Displaying gray over screens that it should not display. Why

When I go to the following web site using Firefox and select the support button the following occurs.
1. The support page comes up for about 3 seconds.
2. And then an old Gray-over screen comes up that takes up about 90% of the Page. Short of closing the page or clicking a link with in the 10% that is showing, nothing can be done to close the gray-over-screen. This Problem does not occur when I use Explorer.
http://www.wondershare.com/
3. I almost always get an server error if I try to use active controls that are available.
I believe that this error is being caused by both a problem with Firefox and the Wondershare website. The wondershare people are leaving behind a old files that are not linked in the sub-directory that is used for the linked files. Then somehow Firefox is reading the old files where Explorer is not.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Similar Messages

  • ]The requirement is  that users should not allow  them to save if the indic

    hi guys
    when  u are doing GR in  the excise tab page  if u find an <b>icon (yellow one</b>) called <b>more data</b>  if  u click that one  u  go  to other screen where u will find a <b>tab page </b> named <b>miscellaneous</b> ther u can see <b>MRP indicator</b> check.
    <b>The requirement is  that users should not allow  them to save if the indicator is not ticked</b>.
    help me  guys
    kiran

    You can either use Tcode NACE for output procedure pr follow following path in SPRO:
    IMG - SD - Basic Functions - Output control - Output Determination - Maintain Output Determination for Billing Documents - Maintain Output Determination Procedure
    There for your output procedure used for the desired output type maintain requirement routine as 62 : Billing doc released to acctng.
    This requirement is met if the billing document is complete checking the header, pricing, and all items and has already been passed to financial accounting. The requirement also checks that the document is not relevant for an invoice list. This requirement can be assigned to billing document output condition types that should only be processed when the billing document is complete and forwarded to accounting. This requirement can only be used with billing documents.
    Regards
    JP

  • I have recieved an e-mail seemingly from Apple that has gone straight into my spam. It says that someone has used my Apple ID to sign into iClous on an iPhone 4. There is a lionk to follow to check my details.  I am assuming that I should not so this?

    I have recieved an e-mail seemingly from Apple that has gone straight into my spam. It says that someone has used my Apple ID to sign into iClous on an iPhone 4. There is a lionk to follow to check my details.  I am assuming that I should not so this?

    You can forward the email to Apple at the link below.
    [email protected]
    Also check out the article below.
    http://support.apple.com/kb/ht2075

  • How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09?  I understand that I should not have a page break mid paragraph but that is what I want.

    How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09?  I understand that I should not have a page break mid paragraph but that is what I want.

    Hi stephanie,
    These are unrelated questions/statements.
    Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
    Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
    You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
    Regards,
    Barry

  • Application difficulity, realistate, map showing listings will not appear... just a grid pattern, what did i turn off that I should not have?

    Hello,
    Seems like Apple will not help me accept with their hand out and money in it!
    Not enough that I put out like $800.00 for my Ipad Mini they need cash to answer the most basic for questions.
    What did I turn off that I should not have.
    Realistate Application was working fine but now does not show Geo local map with the dot showing the graphical location of the listing

    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • ICloud, Settings greyed out - screen that says 'Account not Verified'

    Hello, I upgraded my iPhone with latest OS and didn't setup my iCloud upon activation.  Now when I go to my Settings and go to iCloud, I get a greyed out screen that says 'Account not Verified' 'Check your email for instructions', but none come???  Can someone tell me how to get it activated any other way?

    Hi LindaMurray,
    Thanks for visiting Apple Support Communities.
    You may find this method helpful for verifying your email address:
    Associating and verifying email addresses with your Apple ID
    http://support.apple.com/kb/HE68
    How to verify the primary email address for your Apple ID
    When you first create an Apple ID (using your email address) a verification email will be sent to that address. If you sign in to your Apple ID from the link in that email, the email address will be verified as the primary email address for your Apple ID. You can also resend the email verification if the email address is not verified:
    1. Sign in to My Apple ID to manage your account information.
    2. Click Resend under Primary Email Address.
    3. Verify your changes by following the link in the email you will receive from Apple and signing back in to your account.
    Cheers,
    Jeremy

  • HT4623 i cant open my iphone, its showing that ( iphone is dsabled, connect to itunes) when i connect to itunes its showing message on computer screen that ( itunes could not connect to the iphone, because it is loked with passcode. you must enter your pa

    I cant open my iphone, its showing that ( iphone is dsabled, connect to itunes) when i connect to itunes its showing message on computer screen that ( itunes could not connect to the iphone, because it is loked with passcode. you must enter your passcode on your iphone to connect with itunes.
    appreciated

    Place the iPod in recovery mode and then restore the iPod to factory defaults/new iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Good .. I would like to work together I have an iphone 63gs 16gb, I do not read the sim card in itunes gave him the option restore and now I get on the screen that you can not do iphone activation would help me. I'm from Colombia

    Typgood .. I would like to work together I have an iphone 63gs 16gb, I do not read the sim card in itunes gave him the option restore and now I get on the screen that you can not do iphone activation would help me. I'm from Colombia

    Activation requires a SIM card.
    Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

  • Is it not a myth that roles should not be assigned!

    Is it not a myth that roles should not be assigned (auto provisioned) via GRC if user ids are locked? My understanding is roles will get assigned (auto provisioned) to user ids irrespective of user id being locked or unlocked? Thanks

    Hi Raju,
    nope it doesn't. You might be able to set up a mapping for the status but I never tried that.
    Regards,
    Alessandro

  • Why do I have to pay for a charge that I should not of been charged then wait for the credit in two to three billing cycles? If I don't pay it I get charged $5 a month late charge?

    So I spent a considerable amount of time on the phone with Verizon about charges on my wireless bill. The conclusion of it was: Pay the charge and we will credit the charge or it will show as a balance due with a $5.00 late fee every month. I got two phones on a promotion in November. Part of the promotion was no activation fee. Got my first bill and a $70.00 activation fee was on it. On line chatted with Verizon and they said it would be credited in two to three billing cycles. I paid my bill minus the activation fee. This month I have a $5.00 late fee and a $35.00 restocking fee because they messed up and sent three phones and I returned one. It was not activated. They might credit me that money back. What is going on?????

        I am so very sorry for any aggravation you've experienced getting your billing straightened out, Nunu1957. It's true that it can take 1 to 2 billing cycles for some account balance adjustments to appear on a statement. While I know you'd rather not have paid your activation fees, the terms of your agreement do require you to do so in order to avoid late fees or even involuntary service interruptions.
    I am concerns about the restock fee. If the device was sent to you in error, you should not have been billed a restock fee. You stated that there may be a refund for the fee. Has that been confirmed?
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • What do I need to do to power off my Ipad.  It has a message on the screen that it has not been backed up by icloud for two weeks and will not respond to anything.

    I charged my Ipad last night and this morning there was a message from icloud that it has not been backed up for two weeks.  I tried to click the ok but it will not respond.  I cannot even power off the Ipad.  Does anyone know what I should do?

    A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons and await restart. No content will be affected.

  • I am running the most upto date version yet it still tells me that I am not? Why?

    Hi, on the home page just under the google search bar in the middle of the page I keep getting the message that I am not running the latest version of Firefox and not getting the most from the web. When I click the link it takes me to the advert for the Android version and the latest version of Firefox. I have the latest version and just in case I downloaded it again, and yet, I still get this little message saying I dont have the latest version. Its not a problem for me but I just wondered why my computer is not picking up that I have the latest version. I also have the computer set so that it takes all upgrades to the software.
    Regards
    Howard Masters

    Advanced search
    Thanks for your reply, however, I know that my browser is detecting correctly and I am running the latest version, but, what I am questioning is, why do I still get this message below the Google search bar in the middle of the screen? Cheers,
    You're not on the latest version of Firefox. Upgrade today to get the best of the Web!
    About Mozilla - Firefox Support

  • My Ipod Touch 5 got a long red line all of the sudden on the screen and i do not know why

    Hello,
    So i have purchased my Ipod Touch 5 through apple. The thing is, i do not know why a red long line appeared on my screen all of the sudden. It has not fallen at all so i was just wondering if there is the possibility of sending my ipod into apple and getting another one since i have warranty.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • I can't update or Re install the new Firefox on my win 8.1 system. The setup up that downloaded is not working, why?

    The setup up that downloaded is not working.

    If the file has "stub" in the name, it needs to connect back to the server for additional files. Some firewalls block that. Try installing the full installer from the following page (scroll down for your preferred language):
    https://www.mozilla.org/firefox/all/
    Any luck?

  • Validate that user should not enter more than specified number of digits/chars?

    Hello
    First case: I have placed a TEXT field on the form. Now i want to put the below validation,
    1) User has to enter only numbers (no decimals)
    2) Only 10 digits
    If not i need to
    1) Alert app.alert
    2) Make the field either CLEARIng or considering & resetting only the first 10 digits (if user entered more than 10 digits)
    2nd case: Same as above, a TEXT field, but, the data is with a DECIMAL notation, the allowed lenghts are as
    2 digits as prefix to decimal
    2 digits as suffix to decimal position
    example, 35.88
    Pls. let me knw the Java Script for these 2 cases or do you suggest me PATTERN validation if so, can i CLEAR or reset  and if so, pls. let me know under which TAB(Display / Edit / Data) i need to put the PATTERN validation?

    Firstly if you are only allowing numbers then the field should be a numeric field not a text field. You can use patterns to allow only whole numbers or to have 2 digits on either side of the decimal.
    In regards to the number of digits you can use the len function to determine the length of the data and if it is too long give a message or clear it.

Maybe you are looking for

  • Creating a gif with images

    I am using CS6 and I need to create a simple GIF using three images. This GIF should step through these three images. Is there a help file or tutorial that can show me how to do this?

  • String encoding

    Hi, I'm sending a few strings to the DB through a JDBC PreparedStatement, and it looks like it's sending them to the DB using a wrong character encoding. It's connecting to an Oracle i9 DB. Wondering, is there anyway to conifigure what encoding the d

  • Comparison of 9.2.0.8 text features with 10.2.0.3

    Hi! We are using oracle text (9.2.0.8) at one customer (CLOBS + BLOB CONTEXT indizes)! Which new oracle text features (which really work properly) could motivate us to migrate to 10.2.0.3? If someone has already experience with oracle text in 10gR2 p

  • How can I import my address book from aol and hotmail email to my iphone

    How can I import my address books from my aol and hotmail accounts to my Iphone4?

  • Java3D applet deployment -- download extension

    Hi, I need to deploy an applet using Java3D package. Trying to avoid the installation hassle (on the client side), I want to put the three packages available on the server (j3dcore.jar, j3dutils.jar, vecmath.jar), and then add the class path of these