Displaying long text fron the query designer

Hi,
I have a long description for my infoobj I want to display the long desc for the report sohow can this be done from the query designer
Regards
Priya

Hi Prahib,
Thanks for ur reply
the problem is I cant see long tetx option when i rc on the infoobj ,but when i ruun my query and say display as i CAN SEE dispaly as long decriptiopn
why I am unable to see it in query designer

Similar Messages

'Display as hierarchy' in the Query Designer

Hi,
Can anyone highlight some points or importance of 'display as hierarchy' in either rows or columns in the query designer. Also could someone put some thoughts on the 'new structure' in the query designer, is it just that we can create some new selection and new formula from the structure or is there any other explanation for its existence. Any kind of explanation would be greatly appreciated.
Thanks,
Anjali.

Hi Anjali,
display as Hierarchies:
simply enables you to select and use hierarchies for that InfoObject if available.
Structures:
you can create structures with or without keyfigures. Structures give you a great deal of flexibility and consistancy in your reports. Eg. you can create a structure that gives you a drilldown on char selections that are different for each line or column. We use that to "simulate" divisions in a drilldown that we don't have backed up by masterdata.
Also structures enable you to keep reports consistant by using the same global structure eg. for all Contribution margin reports
Hope that helped,
regards,
michael

How to display long text in SAP Query ALV layout? It only show 129 char now

I have a SAP Query which show a remark field(Max length more than 500 char), but it only show max length 129 char now. In fact, the lenght of remark field text is more than 300, and i had debug the source code, the field text value do is correct, its length do is 376.
Do anybody can help me solve the issue, let the query ALV layout can show the long text field value?
thanks very much in addvance.

Hi,
ALV can show only a restrict value length around 128 characters, many experts said that we can not extend. many suggestions is split text into some column.
Regards,

Crystal Report for Enterprise not displaying Long Text from BEx

Hello,
I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0.
The Characteristic (which is hierarchy) in the Rows section of the BEx Query is set to display long text and as such, it displays long text when the query is executed in the BEx Analyzer. However, when it comes to Crystal Report, the short text is displayed in the report. Can I display long text in the Crystal Report? How?
Thanks,
KP

Venkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM

How to display LONG TEXT STRING in Module Pool Screen ?

Hi Experts,
I want to display long text string, on screen designed through module pool(SE51). I tried to display through input/output field , but it displays it in SINGLE LINE and i have to scroll all through to view all string.
I want to display it in rectangular format . It doesnt allow me to set HEIGHT of component.
Please provide solution.
Thanks in advance.
Regards
Deepak

This is the program where u can get the WA_THEAD from other program like report and trying to display and modifying that text. U can do instead of WA_THEAD u can generate here itself and use also
*& Module pool ZMP_LTEXT *
PROGRAM ZMP_LTEXT .
TABLES: STXL.
*& Module STATUS_9000 OUTPUT
MODULE STATUS_9000 OUTPUT.
CONSTANTS:line_length type i value 132.
DATA:g_editor type ref to cl_gui_textedit,
 g_editor_container type ref to cl_gui_custom_container,
 CONT1 type scrfname value 'CONT1',
 g_repid like sy-repid,
 g_ok_code like sy-ucomm,
 g_mytable(132) type c occurs 0,
 g_mycontainer(30) type c ,
 v_result(256) type c,
 g_head like thead,
 it_line type table of tline with header line,
 wa_stxl type stxl.
DATA : BEGIN OF IT_THEAD1,
 ICON TYPE ICON-ID.
 INCLUDE STRUCTURE STXL.
DATA : END OF IT_THEAD1.
DATA : IT_THEAD LIKE TABLE OF IT_THEAD1,
 WA_THEAD LIKE LINE OF IT_THEAD.
IMPORT WA_THEAD FROM MEMORY ID 'ABCD'.
select SINGLE * from STXL into wa_stxl
 where tdname = '00006000156500000002'.
SELECT SINGLE * from STXL into wa_stxl
 where tdname = WA_THEAD-TDNAME
 AND TDID = WA_THEAD-TDID
 AND TDOBJECT = WA_THEAD-TDOBJECT
 AND TDSPRAS = WA_THEAD-TDSPRAS.
IF SY-SUBRC NE 0.
MESSAGE 'NO RECORD EXIST' TYPE 'E'.
ENDIF.
MOVE-CORRESPONDING WA_STXL TO G_HEAD.
SET PF-STATUS 'STATUS'.
SET TITLEBAR '001'.
if g_editor is initial.
 CREATE OBJECT G_EDITOR_CONTAINER
 EXPORTING
 PARENT =
 CONTAINER_NAME = CONT1
 STYLE =
 LIFETIME = lifetime_default
 REPID =
 DYNNR =
 NO_AUTODEF_PROGID_DYNNR =
 EXCEPTIONS
 CNTL_ERROR = 1
 CNTL_SYSTEM_ERROR = 2
 CREATE_ERROR = 3
 LIFETIME_ERROR = 4
 LIFETIME_DYNPRO_DYNPRO_LINK = 5
 others = 6.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CREATE OBJECT G_EDITOR
 EXPORTING
 MAX_NUMBER_CHARS =
 STYLE = 0
 WORDWRAP_MODE = cl_gui_textedit=>wordwrap_at_fixed_position
for to fix number of characters in row to 132 characers
 WORDWRAP_POSITION = line_length
 WORDWRAP_TO_LINEBREAK_MODE = cl_gui_textedit=>true
for the word to break to next line if it dont fit in line
 FILEDROP_MODE = DROPFILE_EVENT_OFF
 PARENT = G_EDITOR_CONTAINER
 LIFETIME =
 NAME =
 EXCEPTIONS
 ERROR_CNTL_CREATE = 1
 ERROR_CNTL_INIT = 2
 ERROR_CNTL_LINK = 3
 ERROR_DP_CREATE = 4
 GUI_TYPE_NOT_SUPPORTED = 5
 others = 6 .
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
REFRESH g_mytable.
 MOVE: WA_THEAD-TDNAME TO STXL-TDNAME,
 WA_THEAD-TDID TO STXL-TDID,
 WA_THEAD-TDOBJECT TO STXL-TDOBJECT,
 WA_THEAD-TDSPRAS TO STXL-TDSPRAS.
 CALL FUNCTION 'READ_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 ID = wa_stxl-tdid
 LANGUAGE = wa_stxl-tdspras
 NAME = wa_stxl-tdname
 OBJECT = wa_stxl-tdobject
 ARCHIVE_HANDLE = 0
 LOCAL_CAT = ' '
IMPORTING
 HEADER =
 TABLES
 LINES = it_line
EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 NOT_FOUND = 4
 OBJECT = 5
 REFERENCE_CHECK = 6
 WRONG_ACCESS_TO_ARCHIVE = 7
 OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_LINE INTO V_RESULT.
 APPEND V_RESULT TO G_MYTABLE.
ENDLOOP.
CALL METHOD G_EDITOR->SET_TEXT_AS_R3TABLE
 EXPORTING
 TABLE = G_MYTABLE
 EXCEPTIONS
 ERROR_DP = 1
 ERROR_DP_CREATE = 2
 others = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
 endif.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9000 INPUT
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
REFRESH G_MYTABLE[].
REFRESH IT_LINE[].
CLEAR V_RESULT.
WHEN 'SAVE'.
 CALL METHOD G_EDITOR->GET_TEXT_AS_R3TABLE
 EXPORTING
 ONLY_WHEN_MODIFIED = FALSE
 IMPORTING
 TABLE = G_MYTABLE
 IS_MODIFIED =
 EXCEPTIONS
 ERROR_DP = 1
 ERROR_CNTL_CALL_METHOD = 2
 ERROR_DP_CREATE = 3
 POTENTIAL_DATA_LOSS = 4
 others = 5
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
LOOP AT G_MYTABLE INTO V_RESULT.
 APPEND V_RESULT TO IT_LINE.
ENDLOOP.
CLEAR V_RESULT.
 CALL FUNCTION 'SAVE_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 HEADER = G_HEAD
 INSERT = ' '
 SAVEMODE_DIRECT = 'X'
 OWNER_SPECIFIED = ' '
 LOCAL_CAT = ' '
 IMPORTING
 FUNCTION =
 NEWHEADER =
 TABLES
 LINES = IT_LINE
 EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 OBJECT = 4
 OTHERS = 5
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
REFRESH G_MYTABLE[].
REFRESH IT_LINE[].
CLEAR V_RESULT.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
LEAVE TO SCREEN '0'.
*CALL SCREEN '0'.
WHEN OTHERS.
ENDCASE.
*G_OK_CODE = SY-UCOMM.
*CLEAR SY-UCOMM.
ENDMODULE. " USER_COMMAND_9000 INPUT

Providing access to Variables in the Query Designer

Greetings experts and fellow consultants,
I have a simple question, did a search and did not come up with much of an answer. Currently, we have a system with a role for BI Power Users in order for them to create ad-hoc queries. An issue we found was that these power users were not able to view variables within the query designer:
Under the "Characteristic Restrictions" pane, the variables show up as (Display Not Allowed) under their associated InfoObjects. This is presenting an issue (understandably) and I would like to provide access for these power users to see the variables.
My question is, are there any circumstances where I would want to restrict which variables are shown to the power user? Right now, I plan to allow display access to all variables (via S_RS_COMP+S_RS_COMP1 for those informed on Security). Just trying to brainstorm on whether there might be scenerios where I would want to hide certain variables.
Many thanks to all opinions, as always!

Suresh, in my above post I knew how to enable this. I just wanted to know in regards to security whether there were any exposures. Apparently, I could not find any and the changes went through without issue. The way you enable display of variables in the Query Designer is the following:
S_RS_COMP:
RSINFOAREA '*'
RSINFOCUBE '*'
RSZCOMPTP 'VAR'
ACTVT '03'
S_RS_COMP1:
RSZCOMPTP 'VAR'
RSZCOMPID '*'
RSZOWNER '*'
ACTVT '03'
Hope this helps. Of course, adjust the field values are you see fit but the minimum requirement is that RSZCOMOPTP 'VAR' (Variables) and ACTVT '03' (Display).

Display long text of characteristic in Query name

Hi All,
I have implemented RRI between my sender and receiver query.
When user will click on WBS Element in my sender query the receiver query name will be the name of that WBS Element.
After execution,I am able to see the Short text associated with Characteristic WBS ELement but i want to display Long text of WBS Element in Receiver query name.
I have tried to implement the same logic as suggested by Bhanu in following blog:
Variable screen in Web report
Kindly,suggest the appropriate solution for this issue.
Thanks in advance.

Hi All,
I am still facing the same problem.
Kindly suggest me the appropriate solution for displaying WBS Element's Long Text in Receiver's Query Name.
Thanks in advance.
Best Regards,
Nilima Rodrigues

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

How to display header title for 0MATERIAL texts in the query output?

Dear Bwers,
I have a requirement where i need to display headers titles for 0MATERIAL texts in the query output. (example "Material description"). Any ideas on how to do this?
Thanks
Raj

Kamal,
Its is as below:
Vendor Vendor Name
1001 --- Bright Industries
1002 --- Glow Industries
I want to display the header title "Vendor Name" as the title in the column instead of displaying the text without any header title.
Thanks
Raj
Message was edited by:
 Raj Singh
Message was edited by:
 Raj Singh

BW 7.0 - display of the global structures in the query designer

Hi colleagues,
When I open the gobal structures of an infoprovider in the query designer, the system shows me all levels of the structures; that is not clearly arranged.
It would be better, the system would show allways only the next level.
Is there any idea ?
regards
Dieter Gerl

Hi,
I can think of three possibilities for a solution.
1. Store the name of the required table in a config table and select at runtime
2. use an 'IF' or 'CASE' statement to deterimine which system you are currently in and then place the required varible within this statement.
3. Preferred solution: use a Field Symbol to assign the table at run-time, this way no errors will occur and your program will compile.
There are many examples of FIELD SYMBOLS on SDN and even the F1 help in SAP.
regards,
CH

How to hide a single value node hierarchy in the query designer

Hi,
I would like to perform a calculation in the infocube. It concern a count "Nb of different customers" with the following hierarchy : Country / region / City.
This KF would be read at the same time by city, region and country, and certain customers exist in 2 different region, and I have to count them only once by country.
To do this, I added a new record (at the country level when loading infocube) to deduct a number of customers in doubloons.
This line added contain only a country code and the number of cutomers in doubloons (- 23 when I have 23 cutomers in doublons) with revrese sign.
Now, I would like to use this value (-23) to have a right Nb of different customers by country, without showing the not assigned line in the report hierarchy.
How can I hide, in the query designer or the WAD, a single value node from hierarchy (NOT assigned) but take in account the value (-23) at the country level ?
Is there another solution (more simple) to perform this in the infocube ?
For information,
1) The infocube is loaded once per month, and the KF (Nb of different customers" is also performed by month.
2) I can't perform this in the report (performance problem with calculated KF).
thx.

Hi,
the short answer is "you can't", the longer is: The ADF Faces tree component is stamped for better performance. This stamping means that nodes are not rendered as JSF objects but copies of an existing component (just with a changed value). For this reason the nodes don't issue their own query for data and thus cannot be refreshed individually
Frank

How to display long text in smartforms

Hi experts,
Iam trying to display long text into smartforms.I got the long text into ITAB frm database
in the abap program.In the form interface how to define the variable?In the long text i have 6 lines.
points guaranteed
cheers
kaki

Kaki,
Delcare a table and getting the LONG TEXT is not the right way of doing this.
You create a TEXT object and change the TYPE to INCLUDE TEXT. Once that is done all you have to do specify the parameters of your long text - TEXT ID, TEXT OBJECT and TEXT NAME. These are the same parameters that you use for READ_TEXT funciton. You don't have to fetch the text manually, it happens automatically.
Make sure this is a part of the main window as this might run into multiple pages.
Regards,
Ravi
Note : Please reward the posts that help you.

How to display Long text in a JLabel with multiline??

Hi,
Suppose I have a label that displays a long text....
""This is an example label that displays long text, how to break the line????.........""
how to display it like below with one label?
""This is an example label
that displays long text, how
to break the line????.........""
Thanks

so basically do this
JLabel myLabel = new JLabel();
String theText = "<html>This is an example label 
that displays long text, how 
to break the line????.........</html>";
myLabel.setText(theText);Obivously, u dont have to use a separate string, u could just call setText or pass it into the JLabel constructor, i just separated it to make it easier to see what your supposed to do.
GOod Luck

How to display Long text in alv output

Hi,
I have developed an ALV report.It is displaying the output.
There is another requirment for alv output text field as below
From the long text fields show only the first 20 characters and afterwards the long text icon. If the icon is clicked open the long text display screen.
Please give your suggestion how to work on this requirement.
Thanks in advance

Hi,
Create a hotspot for the long text column of ALV.
When user clicks on the hotspot, handle the event to display long text screen.
You may refer sample program of hotspot ALV :
Goto SE38
Type BCALV*
Click F4
search for HOTSPOT or EVENTS & you will get a sample program.
Best regards,
Prashant

How to display long text in alv

Hi ,
I need to display the long text of particular object on ALV, with 30 char each line .
I have long text in one internal table, master table have one to maany relation with longtext table and long text contains 120 character in each line.
i need to display long text using 30 char in each line on alv. could you please suggest the soution ????
format is like
ponumber date         longtext
    1234    03/04/05   this is PO is created
                              for materail which have
                              shortage in plant.

hope u r expecting this..
optimize = 'X'
if u use OUTPUTLEN it is fixed size for that specific field, and also it reflects for next fields, to avoid that again have to mention OUTPUTLEN = 'X' for next field.
With OPTIMIZE = 'X' it will adjust based on the size.
regards...
santhosh reddy
Message was edited by:
        Santhosh Reddy

Displaying long text fron the query designer

Similar Messages

Maybe you are looking for