Displaying only one photo at a time

something crazy has happened in my iPhoto program.
i have been using it for years now, but i cannot escape this situation.
my display preference was to see the rolls listed chronologically and from this screen i could open any roll, and by clicking on one of the revealed images, i would view that image, with a scroll list of the rest of the images in my library above that.
the problem now is that when i open iPhoto, i am seeing only one image in the "Edit" window, with the active blue frame around it. there are no images to scroll through horizontally above this blue framed picture. there is a scroll bar to its right that takes me through my entire library a single image at a time.
how do i restore the main screen so that i have a representation of all the film rolls? how do i get out of the single-image/blue border mode i am stuck in?

Hi tubby,
On the bottom right of the window is a slider. Slides the dot to the left to make the image smaller so you can see more than one across.
Lori

Similar Messages

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
Regards
TD

Drag and drop is working for only one photo at a time. Anyone else having this problem?

I am trying to store some photos on an external hard drive. I can drag and drop one photo at a time, but not multiple photos. It appears to be working, that is,I see the plus sign, but they do not 'drop'.

It sounds as if your Time Capsule is in "Bridge Mode", which would only allow one device to connect to the Internet at a time.
To check......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Check the setting for Connection Sharing
If it is "Off (Bridge Mode)", change it to "Share a public IP address"
Click Update to save your changes

ITunes Artwork Screensaver displays only one album at a time...

...and it changes every time I shut down the computer. I have a lot of album art, how come it only chooses to show one album? Nothing changes if I change the number of rows.
Before, System Prefs used to quit unexpectedly but then I did that plist thing and now it's better but not what the iTunes Album Artwork should be.
I don't know if this will matter but most of my artwork comes from drag and drop (google images) and sometimes it's imbedded (purchased from the itunes store).

First: what settings is the screensaver set at?
2: How is the files saved: on an external or the internal drive?
3: If it is internal: make an alias of the main iTunes folder and point the library for the new account to their in preferences.
3b: If it is external: make sure hard drive is on, open itunes on second account.
Also: Make sure after every update to go into disk utility and repair permissions.
David
Message was edited by: DJ_Boxer

How to make vintage prints slide show one photo at a time?

Does anyone know to program the vintage prints slide show to display only one photo at a time?

The slideshow templates are fixed and can't be changed.
Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold.
Others, in order of price: PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Express $199
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Express is the most capable app of them all. You get what you pay for.
Regards
TD

I "upgraded" to 10.8 Mountain Lion and now can only email one photo at a time

With 10.8 I can now send only one photo at a time from iPhoto through Mail - e.g., two "small" photos with a combined file size of 400 kb will "resize (null)" and freeze Mail, whereas I can send one "actual size" photo 5 mb in size. This stinks since before I could send multiple photos limited only by the size of my pipe.

I am from France , and I have the same problem with multiple photos ! I have 2 IMacs, one gives no problem, and the other freeze while sending more than one photo!
I did not find any solution (except using the mail module from IPhoto, or adding the photo by sliding manually into mail)
Are we the only 3 in the world having this problem?!
More seriously, did you found any solution?
Thank !

My Viewing area only shows one photo at a time now :(

Yesterday I noticed that my viewing area only shows one photo at a time. It used to display thumbnails of all the photos in the selected event - or library. Now, I'm forced to scroll down and view them one at a time or go into edit mode to see some thumbnails across the top of the screen.
Did I accidently do this? Was it part of an OS update? (I've been away for a month and just don't think I did anything to cause a change...) Can anyone tell me how to view all the thumbnails in the viewing area again?
I'm using iphoto 08 version 7.1.5 (378)
I would very much appreciate some help with this.

Thank you so much!! I love simple answers. I actually spent a few hours on this - seemed to play and test all the settings - and I just didn't understand this application of that slider.
Thank you again.
I'm very happy.

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

Try this general troubleshooting procedure:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Only One Photo in a Shared Photo Stream is Displayed

I have a persistent yet simple problem with iCloud Shared Photo Streams. Either when I am sent an invitation for a Shared Photo Stream or create one myself the Shared PS properly appears in the iPhoto Photo Stream window and when I hover over the icon the correct number of photos contained is shown. If I double-click to open the window ONLY one photo appears - always the first photo in the stream. I am never able to view the whole content of the stream on my iMac - although the streams appear correctly on my iPad, my iPhone, another iMac and on the machines of friends I send stream invites to. I have tried many things: quit iPhoto and restart, restart the machine, delete all iLife prefs in the Library, delete iLifeAssetManagement in Library>Application Support, change Libraries, started from a different User, updated iPhoto several times, a complete restore and reinstall of the OS, saying prayers to the iLife gods and crossing my fingers. None of this has helped. It seems clear to me that my problem is not with my iMac, nor with my OS, nor really with iPhoto itself - but involves the interaction of iPhoto library files with iCloud. Having said that, I have no idea how to proceed next. Any thought would be welcome.

Thanks for the thought, Larry - but I have turned off all iCloud on all devices and - oops, but wait. I've done that - but I haven't then rebooted them all. I'll try that tomorrow morning. In the meantime, here's one more small clue. When this first happens I get a crash file in ~Library/Preferences named com.apple.iLifeAssetManagdement.crash.plist. It's too cryptic for me but it says:
bplist00“_AssetManagmentCrashDetailsKey_AssetManagmentCrashCheckerKey°’
_&AssetManagementAgentProcessInfoDateKey_3AssetManagementAgentProcessInfoProcess IdentifierKey_0AssetManagementAgentProcessInfoSupportsDeleteKey_7AssetManagement AgentProcessInfoSupportsSharedStreamsKey_0AssetManagementAgentProcessInfoExecuta blePathKey3A∑Ëô¿U∞y— _i/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAge nt.app/Contents/MacOS/PhotoStreamAgent÷_&AssetManagementAgentProcessInfoDateKey_ 3AssetManagementAgentProcessInfoProcessIdentifierKey_0AssetManagementAgentProces sInfoSupportsDeleteKey_<AssetManagementAgentProcessInfoSupportsSharedStreamsVide oKey_7AssetManagementAgentProcessInfoSupportsSharedStreamsKey_0AssetManagementAg entProcessInfoExecutablePathKey3A∏Ü“@Ôx î _i/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStre amAgent.app/Contents/MacOS/PhotoStreamAgent
π

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!

To select consecutive images click and drag the cursor over multiple thumbnails to select all at once.
To select multiple images that are randomly located hold down the Command(⌘) key and click on those images you want to select.
Or to select consecutive images from a list of images that are together hold down the Shift key and and click on the first photo you want to select and the on the last photo you want in the list.
OT

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

How can I display only one value of a field with two or more values?

Post Author: skiabox
CA Forum: Crystal Reports
I have a field in my report with 2 or more values (depending of another field id).For example for id = 1 the report gives me 2 names in that field.For id = 3 the report gives me 3 names in that field.I want to display only one of these names in the id row.The selection of name is random.Thanks!

Hello Tim, would barely fit in this situation since this code resides on the client’s interaction side of things. I’d recommend using JavaScript for this matter, e.g. var Data_FName1 = document.getElementById(‘Data_FName1’).value;. If you still opt for using CFML, then you’d go for proxying your JavaScript code to a CFC.

Is there a way to delete more than one photo at a time in the Photo application?

Is there a way to delete more than one photo at a time in the application Photos in the iPad? Thanks.

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

How to delete more than one photo at a time

Apparently there is no longer an iPhoto trash. So you don't drag photos to the trash. Instead you hit the delete key and then a second click on delete when you get the message "Are you sure you want to delete this photo." Has anyone found a way to delete more than one photo at a time, though? This is really a hassle if you have just imported 500 photos and are going to end up deleting 450 of them.

I didn't say use the command key and delete. I use the command key for selecting random photos. Then I right click and choose delete from the contextual menu.
I always use right click, but the command-delete does work also in that album.
Depending on what album you are in, there are different menus. In a user created album, the right click would show "Remove from Album" & "Delete Photo". I noticed that was the same for Last Import Album. But at the same time, under image, you will only have Remove from Album. If it is a system album, you will only get the delete menu from either the right click or from the menu under Image.
What you have to remember is if it days delete the photo, it will completely delete it from the library and all albums. If the menu says Remove From Album, then it will only be removed from the album you are in.
In PhotoStream Album, you get only Delete Photo from the right click menu, but under image, you get only remove from album. So if you want to remove an image from PhotoStream, you have to use the top menu so it won't get deleted from the library. If you want to remove a photo completely, you would use delete and it will be removed from the library and photo stream.
So, there are different processes for the different albums. I don't know if that is intentional or just oversight. That may change in the future.

How to select only one record at a time in ALV

Hi all,
I have to use ALV report. Each record on the report output should have a button (or radio button) which will allow the record to be selected. My requirement is to select only one record at a time.
please guide me how to proceed further.
regards
manish

hi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/sampleCheckBoxProgram
Regards
Pavan

Displaying only one photo at a time

Similar Messages

Maybe you are looking for