Displaying labels with a different color in a form

hello all,
how to display labels in a form in different color?
the question may be simple to many. as i am new to apex.

Hello,
Please check if the following can help you - App. Express -- Change font size in the item label. .
Regards,
Arie.

Similar Messages

How to underline with a different color than red (in Preview, with Mountain Lion)

Hi,
I'm using Preview to study and I would like to figure out how to underline with a different color please...
Also, Is there a better app to read PDF document and highlight/annote/underline... to study...
Thanks!

In Adobe Acrobat Reader, you can control the color of the underline and the highlight from the Annotations panel. You would bring this into view from the View > Comment > Annotations menu hierarchy. The underline tool by default, has a green underline. You can change the color (and opacity) by right-clicking the green underlined ‘T’ and choose “Tool Default Properties.”
This may have answered your second question if you find it easier to perform your markup with it.

PPR Report ,How to display Label with TOTAl

Hi,
How Can i display PPR Report ,How to display Label with TOTAl like
[http://apex.oracle.com/pls/apex/f?p=267:30:]
Thanks
Edited by: 805629 on Jan 6, 2011 3:34 AM

Hi,
For PPR Report:
Select "Yes" in "Enable Partial Page Refresh" item of "Layout and Pagination" region in Report Attributes of that report.
For display Label with TOTAL:
Use "Break Formatting" region in Report Attributes of that report.
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

My front screen of my iphone 4 is cracked and if I bring it in to be fixed can I replace the front and back glass with a different color?

I recently dropped my iphone 4 and cracked the front screen if I brought it in to be fixed can I get both the front and back glass replaced with a different color?

No. They will not. The replacement will be identical to the old one. You always have the option of buying a brand new phone for the full retail price.

Is Aperture displaying images with a modified color temp. or gamma?

I am brand new to Aperture and after importing some scans from black and white negatives, I notice that the same images when viewed in Preview or Photoshop appear brighter and perhaps cooler (but it is hard to tell with black and white images).
I am just trying to discover why Aperture displays images a little differently than other applications.
Thanks in advance.
D

the same images when viewed in Preview or Photoshop
Comparison across applications is meaningful if and only if the image has the selfsame source ICC colour space profile. Begin by checking that the image has an embedded source ICC colour space profile. There are lots of ways, either run one the ColorSync AppleScript that extracts the embedded profile, or open the image in Apple Preview and check Tools > Get Info > Summary: ColorSync Profile, or open the image in the Apple ColorSync Utility, or open the image in Adobe Photoshop (which will describe an image without an embedded source ICC colour space profile as 'Untagged RGB', 'Untagged Gray' or 'Untagged CMYK'). If instead you open an image without an embedded source ICC colour space profile in a series of side-by-side application windows, these applications will assign an assumed source ICC colour space profile and the sources they assign may not be the same. In order to configure a conversion you have to have a source and a destination: no source, no colour managed conversion, so a source has sometimes to be assigned.
Hope this helps,
Henrik

Apex 3.0 Q: "Optional Label with Help" default when creating new form?

When I create a new application, usually one of the first things I do is set the default item label to "Optional", so I don't have the annoying popup help link.
Now, when you create a new Form region, based on a table, for all the items the label is set to "Optional label with help". Am I right in hoping this is something that was overlooked when developing Apex, and that it will be fixed in version 3.0, so that it sets the items to the default label as set in the Shared Components?
And is there a way to change the labels for a lot of items at the same time, other than changing the theme templates?

AFAIK, label help in default manner is based on column coments of a table.
Later there is now way to easy reedit these values but manually...

ADF FACES: af:messages does'nt display label with resource bundles

Hi,
There is a problem with the af:messages component and error messages containing labels (such as Value is Required error message for required fields).
If I have an af:inputText with it's label property refering to a resource bundle loaded using the f:loadBundle action, when the Value is Required message is displayed, I get "" for the field name.
If I replace the label property with a constant value or with an expression refering to a managed bean property, then the label is properly displayed in the error message.
I suspect this has to do as to when the action of getting the label is done. Maybe the bundle is not availlable at that time. Anyway, this is a bummer as it mean that we cannot use the f:loadBundle action to load resource bundles.
This happen with AE11. I have not tested this with EA12.

Thank's!
I'll try EA12 when I have the time.
I also found that in our JSPs, we've put the f:loadBundle ouside of the f:view tag. I'll fix that in our codebase.
While researching a fix, I found out that using a managed bean (which implement Map interface) to load the bundle based on the name refered in the expression language is a lot more intuitive and allow for an easier management of the different resource bundle than the f:loadBundle tag.
Basically, our EL expression are now #{bundles.bundleName.property} we replace any "_" in bundleName with "." and then lookup this name as a ResourceBundle with the locale of the view. We keep the managed bean in the request scope it remember each bundle it loaded.
We could have done it with a custom VariableResolver. Maybe a future release of the JSF spec could provide a standard variable name that would implement the same behaviour. This way, one does not have to load each bundles before hand and only the bundles accessed by the JSP will be loaded.

How to get a .tif image with n different colors?

Hi..i want to know how can i get a .tif image colored by some colors. I want to do something like this:
if(tifImage.pixel < 0.1) {
tifImage.pixel = yellow;
else if( 0.1 <= tifImage.pixel && tifImage.pixel <0.5){
tifImage.pixel = red;
up to n colors.
I prove the next code, but it is not getting the colors i want.
public void generateImage(BufferedImage bi,double alto,double medio,String output){
          int width = bi.getWidth(); // Dimensions of the image
          int height = bi.getHeight();
          // Some constant colors (as arrays of integers).
          int[] red = {255, 0, 0};
          int[] green = { 0,255, 0};
          //int[] blue = { 0, 0,255};
          int[] yellow = {255,255, 0};
          //int[] background = { 85, 85, 85};
          int[] background = { 255, 255, 255};
          // The original image data will be stored on this array.
          int[][][] imageData = new int[width][height][3];
          // We'll fill the array with a test pattern bars thingie.
          double[] pixelArray=null;
          for(int w=0;w<width;w++)
               for(int h=0;h<height;h++)
                    if(bi.getRaster().getPixel(w,h,pixelArray)[0]>=9000){
                         //lo dejo blanco
                         imageData[w][h] = background;
                    else if(bi.getRaster().getPixel(w,h,pixelArray)[0]>=alto){
                         //lo dejo rojo
                         imageData[w][h] = red;
                    else if(bi.getRaster().getPixel(w,h,pixelArray)[0]>=medio){
                         //lo dejo amarillo
                         imageData[w][h] = yellow;
                    else{
                         //lo dejo verde
                         imageData[w][h] = green;
          // Now we have a color image in a three-dimensional array, where the
          // third dimension corresponds to the RGB components.
          // Convert the color image to a single array. First we allocate the
          // array.
          // Note that this array will have the pixel values composed on it, i.e.
          // each R,G and B components will yield a single int value.
          byte[] imageDataSingleArray = new byte[width*height*3];
          int count = 0;
          // It is important to have the height/width order here !
          for(int h=0;h<height;h++)
               for(int w=0;w<width;w++)
                    // Rearrange the data in a single array. Note we revert RGB, I still don't
                    // know why.
                    imageDataSingleArray[count+0] = (byte)imageData[w][h][2];
                    imageDataSingleArray[count+1] = (byte)imageData[w][h][1];
                    imageDataSingleArray[count+2] = (byte)imageData[w][h][0];
                    count += 3;
          // Create a Data Buffer from the values on the single image array.
          DataBufferByte dbuffer = new DataBufferByte(imageDataSingleArray,width*height*3);
          // Create an pixel interleaved data sample model.
          SampleModel sampleModel =
               RasterFactory.
               createPixelInterleavedSampleModel(DataBuffer.TYPE_BYTE,
                         width,height,3);
          // Create a compatible ColorModel.
          ColorModel colorModel = PlanarImage.createColorModel(sampleModel);
          // Create a WritableRaster.
          WritableRaster raster = RasterFactory.createWritableRaster(sampleModel,dbuffer,new Point(0,0));
          // Create a TiledImage using the SampleModel.
          TiledImage tiledImage = new TiledImage(0,0,width,height,0,0,sampleModel,colorModel);
          // Set the data of the tiled image to be the raster.
          tiledImage.setData(raster);
          // Save the image on a file.
          JAI.create("filestore",tiledImage,output,"TIFF");
Thanks

I tried that. When I open one image and set the exposure, then go to open the second image, nothing happens. I then saved one image as a psd file, then it would let me open the raw file a second time. When I had both open on the same screen and dragged the layer from one into another image, the layer size ended up being different than the other file. It was shifted down and to the left. I need these images to be pixel locked, and the user experience I went through did not allow me to do this.
I also do not see a way to copy/paste layers between files.

Assign each half of a glyph (ASCII character) with a different color?

Okay, this might be an odd one.
I am using a glyph - Calibri number inside a filled black circle (it doesn't actually matter what glyph) and I want to color the circle part only (leave the background - number, white) with 1/2 red and the other 1/2 green. Are there any tricks in InDesign that would allow this?
Alternatively, I can convert the glyph to curves in Illustrator and fill the colors... then insert back into InDesign.
But... just curious about a way to do this inside InDesign??

BTW,
I was over at MyFonts.com purchasing some fonts for a job and ran across one of Ray Larabie's (Typodermic.com) fonts that uses OTF features to move characters typed in a given sequence. I mention this because it too is a solution and can have characters/numbers up 6 places. I think it would be relatively easy to GREP the styles needed for each of the parts and this is a means of keeping the numbers in a true circle.
I don't know which means would be easier. I suppose the paragraph and character styles I created for my example above is the easiest as long as one doesn't need to go beyond the number 20, which is as high as those characters go in Calibri.
The screen shots are from within the application I was using at the time and show its story editor. First screen shot is the characters used to produce each number, which in turn is the second screen shot when I turn on the formatting in the story editor. Because the story editor swaps out the paper color (white) for black for viewability, the last screen shot is on the page.

What Rendering intent is used when exporting with a different color space?

Hi,
I would be ever so grateful if any one can tell me what rendering intent is used by LR4 when exporting using a custom colour space as there is not an option as there is with the print module.
Thanks.
Message title was edited by: Brett N

Jeff Schewe wrote:
Bob_Peters wrote:
The rendering intent in the Export dialog is Perceptual.
Actually, an RGB color space to RGB colorspace is always only Relative Colorimetric...and adding Perceptual would only work with certain V4 ICC color spaces (you can find perceptual V4 color spaces for sRGB and ProPhoto I think but I'm not sure they would work in Lightroom anyway).
When using an RGB print output profile you can select either Perceptual or Relative and have the intents actually applied.
True.
The case of interest to me is when I have to print a lot of files using a third-party profile and maintain the original filename so it appears on the back. That is why I made the request more than a year ago.
The problem with the Print module is that it clobbers the filename but does allow 2 choices for the rendering intent. Having to deal with weird filenames creates a mess when matching, say, 50 prints with custom notecards.

My paint bucket is filling with a different color than I selected

Please help! All of a sudden my paint bucket is filling with odd colors......tried opening and closing program but it doesn't work. Thanks in advance.....I have Adobe Photoshop CS.

I'd check the blend mode and opacity settings set in the tool options bar with the paint bucket tool selected.
Most likely you want it set to Normal and 100%
Or right click on the Paint Bucket Tool icon in the tool options bar and choose Reset Tool.

Is it possible to have the front panel on the iPad 2 replaced with a different color?

I have a WiFi-3G verizon 64GB BLACK iPad 2, when I bought it, black looked the best at the time. but now, it seems that white looks ALOT better and actually makes the screen look bigger . I was wondering if it was possible that if the front glass (not the LCD) can be replaced with a white one. As far as i can see, all of the connections and clips SHOULD clip into place just like the black panel. there should be no problem. the only problem i could see is that the apple store will refuse to install it because of some bullsh** reason. If that happens, i will buy the panel, then go to iFixit or something like that and see if they will take my money. So if anyone can shed some light on my situation, that would be GREAT. THANKS

my step mother got an ipad against my advice to wait for the new ones and she got a white one, and seeing how clean, pure, open and free the white one seemed compared to my black one, which (athough i polish habitually) look sad, dark, grimy and "trapped", i wanted to get the panel swapped. i thought i could maybe pull off an "oh crap i 'accidentaly' dropped my ipad and the screen broke" but that seemed utterly useless as they would just replace it with a black one.

Displaying subtotals with a different recordset

I have a table that is being populated with a while/next. The table is grouped on SBU. I need to be able to insert a subtotal for each SBU. How can I do this with a separate while/next? Is there a better way?
Thanks
Ken

I have no idea what an SBU is, but here is what you need to do(PSUDO CODE)
Record prevResults = null ;
int total = 0;
while( haveMoreResults() )
    Record currentResults = next();
    if( prevResults != null && !prevResults.getSBU().equals( currentResults.getSBU() )
          buildSubTotalRow(total);
          total = 0;
    prevResults = currentResults;
    total += currentResults.getDataToSubTotal();
}

How to blink the appliaction titlebar with different color ?

Hi guys
I stuck in a problem . actually i want to blink the titlebar color with 2 different color while the window is in minimize state.
just like skype when the message comes the titlebar blinks with two different colors if it is in minimize state.
Please guide me.
Thanks and regards
Mohit

Hi Mohit,
You could try using the notifyUser() method for your native window. See http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/display/NativeWin dow.html#notifyUser() for more information.
Hope that helps.
Regards,
Sanika

XY Graph overlay multi plot with different colors

Hi,
I want to do a cyclic X-Y plot in a for loop and plot the graph for each cycle in different colors.
I want a plot like XYgraph2 but with different colors and probably even without that tracing line. How do i modify my diagram?
Thank you for your time and efforts.
SUCHIT
Suchit Shah
Graduate Student
Electrical & Computer Engineering,
Northeastern University,
BOSTON
MA 02115
Certified LabVIEW Associate Developer
Solved!
Go to Solution.
Attachments:
block dia.JPG ‏45 KB
front dia.JPG ‏122 KB

Hi all! This is my first post
My name is Francesco and I'm programming a keithley for measure some FET
using labview 8.6. I plot my output data on a XY graph but I have several curves,
one for each value of Vgs. Looking in your forum I've found the code
MultiplePlots.vi (21 kb) posted by Darin.K about a month ago that use Multiple
plots and it is perfect for my goal because with this I can plot every curve with a
different color. The only problem is that I like to plot my data in real time.
The code, however, use a Loop with N=50, accumulates the values on the edge
and plot at the end of the Loop the entire line.
My question is if someone can explain me how to modify the code to plot the line
point by point, so in real time and not at the end o the loop because I need to see
the current values during the measurement and not only at the end.
I think that I need to move the XYgraph inside the loop. I try but without lucky.
Can anyone help me?
thanks and sorry for my very bad english.
Francesco

Displaying labels with a different color in a form

Similar Messages

Maybe you are looking for