Displaying number in text

Hi, I want to display the number (ex:99) as ninety nine on screen,
Thanks in advance.
Prakash

Hi,
Have a look on below link.
Re: NUMBER TO WORDS CONVERSION
Regards

Similar Messages

CVP Opsconsole: Patterns for RNA timeout on outbound SIP calls - Dialed Number (DN) text box does not take any input

Hi there,
I'm having problems modifying the 'Dialed Number (DN)' text box under 'Advanced Configuration->Patterns for RNA timeout on outbound SIP calls' of the SIP tab in the Cisco Unified Customer Voice Portal 8.5(1) opsconsole. In a nut shell, I need to change the RNA timeout but some reason when typing into the Dialed Number text box, the input is not taken. The reason I want to change this settings is because my ICM Rona is not working with CVP:
https://supportforums.cisco.com/thread/2031366
Thanks in advance for any help.
Carlos A Trivino
[email protected]

Hello Dale,
CVP doesn't allow you to exceed the RNA more than 60 Seconds. If you want to configure the timer for DN Patterns you should do it via OPS console, It would update the sip.properties files in correct way, the above way is incorrect.
Regards,
Senthil

How to get data from list of values (LOV) to be displayed in a text field ?

Hi guys,
I am very new to Oracle APEX so please spare me if it is a silly question. How can I get the selected values from a set of list of values (LOV) displayed in a text field (or text area or so) ? Fox example, in my form I create 4 items: STATE, COUNTY, STREET, ZIPCODE and all of them are LOV (list of values). I also create 2 buttons (ADD & REMOVE). Then I create a test field (or text area name SELECTED RECORD). Now here is what I want to do with my form:
When I set the values for all 4 fields, I will click on the ADD button then I want those values be displayed in the text field.
For example, if the selected values are:
STATE = Alabama
COUNTY = Abbeville
STREET= 1 Street
ZIPCODE = 36310
And the ADD button is pressed. Then in the text field I want it displays like this:
Alabama,Abbeville,1 Street,36310
If I choose other values and click ADD again, a new line will be added into the text fields (text area). If I click the REMOVE button, then it will clear those two line in the text field.
Would it be possible to do it? Any help will be greatly appreciated. Thanks in advance.

If you can live with the page being submitted and refreshed, make your ADD button do a submit with a request value of ADD and make your REMOVE button do a submit with a request value of REMOVE.
Then create two computations (one firing with a condition of Request = ADD and the other firing with a condition of Request = REMOVE).
In the ADD one, concatenate the values together into the text area (most likely a PL/SQL computation wiill be what you want). In the REMOVE one, set it to null with a PL/SQL computation.
If you want it done without submitting the page, make the buttons each do a redirect to a URL but instead you will have to write two short javascript functions in the page HTML header to manipulate the field values. Each button would call each javascript function in an onclick event.

Smartforms,How to display different standard Text in a Text element.

In smartform,if I want to according to the different conditions,display one of the serveral different standard Text objects which all maintained in SO10 in a same text element,how to do it?
if i put them in serval text elements, each condition only display the corresponding text element,but the text content can not display in the same position.
Is there anyone can tell me?
thanks.

use Alternative to control it no problem
for example you want to display the different SO10 to same position TEMPLATE's row 1 col2
TEMPLATE1
Alternative case1
YES
INCLUDE TEXT1(display SO10) [set output option line1 column2]
NO
Alternative case2
YES
INCLUDE TEXT2(display SO10) [set output option line1 column2]
NO
Alternative case3
every case your SO10's text is always display at line2 column2
just try to test it ,you can know

Is there an APP to monitor call usage and number of texts sent

Is there an APP to monitor call usage (in minutes) and number of texts sent etc so I can ensure I am keeping within my contract? I am getting my 3GS on Thursday so do not know if the phone has this facility already inbuilt or whether there is an app I can buy to do this for me?
Thank you for any help and info to answer my question.

Unless O2 has an app available via the iTunes app store that provides for this as AT&T does for the iPhone sold in the U.S., I don't believe so.
The iPhone includes a usage indicator for Call Time and Cellular Network Data usage, which can be reset on a monthly basis based on your billing cycle, but there is no usage indicator for the number of messages sent or received.

How to display multple line text in a single cell in ALV?

Hi all,
I have 'Material Detailed Description' field in my ALV report, and it's taken from a multiple line text table. Is there any way so I can get this whole text to fit in a single ALV cell (not in single, but multiple line, as in original text data)?
Thank you.

Hi
If you want you can display this long text field in ALV but the allignment of the ALV not looks good. so generally we won't display them in the output,
instead, in the interactive list write the code to call that MM03 transaction, and the user can see that text in the transaction when ever double clicked on that MATERIAL field.
Reward points for useful Answers
Regards
Anji

How Do I Display HTML Formatted Text From A Data Table In Crystal Reports?

I'm creating reports in Crystal XI. The information being displayed in the reports comes from data tables where the text is formatted in HTML.
I've worked with Crystal Reports enough to know that HTML text pulled from a data table doesn't appear in Crystal the same way it does in a web browser. Crystal Reports ignores all the tags (...unless I'm missing something...) and just displays the text.
Someone far more Crystal savy than I (...who I don't have access to...) came up with a Formula Field workaround that tricks Crystal Reports into displaying some basic HTML tags. Here's that workaround:

QUESTION - Does any similar workaround exist so I can display an HTML Table in Crystal Reports? If not, is there any way to display HTML formatted text from a data table in Crystal Reports as it would appear in a web browser?

Hi Steven,
To display html text in Crystal Reports follows these steps.
1. Right click on the field and select Paragraph tab.
2. Under 'Text Interpretation' select 'HTML Text' and click OK.
I have tried using the way,but it never works.So reply me if there is any way to solve the issue

My iPhone 4s no longer displays photos or text in horizontal mode. Is there a reset option or a known way to have this functionality return?

My iPhone 4s no longer displays photos or text in horizontal mode. Is there a reset option or a known way to have this functionality return?

RRGarcia wrote:
My iPhone 4s no longer displays photos or text in horizontal mode. ...
It could be this... Orientation Lock
Settings > General > Lock Rotation..
Or...
Double-press the home button...
Swipe to the right until you get to the Portrait Orientation Button...

Display key and text by WAD command in custom structure hierarchy

Hi everybody,
I have a query using a custom structure with hierarchy layout. As usual the structure does only display its text as descriptions but I can enable the display the key in BEx Web by right-click on the analysis item --> Properties --> Characteristic --> Display. Unfortunately these setting can not be defined directly in the structure within the Query Designer.
For a workaround I put the query into a web template, in which I used the Set Presentation (SET_PRESENTATION) command to enable key and text display from the start. Hence I put that command in the wem template parameters Action Before First Rendering (ACTION_BEFORE_FIRST_RENDERING). Everything is working properly and makes me very happy.
But... there is one thing missing, I would like to implement... I want a toggle button, which allows the user to switch between key and text display and text display. Unfortunately setting the same command from Action Before First Rendering (ACTION_BEFORE_FIRST_RENDERING on a various button does not working. The button command only affects data rows of the leaves of the structure hierarchy. All parent nodes do not change their appearance.
Any ideas how to solve this?
Thank you for any helps and comments!
Sebastian

Hi Sebastian,
I have a similar problem. Can you help me? How did you set the entry in Member Presentation of Command SET_PRESENTATION to display key and text? I just found the values to set the only text or only key.
best regards,
Barbara

Display of long text message

Helllo Expert,
I want to display a long message, In module pool program . I have maintain the other message of the program in message class but the long message is not fitting into the message class. the message which I want to display is *"Data saved. Market group (&) and market super group (&) saved. Market (&), market (&) and market super group (&) saved" I have tried using text-xxx but it's not allowing after WITH only 4 field allowed.
Thanks .

You can use the function module
HELPSCREEN_NA_CREATE
to display the long text of the message!
Regards
Naren

Uploading a text file with unknown number of texts

Hi ,
i have a flat file with around 10,000 record's.
each material number followed by different lengths & unknown number of text's separated by delimiter '$',
that need to be saved using save_text function module.
the file is as follows,
record 1 :     material1$text1$text2$text3
record 2 :     material2$text1$text2$text3$text4$text5$text6$.....
record 3 :     material3$text1$text2$text3$text4$text5
record 4:      material3$text1
- - - - - - - - - - - - so on ....
i created the following structure , to split and save each text separated by '$' , to save in TLINE of save_text function module.
types : begin of ty_file,
              matnr type mara-matnr,
              text1 type string,
              text2 type string,
              text3 type string,
              text4 type string,
              text20 type string,
           end of ty_file.
i have uploaded the file and saved in table it_file type ty_file.
loop it_file into wa_file.
   split wa_file at '$' in to matnr text1 text2 text3 text4 ....... so on.
endloop.
please, suggest me an alternate way to reduce the code, instead of creating a structure like above, so that each splitted text
stores in a single variable and is passed to TLINE of corresponding material, in save_text function module
thanks
viki

Hi,
The flat file contains , material No. followed by it's text , each text sepearted by '$' symbol.
For each material i have to get all lines of text, and passed to tables paramter of save_text.
The Number of text' for each material is varying.
Please kindly suggest me , how many variables i need to create to hold each splitted text and store it in Tline
I wrote the below program assuming that the material number has maximum of 20 texts, it's working fine. But, what if the number of texts exceeds 20.
file :
4907507$ Druckrolle$ Durchmesser: 218 mm$ Länge: 750 mm$ Rollenwerkstoff: 1.4301/1.4541$ Oberfläche: gummiert$ Stärke Gummierung: 10 mm$ Näscher    E 71224$$$$$$$$$$$$$$
1149598$ Tragrolle$ mit Stützringen$ Norm: ähnlich DIN 22112$ Durchmesser: 89 mm$ Mantellänge: 800 mm$ Form der Achsenden: A2$ Achsdurchmesser: 25 mm$ Achsanflachung: SW 18$ Einlegelänge: 808 mm$ Achslänge: 834 mm$ Lagerbezeichnung: 6305$ Anzahl Stützringe Form A: 6$ Anzahl Stützringe Form B: 4$ Anordnung links: 4$ Anordnung mittig: 6$ Anordnung rechts: 4$ Qualität Stützringe: N$ Durchmesser Stützringe: 159 mm$ Anzahl Zwischenhülsen: 7$ Anzahl Schlussscheiben: 2$ Erbö   3111.800.05.68
file upload
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      static    = 'X'
    CHANGING
      file_name = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = gd_file
      FILETYPE            = 'ASC'
     HAS_FIELD_SEPARATOR = 'X'
     HAS_FIELD_SEPARATOR = '$'
    TABLES
      DATA_TAB            = It_data.
loop at it_data into wa_data.
    split wa_data-line at seperator into matnr_txt text1 text2 text3 text4 text5
                                               text6 text7 text8 text9 text10 text11
                                               text11 text12 text13 text14 text15
                                               text16 text17 text18 text19 text20.
    move matnr_txt to wa_material-matnr.
    move text1 to wa_material-text1.
    move text2 to wa_material-text2.
    move text20 to wa_material-text20.
    append wa_material to it_material.
    clear wa_material.
endloop.
loop at it_material into wa_material.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text1.
    APPEND WA_LINE TO IT_LINE.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text2.
    APPEND WA_LINE TO IT_LINE.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text20.
    APPEND WA_LINE TO IT_LINE.
    G_THEAD-TDNAME   = wa_material-matnr. " material number
    G_THEAD-TDID     = pa_id.                           " 'GRUN',
    G_THEAD-TDSPRAS = pa_langu.                " EN
    G_THEAD-TDOBJECT = pa_obj.                   " MATERIAL
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        CLIENT                           = SY-MANDT
        HEADER                        = G_THEAD
        SAVEMODE_DIRECT     = 'X'
      TABLES
        LINES           = IT_LINE
      clear : wa_line, g_matnr.
      refresh it_line.
endloop.
Edited by: jvsvijay on Jul 28, 2011 12:51 PM
Edited by: jvsvijay on Jul 28, 2011 12:53 PM
Edited by: jvsvijay on Jul 28, 2011 12:55 PM

How to output money number by text in java?

How to output money number by text in java?
Example: input: 1234 $
output: one thousand two hundred thirty four dollar.

try this...
import java.text.DecimalFormat;
public class EnglishNumberToWords {
private static final String[] tensNames = {
 " ten",
 " twenty",
 " thirty",
 " forty",
 " fifty",
 " sixty",
 " seventy",
 " eighty",
 " ninety"
private static final String[] numNames = {
 " one",
 " two",
 " three",
 " four",
 " five",
 " six",
 " seven",
 " eight",
 " nine",
 " ten",
 " eleven",
 " twelve",
 " thirteen",
 " fourteen",
 " fifteen",
 " sixteen",
 " seventeen",
 " eighteen",
 " nineteen"
private static String convertLessThanOneThousand(int number) {
 String soFar;
 if (number % 100 < 20){
 soFar = numNames[number % 100];
 number /= 100;
 else {
 soFar = numNames[number % 10];
 number /= 10;
 soFar = tensNames[number % 10] + soFar;
 number /= 10;
 if (number == 0) return soFar;
 return numNames[number] + " hundred" + soFar;
public static String convert(long number) {
 // 0 to 999 999 999 999
 if (number == 0) { return "zero"; }
 String snumber = Long.toString(number);
 // pad with "0"
 String mask = "000000000000";
 DecimalFormat df = new DecimalFormat(mask);
 snumber = df.format(number);
 // XXXnnnnnnnnn
 int billions = Integer.parseInt(snumber.substring(0,3));
 // nnnXXXnnnnnn
 int millions = Integer.parseInt(snumber.substring(3,6));
 // nnnnnnXXXnnn
 int hundredThousands = Integer.parseInt(snumber.substring(6,9));
 // nnnnnnnnnXXX
 int thousands = Integer.parseInt(snumber.substring(9,12));
 String tradBillions;
 switch (billions) {
 case 0:
 tradBillions = "";
 break;
 case 1 :
 tradBillions = convertLessThanOneThousand(billions)
 + " billion ";
 break;
 default :
 tradBillions = convertLessThanOneThousand(billions)
 + " billion ";
 String result = tradBillions;
 String tradMillions;
 switch (millions) {
 case 0:
 tradMillions = "";
 break;
 case 1 :
 tradMillions = convertLessThanOneThousand(millions)
 + " million ";
 break;
 default :
 tradMillions = convertLessThanOneThousand(millions)
 + " million ";
 result = result + tradMillions;
 String tradHundredThousands;
 switch (hundredThousands) {
 case 0:
 tradHundredThousands = "";
 break;
 case 1 :
 tradHundredThousands = "one thousand ";
 break;
 default :
 tradHundredThousands = convertLessThanOneThousand(hundredThousands)
 + " thousand ";
 result = result + tradHundredThousands;
 String tradThousand;
 tradThousand = convertLessThanOneThousand(thousands);
 result = result + tradThousand;
 // remove extra spaces!
 return result.replaceAll("^\\s+", "").replaceAll("\\b\\s{2,}\\b", " ");
 * testing
 * @param args
public static void main(String[] args) {
 System.out.println("*** " + EnglishNumberToWords.convert(0));
 System.out.println("*** " + EnglishNumberToWords.convert(1));
 System.out.println("*** " + EnglishNumberToWords.convert(16));
 System.out.println("*** " + EnglishNumberToWords.convert(100));
 System.out.println("*** " + EnglishNumberToWords.convert(118));
 System.out.println("*** " + EnglishNumberToWords.convert(200));
 System.out.println("*** " + EnglishNumberToWords.convert(219));
 System.out.println("*** " + EnglishNumberToWords.convert(800));
 System.out.println("*** " + EnglishNumberToWords.convert(801));
 System.out.println("*** " + EnglishNumberToWords.convert(1316));
 System.out.println("*** " + EnglishNumberToWords.convert(1000000));
 System.out.println("*** " + EnglishNumberToWords.convert(2000000));
 System.out.println("*** " + EnglishNumberToWords.convert(3000200));
 System.out.println("*** " + EnglishNumberToWords.convert(700000));
 System.out.println("*** " + EnglishNumberToWords.convert(9000000));
 System.out.println("*** " + EnglishNumberToWords.convert(9001000));
 System.out.println("*** " + EnglishNumberToWords.convert(123456789));
 System.out.println("*** " + EnglishNumberToWords.convert(2147483647));
 System.out.println("*** " + EnglishNumberToWords.convert(3000000010L));
 *** zero
 *** one
 *** sixteen
 *** one hundred
 *** one hundred eighteen
 *** two hundred
 *** two hundred nineteen
 *** eight hundred
 *** eight hundred one
 *** one thousand three hundred sixteen
 *** one million
 *** two millions
 *** three millions two hundred
 *** seven hundred thousand
 *** nine millions
 *** nine millions one thousand
 *** one hundred twenty three millions four hundred
 ** fifty six thousand seven hundred eighty nine
 *** two billion one hundred forty seven millions
 ** four hundred eighty three thousand six hundred forty seven
 *** three billion ten
}

How to Display 'purchase order text' in MM03 using report program

Hi Friends,
Can anybody suggest me how to display 'purchase order text' in MM03 using report program.
'Purchase order text' tab displays purchase long text of particular material .
I coded as:
      SET PARAMETER ID 'MXX' FIELD 'E'.
      SET PARAMETER ID 'MAT' FIELD k_final-matnr.
      SET PARAMETER ID 'WRK' FIELD k_final-werks.
      CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
It displays Purchasing tab other than Purchase Order Text tab of MM03.
Please suggest me how can i solve this.
Is there any parameter id to set values for Purchase Order text tab

>
Madhu Mano Chitra wrote:
> I want how to navigate to MM03 'Purchase Order text' tab/ view using ABAP code.
> could any suggest me
You can call a transaction and pass it a BDC table that tells it where you want it to go. You have to work out for yourself what to put into the BDC table. The code below works for tcode CATSSHOW.
DATA: bdcdata_wa TYPE bdcdata,
      bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
   CLEAR bdcdata_wa.
    bdcdata_wa-program = 'CATSSHOW'.
    bdcdata_wa-dynpro   = '1000'.
    bdcdata_wa-dynbegin = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'SO_STATU-LOW'.
    bdcdata_wa-fval = '20'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'ANDZEIT'.
    bdcdata_wa-fval = SPACE.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'PAST'.
    bdcdata_wa-fval = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    IF p_selscr = SPACE.
       CLEAR bdcdata_wa.
       bdcdata_wa-fnam = 'BDC_OKCODE'.
       bdcdata_wa-fval = '=ONLI'.
       APPEND bdcdata_wa TO bdcdata_tab.
    ENDIF.
    opt-dismode = 'E'.
    opt-defsize = 'X'.
CALL TRANSACTION 'CAPP' USING bdcdata_tab OPTIONS FROM opt.

Displaying of a text file using JAVA in a browser.

Please can you give me the code for displaying of a text file using a bean and java coding. Please include all files needed. Thanks

please could you give us 200 Uss each for the work done for you plz include all needed recipes plz? thx

Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

You should ask in InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Displaying number in text

Similar Messages

Maybe you are looking for