appearance0= >> %INI_LOCATION%
echo [AgentID] >> %INI_LOCATION%
echo AgentID=%USERNAME% >> %INI_LOCATION%
echo [AgentMobilePhone] >> %INI_LOCATION%
echo RemoteAgent=0 >> %INI_LOCATION%
echo Number= >> %INI_LOCATION%
echo AgentWorkMode=0 >> %INI_LOCATION%
REM # END
cd "C:\Program Files\Cisco\Desktop\bin"
start agent.exe
exit

How to add new data entry and display old data in the same screen in SM30?

Hi, Experts:
We need to use SM30 to maintain a table entry. When I click the button of "New Entries", the table screen becomes blank. I can only add new data but not be able to see the old data existing in the table.
How can I have the new line available for me to add new data at the same time see the data currently existing in the table?
Thanks,
Jenny

Hi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny

PA30 Display Employee details on the Header Screen

Dear Team:
Sometimes I see that using transaction PA20 or PA30, when I give the Personnel Number, in the header screen, I do not see any employee information for some employees and could able to see other employees.
Anything that restricts us to see the employee details in the header screen.
If it is an authorization issue, what is the check that is restricting the same. Which authorization details should the I have to look for the employee details in the header screen.
Thanks and Regards
Team Member.

Below are already avialable in the table.
00     A     60
00     B     80
01     A     01
01     B     21
02     A     02
02     B     22
03     A     03
03     B     23
04     A     04
04     B     24
05     A     18
10     A     00
10     B     20
45     A     45
Regards
Team Member

Program displaying technical codes in the selection screen during execution

Hi Gurus
I am facing problem during the execution of the newly created program that during execution of program selection screen is displaying technical codes.
from where to change the settings so that it should show the description
Regrads
Manvir

Hi ,
goto se38 ..give ur code name and select change...now on the top u will see Goto..
follow this path Goto >Text Elements > Selection text.
Now you can give the name u want..
regards,
Anuj

Displaying Exif info at the import screen

Similar Messages

Maybe you are looking for