Displaying frames in premiere pro 2.5

The frmaes of clips in timeline son't seem to be whole frames. I have set the view frame setting to 1 frame but this does not work and is a problem when deleting frames. I have selected pal etc so what am i doing wrong?
Thanks
jane

1st, there is no such thing as PPro 2.5
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
2nd, Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Similar Messages

How do I set poster frame in Premiere Pro?

Does anyone know how to set poster frame in Premiere Pro? Wasted hours trying to figure this out and reading all forum threads and sadly still to no avail. Any help much appreciated.

thanks at JSS1138 for this and that appears to enable me to select 'set poster frame' (albeit it not on static images). However, when I export the video the (supposedly now) set poster frame still does not appear as the preview image. Any ideas on this?

How do I crop a frame in Premiere Pro CS6?

In FCP, you can crop a frame by going to wireframe and simply adjusting it to crop the image area you want to show. I want to maintain 16:9 but simple make the clip 'zoomed in' to an area that I want. It won't be too drastic of a crop. Does Premiere Pro have the ability to do this?
TIA,
Ken

I see that, like the beginner that I am, I used the wrong terminology. Crop does indeed crop, but, working in print media for most of my life, what I was looking for was to seclect a portion of the view and 'enlarge it' to fill the frame with some selective positioning of the area to be used. It might be more correctly called 'zooming in' on an area of the original frame, and also filling the frame with that selected area. I hope that this helps give an idea of what I am after.
Another way of putting it might be like a car in the distance coming at the camera and then getting close to the camera. With that scene, what I would want to do is start by filling the frame with the car in the distance and keyframe a 'zoom out' effect that would keep the car filling the screen and eventually wind up with the car close to the camera. So the car would be big, filling the frame, all the while it was coming toward the camera. I belive this would be called starting with a full zoom and then 'zooming out' until the car was at the point near the camera.
PS: after trying everything again, I see that 'Scale' is indeed the answer to what I wanted. Keeping things centered on the screen is a trick and I've added many keyframes, almost at every frame in one instance, to keep the subject centered on screen. Also, I see that 600% is the maximum scale I can use to start with, so some responsibility must lie in the hands of the videographer and the zoom lens on the camera.
Any comments you have to possible help as I flounder with my beginning efforts would be appreciated. I believe control will come if I put the time in now.

Display Issues in Premiere Pro CS4

I'm having some weird display glitches in Adobe Premiere Pro CS4 in the timeline area. I attached a picture that shows what it looks like. This happens whenever I drag clips on the timeline and it makes it so it takes a lot longer to edit my videos.
I'm really hoping that Apple or Adobe fixes this issue. I really can't afford to upgrade my creative suite to CS 5.5! And I would prefer to stick with OS X Lion.
Well it looks like I can't upload an image. Any ideas?

Keep in mind that the following sustained transfer rates - as a rough rule of thumb - apply:
SATA & eSATA: 80 - 100 MBps
Firewire 800:       50 - 60 MBps
Firewire 400:       30 - 35 MBps
USB2:                20 - 25 MBps (depending on other USB devices connected it could be even lower.)
I agree that your storage capacity with 1 TB is enough, but the interface is too slow. If you do not have an eSATA port on you Vaio, you can get a Xpress card to eSATA connector with two eSATA ports to cover that. Also keep in mind that the C drive may be a 4200 or 5400 RPM disk and not 7200.
Mininmum requirements state: a DEDICATED 7200 RPM disk and while your USB disk is 7200, it lacks in the sustained transfer rate when compared to SATA or eSATA. BTW I think Adobe should explicitly mention SATA or better.
Above I mentioned for USB depending on other USB devices attached. USB shares the bandwidth among all devices connected. If you have a USB stick connected, a USB receiver for wireless keyboard or mouse, a USB printer, they all have to share the bandwidth and further reduce the sustained transfer rates of the USB disk.
Hope this explains it a bit.

RED FRAMES ON PREMIERE PRO 8.1 CARAVAN ON PROJECTS THAT WERE FINE BEFORE

I am having this RED FRAMES issue now, never heard of this problem until now. And its happening inside projects that had been ok since a few months back when I finish them. I just went in to export again some of the sequences and now the red frames are all over like a plague. Its Canon footage from an XF300. Ive deleted media cache files, digital rebellion house clean, and now that I want to restart premiere it keeps on crashing while loading the media files, I relaunch again and it loads some more files a bit further until if finally stops crashing after 3 -4 times. I tried then the solution that somebody stated: offline clips, delete media cache, save project, close project, link again, and the red frames were gone from the timeline, but they did show up in the exported movie!! I need to deliver this to client this Monday!! Is there any fix to this? I been using this project for a few months exporting movies with no problem until now, but I haven't changed anything in the project. What caused it? What should I do to fix this asap. Please help! Im running of Premiere Pro 8.1 Caravan OSX 10.9.2 I need to deliver movie to client asap im pulling my hair.

Hi Somu cena,
Welcome to Adobe forums.
You can install the 8.2 update directly. Please check what's changed and fixed in both the updates from the below links.
Premiere Pro CC 2014.1 Release | Premiere Pro work area
Premiere Pro CC (2014.2) Release | Premiere Pro work area
Regards,
Vinay

Java / Display Driver and Premiere Pro CS5

I have had problems in that the display driver stops responding when in Premier Pro CS5.
I am wondering if it might be that I don't Java installed.
Could that be it?

Your problem is not Java, it is Dual video problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

Freezing frames in Premiere Pro

Hi,
I am new to Premiere Pro and I am creating some videos for my website. I am just wondering how to freeze a frame of the video and use the frozen frame as part of the completed video. Basically the video I am creating is a tutorial and I am using someone elses voice to explain what is shown in the video. The reason I would like to freeze a few frames is so there is plenty of room for the voice so the timing is right with the video.
Does anyone have any ideas?
Thanks,
Kerri

Ok thanks for your reply, I will read about 'Frame Hold' and exporting stills.
Thanks for your help,
Kerri

I-Frames in Premiere Pro CS4

Hello, in the book 'Real World Video Compression', the author notes that within Final Cut Pro he "may tell Compressor to insert I-Frames at specific locations, which you do by inserting a compression marker." He says he might want to do this for footage which is 'particularly dynamic.' Is there a way within Premiere Pro CS4 to insert an I-Frame at a specific location?
Thank you,
Matt

Thanks to both who responded. I'm stumped. One response stated that placing an Encore chapter marker within Premiere would result in making the frame an I-frame, and the other response stated that I needed to mark frames as I-frames within AME. In the Encore CS4 help it states that if the source is MPEG-2, then setting a chapter point will insert the chapter point at the nearest GOP header, but that if working with a .avi file, adding a chapter point will result in the frame being interpreted as a GOP header. So,
If my source within Premiere is anything other than MPEG-2, will adding an Encore chapter marker from within Premiere follow the rule as dictated by the Encore CS4 help?
If my source within Premiere were MPEG-2, would I be able to add an Encore chapter marker from within Premiere only on existing GOP header frames as implied by the Encore CS4 help?
The other poster mentioned setting I-frames within Adobe Media Encoder, but I don't see where this can be done. Is AME able to do this?
Is it correct to assume that if I used dynamic link to send a sequence from Premiere to Encore that the rules would stay the same?
Thanks,
Matt
Message was edited by: anonmous to make the questions hopefully more concise

"Reveal in project" greyed out and match frame problems (Premiere Pro CC 7.0)

I'm trying to reveal a clip in project window by right clicking a clip in timeline and choosing "Reveal in project", but the function is greyed out. Is it because the clips are merged? The clips have one track of video and 1-3 audio tracks depending on clip. When option+right click either only video or audio, i get the "Reveal in project" available, but when clicked, nothing happens.
I also have problems with match frame. When i put a new (merged) clip on the timeline, it works, until i try the match frame again on different time. So it kind of works only on the clip that was previously edited to the timeline, and only once. Works fine with regular clips.
Clips were merged using in or out point as the sync point, and "Remove audio from AV clip" checked. Audio and video sources don't have matching timecodes.
I'm using CC 7.0 on Mac OS 10.7.5.

Is it because the clips are merged?
Yes. Match Frame does seem to have issues with Merged Clips as well.

Fade in from black (pink flash in-between frames) in premiere pro cc

Hello,
when i fade in from black I get a transparent pink flash in between frames as the effect is happening. The footage has a white background which makes the color very noticeable.
I have tried key framing opacity, and using a levels, and the same result occurs.
Any thoughts?? Thank you all
I'm using a 2008 mac tower with quad core and 32 gigs of ram. Os X.8.5
Eric

CC 2014, source is 1080mts and the open CL was on. I believe that was the issue, as well as other things the way the transparency and the blacks were interacting, after turning off mercury playback it fixed the black issues. Havent been on the project in question for a while to check if that fixed the pink bars as well, though.

Premiere Pro CS6 - Project frame won't retain its layout or location between opening and closing?

I filed this as a bug, but perhaps I'm thinking through this wrong and would like to seek help.
I'm finding that the Project frame in Premiere Pro CS6 does not retain its layout between opening and closings.
Here's what I do:
1) Open a project.
2) Create several bins and populate them with media. Expand the contents of a bin by clicking the disclosure triangle to the left of the folder.
3) Undock the Project frame only.
4) Close the Project frame with Command-W
5) Use ****-1 to reopen the Project frame.
Repeat steps 4 and 5. The result is that the Project frame does not remember which bin was open. Furstratingly, it also does not retain which bins were expanded or collapsed.
And worst of all, it will also open in random areas of the screen. (The expected result is that it would reopen in the same spot of the desktop where you last closed it, no?)
I'm a big organizer -- tons of footage across many different bins. I open bins, close them, keep some open, close others... easily dozens or hundreds of times during an edit session. I'm beginnging to feel like I'm swatting flies or playing whack-a-mole just to get my bin views correct!
Or mm I approaching this wrong?

But really, the real solution for me was to not update Premiere Pro CS6 after a reinstall. The most recent updates just do not like my computer, I guess.
Figured I should post this solution here in case anyone in the future has this problem. (relevant: xkcd: Wisdom of the Ancients)
-Sam

Importing Photoshop CS2 file to Premiere Pro 1.5

I have edited a frame from Premiere Pro 1.5 in Photoshop CS2 and I have had trouble importing the edited frame into Premiere.
I perhaps thought I couldn't import it because:
a) The file size had changed.
b) The error message mentioned that it could be damaged (it said something else as well but I don't remember what it said)
c) The photoshop file had lots of layers, which I then flattened.
I'm fairly new to both programs, so may be I didn't apply the correct settings. I hope this isn't the case as I spent all day editing the frame!
Hope someone can help!!!!

Welcome to the forum.
Stepping back a bit, can you Open that file in PS?
Like Jim, I'd like to know the format of that file.
What are the full specs.of the file, i.e. pixel x pixel dimensions, Color Mode, Bit-Depth, etc.?
Cannot recall PrPro 1.5 that clearly anymore, but you should have two options, when Importing a PSD w/ Layers into PrPro, and that would be as a Sequence, with all Layers still separate, so that they can be animated, or manipulated, on separate Video Tracks, or as Footage, which will Flatten the Layers. Which are you choosing?
Good luck,
Hunt

Suddenly turn off when I open the premiere pro cc 2014

when I open the program just he let me chose the project and after that directly turn off itself.
any Help????????
important
12 G DD Ram
i7
1G display card

Moving to Premiere Pro forum
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

CS4 Premiere Pro Monitor Window, Again

I posted several days ago about the problems I'm having with displaying video in Encore and Premiere Pro in CS4. This is incrediblyl frustrating because my older versions of these products always worked fine, and still do.
I've come across an insight:
AVI files that were created by using "export movie" in my older version of Premiere Pro give me a variety of problems when trying to display them in the monitor window of the CS4 version of Premiere Pro. For example, the monitor window might be teal when I first move a clip to a sequnce. Then I click on the mintor window with my mouse and the teal is replaced by the correct image from the clip. But then I click the "play" icon below the monitor window and it becomes mostly teal, but with a few hash marks just to the right of center. At other times, the display has been different.
AVI files that were created by using the codec of Microsoft Video 1 seem to display fine in the CS4 version of Premiere Pro. I approached this two different ways. In one example, I took a clip that displayed fine in my older version of Premiere but looked like a mess in the CS4 version, and I used VirtualDub to created a converted version of it using the codec Microsoft Video 1. PPro CS4 was able to import and display the version created within VirtualDub with the Microsoft Video 1 codec perfectly. Then I took another clip that had display problems in Premiere Pro CS4, and used the "export" feature within Premiere Pro CS4 to export it to AVI, using the Microsoft Video 1 codec. I then imported that output file into Premier Pro CS4, and that too displayed perfectly within Premiere Pro.
My system config:
CS4 version of Premiere Pro, fully registered. This was an "upgrade" version, installed on a machine that had an older version of CS4
Windows XP Professional with Service Pack 3 as operating system
Sony Vaio laptop with Intel Core 2 Duo CPU
2.93 gig of RAM
I tried going to Sony's web site in search of updated display drivers, but that section of the site appears to not be working. I also tried going through the control panel's device driver dialogue and clicking "update driver" and that didn't work either. So I'm stuck with the driver versions that I currently have.
But I wonder, are my device drivers really the problem? I'm skeptical, because of the fact that AVI files created using the Microsoft Video 1 codec don't have the problem.
So how can I get the CS4 version of Premiere Pro to properly display AVI files created by my older version of Premiere Pro? I really don't want to do a labor-intensive effort of converting all my clips in all my projects to Microsoft Video 1 just to work around the poor quality assurance that appears to have been done by Premiere Pro CS4's development team.

In Premiere Pro CS4, if I pick the dialogue for File > Export > Media, it takes me to an "Export Settings" window which contains an option to select which codec to use. On my computer, there are 13 choices, including Cinepak Codec by Radius, DV (24p Advanced), DV NTSC, DV PAL, Indeo Video 5.10, Intel Indeo(R) Video R3.2, Intel Indeo Video 4.5, Intel IYUV Codec, Microsoft RLE, Microsoft Video 1, Microsoft Windows Media Video 9, Uncompressed UYVY 422 8-bit, and V210 10-bit YUV.
I don't know which codec my older version of Premiere Pro uses to generate AVI files when I use its "Export Movie" option. I just know that whatever it does, ends up displaying horribly in the CS4 version opf Premiere Pro. However, using either VirtualDub or Premiere Pro CS4 to rewrite the AVI file using the Microsoft Video 1 codec results in an AVI file that the CS4 version of Premiere Pro can play back without problem.
The distortion in the monitor window is different from one clip to the next. I'll post a few examples. In all cases, the AVI's were generated by the older version of Premiere Pro, using the "Export Movie" option.
Example Number 1
While playback is occurring (note that this one shows up as salmon-colored, which is another thing that has happened on a number of my attempts with other clips as well):
However, if I click on the square icon to make playback stop, the colors in the monitor window display properly when it stops. In this example, the clip is black and white, and here's how it looks (ie, the correct colors) after I have clicked on stop.
I'll post another message showing examples from another clip.

Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!

Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay

Displaying frames in premiere pro 2.5

Similar Messages

Maybe you are looking for