Displaying messages in standby mode
Hi!
I have E50 and yesterday I saw my colleges E50 and was surprised, then I saw how “New messages” are displayed in standby mode. Then I receive New message it just is displayed “New Message (1)” and on his E50 was shown “Sender” and Preview of message text! Is it an option of some fresh version of prone software or it is adjustable? I couldn’t find where I can change option to get the same presentation!
Thank You.
i own 3250, and mine absolutely not support it!!
but i ever looked something like u said, on n73..
i think it's a new firmware interface, try to update your firmware..
3315 · 3650 · 3230 · 3250 · 5700
Similar Messages
-
Nokia N9 on Standby Mode Displaying Time
My N9 is displaying time on the standby mode. Is there a way to switch off this feature.
Thanks
Solved!
Go to Solution.Turn it off in menu->settings->device->display/screen-> wait/standby mode. Sorry for the bad translation. I don't bother to turn on english as it needs a reboot
-
Curve 8900 Keeps going in Standby Mode
Hi,
My Curve 8900 keeps going into Standby mode by itself even when nothing has been touched. Gives message "Entering Standby mode. Press the Mute key again to exit Standby mode." Looks like others have posted similar problems. The device is quite new but without warranty.
Thanks.
AnilMine keeps going into standby too. What a piece of **bleep** all blackberrys are. If it weren't for the messenger I would have switched to a nokia a long time ago. I doubt this thread will raise a response from RIM.
-
Standby mode message whenI turn off TV
What does it mean that when I turn off my TV ( and STB ) a message flashes quickly that ' the STB is in standby mode, press MENU to watch FIOS TV'. Why does it do that? How do I stop it from doing that? I did recently get the 1.62 upgrade if that matters. Is getting this message a bad thing? Do I have something set up wrong? Thanks.
I beg to differ about thisbeing a silly message. I have two TV's and STB. On both, there are occasions where, when powering down, the STP shuts down but not the TV. Formerly, I would not know this until the next day when I powered up the STB (and, as often as not, turned off the TV at the same time). In addition to the power wasted by leaving the TV on all night, it would frustrate members of my family who were trying to view the TV. Now, they are told immediately that the TV is still on, and they can take the neccessary corrective action. For us, this is far from a silly message, it is a solution to a problem that has plagued us since we got FIOS (and n Cablevision before that).
Score 1 for FIOS. -
how can i cancel request for erasing iPhone?? i pressed erase an iphone instead of lost mode or display message =( i want to cancel this operation
my lost iphone is still offline and erasing not started yet and i want to cancel this request!You can't, but after the erasure the activation lock will still be in place, so the device will be useless for anyone not knowing your apple-id and password.
-
ASA Active/Standby mode and Hello messages
Hi Everyone,
On ASA Active/Standby mode i know thatsay inside or any other interface of active and standby ASA should connect to same switch and vlan.
When we assign say ip address to inside interface of both ASA like
ip address 192.168.x.1 255.255.255.0 standby 192.168.x.2 255.255.255.0
Need to know if these inside interface talk to each other or not?
Do they send hello messages?
Thanks
MAheshHi Mahesh,
The ASA Active/Standby Failover pair uses both the dedicated Failover interface and the actual Data interfaces to monitor the "health" of the Failover pair.
The units send Failover hello messages and wait for a reply to determine if the other unit is alive or not.
By default all Physical interfaces are automatically monitored. To my understanding Logical interfaces such as Trunk interfaces are NOT monitored by default. You will have to configure monitoring for each subinterface of the Trunk that you want to be monitored.
You would use the command
monitor-interface
Check the Command Reference section for this
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/m.html#wp2123112
I would also suggest reading the following section of the Configuration Guide
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/ha_overview.html#wp1079010
It has information of the Unit and Interface health monitoring of the Failover pair.
If you want to debug Failover activity you could use the command
debug fover
It has multiple additional parameter after that command
Here is the Command Reference section for the debug command
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/d1.html#wp2093011
You can even attach a computer on the switch between the ASAs and capture the packets between them an you can see the Failover messages etc from the ASAs
- Jouni -
Standby-mode by accident whit pin request to reenter.
Hello community,
I have a problem_ sometimes my bb sets into that 'kind' of standby mode, where nobody can reach me, because I got kicked out of the carriers circuit.
As soon as I notice it, the device asks me to reenter the pin to get into the carrier.
Sometimes there are a few days nothing happens and sometimes it happens twice or three times a day.
ADVICE and HELP requested.Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try booting into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also want to talk to your carrier to see if they can look at their network for any issues.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
STB Entering Standby Mode By Itself
Every few hours when our two televisions are not in use the SD STBs enter standby mode their own and display a screensaver. The screensaver has been repeatedly been recorded by our two TiVo DVRs instead of programs. The STBs are using system 1.7
Can the STBs be set to NEVER enter standby mode? Would requesting new STBs make any difference?
This problem was reported by other users in April but no solution was ever posted.
Solved!
Go to Solution.Ok, we too have had this intermittent problem for weeks now! A new FIOS STB did not solve the problem.
I think I found the solution but had to leave for Christmas Holidays before I could prove it!
I believe the problem lies with the connection between the two; TIVO and FIOS.
The issue: your Standard Definition TIVO box is trying to record High Definition channels.
The signal is unable to complete so it drops and the FIOS box shuts off.
You most likely have not deselected the High Definition channels from your TIVO channel list AND have TIVO suggestions turned on. TIVO suggestions typically run when nothing else is set to record (often late night hours).
Try the following and please let me know how you make out! I've been searching the web for days and have seen this problem repeatedly but no viable solution.
Go to:
1. Tivo Central
Messages & Settings
Settings
Channels
Channel List
...Page down and deselect each HD channel
2. Messages & Settings
Settings
Recording
Tivo Suggestions...change to No
I am not sure if only using option 1 above will work, but you could try it if you prefer to use TIVO Suggestions.
You might also want to deselect channels that are not on your cable line-up.
The reason I think this is the problem; on our first 'standby' program recorded overnight, the initial split second on the recording was a valid channel-the picture was visible. As soon as the TIVO Suggested recording changed channels to the HD channel, the picture dropped, the Not-subscribed HD message appeared then the Standby message came up.
Good Luck, Merry Christmas, Happy Holidays and let me know how you make out! -
Iphone 6 randomly shutdown in standby mode
My Iphone 6 16gb randomly shutdown in standby mode, i only can turn it on by hold POWER + HOME. here is the log :
{"name":"Reset count","bug_type":"115","os_version":"iPhone OS 8.1 (12B411)"}
Incident Identifier: F0B79DBE-0BE1-431A-813E-70E7E2C17942
CrashReporter Key: 7305c452a84bf7ce3738c4bedf794c8e76fc4c58
Date: 2014-11-24 09:17:58 +0700
Reset count: 1
Boot failure count: 2
Boot faults: wdog btn_rst
Boot stage: 32
Boot app: 2681261667
Is this a hardware issue or software issue? thanksHi hnguyen1982,
If you are having an issue with your iPhone shutting down unexpectedly, I would suggest that you troubleshoot using the steps in this article -
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
7.3.2.6 crashes when coming out of standby mode
Has anyone else seen this problem with iTunes 7.3.2.6?
It crashes when coming out of standby mode. There is an error report I can send to Microsoft, but since it's an Apple program, I never send it.
Using standby was OK with iTunes 7.2.Okay. Let's try getting a fresh one through to Roy.
If the log has been "live" for a while, info about every crash of any description will have been being added to it (with my Morrowind crashing on a daily basis, i once found a DrWatson log on belladonna that was over a GB in size). So it'll be easier for him to work through a log with just one crash on it.
Will run through my standard instructions just so i don't forget anything. (Sorry, I know you're up to speed on this sort of thing, no offense meant.)
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and send it as an attachment to this email address: [email protected]
In the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing -
RE: Processing Logged messages in batch mode ?
Paul,
One way to findout the log file is to inspect your
<CentralServer>.log. It should have a line something like..
Redirecting output to <someDirectory>/forte_ex_26564.log.
That is the file the the current ftexec is writing to.
This has worked fine for me.
Another way is to sort the files by date, and look at the latest
ones.
...I'd love to hear about a better way to do this.
Ajith Kallambella. M
Forte Systems Engineer
International Business Corporation.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, March 01, 1999 9:06 AM
To: Forte-Users (Adresse de messagerie)
Subject: Processing Logged messages in batch mode ?
Hi,
When I launch partitions, they display a whole bunch of 'useful' messages.
(maybe using 'task.logmgr.putline')
I'm afraid these traces go directly in the launcher's log file under
$FORTE_ROOT/log
As I get control only when the ftexec ends for the next instruction to be
interpreted,
how can I figure out which of these log files relates to the ftexec I just
got executed ?
(example: "forte_ex_3613.log")
I found '/output' for node managers, but for single ftexec(s) ?
(thinking also about re-used ftexec(s))
Thanks in advance,
j-paul gabrielli
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Paul,
One way to findout the log file is to inspect your
<CentralServer>.log. It should have a line something like..
Redirecting output to <someDirectory>/forte_ex_26564.log.
That is the file the the current ftexec is writing to.
This has worked fine for me.
Another way is to sort the files by date, and look at the latest
ones.
...I'd love to hear about a better way to do this.
Ajith Kallambella. M
Forte Systems Engineer
International Business Corporation.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, March 01, 1999 9:06 AM
To: Forte-Users (Adresse de messagerie)
Subject: Processing Logged messages in batch mode ?
Hi,
When I launch partitions, they display a whole bunch of 'useful' messages.
(maybe using 'task.logmgr.putline')
I'm afraid these traces go directly in the launcher's log file under
$FORTE_ROOT/log
As I get control only when the ftexec ends for the next instruction to be
interpreted,
how can I figure out which of these log files relates to the ftexec I just
got executed ?
(example: "forte_ex_3613.log")
I found '/output' for node managers, but for single ftexec(s) ?
(thinking also about re-used ftexec(s))
Thanks in advance,
j-paul gabrielli
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
FW: Processing Logged messages in batch mode ?
If you rename your partitions' log files before running the app and do the
renaming according to each partitions' purpose or partition number, then
after running the app, just go to the approprate log file. You can do the
renaming using system agents so that it is not a manual process.
Essentially, you know in advance where the output goes.
-Ravi
-----Original Message-----
From: J-Paul GABRIELLI [SMTP:[email protected]]
Sent: Monday, March 01, 1999 11:29 AM
To: 'Kalidindi, Ravi CWT-MSP'
Subject: RE: Processing Logged messages in batch mode ?
Sorry, I was looking for a batch way, when the partition is dead (i.E.
can't monitor it nor view it in escript)
No gui :-)
j-p
-----Message d'origine-----
De: Kalidindi, Ravi CWT-MSP [SMTP:[email protected]]
Date: lundi 1 mars 1999 17:51
A: 'Kallambella, Ajith'; 'J-Paul GABRIELLI'; 'Forte'
Objet: RE: Processing Logged messages in batch mode ?
In case of installed applications or running in distributed mode, you can
use econsole to choose the appropriate active partition and view the log
file for it. The "log file" window also displays the name of the
particular
log file. In case of installed applications, you can also rename the log
file for your partitions.
Hope that helps
-Ravi Kalidindi
Born Info Svcs Group
-----Original Message-----
From: Kallambella, Ajith [SMTP:[email protected]]
Sent: Monday, March 01, 1999 9:47 AM
To: 'J-Paul GABRIELLI'; 'Forte'
Subject: RE: Processing Logged messages in batch mode ?
Paul,
One way to findout the log file is to inspect your
<CentralServer>.log. It should have a line something like..
Redirecting output to <someDirectory>/forte_ex_26564.log.
That is the file the the current ftexec is writing to.
This has worked fine for me.
Another way is to sort the files by date, and look at the latest
ones.
...I'd love to hear about a better way to do this.
Ajith Kallambella. M
Forte Systems Engineer
International Business Corporation.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, March 01, 1999 9:06 AM
To: Forte-Users (Adresse de messagerie)
Subject: Processing Logged messages in batch mode ?
Hi,
When I launch partitions, they display a whole bunch of 'useful'messages.
(maybe using 'task.logmgr.putline')
I'm afraid these traces go directly in the launcher's log file under
$FORTE_ROOT/log
As I get control only when the ftexec ends for the next instruction tobe
interpreted,
how can I figure out which of these log files relates to the ftexec Ijust
got executed ?
(example: "forte_ex_3613.log")
I found '/output' for node managers, but for single ftexec(s) ?
(thinking also about re-used ftexec(s))
Thanks in advance,
j-paul gabrielli
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>If you rename your partitions' log files before running the app and do the
renaming according to each partitions' purpose or partition number, then
after running the app, just go to the approprate log file. You can do the
renaming using system agents so that it is not a manual process.
Essentially, you know in advance where the output goes.
-Ravi
-----Original Message-----
From: J-Paul GABRIELLI [SMTP:[email protected]]
Sent: Monday, March 01, 1999 11:29 AM
To: 'Kalidindi, Ravi CWT-MSP'
Subject: RE: Processing Logged messages in batch mode ?
Sorry, I was looking for a batch way, when the partition is dead (i.E.
can't monitor it nor view it in escript)
No gui :-)
j-p
-----Message d'origine-----
De: Kalidindi, Ravi CWT-MSP [SMTP:[email protected]]
Date: lundi 1 mars 1999 17:51
A: 'Kallambella, Ajith'; 'J-Paul GABRIELLI'; 'Forte'
Objet: RE: Processing Logged messages in batch mode ?
In case of installed applications or running in distributed mode, you can
use econsole to choose the appropriate active partition and view the log
file for it. The "log file" window also displays the name of the
particular
log file. In case of installed applications, you can also rename the log
file for your partitions.
Hope that helps
-Ravi Kalidindi
Born Info Svcs Group
-----Original Message-----
From: Kallambella, Ajith [SMTP:[email protected]]
Sent: Monday, March 01, 1999 9:47 AM
To: 'J-Paul GABRIELLI'; 'Forte'
Subject: RE: Processing Logged messages in batch mode ?
Paul,
One way to findout the log file is to inspect your
<CentralServer>.log. It should have a line something like..
Redirecting output to <someDirectory>/forte_ex_26564.log.
That is the file the the current ftexec is writing to.
This has worked fine for me.
Another way is to sort the files by date, and look at the latest
ones.
...I'd love to hear about a better way to do this.
Ajith Kallambella. M
Forte Systems Engineer
International Business Corporation.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, March 01, 1999 9:06 AM
To: Forte-Users (Adresse de messagerie)
Subject: Processing Logged messages in batch mode ?
Hi,
When I launch partitions, they display a whole bunch of 'useful'messages.
(maybe using 'task.logmgr.putline')
I'm afraid these traces go directly in the launcher's log file under
$FORTE_ROOT/log
As I get control only when the ftexec ends for the next instruction tobe
interpreted,
how can I figure out which of these log files relates to the ftexec Ijust
got executed ?
(example: "forte_ex_3613.log")
I found '/output' for node managers, but for single ftexec(s) ?
(thinking also about re-used ftexec(s))
Thanks in advance,
j-paul gabrielli
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Processing Logged messages in batch mode ?
Hi,
When I launch partitions, they display a whole bunch of 'useful' messages.
(maybe using 'task.logmgr.putline')
I'm afraid these traces go directly in the launcher's log file under $FORTE_ROOT/log
As I get control only when the ftexec ends for the next instruction to be interpreted,
how can I figure out which of these log files relates to the ftexec I just got executed ?
(example: "forte_ex_3613.log")
I found '/output' for node managers, but for single ftexec(s) ?
(thinking also about re-used ftexec(s))
Thanks in advance,
j-paul gabrielliThe instrument "LogFile" on the active partition agent contains the name of
the log file.
At 10:47 AM 3/1/99 -0500, Kallambella, Ajith wrote:
Paul,
One way to findout the log file is to inspect your
<CentralServer>.log. It should have a line something like..
Redirecting output to <someDirectory>/forte_ex_26564.log.
That is the file the the current ftexec is writing to.
This has worked fine for me.
Another way is to sort the files by date, and look at the latest
ones.
...I'd love to hear about a better way to do this.
Ajith Kallambella. M
Forte Systems Engineer
International Business Corporation.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, March 01, 1999 9:06 AM
To: Forte-Users (Adresse de messagerie)
Subject: Processing Logged messages in batch mode ?
Hi,
When I launch partitions, they display a whole bunch of 'useful' messages.
(maybe using 'task.logmgr.putline')
I'm afraid these traces go directly in the launcher's log file under
$FORTE_ROOT/log
As I get control only when the ftexec ends for the next instruction to be
interpreted,
how can I figure out which of these log files relates to the ftexec I just
got executed ?
(example: "forte_ex_3613.log")
I found '/output' for node managers, but for single ftexec(s) ?
(thinking also about re-used ftexec(s))
Thanks in advance,
j-paul gabrielli
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>============================================
Don Nelson
Senior Systems Architect
Forte Software, Inc.
Denver, CO
Phone: 303-265-7709
Corporate voice mail: 510-986-3810
aka: [email protected]
============================================
"Nothing spoils fun like finding out it builds character." - Calvin
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Webfont not displaying properly in design mode or appearing in font list
Just updated Muse and now my heading webfont (Nunito) is not displaying properly in design mode or appearing in the font list. It is, however, displaying properly in preview mode. When I try and delete the font and then add it again I get an error message that says the font can't be added. Any idea what's going on?
Hello,
Please try the steps below. Hopefully this will fix the problem.
1. Close Muse
2. Rename the folders named tk1 and tk2 in the following locations
On Windows: %appdata%\com.adobe.AdobeMuseCC.2014.2\Local Store. You can type this in the Path bar at the top of the Windows Explorer window
On Mac: ~/Library/Preferences/com.adobe.AdobeMuseCC.2014.2/Local Store. You can type this in the Go To Folder dialog (Shift+Command+G)
3. Launch Muse and add the font again
Please let me know if that helps.
Regards
Vivek -
Standby Mode - Does it work on Late 2012 MacBook Pro (non-Retina)
I have read many articles today and I remain a little confused. I have seen the Apple discussion at http://support.apple.com/kb/HT4392 regarding "Standby Mode", but I appear to have limited progress.
Can the community verify if "Standby Mode" (controlled by pmset) be used on a late 2012 MacBook Pro. This is a model without the Retina display, however, when I do pmset -g... I do see standby in the display (as seen below) which implies it should be active.
When I look at pmset -g I do see the standby line item, but if I set to "1", the unit still appears to not want to enter true hibernation. I have hibernationmode set to 3 so that true hibernation only enables after the standbydelay period that is defined. Obviously, if I set hibernationmode to 25, a true hibernate starts immediately, but I don't really want that, I am looking for the delay function that standby enables.
I have reset the SMC and currently have the following pmset conditions (modified for testing)
Battery Power:
lidwake 1
autopoweroff 1
autopoweroffdelay 14400
standbydelay 60
standby 1
ttyskeepawake 1
hibernatemode 3
hibernatefile /var/vm/sleepimage
displaysleep 1
sleep 2
acwake 0
halfdim 1
sms 1
lessbright 1
disksleep 10
AC Power:
lidwake 1
autopoweroff 1
autopoweroffdelay 14400
standbydelay 1800
standby 1
ttyskeepawake 1
hibernatemode 3
hibernatefile /var/vm/sleepimage
womp 0
displaysleep 10
networkoversleep 0
sleep 60
acwake 0
halfdim 1
sms 1
disksleep 10
Also, an auxilary question. Can anyone explain the autopoweroff and autopoweroffdelay settings? They appear to undocumented in manpages and can not locate any info on the web.Thanks for the input Michael.
The thing that started this, is the new Late 2012 MacBook Pro simply uses much more power in "sleep" mode than what I experienced on my old Late 2007 White MacBook. Every night, the "sleep" mode would result in almost a drain of the battery and the result is that I was unneccessary cycling the battery. With no OS revisions to address this, I have changed the defaults to enable hibernate for both the charging and battery mode.
The strange thing about this is that even to get a true hibernation in battery mode I have to unplug all USB devices or the device will not hybernate. Again, never had to do this on the old White MacBook and the power usage at night was very small.
This works for now, but I think a device should sleep with very little (less than 4%) power loss when power is disabled.
Thanks again for the input. Here are the current settings.
Battery Power:
lidwake 1
autopoweroff 1
autopoweroffdelay 14400
standbydelay 1800
standby 1
ttyskeepawake 1
hibernatemode 3
hibernatefile /var/vm/sleepimage
displaysleep 1
sleep 10
acwake 0
halfdim 1
sms 1
lessbright 1
disksleep 5
AC Power:
lidwake 1
autopoweroff 1
autopoweroffdelay 14400
standbydelay 1800
standby 1
ttyskeepawake 1
hibernatemode 3
hibernatefile /var/vm/sleepimage
womp 1
displaysleep 10
networkoversleep 0
sleep 60
acwake 0
halfdim 1
sms 1
disksleep 5
Maybe you are looking for
-
Brand new ipod touch without january upgrade features included?!
I just bought my ipod sunday, it has john lennon on the box, model #A1213. I dont recall what firmware it came with but I updated it to 1.1.4 as instructed by itunes summary page. Also I get an ad on start up of itunes to purchase the january upgrade
-
HT204382 I can't open a .wmv file with quicktime player. Shouldn't I be able to?
I can't open a .wmv file with quicktime player. Shouldn't I be able to?
-
Goods movement 107 to 101 is not allowed
Hello friends, I was trying to post GR for order using MIGO_GO with movement type 101, but system is not allowing to change default 107 movement type to 101. However,on other hand system is allowing to post it through MB31. Please help. Thanks in adv
-
Problem opening .doc files in pages/.xls files in numbers...
My hard drive recently failed and has been replaced. Since the new hard drive was installed, I am unable to open .doc files with pages or .xls files with numbers. I never had this problem before.
-
premiere elements 10 downloads but will not open? info says to remove disc from desktop -- when i do that it closes the program?