Displaying fullscreen images from camera via firewire
I have clients that want to be able to see the image I take with my camera instantly after I take it. So I hook my camera to my MacBook Pro via firewire, take the shot at the camera and then I WANT the image to appear full screen or close to full screen size on my laptop. I had one poster on another forum say that Aperture can do this. I can't figure out how. Any ideas?
You can absolutely do this - although depending on your camera it might more likely be via USB. What you're describing is tethered shooting. I do it all the time with my D300 and it works perfectly. You can set yourself up in fullscreen mode and watch your pictures come up within a few seconds of shooting.
If your camera is supported you simply plug it in (via usb or firewire - usually usb), select File>Tether>Start Session and you're ready.
When I'm shooting still life, I like to fire a shot or two, do a few quick adjustments to get the look I'm after and stamp the keepers as I go along and refine the setup. It's a great way to get a real feel for what you're attempting.
There's a list of supported cameras on the Aperture site- I don't have the link handy though.
Good luck!
Similar Messages
-
Displaying the image from camera after processing
Hi,
Using NI vision assistant I captured the image from the camera in continous mode with inline processing. Then the image was proceesed (filter,threshold and particle analysis), then I created a bounding box and integrated that with the real time video. But, the image viewer is displaying the image in binary form rather than in RGB space.
I can't find any mistake.
Please help.
Thank you.Hi illuminator,
Can you post your VI and provide some more information?
Thanks as kudos only -
How receive image from camera with PCI-bus
Hello all
Please help
me.
I have LV 7.1.1.
I wont
watch two and more images from cameras at the same time.
I have capture
card (PCI-bus) with 4 video-input.
What kind
of data must be transfered from this capture card to LV?
With respect
Aleksandr.Hello Aleksandr
please provide more information, what type of video card do you have?
Have you configure the card so you can watch an image with MAX?
I suppose the card has the ability to capture more than one image at a time is that true?, however most of the cards that I know of, have several inputs but you can only display one image at a time, you can swith between them and capture and image from another input, to capture more than one unit at a time you would need to open/close sessions with the instrument/card such that you are switching from one input to another
vicente -
Help with Sony Digital Camcorder DCR-SR42 Pulling Images FROM Camera to Mac
I need some help...I purchased a Sony DCR-SR42 camera and used it while on holiday. I can't seem to figure out what software I need to pull the movies from the camera. After MANY calls to Apple Tech support (and being told that I HAD to buy iLife 08, which I don't want to do if i can avoid it), I finally found somebody who said that I could use freeware MPEG Stream Clip to pull the videos from my camera and convert to MPEG4, then I can use iMovie HD 06. All this is with the assumption my computer recognizes my camera as a harddrive (which I'm not sure, and I'm at work without computer OR camera).
My question is this - does anybody have any experience with THIS camera (Sony DCR-S42) and what to do with iMovie 06?? Any and ALL suggestions would be GREATLY appreciated.
Thanks!
-JillYes, only iMovie 8 will accept a video stream from a hard disk camera.
All other versions of iMovie will not: they require a DV stream from tape via firewire.
In other words, your camera is incompatible will all versions of iMovie except version 8.
To convert to mpeg4, or even DV which is what iMovie is intended for, you need:
mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, as well as the the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25. -
How do you Automatically Copy Images From Camera?
I would like to create an AppleScript that will run when I plug in my digital camera. Here is what I cannot figure out.
How to make it run when the camera is plugged in.
How tow to copy images from camera to a designated folder.
Thanks!You can do all you requested - without 'AppleScript'.
01. Connect your camera launch 'Image Capture' ('/Applications/' folder - if it does not automatically launch.
02. Select the 'Image Capture, Preferences...' menu item.
03. Click on the 'General' tab.
04. From the 'Camera:' 'When a camera is connected, open:' pop up menu - select the 'Image Capture.app' menu item.
05. From the 'Devices' menu select your camera from the menu items list. A window will appear with the title of your camera.
06. From the 'Download To:' pop up menu select where to save the camera's photographs. You can select any folder anywhere on your hard disk drive(s).
07. Click the 'Options...' button, and from the drop down sheet click on the 'Connection Options' 'Automatically download all items' check box - to add a check mark. There are other options you may have be interested in.
08. Click on the 'OK' button.
09. If you want to download the photographs now - click on the window's 'Download All' button. Or, to test the above setting changes - quit 'Image Capture' and disconnect your camera. Then reconnect the camera - and watch the above setting changes take effect.
Note:
The above automatic action can also happen if the storage device of the camera were inserted into a USB digital camera card reader. So long as apply the Steps above, and you select the USB digital camera card reader from the 'Devices' menu's menu item list in Step 05 above.
'Image Capture' is not scriptable; but, may be control-able via 'tell application "System Events" to tell process "Image Capture" ....
When a camera is connect to the Mac, the storage card of the camera is mounted onto the 'Desktop' and also listed, as an alias, in the (invisible) '/Volumes/' folder.
Now that you know the name of the storage card ... you can create a 'Folder Action Script' (an example is presented below) and save it into the '/Library/Script/Folder Action Scripts/' folder,
Open the '/Volumes./' folder (in 'Finder' via 'Go, Go to Folder' - enter '/Volumes/').
Perform a right button click ('<control> - click, for single button users) on the 'Volumes' folder's window, and select 'Enable Folder Actions' (if not already).
Rpeat the right button click (<control> click) and select 'Attach a Folder Action...' - selecting your script ('Volumes_FAS.scpt' as shown below).
Below is a 'Folder Action Script' example - where you will have to substitute 'NO NAME' with the name of your digital camera's storage card's name.
-- --- Save code as a script with the name 'Volumes_FAS.scpt' --- --
on adding folder items to this_folder after receiving added_items
set myStorageCard to "NO NAME" -- The name of my 1 GB stroage card. The name of your card may differ.
repeat with i in added_items
tell application "Finder" to set tName to (name of i) as string -- Obtain name of mounted storage card.
if (tName is equal to myStorageCard) then my handle_card(i) -- If my storage card, continue processing.
end repeat
end adding folder items to
on handlecard(localVolume)
set folder_Path to ((path to desktop folder from user domain) as string) -- Path to 'Desktop' folder.
set download_Folder to "NO_NAME Photographs" -- Name of folder to store storage card's items (files and folders).
-- create download_Folder, if it does not exists.
tell application "Finder" to if (not (exists folder (folder_Path & download_Folder))) then make new folder at (folder_Path as alias) with properties {name:download_Folder}
-- Duplicate all the items (files and folders) of the storage device to the '~/Desktop/NO_NAME Photographs' folder.
tell application "Finder" to duplicate items of local_Volume to (folder_Path & download_Folder) as alias
end handle_card
-- --- End of code --- --
Review 'Finder's dictionary (in 'Script Editor') for the various ways to incorporate 'duplicate ...'.
Mac OS X (10.4.4) -
Grabing images from camera & Apply OCR To that image
Hi,
I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
I m modified some Sample NI VI's for capturing the images & for OCR.
I m new for labview. I cant understand where is the problem in the VI.
i also create a character set file for reading the characters using OCR Train
so please help me to find the solution.
Attachments:
Character reading.vi 91 KBHI.
Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
Regards.
Jonathan Cruz
CHALLENGER
K U D O S __ B I E N V E N I D O S
Attachments:
Camara OCR.vi 42 KB
11.JPG 77 KB
22.JPG 17 KB -
I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.
Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario -
How can I display an image from a shared-network folder?
Hi
Does anyone know how I can display images from within APEX that are found outside the database? What configuration have I missed?
Within Windows-Internet-Explore I can access the following image using the below URLs, BUT I cannot access it from within APEX?
What do I need to do so APEX can display theses images from our internal shared network folder?
both these URLs work within Firefox (but on APEX):
\\Saremote\UPDOWNFILES_DIR\polk_insight.gif
file://///Saremote/UPDOWNFILES_DIR/polk_insight.GIF
So within APEX I have created a "display as Text' Item that works with this "amazon image" syntax:
{lessthan} IMG SRC= {doublequot} http://g-images.amazon.com/images/G/01/associates/navbar2000/logo-no-border(1).gif {doublequot} {greaterthan}
BUT sadly not with my image:
{lessthan} IMG SRC= {doublequot} file://///Saremote/UPDOWNFILES_DIR/polk_insight.GIF {doublequot} {greaterthan}
Any ideas would be appreciated.
Thanks
Steve
Edited by: [email protected] on Sep 12, 2008 8:30 AM
Edited by: [email protected] on Sep 12, 2008 8:31 AM
Edited by: [email protected] on Sep 12, 2008 8:32 AM
Edited by: [email protected] on Sep 12, 2008 8:33 AMIf you have a local html file, or open an image locally from the menu, then yes, it works, but with web pages that are served from a remote location (web server), security kicks in and prevents the web page from accessing local files (and files on a networked drive).
you will either have to put the image on the web server and access it through http, or you can load it into the database/workspace images and access it that way. -
Connecting DV camera via firewire disconnects external firewire drive
All of a sudden this has started happening.
When i connect my video camera via firewire to my external Lacie harddrive, and turn the camera on, the drive I have it connected to goes off line. A window come up saying 'Device Removal'. When I disconnect the camera, the drive comes back online.
I have 4 drives connected inline and it happens to any one of them, whichever I attach the firewire to.
I trashed FCP permissions, but that didn't help. I'm running FCPHD 4.5.
Any ideas?
PowerBook G4 15 Titanium Mac OS X (10.3.9)Its the canon camera. Firewire and canon cameras apparently don't play in the same sandbox very well. All macs have only one firewire bus. For a macbook pro you can use an express card slot, but the imac's you are kinda stuck. The best course of action is to copy to hard drive and then move it within imovie. I read this in Tom Wolksy's book on FCE. It is weird. I have a Sony HDV and an older imac and i can use one firewire port for importing and go straight to an external firewire drive--no problem. However, in his book on page 56. It states the firewire issue. I know this is an imovie forum, but i can assume its also the same for imovie.
-
Can i display all images from databases with adf jsp
hi
I want to display all images from the databases whit adf bussines components, because with the sample on http://www.oracle.com/technology/training/products/intermedia/index.html page, i only can display 10 images. i'd lije to know if i can to search in the databases by the id of the image.
this is the code:
%@ taglib uri="http://xmlns.oracle.com/adf/ui/jsp/adftags" prefix="adf"%>
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c"%>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html"%>
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>untitled</title>
</head>
<body>
<html:errors/>
<table border="1" width="100%">
<tr>
<th> </th>
<th>
<c:out value="${bindings.ImagenView1.labels['Id']}"/>
</th>
<th>
<c:out value="${bindings.ImagenView1.labels['Descripcion']}"/>
</th>
<th>
<c:out value="${bindings.ImagenView1.labels['Image']}"/>
</th>
</tr>
<c:forEach var="Row" items="${bindings.ImagenView1.rangeSet}">
<tr>
<td>
<c:out value="${Row.currencyString}"/>
</td>
<td>
<c:out value="${Row['Id']}"/>
</td>
<td>
<adf:render model="Row.Image"/>
</td>
<td>
<c:out value="${Row['Image']}"/>
</td>
</tr>
</c:forEach>
</table>
</body>
</html>I think you want the interMedia JSP tag library...
http://www.oracle.com/technology/software/products/intermedia/htdocs/descriptions/tag_library.html
Larry -
After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
I've loaded thousands of photos on my IPad and never have had that problem.
Don't blame a moment of carelessness on your device.
If you want to make such a suggestion to Apple use http://apple.com/feedback -
Camera software not opening to transfer images from camera to computer. What to do?
My PowerShot 720is software ZoomBrowser EX not opening on computer. No images load and I don't have option to click on "connect to camera" so I can transfer images from camera to computer. Message says "Zb Module has stopped working. Windows is looking for a solution to this problem." Anyone have this happen and know what to do?
Thank you!Hi BLG,
If you haven't already done so, please update your software for Windows 7. Here's how.
Just click here to access the software updates for your camera. Once there, just enter your operating system, then the version of the operating system. Now click on "Software" to show the software updates.
Click on "ZoomBrowser EX 6.9.0a Updater". Installation instructions are on the next page. Also, please download "CameraWindow "DC 8.8 for Windows" to your desktop.
After accepting the required disclaimer, please download the program update to your desktop.
After downloading all the software you choose to install, please install ZoomBrowser last. This will allow it to link to the other Canon software on your computer.
Since you've installed an older version of software, you may now double-click on the program update to install it. If not, just put the CD-ROM in your computer's optical drive and stop any installation program that starts.
If you've already updated the software for Windows 7, please contact us for assistance. Click here for contact options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
How do i delete images from camera after importing
how do i delete images from camera, ipad, iphone after importing the files into aperture3?
Image capture will allow you to delete from the device after import, but I believe it is by design that Aperture does not do this as it is recommended (in the case of a camera) to use a device's own delete function rather than a 3rd party like Aperture. This also allows time for a proper backup before everything is erased from the device?
-
Capturing images from camera and uploading to sharepoint library automatically.
Hello Everyone,
My requirement is to capturing images from camera and uploading to sharepoint library automatically. No manual uploading will take place.
Please suggest me.
Thanks,
RajeshHi,
From your description, my understanding is that you want to capturing images from camera and uploading to sharepoint library automatically automatically upload images to SharePoint library.
You will save images in your local computer after capturing visitors’ image. You could develop a custom timer job to periodically get pictures from the local folder in your computer. Please refer to this article:
Create and Deploy Custom Timer Job Definition in SharePoint Programatically
http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
you could upload pictures to your SharePoint from the folder with C# code, please refer to this article:
How to: Upload a File to a SharePoint Site from a Local Folder
https://msdn.microsoft.com/en-us/library/office/ms454491%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Capture images from Camera directly at high resolution
Hello Users,
I want to capture images from Camera directly at high
resolution. The problem is that although I am able to capture
images from a Video Object, but the images are small because the
Video size is only 160x120. So if I am able to capture directly
from Camera, I am sure to get a higher resolution images at which
the camera is capturing.
Any help in this matter will be of great helpHello Users,
I want to capture images from Camera directly at high
resolution. The problem is that although I am able to capture
images from a Video Object, but the images are small because the
Video size is only 160x120. So if I am able to capture directly
from Camera, I am sure to get a higher resolution images at which
the camera is capturing.
Any help in this matter will be of great help
Maybe you are looking for
-
For example, I saved a jpeg named 'picasso the guitarist'. I have folders titled A to Z. When I click 'save as' it might open the 'K' folder and I have to manually search the 'P' folder for 'Picasso' and save file. The most irritating thing is, when
-
Problem generating index with 2th level in cs4
Windows XP sp 3 - Indesign CS4 601 When generating an index with a 1st and a 2th level, in the 2th level the entry of the 1st entry is always repeated. E.g. the index should look as this: text 75 capitalized 76 import 78 word
-
Error message when connecting ipod nano
My ipod nano has been working just fine, then today when I connected it to my computer I got this message: "You have inserted a disk containing no volumes that Mac OSX can read. To continue with the disk inserted, click 'ignore'." Then you can click
-
Why does Sharing Preference open Unlocked when it is Locked before shutdown
Several times over the last few days I have checked the Firewall and found that it has been unlocked after I lock it - without my using a password to unlock it. The first time I found "Network" checked, so I unchecked it and thought it was a fluke, t
-
I'm learning ABAP from the book Introduction to ABAP/4 Programming for SAP by Gareth M. de Bruyn and Robert W. Lyfareff and read now that SQL SELECTs run like loops. I worked with SQL before and didn't have that idea in mind, I wonder if this is some