Displaying query view name in web template.

Hi all,
In the standard web template (0ANALYSIS_PATTERN) there is a text box which displays the query title.  I need to change this so it displays the name of the query view instead of the query.  Does anyone know how to do this?
Many thanks,
Nick.

Hi Nick,
In the template you need not to do any special setting for Query View Name display.
When You use a query view in template that becomes as a data provider, so for every data provider whether that's a query or query view it works same.
You can select to display query technical name or description.
Hope i understood your requirement correctly. If not than please correct me.
Thanks
Dipika Tyagi

Similar Messages

  • Displaying name of the Used Query-View in a Web Template

    Hello Experts,
    I am using a Query View as Dataprovider in a Web Template.
    Now I would like to display the name of the View.
    But with a Text Element this isn't possible.
    You can only display the name of the Query.
    Is there a way to display the name of the used Query-View?
    Thank you for your help.
    D.Kramer

    Hi Sumit,
    hi Björn,
    thank you for your hints.
    We use a template to enable users to create Views.
    So its dynamic.
    That way we don't know the Name of the Views in advance.
    (So putting the text into 'Title' is not possible)
    We already use the "Query View Selection". This works out for users that are able to see different Views. (Power User)
    But is it also possible to display the Query View Name in an Item or with html methods for those templates where there is only one View (as dataprovider) we don't know in advance?
    Thanks again.
    D.Kramer

  • How to Create/Modify/Delete a query view from the web template in BI 7.0

    All:
    In BW 3.5, the <b>Query Selection View</b>  web item was introduced for users to create a query view to save the navigational state of a query. This web item was also available to modify and delete an existing query view.
    The Query Selection View web item <u>does not</u> exist in BI 7.0. I see the drop down web item can be used to display the query views associated to a query.
    Can anyone share how to create,modify,save or delete a <b>query view</b> on the web in BI 7.0
    Thanks,
    Kumar

    Sanjay, we experienced the same issue. Below are a few pieces of information that may be of help: 1-The Save As button on the 0ANALYZER template saves the query to the portal. From Bex Web or Bex Analyzer, you have no access to these saved views. We created a ZANALYZER copy of the 0ANALYZER template and removed the Save As button. 2- If you right mouse click on any item in the query results grid of Bex Web, you get a small menu. Clicking on the menu item Save View will save the view to BI. You do not have the ability to delete the saved views from Bex Web. However, you can delete them from Bex Analyzer. This was not an option for us since most of our users are using Bex Web. 3- On the same menu, clicking on Bookmark, saves the navigation and also opens the Internet Explorer Favorites maintence window. The navigation is saved as an entry into the users Internet Explorer favorites where they can organize and delete their entries. However, deleting the favorite does not delete the entry for the bookmark in BI. The bookmarks are stored in table RSWR_DATA. Program RSWR_BOOKMARK_REORG can be used to manage the saved bookmarks. We are loading RSWR_DATA into a chracteristic so that we can query the information in order to help us manage it. I hope this helps you and others that appear to be struggling with the issue of saved views in Bex Web.

  • Display Query View in WAD

    Hi,
    Anybody knows how to display the selected QUERY VIEW Description (i.e. in a text box) in a web template?
    (I know you can select a Query View in a drop down, so it should be possible!)
    Thanks,
    Max

    Thanks, very helpfull.
    I´m using BI 7.0
    However, when I do as you suggested, I still get the query name, not the query view name.
    The query view should be selected dynamically from the view that is displayed at that moment.
    Also, can you incorporate saved views from the Bex Portfolio and display their names?
    Edited by: Max Cohen on Sep 11, 2008 5:16 PM

  • Access a query view from the web

    Hello,
    I have a query with a view.  I would like to simply be able to link to this query view in a Web Browser window.  What would the URL be?
    How can I do that, is it possible?
    I know I can open the default view of the query, by choosing on Bex Toolbar (Tools > Launch in WebBrowser > Query (Default View))
    Thanks,
    Nick
    Message was edited by:
            Nick Bertz

    Just add this to your URL: &DATA_PROVIDER_ID=[Technical name of view]
    The result would be: http://host:port/sap/bw/bex?DATA_PROVIDER_ID=[Technical name of view]
    Nothing else is mandatory

  • Query View name not saved in "Analysis Grid Properties" under Data Provider

    Hi BW World;)
    We are on BI 7.0
    I have created a BI workbook which contains a query view.
    However when we go into design mode and then "analysis grid properties" for this query view then "change data provider" it does not show the query view name but the query name. (we have saved the workbook)
    Is this the normal scenario?
    Surely should show the "query view name " and not the "query name" as confuses what data provider is being used?
    Is this a bug?
    Best
    Stevo.... Points of course... Thanks in advance.;)
    Edited by: bw4eva999 on Sep 10, 2009 4:40 PM     spelling

    Hi,
    You have created a workbook on top of a Query View which is again depends on a Query.Now the base for Query View is a Query.So the underlying Data Provider for a workbook is a Query.
    Hence when you go to Properties of grid->Change Data Provider,it shows the Query and the InfoCube,but not the Query View.
    So this is not a bug and this how its been designed.
    If you click for the Information of that workbook,it will show the Query and Info Provider,but not the query View.
    Though it looks like wierd,it is not a bug.
    Rgds,
    Murali

  • How to Locate "Query View u2013 Selection" web item in WAD

    Hi,
       Where/How can i find the "Query View u2013 Selection" web item in Blank Templete of a WAD
    or
    From where i can install it from Business Content
    Thanks

    Hi,
    Are you with 7.x WAD?
    This option will be available with that.
    Or else,after putting Analysis Item->Properties->General tab->Click "New Data Provider" icon->Select the Type dropdown as "Data Provider of Type Query View".
    This will list three radio buttons ""Query View","Query" and "InfoProvider" under "Define Data Provider Type".You can select "Query View" radio button and assign Query View.
    Rgds,
    Murali

  • Query Where Used in Web Templates

    Hello to all BW experts,
    Do anybody knows how it is possible to write some code in ABAP to help users to find a Query Where Used in Web Template (Tables, Function Modules etc.)
    Regards,
    Theodore

    You could use one of the text elements available.  Don't know the ABAP.  But it should be possible.  Try to place this under ABAP questions if you don't get eny answers..

  • Query or Workbook or Web Template-Process chain

    Hai Friends,
                   I want to broadcast reports.Which type of the report is more attractive among Query or Workbook or Web Template?Suppose if we select Workbook as type,will it support for process chain which will create to automate the broadcasting process?On every data change will the workbook automatically changes it's data.Usually we will do layout settings ONLY for workbook.Will all the settings remain same when the new data is changed every month?
    Please, reply me with ur valuable answers
    Thanks
    Mohan Chand Reddy A

    Hi Mohan,
    You can use either of them for broadcasting, just check the requirement with your business. And using process chain you will raise an Data change event and in your broadcast setting you will have to mark the option i.e. Broadcast on data change.
    So whichever queries or workbooks have that setting on the particular Infoprovider. And once you raise the data change event for that Infoprovider through process chain, all the reports will be broadcasted.
    Regards,
    Durgesh.

  • Customer Exit - Fill variable depending on query view name

    Hi
    We're running BW 7.0
    We have a query which is used for broadcasting and as well for user input. That's why we have a variable which is default filled by a customer exit. This variable is the week and is default filled: fist week of year up to actual week.
    But now we have for the same query different selection requirenments.
    The same query should be send by email with
    - first week of year up to actual week
    - previous week
    Because of dynamic variables the calweek needs to be filled by customer exit and worked until now fine - until a second requirenment was coming (separat broadcast only with previous week).
    I don't like the idea to copy the query because of maintenance work.
    I'd like to have several views - and depending on the view name etc. I would fill the customer variable. But I don't get the query view name into customer exit - right?
    Do you have any other ideas?
    How do you handle such requirenments?
    Thx
    Roger

    Hi Helder,
    I understand your requirement but I don't understand the solution you are using. I think it's a bit tricky.
    What I would do is:
    Create three variables:
    - VAR1: Single value, mandatory, ready for input, customer exit. Used to store "User input date"
    - VAR2: Select option, customer exit, not ready for input. Used to store Valid From restriction.
    - VAR3: Select option, customer exit, not ready for input. Used to store Valid to restriction.
    Then, use this code:
    WHEN 'VAR2'.
    IF I_STEP = 2.
    READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
    with key VNAM = 'VAR1'.
    CLEAR L_S_RANGE.
    L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'LE'.
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
    WHEN 'VAR3'.
    IF I_STEP = 2.
    READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
    with key VNAM = 'VAR1'.
    CLEAR L_S_RANGE.
    L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'GE'.
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
    I think this should work, and you'll have three independent variables used for one purpose each.
    Hope this helps.
    Regards,
    Diego

  • View previous precalculated web template

    Hi,
    I'm working with Reporting Agent, because I need Precalculated Web Templates in my portal.
    I need to access, not only, the last precalculated Web Template (i.e. this month), but also the others (previous months)!
    How can I view previous precalculated web template?
    Could anyone help me?!
    Thanks in Advanced
    Fede

    ... no, I'm not using download scheduler at the moment! (I have tryed to use it, but it doesn't load my .gif  and .css from /bw/Mime/Customer/Images/)
    In BW Reporting Agent there is Document Overview section, where I can see the history of my precalculated web templates, how could I access them?!
    thanks...

  • Running query in default WAD web template

    Hello Experts,
    Can you please guide me about how i can run a query in a default web template created in BEX Web Application Designer?

    Welcome to SDN.
    Kindly use BEX forum for BEX/WAD related queries.
    (SAP Business Explorer (SAP BEx)).
    coming to your question.
    you can set the webtemplate created by you as the default webtemplate from transaction RSCUSTV21.
    once its set, if you open query on the web (from query desinger,etc) it will utilize the default template you have set.
    Regards
    Raja

  • Views in a Web Template

    Hi,
    I created a ZZ web template with 4 analysis web items for 4 views.
    These 4 views are generated on a query.
    My requirement is to schedule the web template using bex broadcaster to send daily email as PDF.
    When i tested the PDF attachment...it looks well apart from
    How/where can i make a setting that output of every view will start in a new page in the PDF.
    Example: At present if the view 1 display results in 1 and half page ad the veiw2 is starting in the same page
    But my requirment is the output of view should start from page 3
    Please update

    Hi,
    have you managed the page break per view? If so, please put some light on it - I have the same customer request...
    Thank you!
    Best Regards,
    Volker Schottdorf

  • Displaying traffic light in a web template.

    Hi BW Experts,
    Here goes my problem:
    In my project I added a new row into a Bex Query which is working fine. But when i executed the same query in the web templates in the WAD i got a formatting error while displaying. There are particular fields for each row in which values itself are not displayed instead it displays either red or green traffic light if values are decreasing or increasing respectively. Originally there were 5 rows, when i added a new row between the 4th and the 5th row, the 6th row displayed values but no traffic light while the newly added 5th row fields displayed traffic lights. when I tried to swap 5th and 6th row, same problem ocurred again in the 6th row.
    Thanks in advance.

    Hari,
    Use SE24 and enter the class name to modify it.
    See the help link for more details:
    http://help.sap.com/saphelp_nw04/helpdata/en/b3/f4b1406fecef0fe10000000a1550b0/frameset.htm
    Raj.

  • Query designer report and Web Templates

    Dear All,
    I have a very basic/stup doubt.
    Are reports made through Bex Query Designer and Web Templates the same?
    Actually there is a following requirement:-
    "Navigate from a BW Web template to a PCUI application". I have a document related to it but it gives me step on how can i modify my web templates to achieve this functionality. But all my reports are made through query designer and it available to user through Web Dynpro portal.
    So i just wanted to know is Web Template and Reports made through query designer the same? So that i can implement the changes in my report.
    Thanks.

    Hi Anup,
    by using web templates we can use N number of data providers (Queries) for a single analysis view with various available options. - N number of Queries can be assigned to Web template to create a web report
    but by using the Query designer ,you can create a single report which may not provide sufficient information to the client and the number of features are less compared to web template.
    as you mentioned that you are using the web dynpro.
    i think the web dynpro requires the web reports as an iview and ths iview can be created by using the Query designer and or web app designer.
    so the most clear view can be given to client using the WAD reports

Maybe you are looking for