Displaying more than 1 all-day event per day
I am going through the laborious process of entering data on my new iMac having previously shunned iCal on my MBP. All seems to be progressing well until...
In the first month I edited, 2 all-day events coincided and they displayed perfectly. However a few months later the same 2 all-day events coincided and, despite them being identical to the previous occurrence, only 1 event shows correctly and the second appears as 3 small dots. I have searched high and low for an answer with no luck. I have deleted them and re-entered in case there was an unseen error - same result. I cannot figure out why one day shows correctly and another not ? Any ideas or explanations ? Thanks, in advance.
I have several multiple entries on the same date and they all display in the calendar on the Iphone. This might be because I recorded these entries on the phone and not the computer.
Similar Messages
-
Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct." Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?
You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
The situation with iCloud and Snow Leopard is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html -
In month view, can't see more than 2 events per day...
I always keep my calendar in the "month" view because I have so much going on... But each day won't display more than two events. If I have more than two events, there's a "..." at the top of the day with two of the events underneath it. Each box for each day has so much space! I could fit like 5 other events! How can I display them all??
Is there a way to make things on the screen smaller? I've tried to use the touch screen taking my fingers and pulling together like you would zoom in and out but that doesn't work. This did not solve my problem. I hit the wrong button again. I have fat fingers.
-
How do I display more than one month calendar in the day-view?
iCal has always had a nice feature that allowed me to display little, what I call, mini-month calendars while in the day-view. This allowed me to quickly jump to a day two or three (or more) months ahead (or behind) to check appointments on that day or set an appointment, without switching out of the day-view.
The mini-month was a small clickable calendar that looked something like this:
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
There was also a forward and backward arrow box [ < ][ > ] that allowed me to quickly scroll to the mini-month to find the day I wanted to click into. And, if I wanted to give it more room by adjusting the frame, I could display up to three months at a time within my day view.
Since upgrading iCal to 5.0 with the Lion upgrade, I can no longer display more than the current mini-month calendar on the day view.
This is REALLY inconvenient. Now, there is no way (that I know of) for me to stay in the day view and be able to jump ahead to a specific day two or three months out, or even to a day in the NEXT month without either going to the year view (a big waste of time) or click on the last day of the current month and then clicking the ">" day arrow to get to the next day which then shows that month's mini-calendar.
How do I display more than the current month's mini-month calendar in the day view on Lion?Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.
-
Can SharePoint calendar show more than 3 items on a Day's schedule in Month view? How?
Hi there,
Can SharePoint calendar show more than 3 items on a Day's schedule in Month view? How?
Thank you so much.Hi,
From your description, my understanding is that you want to expand all items if a Day’s schedule has more than 3 items.
You could accomplish your requirement with jQuery to auto expand all items when you load month view, please refer to this article:
Auto Expand Month View on SharePoint 2013 Calendar
http://blog.eastridge.net/auto-expand-month-view-on-sharepoint-2013-calendar
If I misunderstand your requirement, please provide more detailed information.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I am handling logistics department in a company, i am handling more than 100 calls in a day. But my iPhone 4 have only 100 number call history. How to increase my call log size or kindly suggest a better app for storing 1 month call history..
Here's one:
https://itunes.apple.com/us/app/callog/id327883585?mt=8 -
TS3999 ical keeps deleting all my events the day before the event!
My ical keep deleting all my events the day defore the event and or on the day of the event! Any one having this problem or know how to fix it? thanks
Give this a try
http://qgf.in/11Bc6Z -
Permit more than one document type per series
Hi folks,
Please let me know what is the precise use of :
"permit more than one document type per series"
Cheers...
JituHi
Certain country regulations permit document numbering series that contain more than one document type.
All of these documents are part of the same numbering series.
Select this option if these regulations are relevant for the company.
This setting determines the settings that are displayed in certain Document Numbering windows,
and cannot be changed after it has been selected. -
How do I display more than one region as a modal popup?
Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
{$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.Magali wrote:
Hello all!
I have a popup that displays a report region. I now want it to display more than one region, say a report region and another report region underneath it.
Here's the code that I currently have (and this one can popup one region):
$.fx.speeds._default = 1000;
$( function(){
$('#ModalForm').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
function openForm(pFoodTemplateId, pMealTypeId)
var getone = new htmldb_Get('shiny',&APP_ID.,"APPLICATION_PROCESS=DUMMY", &APP_PAGE_ID.); // initialize get
getone.add('P24_TEMPLATEID', pFoodTemplateId);
getone.add('P24_MEALID', pMealTypeId);
gReturn = getone.get();
getone = null;
$('#ModalForm').dialog('open');
function closeForm()
{$('#ModalForm').dialog('close');}
$(document).ready(function()
{$('a.temppop').click(function() {openForm();});
});The class of the button (or in my case, the link in another region that's not displayed as a popup) is temppop.
QUESTION:_
How do I edit my existing code, so that it can now display another region?
The ID of the region it displays now is ModalPopup. I would like to add another region, with another ID off course. Pick any ID, as long as you can explain to me how.First build your dialog for new ID (please replace NEWREGIONID with your region static id)
$( function(){
$('#NEWREGIONID').dialog(
modal: true,
autoOpen: false,
width: 650,
height: 450,
buttons:{ Calculate: function(){calculateTotal();},
Close: function(){closeForm();}
And now you could open or close the dialog
$('#NEWREGIONID').dialog('open'); -
How to display more than 10 rows in an Auto Updating Report
I followed Carl Backstorm's example, http://htmldb.oracle.com/pls/otn/f?p=11933:40:525653462286833::NO:RP:: to create a page with an auto update report/region. It's working fine (thanks, Carl) but I can't have the report display all rows (38 rows in total). Everytime I press the "Manual Refresh" button, it shows 10 (the first 10) rows only.
When the report displays at the first time, it shows all the rows (38 rows). Number of Rows and Maximum Row Count are set to 999999 and "No Pagination Selected" in the report region. But after I press the "Manual Refresh" button or specifiy an update time value (like 1 second) to have it auto update, then it only display the first 10 rows.
Is there a way to display more than 10 rows in an Auto Updating Report using Carl's example auto update report/page? Anyone can help? Thank you.
-Michele
Edited by: 106451 on Jun 30, 2010 10:12 AMYes, I changed it to:
function table_object(pId){
this.id = pId;
this.start_record = 1; //optional
this.num_record = 50; //optional
this.num_record2 = 50; //optional
I don't quite understand how these vaiables are used for though. Thanks. -
How to display more than 255 chars in background job with ALV Grid ????
Hi All,
I am using ALV grid with OO.
I have used call screen for ALV grid display. I have to display more than 255 characters in width. While running it, I can see the list perfectly.
But in background mode, the list is truncated after 255 chars.
Can anybody help how to send complete list(width more than 255 chars) to spool.
Thanks and Regards,
NehaHi SAP fan,
<b>YES you can run the ALV report in background mode.
To run the report in background do F9 instead of F8, then give immediate and save.
Now goto Sm35 goto job overview and view the job listed
Choose the job and press the spool button. It will show the list created on the next page. When u clcik the list u can see the ALV output.
To see this the job should be in the finished status.
How to define Periodic Jobs
1.Execute transaction SM36
2.Define Job name, Job class, Target server
3.Click on 'START CONDITION' button
4.Click on 'Date/Time' button
5.Enter Scheduled start DATE & TIME. Check mark 'Periodic Job' field. Click on 'Period values' button and select 'Hourly' or 'Dialy' or 'Weekly' or 'Monthly' or Other period and SAVE. Go back to main screen.
6.Click on 'STEPS' button and enter Program name and Variant under box 'ABAP Program'. Click on 'Print Specification' button and enter Printer name under 'Output device' and SAVE
7.Click on SAVE button until you get message on bottom of the screen that describes 'Job XYZ saved with status: Scheduled'.
8.Click on 'Job overview' button or execute SM37 transaction.
9.Select the appropriate 'Job name', 'User name', 'Job Status' & Schedule date under 'Job start condition' and click on 'Execute' button or press F8.
10.You will now see all your scheduled JOBS.
<b>Case: 2</b>
You can Run in Background but make sure it is alv list, not alv Grid FM. if you are uisng alv list not problem , but if you are using alv grid then you can code like this..
if sy-batch = ' '.
call 'REUSE_ALV_GRID_DISPLAY'.
else.
call 'REUSE_ALV_LIST_DISPLAY'.
endif.
if you are using OO alv then write this code..
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING e_offline = off.
IF off IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
ENDIF.
<b>Case: 3</b>
if you are using OO ALV.
Just before creating the custom container check for the following condition.
Batch or Web Reporting
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
CREATE OBJECT o_custcontainer
EXPORTING
container_name = lc_custcontrol
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
ENDIF.
You can see the output in Spool in transaction SP01.</b>
Good Luck and thanks
AK -
How to display more than 132 characters in a smartform
Hi Experts,
I am reading notes/text entries by calling read_text and then passing them in a variable. I want to display the notes. But even after declaring the variable as LINE2048, it is displaying only 255characters as output length in smartform.
My code:
TYPES: BEGIN OF TYP_FINAL,
PARTNER_NO TYPE BU_PARTNER, "Partner No.
OBJECT_ID TYPE CRMT_OBJECT_ID_DB, "Object ID
PROCESS_TYPE TYPE CRMT_PROCESS_TYPE, "Activity Type
ACTUAL_NOTE TYPE LINE2048, "Actual Notes
END OF TYP_FINAL.
data : T_FINAL TYPE STANDARD TABLE OF TYP_FINAL,
WA_FINAL TYPE TYP_FINAL.
data: v_actualnote TYPE LINE2048.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = C_0002
LANGUAGE = sy-langu
NAME = l_name1
OBJECT = C_BUT000
TABLES
LINES = t_line
EXCEPTIONS
ID = 1
LANGUAGE = 2
IF SY-SUBRC = 0.
clear: v_accountnote.
LOOP AT T_LINE INTO WA_LINE.
CONCATENATE v_accountnote wa_line INTO v_accountnote SEPARATED BY space.
clear: wa_line.
ENDLOOP.
wa_final-account_note = v_accountnote.
clear: v_accountnote.
ENDIF.
On the smartformm side, under main window->loop->text(to display the variables).
How to display more than 255 characters in a smartform.
Regards,
Sangeeta.why the heck would you use read_text when you want to print a text/note on a form?
in SAP-Script we use the "INCLUDE"-Statement for this.
and in smartforms a Text-node of type 'I'.
you can not write all in one line and expect the system to handle this like a floating text.
one character takes a cretain amount of space (varying for different characters and font and font sizes).
you Page has a certain width, so where is the miracle in the thesis that on a sheet of paper with a certain width just a certain amount of characters will fit? -
How to display more than 200 rows in the table?
Hi Experts,
Is that possible to display more than 200 rows in a Table.
when i query from table, it has 1000 rows, i want to display all the 1000 rows in the Table.
when i query, the values are displaying up to 201 rows only,
when i click next on 200 - 201 it throws Exception says
*"Query has exceeded 200 rows. Potentially more rows exist, please restrict your query."*
let me know how to display all the 1000 rows in a table without Exception.
Any idea will be highly appreciated.
Thanks
AswathThe number of rows retrieved is controlled by profile option "FND: View Object Max Fetch Size". I believe 200 is the default value. Pl see these MOS Docs
386402.1- Query Has Exceeded 200 Rows
275876.1 - Oracle Application Framework Profile Options Release 11i (11.5.10)
HTH
Srini -
Want to display more than 300 charcters in a column using ALV grid display
Hi Guru's,
I am trying to display more than 500 charcters in a column using alv grid display but it in the output it is showing only 128 characters. Can you help me to display all the characters in particular column Or is there any limitation in maximum of no of charcters for a column?
Thanks,
Radha.Hi Paurl,
Define a work area say
wa_layout type slis_layout_alv.
then fill this work area as
wa_layout-zebra = X
wa_layout-colwidth_optimize = X.
wa_layout-max_linesize = 300.
Then in FM 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = wa_layout
etc.
you provided this for the field which is displayed in alv grid will have more than 128 characters.
from this code i want,how it refers to particular field.
when i mentioned field catalog-OUTPUTLEN = '300'.
it is not displayed the field morethan 128 characters.
it only displays 128 characters.
please provide me clear and breif information with suitable code.
i am trying what your sending but it is not displayed more than 128 characters.
if you don't mind please spend for me some time for this and
give me clear and breif information with suitable code.
Thanks & Regards,
Radhakrishna. -
Display more than 1023 Columns in alv
can we display more than 1023 columns in alv. please provide inputs on any approach that can be followed to achieve this.
Thanks.Hi,
just for the record. Here's the code to create a table with 10000 columns, in this example all of type vendor. It could be modified a little to create any dynamic table. Without any visible limits and can be displayed in SALV.
DATA:
lv_lifnr TYPE lifnr,
lv_numc7 TYPE numc7,
lt_components TYPE cl_abap_structdescr=>component_table,
lo_struc_descr TYPE REF TO cl_abap_structdescr,
lo_tdescr TYPE REF TO cl_abap_tabledescr,
lr_tab TYPE REF TO data.
FIELD-SYMBOLS:
<component> TYPE LINE OF abap_component_tab,
<range_tab> TYPE STANDARD TABLE,
<tab> TYPE table.
* build dynamic table
DO 10000 TIMES.
APPEND INITIAL LINE TO lt_components ASSIGNING <component>.
<component>-type ?= cl_abap_datadescr=>describe_by_data( lv_lifnr ).
lv_numc7 = sy-index.
CONCATENATE 'FIELD' lv_numc7 INTO <component>-name.
ENDDO.
lo_struc_descr ?= cl_abap_structdescr=>create( lt_components ).
lo_tdescr = cl_abap_tabledescr=>create( lo_struc_descr ).
CREATE DATA lr_tab TYPE HANDLE lo_tdescr.
ASSIGN lr_tab->* TO <tab>.
APPEND INITIAL LINE TO <tab>.
I discovered that it takes some time (15 seconds or more) to create, even F1 and F4 in the SALV table use considerable time to pop up, I think (SAP never imagined
But it works - and the code is so simple!
Kind regards,
Clemens
Maybe you are looking for
-
In LR5 i do: Merge to HDR Pro. After I apply my preset and PS attempts to convert HDR file, I get an error message from PS: "Adobe Photoshop CC 2014 has stopped working". Then PS Closes. My source files are 5 NEF files of 28 MB. I select 16-bit, I al
-
Itunes freezes in windows vista
i have a 32 bit os which i've read is not a problem. can anyone help me? itunes will maybe allow me to copy maybe one track onto ipod, then will not only freeze but i can't close or anything. plz help.
-
EDI1 and EDI2 Conditions Problem in Purchase order
Hi All, While updating the price from vendor via EDI, condition EDI1 and EDI2 is notgetting updated for some items. Could you please explain what can be the possible reasons & how this can be solved. BR Mushtaq
-
Why do the iPod headphones not have a pause button? Ridiculous.
Doesn't this diminish functionality for the sake of marginal profit for Apple?
-
IOS 8 updated, now my group texts are green!
Can someone please help me. I have updated to the new iOS 8 and now it seems that a few of my most used group texts are now green and not blue any more. Is there something in the settings that I might need to change