Displaying Name of Ipod

I would like to display the name of my Ipod when it is first turned on.
How do I do this?
Thanks,
Sandy
Windows XP

You can't. The only place on the iPod where the user name is displayed in the settings/about menu.

Similar Messages

HT3051 can you change your Change Your Displayed Name if you have multiple devices attached with the same apple id?

We have both a Iphone 4s and a 4th Generation Ipod Touch both with the latest available IOS software on them. Since the Ipod touch was given to a preteen for Christmas and they aren't old enough to have their own email account or apple id 11 years old going on 12, is it possible to have a different displayed name for each device if they are both signed in with the same apple ID and not interfere with each others device in doing so?

@pdroth. Displayed name as in when you sign up for a apple id you sign up with email and a screen name(this is your display name). If you are using any apple device as like you do with an android device you have to sign in with either your google acct for android or apple id for a apple product. If one apple product is utilizing that apple id already aka Iphone and you can't set up a account for your child because of his or her age because of age restrictions, both devices will use the same info. So for instance when using things like facetime instead of seeing jane doe calling jane doe(basically making it show name of other person using your account instead of seeing your own name) can you make on jane doe and one john doe using the same apple id just different outgoing display name. Hopefully this helps.

IPod won't sync - "Itunes could not copy (name of song) to the ipod (name of ipod) Because an unknown error occurred (-53)"

I recently bought a used iPod Classic (my previous one was stolen). I still had my iTunes library on my computer so I was just going to hook it up and sync my library over, replacing what was on there from the previous user. When I first hooked it up to my computer (Windows 7 64-bit) there was a message saying the drivers were not installed properly. I un-plugged it, and plugged it back in to the same result. I tried 1 more time and didn't get the error message. I then opened iTunes and clicked on the iPod. I checked for updates, then clicked "Restore this iPod". Next, I set it up to sync music, and the sync began. It seemed to work for a while, the "Syncing iPod" message was displayed at the top, and it said it was copying songs over. It did this for about 10 minutes before I finally got the following message:
"Itunes could not copy (name of song) to the ipod (name of ipod) Because an unknown error occurred (-53)"
After that happens, everything seems to freeze up. iTunes says it's still syncing, but nothing ever seems to happen. If I click the eject button, nothing happens either. I eventually have to just disconnect the iPod. The iPod seems frozen for a while, then it seems to reboot itself (the gray apple window displays), then the interface displays and I can get to the songs on there. But, only a very small portion of my library makes it to the iPod. I've tried several times now and it always seems to be the same songs that DO make it onto the iPod. However, it's a different song listed in the error message each time, so it doesn't seem to be just 1 song causing the problem. Also, once I hook the iPod back to the computer, Windows displays a message prompting me to scan the drive and fix errors. I did it once and it said it found some errors and fixed them.
I saw this thread: https://discussions.apple.com/thread/3924425
and some people were suggesting removing everything from your library then re-adding it, in case the paths were messed up. I tried that and still got the same results. I also updated iTunes to the latest version, and I've tried different USB ports and 2 different USB cables.
I also found instructions for a batch file you can run that, I believe, updates the iTuens DLLs, I did that as well but it did not help: http://support.apple.com/kb/TS1539
What else can I try to fix this?

bump (if that's allowed)

How to change display name in iMessage?

My son has an iPod that's using iMessage to text. When he text to my phone, it has my name as the display name and not his. How can I change this so it can display his name instead of mine?
I am using my iCloud account on this iPod, not sure if it has anything to do with it.

Very easy
Do you mean you want their name to display when you ipad imessages your iphone?
2 ways to do it
You can either add another contact and call it iPad Message for instance and just add your iMessage email in there.
Or
If its another persons phone they simply need to add the same email address into your contact on their phone.
I dont think its possible to not display your email address mind you if you are not already added at all in their contacts, i.e if you're imessaging an aquantaince and not a close friend via iMessage.
iMessage i designed for more personal use between friends and family unless you dont mind sharing your email address.
Why not just add another email address in iMessage to use if you're worried?

Display Names - Internationalization

I'd like to internationalize the name displayed under my app icon on the iPhone but can't seem to make it work.
In Xcode, I got Info on Info.plist, clicked "Make File Localizable", then clicked "Add Localization" (German), clicked on the subsequent new file, changed "Bundle display name" to its German equivalent, saved it, and thought I was done. But, when I change languages on the Simulator and on my dev iPod Touch, the display name never changes (as do the other Apple application names).
So, I guess I'm missing something. Any direction would be appreciated.

Hello Donnie,
I have done this in 3 Apps, believe me, Xcode does NOT do this for you :
1/Add a strings file to your project (File / New File... / choose the "strings" template under "Other"/)
name it InfoPlist(.strings)
2/ Make it localizable, add the German Localization
write the following line into the English one :
CFBundleDisplayName = "App's name in English";
and this one in the German one :
CFBundleDisplayName = "App's name in German";
3/ In your app's Info.plist, make sure you've selected "Application has localized Display Name" instead of the default "Bundle Display Name", and that it is -of course - checked...
If (and that was unclear to me) your localizable strings and localized xibs (if any) are in en.lproj and de.lproj, you need to move them in the English.lproj anf German.lproj folders (via the finder) and then add them to your project via Xcode, in these same folders (moving them is not enough...)
(it's best to have quit Xcode while moving these files)
Then, CLEAN ALL TARGETS, and build...
Hope this helps
Message was edited by: Ostrowsky S

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to change web-app display name within EAR file?

Currently we are deploying an EAR file (which contains a web-app and an EJB) per
BEA recommendations. The web-app shows up on the admin console with '/' as the
name. Is there anyway to change this to the name I want?
thx,
Matt

FYI - here is the entire content of applicaiton.xml in the EAR file we deploy:
<!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EE Application
1.3//EN' 'http://java.sun.com/dtd/application_1_3.dtd'>
<application>
<display-name>RVApp</display-name>
<module>
<ejb>RVTrackingBean</ejb>
</module>
<module>
<web>
<web-uri>RVWebApp</web-uri>
<context-root>/</context-root>
</web>
</module>
</application>
"Erik Johnson" <[email protected]> wrote:
>
No, you can't change that in the console. It's defined in the application's
application.xml
descriptor file.
erik
"Matt Savino" <[email protected]> wrote:
Currently we are deploying an EAR file (which contains a web-app and
an EJB) per
BEA recommendations. The web-app shows up on the admin console with'/'
as the
name. Is there anyway to change this to the name I want?
thx,
Matt

Exchange Online Management cmdlets return Display Name instead of Identity

Hello,
We've got an issue when managing our Exchange Online environment using remote PowerShell.
We use Exchange management cmdlets to manage Exchange Online mailboxes. When we run, for example, the
Get-MailboxPermission or Get-RecipientPermission
cmdlets, it returns Display Names of the users with mailbox rights. Previously, when we initially tested remote PowerShell with Exchange Online, the cmdlets returned the
Identity property, which is unique and worked well for us. However, currently the cmdlets return the
Display Name, which is not unique and causes us issues. For example, in our environment there can exist two or more users with the same Display Name (see highlighted on the screenshot):
In cases when only one of the users is granted a permission, we cannot distinguish programmatically, which of the 2 users this is. Also, we cannot run cmdlets, such as
Get-SecurityPrincipal, to get more info about the principals who are granted the permission.
Is it possible to get the old behavior of the cmdlets back so that they return the unique
Identity instead of the non-unique Display Name? Or how do we workaround this?

Hello,
Can anyone update on this? The issue causes us HUGE problems :(

SMS Text Display name

If I go into options on my BB 8530 and into the SMS Text and change my display name and then save it keeps it for a short period of time. As soon as I do a reboot by the alt, caps, del keys it goes back to the first name I put in. Is there a service book that keeps that stored somewhere? How do I get it to keep the display name that I want? Thanks

sgesualdi wrote:
Any suggestions on what to do? Is there a service book that maybe can be replaced? I see a WapPushConfig (SMS). Will deleting that maybe fix it or will that cause more issues? Thanks for the help.
Well, quite honestly, the SMS is not enabled by service book... BUT, there is no harm in deleting that one and resending it.
Delete that SB entry.
Reboot (powered on battery pull)
Resend Service Books.
Check it is reinstalled, if not do another reboot.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

In portal 9i, removal of folder display name link

hi all,
i need to know, how to make the folder display name not a link.
by default display name comes as a link, which points to the particular content area , the folder uses.
--archana

Hi Samer_asn,
I am trying to do exactly what you did.
Can you tell me how you could retrieve the word doc from blob and show it in a portlet when a user clicks on a link
Thanks in advance
Jay

SharePoint 2010 Web Analytics showing user Display Name and Account Name from the same user

Hi!
Since July, 16th 2012 the Web Analytics Daily Unique Visitors reports started to show almost the double of visitors we used to have on our Web Application. Here are some of the data (I intentionally deleted the weekend data):
10/7/2012 2.497
11/7/2012 2.723
12/7/2012 2.722
13/7/2012 2.699
16/7/2012 5.055
17/7/2012 4.963
18/7/2012 4.954
19/7/2012 4.998
20/7/2012 4.965
23/7/2012 5.117
24/7/2012 5.012
25/7/2012 5.071
As you may notice the data jumped from around 2.700 unique visitors to around 5.000 unique visitors. As the number of permissioned users remains constant it is pretty odd. I also checked the Number of Page Views report and see no change on its behavior.
The number of page views remained constant.
So I went to look the Top Visitors report and understand why the visitors number almost doubled. The analytics started to count the users Display Name and Account name as two different visitors with a different number of page views. Let me show you an example
from yesterday (July, 25th) Top Visitors report:
#    Visitor                  Page Views   %
1   Cinthia XXXXXXXXXX    359      0,55%
5   Giselle XXXXXXXXXX     143        0,22%
7    Aline XXXXXXXXXX       138        0,21%
15 nt\cmazevedo              111        0,17%
60 nt\gbsantana                 69        0,11%
73 nt\aglsiqueira                 65      0,10%
"Cinthia" and the account "nt\cmazevedo" are the same person. The same is applied to "Giselle" / "nt\gbsantana" and "Aline" / "nt\aglsiqueira".
As I stated this is an example from July, 25th. If I checked the same report from a period before July, 16th I can only see the users Display Name as "Visitors". No account name is displayed or counted as a different visitor.
About the environment:
We have two SharePoint 2010 farms: a "corporate" and a "enterprise". The corporate farm contains four web servers and a central administration servers with publishing services. The enterprise farm contains two servers running User Profile Services, Search
Services and some others. Our main version is the SP1 with June/2011 Cumulative Update with a few more hotfixes applied.
This behavior on analytics is affecting all web applications (we have more than 20) installed on this farm and my company Support team said that no change were made on SharePoint on the weekend the problem started.
Does anyone have any tip about what is going on?
Thanks in advance!

Hi, Manas!
First of all thanks for your interest on this issue but I don't think it is related to the User Profile or the Active Directory.
I checked both records and there was no change on the Display Names. All the users have "full names" as display names (first + middle + last name) and not logins as SharePoint is displaying on this report.
But I did a test yesterday and checked the results today confirming that just the access been made using a specific server are causing this. Explaining it better:
I have four web servers on my farm named from P01 to P04. Then I created this test script:
Step 1: Change local HOSTS file to point the web application on the server P01.
Step 2: Access site "A"
Step 3: Access site "B"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P02.
Step 2: Access site "C"
Step 3: Access site "D"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P03.
Step 2: Access site "E"
Step 3: Access site "F"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P04.
Step 2: Access site "G"
Step 3: Access site "H"
Step 4: Close the browser.
I asked three users to execute that script. The results: All access to the sites "C" and "D" were registered on Web Analytics with the user account name such as "nt\cmazevedo". All the other sites registered the user Display Name correctly such as "Cinthia
XXXXXXXXXX".
With this test we could isolate the problem just on the server P02. It doesn't occur on the others. Now my support team is trying to find any configuration difference between this server and the other three that could point for the root cause.
I am also looking for some information regarding the service responsible for this task ("transform the account name into a display name") to understand why it doesn't work on one server and works on the others.
Thanks!

The display on my iPod is extra large and I am have no idea why. I tried the HOME button and the power button at the same time but that doesn't work. I can't even enter my code to unlock it because I cannot scroll the HUGE display! Any ideas??

The display on my iPod Touch is HUGE and I have no idea why. I tried the HOME button and power button at the same time.....no help. I cannot enter my unlock code because I can't scroll without entering a wrong number! HELP!!

Using three fingers, double-tap the screen.
http://support.apple.com/kb/TS3129

Project Server 2010 - Updated User Profile - Display Name is Old Name

Similar to question"It shows the Domain\Logon account instead the User Name (up right corner)" but not quite the same. I also checked on the related topics list and could not find a solution.
We have a Resource in Project Server 2010 whose name changed. This included a change to her loginID as well as her email address. I went in to PWA > Server Settings > Security > Manage Users and changed the
Name, Email Address, and User Login Account fields accordingly. When the user goes into Project Server or any of the Project Sites, her old User Name is reflected. If she accesses any other SharePoint site (not associated with Project Server) her
new name shows up in the upper right hand corner of the screen.
We do not have AD Synchronization turned on.
How can we edit the name that appears in the upper right corner of the screen?

Hi,
Use Display name shown on right hand site is not from PWA, its from SharePoint User profile. When we make change to user display name, sometime SharePoint Still retain the old account and also add new account. To fix the issue we have to remove the user
profile from PWA root site.
Open PWA and navigate to following path
Site Actions>>Site Settings>>People and Groups
Click on More from left hand site list of groups
Select appropriate group, belongs to the user
Select the user and from Actions tab remove the user. (you may see two entries old and new), Either you can delete both or click on each account to validate correct user ID.
Once again navigate to PWA>>Server Settings>>Manage User
Edit affected user and click on Save
Have user log on to PWA and validate the result.
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you.This can be beneficial to other community members reading the thread.

Display name not getting generated When creating user thorugh GTC

We are using GTC flat file as a trusted source. We see that display name not getting generated. And same thing happening when creating a new GTC mapping.
previously when we ran with few test user got created with display name through GTC flat file , Suddenly we see this issue display name not getting generated through flat file recon.
Manually user creation has no issues.
Please let me know if you have any idea about this issue.

Don't use GTC... GTC is inflexible and buggy technology... Nothing guaranteed... Rather create your own custom trusted recon code...
For more details
26 Known Issues of Generic Technology Connectors
http://docs.oracle.com/cd/E10391_01/doc.910/e10360/issues.htm

How can I customise Thunderbird message columns to show sender raw address (not display name) and the "Received for" email address that was used to reach me?

I find it increasingly important to be able to see a sender's actual email address rather than just display name, as they usually don't show a company name - which a domain always would. Is there a way to customise settings/write a script/tweak files to add raw email & domain name columns? When dealing with a number of people at the same company it is hard to order or glance through a list of emails to find them. I also know 2 people with the same name at different companies and it is impossible to distinguish!
Secondly, as a related column addition, since a number of email aliases reach me it would be useful to have a column to show the "Received..for" part of the message source which reveals the actual email used in the To/CC/BCC which led to me. Again can this be tweaked or scripted?
I have programming experience but have not made add-ons and would be open to a suggestion which involves creating a custom add-on if adding columns with custom values is possible that way.
Best Regards,
Drew

Extended message headers can be searched from Edit/Find/Search Messages, or the folder context menu, by adding custom headers to the search criteria. So, you might be able to create a search on specific properties of a message.
The method of adding custom headers to searches is the same as the one described here for filters:
http://kb.mozillazine.org/Filters_(Thunderbird)#Custom_headers

Displaying Name of Ipod

Similar Messages

Maybe you are looking for