Displaying graphic on different systems on a smartform

Hi
I have a graphic that I want to display on our Development and Test system but not display it on our Production system.  I know I need to put a condition in the conditions tab of the graphic but I am unsure what variable to put there.
any ideas?

Hi,
I have a perfect solution for you. Pls find below steps.
1. There is system variable called SY-SYSID (Name of the SAP System). Pls check the name of the SAP system in your all systems (In Dev, Testing & in Prod)
2. Now put the condition in condition tab like: SY-SYSID (Relation operator) 'DEV' ---> Put [*] pattern in your case. Same write the condition for 'TESTING' in the same tab.
It is clear now? Let me know.
Regards,
Lokesh.

Similar Messages

  • As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

  • Display Graphics is not working in ECC 6.0 EHP5 SAP System

    Hello All,
    We have an SAP system running  on ECC 6.0 with EHP5 installed in it.
    In UDM_Supervisor when i click on ALV Display Graphics it is not opening it is throwing the below mention error.
    When i click on the highlighted icon on the top it throws the below error.
    When i click on there is no additional information available.
    I could not locate any  Relevant SAP notes.
    Could you please help me in fixing this error.
    Thanks in advance!!!
    Regards,
    Vardhan.

    Hi,
    I don't have access to my ECC 6 system right now, I would check 2 things:
    1) it is possible that the BAdI definition class (for classic BAdIs, it is usually CL_EX_BATCH_MASTER) has been changed manually by SAP, and they removed the LOOP, or have added an EXIT right before the ENDLOOP. I know they sometimes do it.
    2) I would check if the BATCH_MASTER classic BAdI has been migrated to new BAdI, in that case I think you should migrate your BAdI implementations
    3) Just to be sure: if an implementation raises an exception, that's normal that the other implementations are not executed.
    BR
    Sandra

  • How to display more than 132 characters in a smartform

    Hi Experts,
    I am reading notes/text entries by calling read_text and then passing them in a variable. I want to display the notes. But even after declaring the variable as  LINE2048, it is displaying only 255characters as output length in smartform.
    My code:
    TYPES: BEGIN OF TYP_FINAL,
             PARTNER_NO      TYPE BU_PARTNER,         "Partner No.
            OBJECT_ID       TYPE CRMT_OBJECT_ID_DB,  "Object ID
            PROCESS_TYPE    TYPE CRMT_PROCESS_TYPE,  "Activity Type
           ACTUAL_NOTE     TYPE LINE2048,           "Actual Notes
           END OF TYP_FINAL.
    data : T_FINAL           TYPE STANDARD TABLE OF TYP_FINAL,
              WA_FINAL          TYPE TYP_FINAL.
    data:  v_actualnote     TYPE LINE2048.
              CALL FUNCTION 'READ_TEXT'
                EXPORTING
                 CLIENT                        = SY-MANDT
                  ID                            = C_0002
                  LANGUAGE                      = sy-langu
                  NAME                          = l_name1
                  OBJECT                        = C_BUT000
                TABLES
                  LINES                         = t_line
               EXCEPTIONS
                 ID                            = 1
                 LANGUAGE                      = 2
              IF SY-SUBRC = 0.
               clear: v_accountnote.
               LOOP AT T_LINE INTO WA_LINE.
                 CONCATENATE v_accountnote wa_line INTO v_accountnote SEPARATED BY space.
                 clear: wa_line.
               ENDLOOP.
              wa_final-account_note = v_accountnote.
              clear: v_accountnote.
             ENDIF.
    On the smartformm side, under main window->loop->text(to display the variables).
    How to display more than 255 characters in a smartform.
    Regards,
    Sangeeta.

    why the heck would you use read_text when you want to print a text/note on a form?
    in SAP-Script we use the "INCLUDE"-Statement for this.
    and in smartforms a Text-node of type 'I'.
    you can not write all in one line and expect the system to handle this like a floating text.
    one character takes a cretain amount of space (varying for different characters and font and font sizes).
    you Page has a certain width, so where is the miracle in the thesis that on a sheet of paper with a certain width just a certain amount of characters will fit?

  • Displaying English and ARABIC language on a smartform?

    Hi All,
    Hi Folks, I have an issue printing two different languages on a smartform; I should print English and One more language of ARABIC style (RIGHT TO LEFT). In Debugging mode i could see the Arabic Text exactly in the format which i have entered but when i print it takes the other way.
    For Ex: ABCD - (Fyi - this is of Arabic Language dialect)
    o/p: ( i m getting) DCBA
    i tried with Text Include n Text Element during debugging i could see the data as DCBA but when i print the system (MS Tools - Word) are recognising the Language is of Arabic and its automatically changing the cursor position to the end ((**I found this in XML Format of Smartform)). so the form is printing from the new cursor position i.e A; and its displaying the output as ABCD.
    Note: I have no problem with List, Screen Etc. except "Form".
    Please Advice me. Thanks in Advance.

    Shekher,
    Check the printer device type you are using.
    For printing the Arabic output you need the printer defined using ZARSWIN device type. Ask the Basis consultant to do the same.
    Regards..

  • Prevue Doesn't Display Graphics

    My copy of Preview has stopped displaying graphics. It displays PDF's just fine. It doesn't seem to matter whether I invoke Preview by opening it and dragging a graphic to it, or by double-clicking on a graphic with Preview launching itself. Such graphics don't show up in the "Open Recent" list, presumably because they were never opened. On the other hand, when attempting to open graphics files from the File menu, graphics files are still recognized as eligible for selection.
    Any ideas on what's up? On a fix?
    Thanks in advance ...
    Message was edited by: Roger Diggle

    Thanks for the helpful reply.
    It wasn't a permissions issue, though.
    No ...
    (As is so often the case, the answer to one question simply bring s up another ...)
    I had a perfectly good copy of Preview right there in my Applications Folder. Somehow, my System found a busted copy, on a different partition, left over from a nasty crash caused by a nasty Kernel Panic. I eventually discovered that it was not running the expected copy.
    So ... why would the system wander off to another partition to find a different copy of Preview (and a broken iPhoto, too!) instead of the one in its own partition's Apps Folder? I thought only humans did things like that.

  • Adobe - inconsistent output on different systems

    Hi,
    I am converting my smartform output to PDF and this output I am displaying as PDF file in print preview. In some of the PCs, occasionally, the output does not appear in the print preview(Adobe Reader). A pop up box in adobe reader appears that does not have any text. The pdf file also does not have any output in it.
    What can be a possible reason? This is inconsistent behaviour. Because the output displays correctly on other PCs or the same PC after a period of time for the same input.
    The internal tables are being properly refreshed.
    We are using ECC 6.0, Adobe version 9 and Windows Vista.
    Regards,
    Abdullah Ismail

    the data processing is correct. I debugged the program on two different systems. The debugging results are always similar.
    The pdf is displayed in a custom control container.
    The following code returns code 0.
      data: pdf_html_control type ref to cl_gui_html_viewer.
      call method pdf_html_control->show_data
        exporting
          url = l_url
        exceptions
          others = 1.
      if sy-subrc <> 0.
        raise cntl_error.
      endif.
    Thanks,
    Abdullah
    Edited by: Abdullah Ismail on Jul 22, 2009 5:12 PM

  • Need guidance in displaying graphics shapes on image

    I would like some help drawing a circle over an image which is displayed in JScrollpane through JLabel, The goal is, whe we click over the image, the image apperas with a small circle in the place we have clicked. I have used JLabel for displaying image in JScrollpane by using imageLabel.setIcon(new ImageIcon("default.jpg"));
    I need to draw circle/rectangle when i click on image by this i need to select different points in the image by drawing circles/rectangles over the image.
    If you understand my problem than please guide me for the same.
    Thank you

    Don't post the same question multiple times. It's rude, as it leads to people wasting their time duplicating each others' answers.
    http://forums.oracle.com/forums/message.jspa?messageID=9385315#9385315
    http://forums.oracle.com/forums/message.jspa?messageID=9385314#9385314
    Need guidance in displaying graphics shapes on image

  • Unable to compare the same program in different systems

    Hi,
    We have a Development & QA system (apart from Production). Now for a program that is in both, Dev & QA, I wanted to compare them using SE37. I clicked on "Compare Different Systems"  button. Now I selected the program from Dev for Left-Justified & from QA for Right. When I hit the "Display" button, it gave me the following error message:
    Error remote access: Error during the retrieval of the logon data store.
    Can anyone help me with this?
    Thank you.

    Hi Jack,
    I went to SM59 & double clicked on my RFC (that I thought would work). It took me to the RFC destination config. screen & it showed me the following message:
    User password invalid for identifier /RFC/---- (see long text)
    ( the dotted lines denote the RFC name )
    It's not shown with a red cross mark. It's shown with a Green tick mark. So how do I correct this now & be able to compare the proram? Please let me know.
    Thank you.

  • How to display graphics larger than canvas size?

    How do I display graphics larger than canvas size in Java AWT?
    I tried setting the canvas size() to a value larger than my monitor size, and then adding scroll bars to the canvas, but the scroll bars and the canvas won't go beyond the monitor size in pixels, which is only 800, so the large graphic I try to display gets cut off at the bottom.
    How can I overcome this problem? Has anybody encounter a similar dilemma before?

    import java.awt.*;
    import java.awt.event.*;
    import java.awt.geom.*;
    public class AWTSizing
        public static void main(String[] args)
            LargeCanvas canvas = new LargeCanvas();
            ScrollPane scrollPane = new ScrollPane();
            scrollPane.add(canvas);
            Frame f = new Frame();
            f.addWindowListener(new WindowAdapter()
                public void windowClosing(WindowEvent e)
                    System.exit(0);
            f.add(scrollPane);
            f.setSize(400,400);
            f.setLocation(200,200);
            f.setVisible(true);
    class LargeCanvas extends Canvas
        int w, h;
        final int PAD = 10;
        Rectangle r1, r2, r3;
        Rectangle[] rects;
        boolean firstTime;
        public LargeCanvas()
            w = 360;
            h = 360;
            firstTime = true;
        public void paint(Graphics g)
            super.paint(g);
            Graphics2D g2 = (Graphics2D)g;
            g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                                RenderingHints.VALUE_ANTIALIAS_ON);
            if(firstTime)
                initShapes();
            g2.setPaint(Color.red);
            g2.draw(r1);
            g2.draw(r2);
            g2.draw(r3);
        private void initShapes()
            r1 = new Rectangle(w/4, h/4, w/2, h*3/4);
            r2 = new Rectangle(w/2, h/2, w/2, h/2);
            r3 = new Rectangle(w*5/8, h/6, w*3/5, h*2/3);
            rects = new Rectangle[] { r1, r2, r3 };
            firstTime = false;
            invalidate();
            getScrollPane().validate();
        private ScrollPane getScrollPane()
            ScrollPane scrollPane = null;
            Component c = this;
            while((c = c.getParent()) != null)
                if(c instanceof ScrollPane)
                    scrollPane = (ScrollPane)c;
                    break;
            return scrollPane;
        public Dimension getPreferredSize()
            Dimension d = new Dimension(w, h);
            if(rects == null)                   // before calling initShapes
                return d;
            Rectangle r;
            for(int j = 0; j < rects.length; j++)
                r = rects[j];
                if(r.x + r.width + PAD > w)
                    d.width += r.x + r.width + PAD - w;
                if(r.y + r.height + PAD > h)
                    d.height += r.y + r.height + PAD - h;
            return d;
    }

  • Display problem from different domain

    Hi
    I am not able to make my display(DISPLAY variable). When I m exporting the display variable from the same domain as the linux box is present. It is working fine but when I trying to export the DISPLAY variable from different domain and use the GUI. it is throwing error. Please help. Also I am able to ping from my window machine to Sun Solaris
    operating system: sun solaris 9 (5.9).
    Error Message:
    (gnome-calculator:5511): Gtk-WARNING **: cannot open display:
    Can anybody tell me how and what all we need to check to configure DISPLAY.
    I mean the software required and firewall configuration.

    I trying to export the DISPLAY variable from different domain and use the GUI.Different domain or different network?
    I am able to ping from my window machine to Sun SolarisPing means nothing in this case because:
    1. ICMP =! TCP
    2. You need to have allowed connection from Solaris to your local machine (port 6000) and ping is not capable to check that.
    3. You need to check this on/from server (Solaris)
    Or you can use X11Forwarding so you don't need to allow connection as mentioned above.
    I mean the software requiredDo you mean client SW or what?

  • UWL Workitems from different Systems in a sequence

    Hi ,
    is it possible to show UWL items in a sequence from different systems.
    I mean if i have a workitem   xx coming from system ABC and another YY coming from DEF
    it must appear in UWL as
    xx
    YY
    Please let me know is it possible and what is the procedure.
    Thanks,
    Anil

    Hi Anil,
    The display happens for a user based on the sorting properties from within the personalization as one other poster mentioned.  However this is personalization per user.  To do this for everyone, the sortby properties would need to be changed in the XML
    file.  I was thinking sorting by systemid, subject and sent field MAY do this for you.  However, I'm not quite sure but as the previous poster mentioned, it would be worth trying this first with your id, then possibly overriding the standard xml file by putting the sortby parameters for systemid subject & sent in the DefaultView or creating your own custom view and putting the sort parameters there.  This is just an idea and it would be worth testing with your id first.  Here is some additional information on the Personalizing the Universal Worklist display:
    http://help.sap.com/saphelp_nw70/helpdata/en/50/f5b3e1ad524c54a94fa768a648e232/content.htm
    Best Regards,
    Beth

  • Display graphics in sapscript

    Hi All,
    I am not able to display graphics in sapscript of 4.6b system. Please
    clarify.
    Regards...

    Hi,
    Here is what I did to create and include a logo in a SAPScript form (4.7)
    A. Created TIF image of the LOGO and loaded logo into SAP
    CREATING LOGO: (I used only PAINT and Kodak Imaging for Windows)
    1. Create LOGO in Word
    2. Capture with Hyper-Snap (that?s a screen capture package) and put into PAINT
    3. Save PAINT as BMP, as type:?24-bit bitmap? (this is the only way it worked)
    4. Open bitmap in Imaging for Windows
    5. Save as TIF
    Note: Have to play around in PAINT to get the right logo size
    LOADING LOGO INTO SAP
    1. Run RSTXLDMC
    2. Fill in the following parameters:
    3 Filename: Path and name of the TIF file (it?s on your PC)
    4 Type: BMON (default)
    5 Resolution for grapic (dpi): 600
    6 Graphic resident on printer: OFF (default)
    7 Text Name: ZHEX-MACRO-LOGO-PHAC (whatever)
    8 Everything else: default
    Cheers.......

  • MSI N210-512D2 Vid card doesn't display graphics with MSI z77ma-g45 motherboard

    New Motherboard: MSI z77ma-g45
    New Card: N210-512D2
    Does not display graphics.
    I stick a HIS Radeon HD 5450 in the MB and its fine.  I stick the N210-512D2 in a old dell and it's fine.
    Whats making the N210-512D2 Card incompatable with z77ma-g45 motherboard?

    Using it along an AMD card is quite useless and therefor results maybe wrong. Try the 210 alone in the other slot. Also please list system specs: >>Posting Guide<<

  • Not able to display data in different columns using Unicode encoding

    Hi,
    Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
    Please let me know how to display data in different columns using Unicode encoding in Excel sheet.

    Hi Venkat,
    After extracting data into DSO check the request whether active or not.
    Check data in DSO in contents.
    If is there any restrictions on info providers in Queries.
    Let us know status clearly.......
    Reg
    Pra

Maybe you are looking for