Displaying Menus in Abap webdynpro

Hi!!!!!
          I want to create abap dynpro and wanna to add some custom menus.Below is the example of wat actually i want to create..
Home MasterDetails        Logoff
           Vendor Master
          Customer Master
                 |
           Material Master
Kindly suggest what should i do..
thanx n regards,
Vaneet

Hi VANEETTHAKUR ,
i would suggest if your WD application is going to be a Standalone application then you can use the MENUBAR Ui element and create your own menu list , EG component name - DEMO_UIEL_MENU
if you going to embedded your application in portal then you can ask you portal guy to create iview for your applications , it will reduce lot of work . and no need to write your logic for logoff.. navigations.. etc
Regards
chinnaiya P

Similar Messages

Page cannot be displayed(error in ABAP Webdynpro iview)

Hi All ,
I am trying to create ABAP Webdynpro iview. When i try to preview it...i am getting "Page cannot be displayed". I checked the Web AS connection and it is working fine. Please put on some light on this.
Regards
Rahul

Hi Sharma,
Better U check the Iview parameters(Application name,and Namespace).
Also check it out in deployed content.
Regards
Nandha.

To display error message abap webdynpro

Hi,
I need to display an error message when the field is not selected from the drop down list..when the default value - please select-- is there.. n not other value is selected...
I did some coding where in I am getting the message for the first time... when I press a button but when I press the button for the second time after selecting some value from the drop down box.. but when I am changing it again to -
please select----, its not giving me the error message....
any demo code will be very useful.
Thanks and Regards
Tenzin

Hi Tenzin,
Regarding your problem, you can do like this.
When you checking the dropdown value on an action that time you will read the selected value index and then check if index is equal to first 1 i.e. if user has selected the first record then you can raise an error message.
For this try this logic given below :
DATA lo_nd_dropdown1 TYPE REF TO if_wd_context_node.
    DATA lo_el_dropdown1 TYPE REF TO if_wd_context_element.
    DATA ls_dropdown1 TYPE wd_this->element_dropdown1.
    navigate from <CONTEXT> to <DROPDOWN1> via lead selection
    lo_nd_dropdown1 = wd_context->get_child_node( name = wd_this->wdctx_dropdown1 ).
    @TODO handle not set lead selection
    IF lo_nd_dropdown1 IS INITIAL.
    ENDIF.
    get element via lead selection
    lo_el_dropdown1 = lo_nd_dropdown1->get_element( ).
    @TODO handle not set lead selection
    IF lo_el_dropdown1 IS INITIAL.
    ENDIF.
    data : lv_index TYPE i.
    lv_index = lo_el_dropdown1->get_index( ).
    IF lv_index = 1.
report message
      lo_message_manager->report_attribute_error_message(
      message_text              = 'Please select Airline Code'
      element                   = lo_el_dropdown1
      attribute_name            = 'CARRID' ).
    ENDIF.
Hopes this will helps you.
Regard
Manoj Kumar

Header information not displaying in ABAP Webdynpro record working time

1. I am not seeing the header information, personnel number, name, cost center, on the ABAP Webdynpro record working time timesheet. When I run the timesheet profile in CAT2 the header contains the personnel number, name, cost center, but these do not display when the ABAP Webdynpro timesheet is run
2. Is there a version of the ABAP webdynpro timesheet that prompts for the personnel number, date and profile prior to executing the timesheet? I want to define an ESS link for managers to update timesheets of individual teammates. The teammate do not necessarily have to be their direct reports

Hi David,
CATS Webdynpro application is a OIF fpm. Please check if you have performed the FPM IDR configuration properly.
In standard, the ESS CATS does not prompt for the personnel number except in CE scenario. In MSS addon, you have an option to launch the ESS CATS application on-behalf of the employee. Please refer to the sap library documentation.
Hope this helps,
Regards,
Roy

How to create a view to display Multiple lines of Text using ABAP WebDynpro

Hi,
I need to create a static view page in ABAP WebDynpro that displays Static text data in multiple paragraphs. I tried to use textview, formatted text, text edit controls by binding the textcontrol to a text object that is created in so10, but the output I am getting is only one line and the character count is limited to 60 to 65 characters.
I would like to know which control needs to be used in ABAP Webdynpro to get multiple lines displayed with text formatting like Paragraph, Indenting and Size.....
Thanks for your time!
Madhavi.

Find the sample codes:
data sapscript_lines     type tlinetab.
data sapscript_lines1     type tlinetab.
data sapscript_tline     type tline.
data sapscript_head      type thead.
data text                type string.
data formatted_text type ref to cl_wd_formatted_text.
call function 'DOCU_GET'
    EXPORTING
      id                = 'TX'
      langu             = 'D' "Germany language
      object            = 'WDR_TEST_HELP_EXP1'
    IMPORTING
      head              = sapscript_head
    TABLES
      line              = sapscript_lines
    EXCEPTIONS
      no_docu_on_screen = 1
      no_docu_self_def = 2
      no_docu_temp      = 3
      ret_code          = 4
      others            = 5.
if sy-subrc <> 0.
    text = space.
endif.
formatted_text = cl_wd_formatted_text=>create_from_sapscript(
    sapscript_head = sapscript_head
    sapscript_lines = sapscript_lines
" set it into the context
if Not ( formatted_text is initial ).
    wd_context->set_attribute(
    name = 'FORMATTED'
    value = formatted_text->m_xml_text ).
endif.
clear sapscript_head.
clear sapscript_lines.
*Get the text created by SO10
CALL FUNCTION 'READ_TEXT_INLINE'
EXPORTING
    ID                    = 'ST'
    INLINE_COUNT          = 1
    LANGUAGE              = 'E' "English language
    NAME                  = '85XX_FOOTER'
    OBJECT                = 'TEXT'
LOCAL_CAT             = ' '
IMPORTING
   HEADER                = sapscript_head
TABLES
    INLINES               = sapscript_lines1
    LINES                 = sapscript_lines
EXCEPTIONS
ID                    = 1
LANGUAGE              = 2
NAME                  = 3
NOT_FOUND             = 4
OBJECT                = 5
REFERENCE_CHECK       = 6
OTHERS                = 7
formatted_text = cl_wd_formatted_text=>create_from_sapscript(
    sapscript_head = sapscript_head
    sapscript_lines = sapscript_lines
" set it into the context
if Not ( formatted_text is initial ).
    wd_context->set_attribute(
    name = 'FORMATTED1'
    value = formatted_text->m_xml_text ).
endif.

Abap webdynpro layout and application not displayed

Hi Gurus ,
    We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
    Following are the list of error in EHP4 system ,
                1) Layout of ABAP Webdynpro Component are not displayed .
                2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
    error are as follows while trying to view layout in abap webdynpro application :
    http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
      If any one have information for this kindly let me know .
Thanks :
Vishwas
Edited by: vishwassap on Aug 12, 2010 7:17 AM

Hi,
   Thanks for reply ,
   Above mention is not link ,its an error in pop up inside layout of view .
I resolve this problem by deploying mime object by program in R/3 , so that i can able to view layout .
But still application is not displayed it shows error like
1) 'UCF_LoadingPlaceHolder' is undefinged by testing through R/3 and starting view is not opened .
2) 'UCF_Image' is undefined by testing through portal but starting view is opened here .
3) while navigating from one view to any view or window is not possible , it gives error
4) When I navigate from one view to other .
The following error text was processed in the system D36 : The ASSERT condition was violated.
The error occurred on the application server RELSRMSR2_D36_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DISPATCH_NW7_EVENT of program CL_NW7_VIEW_ELEMENT_ADAPTER===CP
Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR_LS==========CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Edited by: vishwassap on Aug 13, 2010 8:31 AM

How to display HTML files using ABAP Webdynpro?

Hi,
I have a html index file and a bunch of other files accessed by the index file in a specific directory on the SAP server. I'd like to display the index file via ABAP webdynpro and allow the users to click on what they need to see. How can I achieve this using utilizing the ABAP webdynpro technology ?
Thanks!

Hi Thomas,
Thanks for taking the time to answer my question.
I have the main html file and all other files needed by the main file in one directory on the application layer of SAP. I'd like to provide the user with a link, by clicking on which they should be able to get to the main html file using the browser. This is just a standalone application.
I can try the approach using BSPs, however, I'm new to that area. Could you point me in the right direction to get started?

Display Word Document in ABAP WebDynpro

Hi All,
We have a number of word documents stored in the Business Document Navigator (Transaction OAOR) that we would like to display within a simple ABAP WebDynpro. Demo program SAPRDEMO_FORM_INTERFACE shows how to retrieve a document from BDS via class cl_bds_document_set. However, I am not seeing a similiar program for ABAP Web Dynpro.
I was hoping that WebDynpro test application IOS_TEST_SIMPLE_MS would do the trick; however that appears to only work for a MIME repository object. Is there a way to display these documents through ABAP WebDynpro? Can anyone point me to a sample program? Thanks.
John

Hi John
Have a look at this thread [ Approach content repository other way then URL approach |Re: Approach content repository other way then URL approach;.
Thomas Jung delivers some (as always) excellent answers to a very similar problem. If the document is in DMS or BDS really doesn't matter so if I were you I would follow the "cached response" path.
Also, do a google-search for -- abap "cached response" -- and you will find some additional links here (Thomas has even more to offer...).
If you do follow this path please share some details as a follow up in this thread for the benefit of the community at large.
Regards, Johan

Display Smartform Pdf output in ABAP Webdynpro application

Hello,
there is a solution for displaying Smartform output in Java Webdynpro application in this forum. Since i want to start an project in ABAP Webdynpro i need a solution for this technology since i don't want to recreate all the paperwork again using Adobe. Is there any solution available?
Thanks
Udo Ahle

Hello,
this is the solution which i was able to implement using the hints given by Heidi and Thomas. Thank you for the support. With this solution it is possible to reuse oldstyle sapscripts and smartforms in todays environment. Here is the sample code which solves the problem:
In WDA you define for example a pushbutton to start the display of the PDF.
In the onaction method you implement:
method ONACTIONSHOW_PDF .
data LX_pdf type xstring.
* get PDF from existing sapscript or smatform
call function 'Y_PDF_GET' destination '46c'
    IMPORTING
      ex_PDF = LX_PDF.
* append the pdf to the response
cl_wd_runtime_services=>attach_file_to_response(
    i_filename = 'Hello.PDF'
    i_content   = lx_pdf
    i_mime_type = 'application/pdf'
    i_in_new_window = 'X'
    i_inplace       = 'X' ).
endmethod.
The function 'Y_PDF_GET' is implemented as follows:
FUNCTION Y_PDF_GET .
*"*"Local interface:
*" EXPORTING
*"     VALUE(EX_PDF) TYPE XSTRING
*" TABLES
*"      ET_OTF STRUCTURE ITCOO OPTIONAL
data: lf_filesize type i,
        lt_otf type table of ITCOO,
        lt_lines type table of tline,
        tline type tline.
* start sapscript or smatforms and return
perform make_otf.
CALL FUNCTION 'READ_OTF_FROM_MEMORY'
    TABLES
      OTF                = lt_otf
   EXCEPTIONS
     MEMORY_EMPTY       = 1
     OTHERS             = 2
et_otf[] = lt_otf.
CALL FUNCTION 'CONVERT_OTF'
   EXPORTING
     FORMAT                      = 'PDF'
*   MAX_LINEWIDTH               = 132
*   ARCHIVE_INDEX               = ' '
   IMPORTING
     BIN_FILESIZE                = lf_filesize
    TABLES
      OTF                         = lt_otf
      LINES                       = lt_lines
   EXCEPTIONS
     ERR_MAX_LINEWIDTH           = 1
     ERR_FORMAT                  = 2
     ERR_CONV_NOT_POSSIBLE       = 3
     OTHERS                      = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* convert tline to xstring as needed in
* in web dynpro
field-symbols <X>.
data: st(268) type c.
data l1 type i.
data len type i.
data maxline type i value 134.
l1 = 0.
loop AT lt_lines INTO tline.
    clear st.
    st+l1(maxline) = tline.
    len = maxline + l1.
    l1 = maxline - strlen( tline ).
    ASSIGN st TO <x> TYPE 'X'.
    CONCATENATE ex_pdf <x>(len) INTO ex_pdf.
endloop.
ENDFUNCTION.
The make_otf for sapscript is the following:
* the next attribute enables the otf output.
* no other output will be generated
<b>options-TDGETOTF = 'X'</b>
CALL FUNCTION 'OPEN_FORM'
       EXPORTING
*         APPLICATION        = 'TX'
*         ARCHIVE_INDEX      = ARCHIVE_INDEX
         ARCHIVE_PARAMS     = ARCHIVE_PARAMS
            DEVICE             = DEVICE
            DIALOG             = ' '
            FORM               = FORM
            LANGUAGE           = language
           OPTIONS            = OPTIONS
*     IMPORTING
*          LANGUAGE           =
*          NEW_ARCHIVE_PARAMS =
*          RESULT             =
       EXCEPTIONS
            CANCELED           = 1
            DEVICE             = 2
            FORM               = 3
            OPTIONS            = 4
            UNCLOSED           = 5
            OTHERS             = 6.
*... make some write forms
data lT_OTF     type table of     ITCOO.
* get the otf data
CALL FUNCTION 'CLOSE_FORM'
*     IMPORTING
*          RESULT   = result
       TABLES
           OTFDATA = lt_otf
       EXCEPTIONS
            UNOPENED = 1
            OTHERS   = 2.
* put otf into memory for later usage
if not lt_otf is initial.
    CALL FUNCTION 'SAVE_OTF_TO_MEMORY'
* EXPORTING
*   MEMORY_KEY       = 'DEF_OTF_MEMORY_KEY'
      TABLES
        OTF              = lt_otf.
endif.
For Smartforms technology it is possible to implement the same concept.

Image UI element is not displayed in Abap webdynpro application

Hi Experts,
I need your advice on below issue.
I have created new ABAP Webdynpro application just to
display employee photo.
When loading the application, I generated a dynamic URL for
a image in webdynpro application path in cache to map to Image UI Element. It
is working well in DEV and QA environment. But it is not displaying when loaded
in PRD system.
Please suggest where to check the cache properties in system
in order to resolve this issue.
The user can access the application path, is there any chance for security issue in the same path?
I suspect the URL is cleared before user access it, can it be controlled via any config?
Looking forward for your valuable inputs.
Thanks,
Swetha

HI Swetha,
Maybe the image is not present in MIME repository for the PRD system.
Please check.
Regards,
Hancila

Display SAP's Business Worklplace with Abap WebDynpro

Hi,
is it possible to display SAP's Business Worklplace with Abap WebDynpro ?
There is a customer req. The person would like check his emails etc.
Regards
Alexander

Hello,
You cannot put SAP GUI applications/transactions into a web dynpro component.
But you could build your own custom WD component. It isn't that hard to get the work items from your business workplace to be displayed in a custom application. Check the function modules GETINBOX (or there might be possibly something starting with SAP_WAPI* - SAP_WAPI-starting functions are the standard workflow API functions). Basically you just give for the function the user ID and it will return you the list of items the user is having in his business workplace. Then there are useful functions in SAP_WAPI* to for example display the work item description, etc.
I am not sure how you can get the notifications (="emails") from business workplace, but I would imagine that there is some function you can use similarly and it shouldn't be that hard.
Of course, if you have Portal, you should definately take UWL into account. With UWL you will already have a standard web-enabled workplace (it has basically all the same functionalitites as Business Workplace.) From UWL you can even launch the same SAP GUI transactions that you are currently launching from the tasks in workplace. It is purely an configuration issue.
Regards,
Karri

Display pdf into an abap webdynpro view: disable navigation

Hello
is it possible to disable the navigation panes and/or the toolbar and/or statusbar of acrobat reader inside your abap webdynpro application?
When you specify for example #navbar=0 as parameter then you disable the navigation pane.
Eg: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cfb80249-0801-0010-3eaa-829afeac170f#navpanes=0 and https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cfb80249-0801-0010-3eaa-829afeac170f
Is it possible in an abap webdynpro with a interactive form element?
Thanks
Luc

Hi Luc M,
We can Disable the ToolBar of Interactive Form, this can be done by writing the Code in WDDOMODIFY Method of the respective View.
Do add the Following the Lines of Code in the WDDOMODIFY Method
DATA: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT( 'INTERACTIVE_FORM_UI_ELEMENT_NAME' ).
LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
LR_METHOD_HANDLER->set_hide_toolbars( abap_true ).
***With the above code you can only disable the ToolBar.
Regards
Pradeep Goli
Edited by: Pradeep Goli on Mar 17, 2009 2:45 PM

Displaying both ABAP webdynpro and Java Webdynpro tasks in the UWL

Hi,
We have two an issue when trying to get the UWL to process two different types of workflow tasks : ABAP webdynpro and Java webdynpro.
Examples of these tasks are:
TS12300097 u2013 LeaveRequestApprover u2013 Java Webdynpro
TS17900100 - ASR_PROCESS_EXECUTE u2013 ABAP webdynpro
We have two backend systems configured
SAP_ECC_Financials u2013 This has the WAS host pointing to the java stack (xxx:50000)
SAP_ECC_Workflow u2013 This has the WAS host pointing to the ABAP stack (xxx.80xx)
In transaction SWFVISU all the tasks which use Java webdynpro have been configured to use the u2018Javau2019system (SAP_ECC_Financials) using the SYSTEM_ALIAS parameter
In the UWL configuration the system SAP_ECC_Workflow has been registered
In addition to this all u2018Javau2019 tasks have had an extra UWl config XML created to ensure that the SYSTEM_ALIAS is set to SAP_ECC_Financials
The system SAP_ECC_Workflow has been re-registered
The UWL cache has been cleared
However when we try to launch the java webdynpro tasks the system is trying to access the ABAP stack (It is still trying to access the Web AS location for the system SAP_ECC_Workflow even though the system alias was specified as SAP_ECC_Financials )
The ABAP webdynpro tasks (in this case a HCM process and form) are launched correctly
If we try the reverse (i.e register the Java system SAP_ECC_Financials and change the SYSTEM_ALIAS parameter for the ABAP webdynpro tasks to system SAP_ECC_Workflow) then the reverse happens. The java tasks can be launched and the ABAP tasks cannot.
Does anyone have a solution to this problem. Surely other people have implemented both ABAP and Java webdynpro workflows?
Any help much appreciated
Andrew

Thanks a lot for all your replies..
The workitem type registration has been done already, but still it doesn't work..
But here is the actual problem...
There is a link 'Execute Workitem' in the inbox of the approver, or the second level manager...
In the leave application, when we click on this link it is taking to the portal as the task is the Webdynpro Java application task. Whereas, when using ABAP webdynpro application task, it is taking to R/3 - which means that the user cannot access this link without R/3 access. The users are given only portal access, they don't have access to backend R/3.
The requirement is that the link has to take the user to portal directly instead of R/3 - i.e it should ask only for the portal id and password.
Since it was working fine with leave application, I changed the task to Java webdynpro task, but I think the Java Webdynpro application is not deployed in the server.
Please can anybody suggest.
Best Regards,
Sushmitha

SOFM: Dsiplay method is not working when called from ABAP Webdynpro

Hi All,
I want to open an attachment from ABAP Webdynpro.
I have approached in this fashion:
1) Get the attachments as SOFM object key
2) On Click of a link on Webdynpro, I am calling a function module within which I am creating an instance of the SOFM object
3) Then I am calling the DISPLAY method
It is not opening.
But, if it opens when I driectly execute the function module. It open when I directly test the business object.
Any Idea ?
Thanks & Regards,
Deb

Display Method uses the Dialogue Module, You should not access such methods in web dynpro which are SAPGUI specific.
Web Dynpro Applications are run in Browser environment which cannot understand Dialog, it can understand only HTML.
Read the attachments and get the content and use FileDownload UI element to show it to user.
Abhi

ABAP Webdynpro Development - Script Error when Accessing Visual Elements

I am encountering a strange error at my client . I can't use the Abap Webdynpro visual elements to build views .
To reproduce the error :
- T-code SE80
- Open up any ABAP webdynpro component .
- Open up one of the view and go on Tab Layout .
Normal Screen : You would see many WYSIWYG items ( buttons, radiobutton , text elements etcu2026. ) at the left side u2026 these elements are used to build the view .
Here : No elements displayed and when we click on that area we get an error .
Instead of the elements to get displayed .. lines are displayed and when you try to open up ( click ) the lines , an internet explorer script error stating the following occurs ( although the abap wendynpro is edited in SAP Gui ) :
An Error has occured in the script on this page .
Line : 1
Char : 25
Error : Object Required
Code: 0
URL : http://hdrerpdev05.bchydro.bc.ca:8100/sap/bc/wdvd/toolbar.html?_vdrespkey=4KE8FGJO3P88DO8K5XCEYHTEA&_vdframe=toolbar&usedynp=&usepat=&sap-client=100
Anybody had had the same kind of error before ^^????
Thanks and Best Regards !

Hi,
we are getting the some what related errors in SE80 -> Web Dynpro Layout
An Error has occured in the script on this page .
Line : 1
Char : 1
Error : Object Expected
Code: 0
URL : http://<FQDN>:8000/sap/bc/wdvd/painting.html?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=painting&sap-client=230
An Error has occured in the script on this page .
Line : 110
Char : 2
Error : Could not complete the operation due to error 80020101
Code: 0
URL : http://<FQDN>:8000/sap/bc/wdvd?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=no_add_ui_lib&sap-client=230
Recently, we have upgraded our ERP system (SAP ECC 6.0 SPS17) with EHP4 SPS8. SAP_BASIS and SAP_ABA patch level same on 701_0008.
FQDN is mantianed at icm/host_name_full parameter in system as well as in /etc/hosts file with associated system IP address.
As suggested by Ted Dinh, we do not find any duplicate MIME files in our MIME Repository (SE80) and we cleared/invalidated ICM cache many times in problem analysis.
As suggested by Thierno Diarra , in our affected system domain WDY_MD_UI_ELEMENT_CATEGORY is well maintained in value ranges.
We have raised SAP OSS Message for the same, they told us to check dns server connectivity/settings with the affected system. we did the suggested DNS settings in affected system. But still the same error message is occuring. They have suggested same sap notes like #979039 and #1009930 & #1483210 , but all the corrections/suggections/SICF service status as mentioned, are found OK in our system.
Regards,
Bhavik G. Shroff

Displaying Menus in Abap webdynpro

Similar Messages

Maybe you are looking for