Displaying inspection lot (not posted in inspection stock) as mrp element

Hi guys,
we are implementing SAP QM. Our problem is that we are not using the inspection stock because we are also implementing a non-sap warehouse system. So we are not posting our goods receipt which have to be inspected in inspection stock but the inspection lot for the material is generated. Now we want to display this inspection lot in the transaction MD04. We suspect that we have to injoin in coding which we want to avoid. Has anybody of you experience or information with this issue? If yes I would appreciate your help a lot.
Thanks for your help and answers in forward. Of course I reward all answers with points.
BR,
Bernd
Message was edited by:
        Bernd Korder
Message was edited by:
        Bernd Korder
Message was edited by:
        Bernd Korder

Hi Ymreddy,
thanks a lot for your answer. Unfortunately the situation is as i had explained. We are implementing SAP QM and we also have to link a external warehouse-management-system with our SAP-system-landscape. So if we want to post the goods receipt, which has to be inspected by quality department, in our warehouse manangement system, we cant post anything if the goods are on inspection stock. Goods in inspection stock can only be posted out with usage of the UD (usage decision). But the goods receipt place in reality is too small for waiting of this decision from quaility and so the goods have to be posted in the warehouse. Because of this situation we can not use the inspection stock. If we would use SAP WM we would not have this problem. We handle this problem in using restricted batches for the goods receipts. So we can post the GRs in the warehouse system but you can not use it if the usage decision is not made. I hope i have made the situation a bit clearer to you now.
My problem now is, that the material requirements planning team wants to see in MD04 the goods which are in a inspection lot as you can see it in standard if you use inspection stock for these goods. But if the goods are not posted in inspection stock with the inspection lot you can not see it in MD04, unfortunately. My question is, are there any user exits, customizing settings or any experiences/ideas of you to handle this problem?
I appreciate your help a lot. So thanks for your help in forward.
BR,
Bernd

Similar Messages

Phy Inv Document not Posted for QA stock.

Hi all,
I created Inventory Document for QA stock and Counted But when i try to Post the document on MI07 , I am getting Warning message :"Non-selectable items have not been counted, or not completely".
Please let me know , How to proceed to Post this document..
I counted the document and is there any thing i missed out.
I hope for the best and really appriciated ...
Thanks
Regards
-Ram.

HI,
The process of physical inventory can be divided into three phases:
1. Physical Inventory Preparation - MI01
Create a physical inventory document.
Blocking Materials for Posting
Print and distribute the physical inventory document.
2. Physical Inventory Count - MI04
Counting stocks
Entering the result of the count on the physical inventory document printout
3. Physical Inventory Analysis - MI07
Entering the result of the count into the system
Initiating a recount, if necessary
Posting inventory differences
Have you selected freeze book inventory.
Thanks & regards,
Kiran

PCA posting for Special stock through WBS element

Hi,
The scenario consists of special stock transfer from one plant to another through the WBS element. The PR is getting generated from PS. the issue that I am facing is that the PCA document is showing a posting being made to a GL account which is different from that being specified in 0KEK.
I would appreciate if any body can shed some light on how to tackle it?
Regards
Kabir

Hi Shekhar
In order to settle project to Asset you have to ensure that you have an asset class which has a tick for investment measure. once you create an asset class which manages investment measure , you should be able to that particular asset class. you can then further settle asset from this asset class to any other asset class.
hope this help you
thanks
sanjeev

Inspection lot summary after UD and stock posted

lot summary level '2' had maintained in material record, when GR, lot summary work rightly.
But after UD and stock post to unrestricted stock and new GR, no inspection lot generated and stock were posted to unrestricted stock directly.
My question is ,why system does not generate new inspection lot?
I also found it in document that , lot summart does not take place if "A previously created inspection lot has already been completely credited from the stock", is that means system will create new lot in this situation?
Regards,
Denis.

Denis,
After UD
If the UD is accept, SAP will not create new inspection lot.
If UD is reject SAP will create a new inspection lot.
If UD is not made but 'Qty to be posted' is zero then also SAP will create new inspection lot for subsequent goods receipts.
AKM

Inspection type 08 not posting stock to QI

Hi Friends ,
I have activated inspection type 01,08 for a material in the sending plant and 01,08 in receiving plant also for the same material . Now when we are creating sTO for the material , then in PO the stock type is "Unrestricted" , the lot is not getting generated for the material . We have to manually change the stock type in STO to QI to generate lot
NOTE : we are creating STO by considering plants as customers and vendors .So migo is against outbound delivery .
Can anybody help ?

Dear SAP PM
If the receiving material's QM view is having Inspection type 08, after that if the material receives any stock from other material it will go to quality stock only as per std SAP.
Please check the below points
Active check box should be checked for 08 inspection type in insp setup of material master
Post to inspection stock should be checked
Check whether any other inspection types are assigned to 08 origin. If so check the preferred inspection type in material master.
Check whether the quality not active check box is checked for 309 movement type at SPRO > Quality Management > Quality Inspection > Inspection lot creation > Inspection for goods movements
Revert back in case of any queries
Regards

Post to inspection stock indicator not selected

Hi
We have a material with LEER material type (i.e. empties) with serial numbers. We don't want it to post in inspection stock when GR is performed. I have deselected indicator "Post to inspection stock" in inspection type setup in material master. User performs 103 Mov Type in MIGO screen and an inspection lot is created. We enter results using serial numbers and make UD successfully.
MM user performs Release GR block stock and stock is moved into un-restricted using Mov Type 105 irrespective of inspection lot status (coz Inspection Lot was not stock relevant)
The only problem is that UD is done successfully despite inspection lot stock tab which shows quantities to be posted and lots are shown in QVM2 - Inspection Lots with Stock.
We want that when post to inspection lot stock indicator is deselected for the material, its inspection lot quantities posting status should be closed at UD and should never be appeared on QVM2.

hi
i think you have to activate the QM functions for delivery using the QM info record,use T code QV51 and for your customer and sales organisation assing the material for which you want to use the QM and specify whether you want to do QM before or after delivery
in Standard SAP for inspection type 12 you will not find the Post to inspection tab button
regards
thyagarajan

Post to inspection stock in inspection lot origin 12

hello,
any body please help me. when i am using inspection type 12(delivery general). in that i am not getting post to inspection stock field. how i get that. because my senario is when i am doing delivery stock should go quality and then only deliverd. because products are batch sensitive product. but when i am using that inspection type inspection lot is creating but stock is not posting to quality. how can i overcome this issue.
thanks and regards
bhakta

hi
i think you have to activate the QM functions for delivery using the QM info record,use T code QV51 and for your customer and sales organisation assing the material for which you want to use the QM and specify whether you want to do QM before or after delivery
in Standard SAP for inspection type 12 you will not find the Post to inspection tab button
regards
thyagarajan

Stock not posted to Inspection stock

Hi,
1. The inspection type 04 - Goods receipt from production is maintained in material master.
2. The Inspection plan is maintained
But the stock is directly posted to Unrestricted stock. When I check Goods receipt tab in process order, the stock type is Unrestricted. How come here the stock type is Unrestricted.
Please clarify.
thanks and regards
Murugesan

Hy,
Have you mark or tick for Post to Insp. Stock for that Inspection type in QM view of Material Master.If not then tick that selection and do the GR again.
Regards
Dhaval

Inspected stock posting to multiple storage location without batch

Hi,
At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
Quick response will be appreciated.
Anandkumar KS

The scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use. You obviously aren't using the 553 movement type as that writes off the material. That could give you two lines to use for your scraping. I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today. If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
You can also change the displayed names of the stock posting lines. That's explained in the config file as well.
Craig

Stock posting in block stock after grn for source inspection

Hi All,
I have following scenario
I am doing source inspection at vendor site i have maintained control key 0005 in material master & necessary certificate with certificate check required at GRN & UD stage
i am creating a source inspection lot for a release po through t.code qi07 & then processing that lot before GRN
Now when i am doing GRN for same PO it is giving me the following message stage
<b>A category ZC01(user sp. category) inspected certificate is required</b>
Message no. QA312
Diagnosis
An inspected certificate must exist at the first goods receipt for a purchase order item.
Procedure
Check whether a suitable certificate exists for the purchase order and delivery, and create a certificate record with the status "Certificate checked and stored".
If there is no certificate or no suitable certificate, this does not comply with the requirements in the material master record. If there is no inspection lot for this goods movement, the system posts the quantity to blocked stock or does not post the goods receipt.
If you have created an inspection lot, the system marks the certificate check with the status "In lot". You must confirm the availability of an inspected certificate by the time you make the usage decision.
after doing the GRN stock is being posted to block stock
if i do not process the source inspection lot then the stock is posted to quality stock but this does fulfill the requirement of source inspection
plz suggest soultion
It's urgent
Regards
Ashutosh Shende
9860681314

Hello Ashutosh,
In the material master you have defined certificate type with the customizing setting indicator for 'Enhanced Certificate Processing' active.
If you set this indicator, extended certificate processing is active for
this certificate type. You can then manage the inbox for quality
certificates independent of the goods receipt.
The electronic inbox of certificates for the purchase order is only
possible if this indicator is set.
This means you have to create a certificate in QM (Transaction QC51),
before you can update your PO with cert. enclosed.
If you do not want the enhanced certificate processing you have change
the indicator into inactive.
Another problem known here is if you have activated the 05 Inspection type in the material master, that it is not activated in all plants relevant although QM in Procurement is set in all plants.
I hope that this resolves the described issue.
Regards,
Isabelle

Return posting to quality inspection stock

Hi QM Gurus!
How can i post from unrestricted to quality insp stock? I am trying to use movement type 322(quality insp to unrestricted-reversal) and an error message says "Change the inspection stock of material 1101 in QM only".
When i activated the inspection type 08 (stock transfer inspection), the movement type 322 works. However, when i do transfer posting from one storage location to another, an inspection lot is created.
So my problem is, how do i allow posting from unrestricted to quality insp stock and no inspection lots are created when i transfer the material from one storage location to another???
I would appreciate if anyone could help me.
Regards,
Heinrick Palad

hi heinrick
you can reverse the stock positing providing following prerequisite have been meet,
A usage decision has been made for the inspection lot.
The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting.
Reversing Stock Postings
Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
In the field for the purchase order, enter the purchase order number for the original goods receipt.
You can copy the purchase order number from the inspection lot.
Choose Enter to display the selection screen for the purchase order items.
Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
Save the goods receipt and exit the Materials Management component.
Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.
regards
thyagarajan

Inspection lot not generated after goods reciept?

Dear SAPIENTS,
Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
Regards,
Kaushal Rai

Hi Kaushal,
For Inspection lot from GR, 01 Inspection type is enough.
- Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
- Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
Regards,
Keerthi.

Post to Inspection Stock Problem

Dear Gurus,
What is the other ways for a material to be able to be posted in "QI stocks aside from MM02? I am referring to a production order when GR should be in QI stocks. I am using CO11N for production order GR not MIGO. Is there a setting in CO02 where I can set-up inorder for the stocks to be posted in "QI"?
Please advise.
Thanks and regards.
Ching

Ching
First of all , will you please tell us why you are looking for another option than MM02 for stock posting to QI.
The QM logic is as follows....
1 - We set the inspection set up in Material Master with inspection type 04, to create inspection lot upon release/confirmation of production order.
2 - We then process the inspection lot after carrying out the inspection to move the stock from quality to unrestricted.
If you do the settings in CO02, as suggested by others, you may not have the inspection lot created to process though the stock will be posted to inspection.
Can you be clear, on your requirement in detail
Regards
Mahesh

Backflush Semifinished product and stock post to quality inspection stock

Dear Experts,
Please advise is it possible for the below in SAP. How to do?
When backflush "Semifinished product", system automatically post to quality inspection stock. Then it is skip for 9 lots. The 11th lot again post to quality inspection stock.
1st backflush posting -> post to quality inspection stock
2nd until 10th backflush posting -> post to unrestricted stock (skip)
11th backflush posting -> post to quality inspection stock
Thanks.
Regards,
Wong

Dear Experts,
Let me further explain what I want.
Production people produce semifinished product, but quality inspection people not inspect all the product. For example they will inspect 1st and 11th batch of product only.
So I propose when backflush the semifinished product, system post the stock to quality inspection stock. Then production people know this batch of product need to be inspected and pass to quality inspection people. Once quality inspection people complete the inspection, they will release the material (UD) to unrestricted stock.
I have no idea on how to configure and maybe it is not possible in SAP. Please advise.
Question: Is it we should manually create inspection lot for each transaction (eg. backflush or material movement)?
Thanks in advance.
Regards,
Wong

QA32 Inspection Stock Posting

Hello
My requirement is to make rejection text mandatory when inspection stock is posted to blocked area in inspection stock tab of QA32 Tcode. so kindly let me know is any user exit or BADI Available
I Tried
This Badi QEVA_ALT_QTY_INPUT not triggering
QEVA0001 This is exit is triggerring but data is getting save after display error message.
with regards
Anand kumar . R

HI Anand,
Use SHD0 Tcode and create Transaction Variant.
Here you can make fields Mandatory/Display/Editable
[Transaction Variant Step by step |https://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Cheerz
Ram

Displaying inspection lot (not posted in inspection stock) as mrp element

Similar Messages

Maybe you are looking for