Displaying login (101) screen as first screen when RUN APPLICATION clicked

Hi, I'm new to APEX, and have inherited an application that although it has a login screen defined (page 101), when the application is run, it displays page 1, and bypasses the login screen. The Home URL is set to page 1, but I have looked at another application that does display the login screen, and that also has the Home URL set to page 1. Does anyone know how to ensure that the login page is displayed when you run the appliction ? thanks

In your app, go to Shared Components/Security/Authentication/[Select your authentication scheme] and have a look at the "Session Not Valid Page" - this should be 101
Andy

Similar Messages

  • 2012 macbook pro retina display artifacts on screen when using onboard video

    2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
    About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
    On top of that issue I also have had the ghosting issue.
    Anyone else have this problem?

    artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
    There are a few retina owners who have faulty gpus.

  • How to display the output screen when I use bdc.

    hey expert,
    I want to display the output screen when i use bdc without using mode 'A'.
    thank you.

    Hi,
    You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
    check this sample code....
    I had a program if you execute below program it automatically creates a new zprogram.
    REPORT  zprogram_create_recording.
    PARAMETER:
      p_prog    TYPE sy-repid OBLIGATORY,
      p_shtxt TYPE repti OBLIGATORY,
      p_pack  TYPE devclass DEFAULT '$tmp'.
    DATA:
      t_bdcdata LIKE
       STANDARD TABLE
             OF bdcdata.
    DATA:
      wa_bdcdata LIKE LINE OF t_bdcdata.
    REFRESH t_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-program    =  'SAPLWBABAP'.
    wa_bdcdata-dynpro     =  '0100'.
    wa_bdcdata-dynbegin   =  'X'.
    wa_bdcdata-fnam       =  'RS38M-PROGRAMM'.
    wa_bdcdata-fval       =  p_prog.
    APPEND wa_bdcdata TO t_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam       =  'BDC_OKCODE'.
    wa_bdcdata-fval       =  'NEW'.
    APPEND wa_bdcdata TO t_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-program    =  'SAPLSEDTATTR'.
    wa_bdcdata-dynpro     =  '0200'.
    wa_bdcdata-dynbegin   =  'X'.
    wa_bdcdata-fnam       =  'RS38M-REPTI'.
    wa_bdcdata-fval       =  p_shtxt.
    APPEND wa_bdcdata TO t_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam       =  'TRDIR-SUBC'.
    wa_bdcdata-fval       =  '1'.
    APPEND wa_bdcdata TO t_bdcdata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam       =  'BDC_OKCODE'.
    wa_bdcdata-fval       =  'CONT'.
    APPEND wa_bdcdata TO t_bdcdata.
    IF p_pack EQ '$TMP'.
    *local object
      CLEAR wa_bdcdata.
      wa_bdcdata-program    =  'SAPLSTRD'.
      wa_bdcdata-dynpro     =  '0100'.
      wa_bdcdata-dynbegin   =  'X'.
      wa_bdcdata-fnam       =  'KO007-L_DEVCLASS'.
      wa_bdcdata-fval       =  ' '.
      APPEND wa_bdcdata TO t_bdcdata.
      CLEAR wa_bdcdata.
      wa_bdcdata-fnam       =  'BDC_OKCODE'.
      wa_bdcdata-fval       =  'TEMP'.
      APPEND wa_bdcdata TO t_bdcdata.
    ELSE.
    *package assignment with request
      CLEAR wa_bdcdata.
      wa_bdcdata-program    =  'SAPLSTRD'.
      wa_bdcdata-dynpro     =  '0100'.
      wa_bdcdata-dynbegin   =  'X'.
      wa_bdcdata-fnam       =  'KO007-L_DEVCLASS'.
      wa_bdcdata-fval       =  p_pack.
      APPEND wa_bdcdata TO t_bdcdata.
      CLEAR wa_bdcdata.
      wa_bdcdata-fnam       =  'BDC_OKCODE'.
      wa_bdcdata-fval       =  'ADD'.
      APPEND wa_bdcdata TO t_bdcdata.
      CLEAR wa_bdcdata.
      wa_bdcdata-program    =  'SAPLSTRD'.
      wa_bdcdata-dynpro     =  '0300'.
      wa_bdcdata-dynbegin   =  'X'.
      wa_bdcdata-fnam       =  'KO008-TRKORR'.
      wa_bdcdata-fval       =  ' '.
      APPEND wa_bdcdata TO t_bdcdata.
      CLEAR wa_bdcdata.
      wa_bdcdata-fnam       =  'KO008-AS4TEXT'.
      wa_bdcdata-fval       =  ' '.
      APPEND wa_bdcdata TO t_bdcdata.
      CLEAR wa_bdcdata.
      wa_bdcdata-fnam       =  'BDC_OKCODE'.
      wa_bdcdata-fval       =  'LOCK'.
      APPEND wa_bdcdata TO t_bdcdata.
    ENDIF.                                 " IF P_PACK EQ '$TMP'
    CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
    Hope this would help you..
    Regards
    Narin Nandivada

  • My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

    My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
    Will not show up in safe mode, will not show when started from Windows 7 DVD.
    I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
    Can see the PC volume from Mac side with files.
    I've looked at all the online solutions so far and have tried most of them without success. Please help!
    Specs:
    2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP52.008E.B05
      SMC Version (system):          1.42f4
      Serial Number (system):          7302300GANE
      Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
      Sudden Motion Sensor:
      State:          Enabled

    EDIT: RESOLVED
    For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
    Specifically, the posts by Dunsany and valkyr did the trick.  I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally.  I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
    Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again.  I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time.  Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black.  I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
    Hope this helps someone else!

  • Is there a way to make iPhone speak what is displayed on the screen, with a simple click?

    is there a way to make iPhone speak what is displayed on the screen, with a simple click? Instead of going through the Accessibility and VoiceOver feature. This will be very useful if I am driving, or tired of reading from the screen, or watching other stuff ... thanks

    No.
    What is available via Accessibility settings is it.

  • How do I stop 'recents' appearing on my screen when I double click?

    A New IO8 feature has appeared on my email screen when I double click, a list of " recent" contacts, allegedly, from my iPhone. I do not want these to appear on my iPad. I have switched off notifications from i message but they still appear. Note this of course happens when the iPad is functionning normally which is rarely now as it is either frozen, or just thinking, or not responding at all....all after the upgrade to IO 8.

    Just found the answer: settings, mail , contact switcher, off.

  • Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

    Hi,
    starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
    a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
    We figured out a workaround though: The applications run fine when launching from a FQDN share (like
    \\share.domain.Company.com) and only cause problems when running from
    \\share directly. They have worked fine for years without FQDN though.
    Any ideas?
    Error Details (the Kind of error differs greatly):
    # 1 #
    Log Name: Application
    Source: Application Error
    Date: ...
    Event ID: 1005
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: vmDEV
    Description:
    Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
    because of this error.
    Program: XYZ
    File:
    The error value is listed in the Additional Data section.
    User Action
    1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
    2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
    3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
    4. If the problem persists, restore the file from a backup copy.
    5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
    Additional data
    Error value: C000020C [ also seen with code C00000C4]
    #2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
    Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x00026549
    ID des fehlerhaften Prozesses: 0x13ac
    Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
    Pfad der fehlerhaften Anwendung: \\share\application.exe
    Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    Anwendung: XYZ.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
    Stapel:
    # 3 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
       bei System.Windows.Forms.Control.NotifyEnter()
       bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    # 4 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.IO.UnmanagedMemoryStream.ReadByte()
       bei System.IO.BinaryReader.ReadByte()
       bei System.IO.BinaryReader.Read7BitEncodedInt()
       bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
       bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
       bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
    # 5 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.Reflection.RuntimeParameterInfo.get_Name()
       bei System.Diagnostics.StackTrace.ToString(TraceFormat)
       bei System.Environment.GetStackTrace(System.Exception, Boolean)
       bei System.Exception.GetStackTrace(Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString()
    # 6 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
    Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
    Ausnahmecode: 0xe0434352
    Fehleroffset: 0x00012f71
    ID des fehlerhaften Prozesses: 0xa68
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
    Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
    Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    # 7 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
    Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x0006db27
    ID des fehlerhaften Prozesses: 0x18dc
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
    Pfad der fehlerhaften Anwendung: \\share\xyz.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
    Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

    Hi,
    >>The applications run fine when launching from a FQDN share
    It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
    the share correctly.
    If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Error when run Application  Help me please

    Message Error when run Application A_Anexo_7:
    java.lang.NoClassDefFoundError: etica.Anexo_7
         void etica.A_Anexo_7.<init>()
              A_Anexo_7.java:13
         void etica.A_Anexo_7.main(java.lang.String[])
              A_Anexo_7.java:46

    you need to provides more info
    basically, it's saying that it cannot find the class specified.
    You need to include the class in your classpath.

  • Following error occurring when running application in wireless tool kit

    Hi
    Following error occurring when running application in wireless tool kit
    java/lang/ClassFormatError: Bad version information.
    can any suggest y ?

    Hi,
    I am also facing the same problem......................
    java/lang/ClassFormatError: Bad version information
    The error occurs when I try to simulate the mobile device using wireless tool kit. Does it have anything to do with the antivirus/firewall running on my system?
    Did Ram get a solution to his problem? Can anybody please help?
    Many Thanks
    Merin
    HI
    Sorry i could not find any related information there
    the version of wireless toolkit i am using is 2.1
    well in release notes its given that it also
    supports cldc1.0 and midp1.0
    presently i am using cldc1.0.4 and midp1.0.3
    versions
    is there any version compatability error
    please suggest me its quite urgent

  • Display the Welcome screen when Photoshop CC starts up?

    I have researched and found lots of incidences where people want to keep the Welcome screen from displaying but I am want it to display and it will not.
    The checkbox under Edit>Preferences>General that says "Do Not Show Welcome Screen on Launch" is unchecked. I have tried checking that box saving, then unchecking saving again and restarting Photoshop. I have tried uninstalling Photoshop twice, once saving my preferences, the second time discarding my preferences and re-installing. Still no Welcome screen at launch. I have read that there is an option under Help>Welcome... to reopen the Welcome screen. I do not see that option and believe that is on the Mac only.
    By the way the Welcome screen opens/works perfectly in Illustrator CC 2014.
    I am running a Windows 7 PC with the latest version of Photoshop CC 2014.
    Anyone have any ideas?
    Thanks!

    I believe you have an installation problem.  Others have had problems  with the Welcome Screen and I had a problem after the 15.2.2 update.  Others were not able to Play the video tutorials from the welcome window.  Photoshop seems to use CEPHtmlEngine.exe to display the Welcome screen.  The CC 2014.2.2 update installed on my machine without a problem.  CC 2014 worked and I had turned off the welcome screen.  However I did not have the new Photoshop CC 2014 preference Do not show Welcome Screen on launch and when I tried to use menu Help>Welcome I received a popup error stating Photoshop could not start the plug-in because it was not signed.  The way I was able to fix this problem was to download the direct CC 2014 installer and install CC 2014 on top of the CC 2014 currently insall.  CC 2014 installed and was installed activated and after I used menu Help>Update  to get CC 2014 up to CC 2014.2.2 all worked my Add-ons and preferences were still there.  However if I start CC 2014 and immediately try to open the Welcome screen I will get the pop-up your getting Welcome Dialog not installed. But when I click OK and try menu Help>Welcome a second time it works.  The new Preference Do not show Welcome Scree on launch is there and I can set it there or from the welcome screen option.

  • 9iAS default databse login screen when run form in browser

    Gurus!
    If u remember me! last time i have asked u what should
    i do to invoke my own .html file while typing the ip
    of my oracle application server machine, u gave me a
    solu., that WORKS! thank u very much for that! now the
    prob. is that when i run my forms application through
    that .html form(which is infact the tester form to
    test that if form server is successfully installed or
    not, i am using that form with litle modifications i.e
    instead of running the test.fmx i gave it the name of
    my own form.)Every thing is installed successfully but
    when invoked my .fmx form through index.html file it
    displays the login form of oracle which appear when u
    not supply the user/password@db info. but i have given
    these info. when calling my .fmx file. whats the
    prob.?
    Kindly help in this frustrating situation again ASAP!
    Very thankfull to u!

    i got it
    just make report out of SSO by the steps
    If you don't want to use Single Sign-On:
    Edit $ORACLE_HOME\reports\conf\rwservlet.properties
    Change #SINGLESIGNON=YES to SINGLESIGNON=NO
    Log in to the Enterprise Manager website at http://<server_name>:18100
    Navigate to the Report server page. Click on the "Edit Configuration File" link.
    Delete the section that reads
    <security id="rwSec" class="oracle.reports.server.RWSecurity">
    <!--property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/-->
    <property name="oidEntity" value="reportsApp_apps10_85643151B9D911DCAF4E278FF4D47F77"/>
    </security>
    Press “OK” and let EMWebsite restart the reports server. or restart all
    and it will work ...

  • Splash screen when running from shortcut

    I have a web start app, version 1.2, with a custom splash screen and icon (2 entries in jnlp, one with type="splash"). This works just fine IF you run from the web page (I get a nice splash, followed by the "loading" window with my nice icon). If after running the app twice and allowing it to create a desktop shortcut, I run from that shortcut - the splash screen doesn't show. The plain icon is still around, just not the splash.
    Anyone else seen this and know how to fix it?
    TIA
    Mike

    The splash screen never seems to display for very long, so I can't tell if it works correctly or not. I just created my own splash screen in the application and everything works great.

  • I am using iphone4s with iOS 7 and now I cannot delete applications from the home screen, when I double click the item it didn't shows the'x' button

    Hi,
    I am using iphone4s  &amp; now I updated with ios7 after that I cannot delete apps from home screen.  Earlier when we double click the apps  then it will wiggling &amp; 'x' button will appear now it isn't  so I need  solution for this
    Thanks,
    Binoy

    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • SMARTFORM only displays first page when running

    Hi there
    I have created a 3 page Smartform.  When testing it, the output only displays the first page.  I have specified the next pages on every page as follows:
    Page 1 next page -> Page 2 (main window defined on this page)
    Page 2 next page -> Page 3 (no main window defined on this page)
    Page 3 next page -> Blank (no main window defined on this page)
    Kind Regards
    Gustav Coleske

    hi,
    just do like this,
    on first page main window,
    right click,
    create,
    flow logic,
    select command field and enble the chcck box there and provide the input 'page2',
    do like this for third page in page2 then it works.
    reward points if useful,
    regards,
    seshu.

  • NOT displaying the command window when running applications

    hi
    i'v been seraching all over the web for a way to get rid of the command window (dos shell) that appears when running a java swing based application (or any other). i currently have a batch file that loads all the required libraries into the class path and then calls the application's main class. problem is, the DOS command window stays open. is there any way to have it not display (obviously without losing my program in the process). at the very least can it be minimised automatically (just the dos window)?? though i think getting rid of it all together would be best.
    i would really love some help on this... very over seeing that dos window displayed...
    any help would be greatly appreciated.... thanks heaps
    Takis

    On Win NT
    REM get rid of commnand window
    start /B java swingapp
    REM minimize the command window
    start /MIN java swingapp
    REM for other options
    help start
    Hope this helps,
    Sathish.
    hi
    i'v been seraching all over the web for a way to get rid of the command window (dos shell) that appears when running a java swing based application (or any other). i currently have a batch file that loads all the required libraries into the class path and then calls the application's main class. problem is, the DOS command window stays open. is there any way to have it not display (obviously without losing my program in the process). at the very least can it be minimised automatically (just the dos window)?? though i think getting rid of it all together would be best.
    i would really love some help on this... very over seeing that dos window displayed...
    any help would be greatly appreciated.... thanks heaps
    Takis

Maybe you are looking for