Displaying items in adobe form

Hello All,
I am new to adobe forms.
i need to display billing items, in the adobe form .
i have created interface, and imported this table. till here i am clear. but i dont klnow how to display
this information in layout.
i need to diaply heading and under that relevant data. i ahve total 100 row in billing items table.
please guide me how to acheive this.
P.S.: i ahve gone through forum, all of them are takling about, some dynamic display, and table inside table.....this kind of advanced stuff.
thanks a lot inadvance
Best Regards
Amarender Reddy B

Hi Amarender,
Try using a Two subform layout for displaying the tabular format. The design should be this way.
>Parent Subform (Flow Layout and Flow direction is Table and Allow Page break within contents checked)
>Column Header(use static Text)
>Child Subform(Flow Layout and Flow Direction is Table Row)
>Columns binding(user text field and bind it to the Value node attribute and Repeat subfom item checked)
This is how u display the data in Table format in PDF.
Hope this helps u
Regards,
Poojith M V

Similar Messages

Bom item in adobe form will display inside the main item

hi gurus,
Currently i am displaying a print adobe form of order confirmation (va02) . but requirement is like i need to display Bills of Material item bit inside the main item level . for ex : there are total 50 line items in a sales order and for item no 20 , 30 and 40 are the Bom item in that sales order only.now rather to print all the items in a same level i need 30 and 40 will display bit inside in the form.....currently i am using table row in form......
Edited by: Manoj Kumar on Jan 8, 2008 1:21 PM

hi gurus,
Currently i am displaying a print adobe form of order confirmation (va02) . but requirement is like i need to display Bills of Material item bit inside the main item level . for ex : there are total 50 line items in a sales order and for item no 20 , 30 and 40 are the Bom item in that sales order only.now rather to print all the items in a same level i need 30 and 40 will display bit inside in the form.....currently i am using table row in form......
Edited by: Manoj Kumar on Jan 8, 2008 1:21 PM

How to pass multiple items in Adobe forms to a Webservice

Hello, all.
I'm trying to create Interactive Form to create a sales order in R/3.
Please somebody tell me how to pass the multiple line item data to the Webservice.
For example, the Webservice I'm using was generated from BAPI_SALESORDER_CREATEFORMDAT2.
The BAPI has tables for item data in sales order.
However, when I create the form with table for item data, the only last line of the table is passed to the Webservice.
How can I create Adobe forms to pass multiple line item to the Webservice.

Hi,
I have worked on the same application for the creation sales order and has used the same BAPI.
You should first extract the data from the table node through the method "get_static_attributes_table" and take all the result into a table of type same as element of that particular node.
Now pass the data from this table into the internal table of type as mentioned in the BAPI using work area.
And pass this table to BAPI.
This will work .
Regards,
Shruti

Incomplete text displayed in interactive ADOBE form

Hi Guys,
I have an interactive adobe form where a drop down will display "EQUIPMENT NO" W.R.T to the selection screen i/p
uporn selection of the "equipment number" the "EQUIPMENT NAME"field automatically populates.
I used to get an error message "Entry is too long",
got rid of it by setting the value of TYPE property of attribue to "MAXLENGTH" , uporn doing this the drop down and the discription text is displaying only last 3 char of the values.
I tried increasing the size/characters of the fields in the table in the form but was of no use. Any inputs will be Appreciated

Yes I have checked all the subforms Flowed. Text field is working good in Preview Pdf Option of NWDS.
But when I generate the pdf on server, when TextField flows to next page, on next page it repeats from first line.

How to validate a text item/display item in Oracle forms 9i?

Hello Everyone,
I have a form in which we have to type in a product_id as shown below in the screenshot. And when we type in, it has to get validated.
If it is valid then ok, else display a message saying not valid.
How do we achieve it on a text box/diaply item in the form shown below.
Any kind of help would be really appreciated.
Thanks in advance,
Vishal

Just create a when-validate-item trigger for that text item and write the code inside to validate it.
Hope it helps.
Navnit

Text Field value display twice in Adobe Form.

Hi Experts,
I want to display a text field value twice in a ADOBE FORM but it only display at first occurance of the text field.
Please suggest me possible solution.
Regards,
Abdul

Why don't you have two different text fields in the interface and bind them separately at the two different places in the form. In the driver program you can control the value being passed to be same for both the fields.
Regards
Ranganath

Dynamic display fields in Adobe Form

Hi all,
I am trying to design a Adobe non-interactive form.
But my requirement is If Field = X then display table1.
If Field = then do not display table 1 in output of Adobe form.
Field & table both are coming from SE38 code.
Please guide me if it is possible or not with a single adobe form.
Other option I have I can design 2 different form one with table & other with no table.
Please guide me if it is possible with one Adobe form or not.
Regards

Hi Umesh,
This is possible using single Adobe form only. Pass this field into context.
And in form, write the script on Form:Ready event of body page:
if ( $.FIELD eq "X" ) then
$.Table1.presence = "hidden"
endif
Hope this helps,
Amit

Space is coming in displaying address in adobe forms

Hi Experts,
I am displaying address by fetching it from ADRC table. printing individual fields without using address node concept.
Here the issue is...
If there is any address field is vacant then that field is coming with space. I have to suppress this space and display the next field here.
These address fields are in subform and it is 'flowed' and 'top to bottom' in nature.
One address is displaying in Master pages and the other one is in Body pages. I have this space issue in both.
Javascript code is written correctly but stilll issue persist.
Please suggest me.....
Thanks in advance.
Regards,
Dileep.

HI friend,
I too faced the same issue in Adobe during my project.
But you can solve this easily.
Just create an internal table and fill the fields of the address in the internal table. Ie each address line will be as a record in the internal table.
After fetching all the address lines now you can see the internal table is filled with one employees or 1 items address details.
Now perform operation on the internal table.
DELETE ITAB WHERE FIELD1 EQ SPACE.
This will delete all the spaces now loop that internal table and print the address details.
This is how i solved my issue, If you find difficulties in achieving it please revert back to me i will help you.
Thanks,
Sri Hari

Display items on a form

Dear composite experts,
Within GP I have three blocks:
1) Enter Purchase Order ID
2) Get Purchase Order details
3) Display Purchase Order details
For the third step I created a Web Dynpro Form as CO. On this form I have placed some header fields and a table to display the items. The header fields are OK, but I only get the first item displayed in my item table.
Who can help me out with getting the other items in my table as well?
I have tried looking into the tutorials and this forum - but no luck so far
Kind regards
Twan van den Broek
PS. When I test the CO from block 2, I get the complete purchase order back, both header details and items.

Hi Dipankar
I think I did not make my problem / situation clear.
With the aid of this tutorial <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5e9ca25b-0e01-0010-bbaa-f3b963e89edd">87 How to Consume an SAP Enterprise Service using Visual Composer and the Composite Application Framework</a> I imported an enterprise service (ECC_PURCHASEORDER002QR) in the NetWeaver Developer Studio to create an Composite Application Service, I added some logic to check the amount and deployed it to the portal.
Now I want to model the process in the GP design time as described in my first post. Doing this I hoped that I could reuse GP building blocks to generate the UI for me. Except for the multiple item lines, this works.
I realize that this is different than described in the tutorial, there the VC is used as a tool to generate the UI.
Issues remains that with - as far as I see right now - the existing GP templates it is not possible to have a table in your UI.
Kind regards
Twan

How can I change TEXT ITEM to DISPLAY ITEM in my form.....

Hello;
There are 2 users in my form,when fırst one is connect to my form,I want to change "the Text item" to Display ıtem..

Better try the Forms forum:
Forms

UI Attributes - RFC error when displaying PCR with Adobe forms

Hello All,
I am receiving an UI Attributes/RFC error when I display a PCR that was created wth Life Cycle Designer. I copied it from a delivered SAP form. I am using the QISR1 Badi to process the form. I have three other forms that are working correctly.
If anyone can provide some direction into resolving this, it would be greatly appreciated.
Thanks,
Mike

Hello All,
I was able to resolve this issue by setting a UI Attributes variable.
Thanks

Problems Displaying data from RFC on Adobe Forms

Hi,
I have some Problems with creating an Adobe Form and hope, someone can help me or give me some hinds to some tutorials, which can help me.
I'm developing an webdynpro-application which get data from a R/3 via RFC-Call.
Context-Binding and so on is done and works. I created also an interactive form and can display some datas on it.
Here my questions:
I have an field 'unit' which shoulb be displayed on several positions onto the form. My problem is, i can display it only once. If i copy the field, there is no output in it. What can i do, to solve the problem?
From the RFC i get a table with several rows of data, i want to display on the form.
With drag&drop i can place the fields onto the form but they are displayed only once. I want one line for every row from the table.
What do i have to do? Are there tutorials which show the steps?
When I am not using a form, i can display the data from RFC in a table with no problems (i create a table ui and choose create binding from context menue). Are the nescessary steps for displaying the data on an interactive form the same.
I read something about creating a dynamic form design. Do i have to create it? What are the steps i have to do.
Many questions, but i hope that someone can give me some helpful hints.
Many thanks
Mathias Lange

Hi Mathias,
If I caught you correctly, you want to display data in Adobe forms in form of tabel, right?
So, follow the steps:
1. Insert one sub form on your adobe form.
2. Set its type as "flow content" in object->subform property.
3. Set flow direction as "Table".
4. Insert another subform inside this subform.
5. set its type as "flow content" and flow direction as "Table row".
6. Now, choose binding tab, and there check "repeat subform for each Data item check box" and specify min. count for your rows.
7. Now, insert your column fields inside this sub form once.
8. Format its look and feel as you want.
When you run this application, it will show you multiple data as table on Adobe form.
Regards,
Bhavik

Add Button to Display Adobe Form through SPRO

Hello All,
I am trying to add a button to display Online Interactive Adobe Form through SPRO but its not working.
So please suggest me how can i add a button for it ASAP.
Thanks and Regards:
Anugrah

method ONACTIONCLICK .
wd_this->fire_o1_plg(
endmethod.

Need to display multiple lines of output in adobe form..

hi,
i have an internal table data which needs to be displayed on my adobe form as multiple lines . how do i design my form in SFP ??
actually i alerady have a form whose layout is life one header line and one detail line..i dont see anywhere any property that i can set to say i want to repeat that detail line multiple times. so whats the way to do this ?
thks

Hi Jojit,
That was a bit helpful. But what i am looking for is that i will be having a table inserted in the layout with 2 rows. One in which i will type the header text and the other row will have the text elements in each of the column to hold the field values. So my design is predefined in the form. The example u show is a blank form to which we write rows of data. But i need some additions to it like drawing a table around it with a header line.
can we design that thru the driver program ?? or is there any other way ?
thks

Adobe form displaying data of previous selected records

Dear All,
I have created a wd component consisting of 2 views.
In the first view i am displaying an ALV. When i select a record and click on the alv button, the second view
gets called which contains an Adobe Form showing the data.
The problem i am facing is that the record which gets displayed in the adobe form is the one previous selected record and not the current record which i select.
Kindly give your valuable suggestions .
Regards,
Niti

Hi ,
Adobe form is just an external media in your case , it has nothing to do with your data.
Check what data is getting passed to adobe form via debuging .
check if your getting the selected element .
You can also post your code here if possible.
Regards
Kuldeep

Displaying items in adobe form

Similar Messages

Maybe you are looking for