Displaying remote panel on different screens with different screen resolution

Hi
I am running a vi on the PXI . But when i try to open the remote panel it gets shifted on different screens
with different screen resolution. I have tried to set the windows run time position using the vi properies
but to no avail. Can anyone help me on this issue??????
Regards
Amit Ahuja

What is your lv version?

Similar Messages

  • HP 6730b can I swap screens with different resolutions?

    Hi,
    Is it possible to swap screens with different resolutions on a HP 6730b?
    Mine is 1680x1050 pixels and I want to find a 1280x800 screen to replace it.
    (letters are far too small for an old fart like me. ;-)
    The resolution list does support 1280x800 but it looks like viewing the screen through dirty glasses.
    Just wondering if the interface is the same.
    Cheers, 
    Bas

    Usually people want to go in the other direction. Here is the Service Manual:
    Manual link
    The parts list shows a panel that is SXGA+ (1400 x 1050) and a WXGA (1280 x 768 or 800) panel.
    There are multiple motherboards, but the only difference appaears to be whether there is a slot for a cellular card or not. In other words if you install the WXGA panel the motherboard should work with it and you will get 1280 x 800 resolution looking good. Laptop displays and other digital panels only work at their maximum aka native resolution and you get that muddy look if you try to run them at a lower res. You want to buy the whole panel with the cable designed for the WXGA....sometimes the cables will not work with a different resolution screen. Post back if you need further help finding a screen. You may find it cheaper and easier to sell or trade your laptop for one with the lower resolution screen.

  • Display of text of different rows with different color - JTable

    Hi all !
    I have struck in a problem. I have to display the different rows with different color in the JTable. I have created an arraylist in the model class, which stores color of all the rows. Now in renderer class, I am just picking up color from the arraylist, taking rowIndex as index for arraylist. I used to set foreground color for each row in the renderer class. The problem is that it is not showing all the rows properly, sometimes it show all the rows correctly, but as i resize the window/panel, it starts behaving abnormally, some text is painted properly, but other aren't.
    Does anybody have any solution regarding this problem.
    One thing i want to mention is that in getTableCellRendererComponent() method, i used to retrive the color everytime, and setting the foreground color of the text. Is this a right approach or some other technique have to be followed.
    here is code of renderer class ---
    import java.awt.*;
    import javax.swing.*;
    * Renderer to plot stage record table.
    public class ExStageCellRenderer extends javax.swing.table.DefaultTableCellRenderer
        Color curColor;
         * returns component to be painted, overridding this method from
         * DefaultCellRenderer
         * @param table
         *            table whose component has to be plotted
         * @param value
         *            value of that particular cell
         * @param isSelected
         *            is Cell selected
         * @param hasFocus
         *            has the cell got focus
         * @param row
         *            row of the cell
         * @param column
         *            column of the cell
         * @return painted component
        public Component getTableCellRendererComponent (JTable table, Object value, boolean isSelected, boolean hasFocus, int row,
                int column)
            Component component = super.getTableCellRendererComponent (table, value, isSelected, hasFocus, row, column);
            ExStageDataModel model = (ExStageDataModel)table.getModel ();       
            if (curColor instanceof Color) {
                    curColor = model.getColor(row);
                } else {
                    // If color unknown, use table's foreground color
                    curColor = table.getForeground();
            String tooltip = "";
            StringBuffer stringBuffer = new StringBuffer ();
            for (int i = 0; i < table.getColumnCount (); i++)
                    Object Value = table.getValueAt (row, i);
                    if (Value == null) continue;
                    stringBuffer.append (Value.toString () + "    ");
            tooltip += stringBuffer.toString ();
            tooltip = tooltip.trim ();
            ((JComponent) component).setToolTipText (tooltip);
            if (column == 1)
                this.setHorizontalAlignment (SwingConstants.CENTER);
            else if (column == 0 || column == 4 || column == 5)
                this.setHorizontalAlignment (SwingConstants.LEFT);
            else
                this.setHorizontalAlignment (SwingConstants.RIGHT);
            // LOOK!! should turn tip off if there is none !!
            component.setForeground (this.curColor);
            //System.out.println("render : " + component.getBounds ());
            //component.validate ();
            component.update (component.getGraphics ());
            return component;
    Waiting for reply....
    Code snooker

    Hmm, why are you doing the curColor instanceof? What does this accomplish? I don't see any reason to ask what it was before; all you should be interested in here is what you want it to be now.
    All you should have to do is say:
    this.setForeground(model.getColor(row));I also don't see why you're doing the update() -- JTable is going to do that for you at the appropriate time, you have no idea if now is the right time to do it or not. In fact it probably isn't, you're probably updating the previously-drawn cell with your new color and alignment, which may be the strange behavior you're seeing.
    Also, I don't see why you're doing the super. All that's going to do is return "this", so why not just use "this"?
    Well, without knowing your larger code or exactly what you're trying to accomplish, maybe I'm just missing something.
    I've just recently been working on a program where I had some similar requirements -- different foreground and background colors and alignment -- and I found it much cleaner to create a class to hold all this data, and then create a default renderer for that class. Then I made some constructors for this "attribute" class that let me set whatever I need, like
    public CellAttrib(String s,Color c,int alignment,Border border)
      this.s=s;
      this.c=c;
      this.border=border;
    // with suitable defaults ...
    pubic CellAtrtrib(String s)
      this.s=s;
      this.c=Color.BLACK;
      this.border=null;
    }Then the renderer just queried the cell-attributes class, as in:
    setForeground(value.getColor());
    setHorizontalAlignment(value.getAlignment());
    setBorder(value.getBorder);

  • Not able to color different rows with different colors in a column of table

    Hi,
    I am trying to to display different rows with different colors in a column of the table based on some decode condition.
    I have gone through the following threads :
    Can we colour the rows in the column of a table
    Changing Color of a value in a column
    This is what i have done :
    1.Added the following code to custom.xss(changed the name to Custom.xss as suggested in one of the above threads) --- in path ---- jdev\myhtml\OA_HTML\cabo\styles
    <style selector=".1">
    <includeStyle name="DefaultFontFamily"/>
    <property name="font-size">11pt</property>
    <property name="font-weight">Bolder</property>
    <property name="color">#008000</property>
    <property name="text-indent">3px</property>
    </style>
    <style selector=".2">
    <includeStyle name="DefaultFontFamily"/>
    <property name="font-size">11pt</property>
    <property name="font-weight">Bolder</property>
    <property name="color">#FFFF00</property>
    <property name="text-indent">3px</property>
    </style>
    2. Sql query of the VO is :
    select comments,role ,decode(role,'REQUESTER','1','2') Colorattr from xxat_sars_action_history where request_id = :1 and event_name = :2 and action_code <> 'PENDING'
    order by sequence_num desc
    3. Coded the following in the process request of the controller:
    OATableBean table = (OATableBean)webBean.findIndexedChildRecursive("CommentsTB");
    OAMessageStyledTextBean roleBN = (OAMessageStyledTextBean)webBean.findIndexedChildRecursive("role");
    OADataBoundValueViewObject cssjob = new OADataBoundValueViewObject(roleBN,"Colorattr");
    roleBN.setAttributeValue(oracle.cabo.ui.UIConstants.STYLE_CLASS_ATTR, cssjob);
    where 1 and 2 form the colors ( i have even tried with 'Red' and 'Yellow'...as it was not working replaced with 1 and 2)
    4.The query returns data fine with corresponding 1 and 2 values.
    But different colors are not getting reflecting on to the UI.
    I am testing this on my local jdev.
    Please do let me know if i am missing something.
    Thanks ,
    Sushma.

    Any Clues please.....
    Thanks,
    Sushma.

  • HT204053 i RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    I RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

  • Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    The link is to a discussion started on 12/18 in the FiOS Internet forum.  Here's the link I get now, however it is different than the link I pulled a few hours ago.  If this system changes the link again, it may not work.
    http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
    You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
    Here's a link that is in the thread that gives more detail.
    https://secure.dslreports.com/faq/15984
    Good Luck!
    P.S.  "Copper Contributor" is my "rank."  gs0b is my user name.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Is it possible to have 2 icloud (from 2 different iphones with different apple ids) on the same computer?

    I am inquiring as to if you can 2 different icloud accounts (that come from 2 different iphones with different apple ids) on the same computer. I would like both iphones to be able to back up to the same computer since we have different accounts/pictures/mail etc.

    Yes, if you create 2 seperate user accounts.

  • Different templates with different datasource files

    Hi All,
    Can someone tell me how we can have two different templates with different datasource files in one BIP report.
    I need PDF template based on one xml file and CSV teamplate based on another in one report.
    Thanks.

    you can have two data-set or query , and select concatenated data and have a single xml file.
    But pdf template will look at those, dataset in the xml, which you want. and CSV will look only on the other dataset.
    what method are you using for CSV ?

  • Help! Resizing different documents with different resolutions?

    Hello!
    Please help me with my situation:
    I was trying to make an action that will decrease 1 inch to all sides of my document (the document size was 12x36 inches) and hopefully to other documents.  I don't want to crop the image, I just want to resize the whole image to 10x24 inches, leaving a 1 inch transparent border (the gray and white checkerboard) to my document. I started resizing manually, but it was time-consuming so I tried to make the action I stated above. I was expecting that it would decrease a proportionate 1 inch to the top, bottom, left and right sides of other documents, but it didn't. Any procedure to make this happen in different documents with different sizes and resolutions?
    PS: All the the documents that I will resize would eventually be printed ( I don't know if this would help).
    Thank you for your help!

    Kursover wrote:
    I was trying to make an action that will decrease 1 inch to all sides of my document (the document size was 12x36 inches) and hopefully to other documents. I don't want to crop the image, I just want to resize the whole image to 10x24 inches, leaving a 1 inch transparent border (the gray and white checkerboard) to my document. I was expecting that it would decrease a proportionate 1 inch to the top, bottom, left and right sides of another document, but it didn't. Any procedure to make this happen in different documents with different sizes and resolutions?
    Easy to do in a script not so easy in an action unless you know that there is no background layer or that all have backgounds.  You can not add transparent canvas to a document with a background layer for brckground layers do not support transparence. Documents may or mant not have a background layer and background layers can be converted to a normal layer.  Actions can not use logic without using a script to see if there is a background.  My Crafting Actions package contains a utility script for actions that will convert background layers to a normal layer should a document have a background layer. Once you know there is no "Background" the rest is easy to do in an action with menu limage canvas size check relative and set width and height to 1" the will add 1"
    Decreasing -1" will CROP any layer the has not transparent pixels in the outter 1"
    Crafting Actions Package
    Contains
    Action Actions Palette Tips.txt
    Action Creation Guidelines.txt
    Action Dealing with Image Size.txt
    Action Enhanced via Scripted Photoshop Functions.txt
    CraftedActions.atn Sample Action set includes an example Watermarking action
    Sample Actions.txt Photoshop CraftedActions set saved as a text file.
    A script can retrieve the width and height of a document to changs size you need to resize the document this will not crop but will resample and you most matain aspect ratio elss resize will distort. Decreasing canvas size may crop...
    12 Scripts for actions
    Example
    Download

  • Running different databases with different users OpenVMS?

    Hi,
    We run a few databases 9.2.0.5 in OpenVMS 8.2.
    Is there any problems running the different databases with different accounts?
    Anything to think about, more than to create a different account with same credentials as the original ORACLE user?
    BR
    BjörnR

    Hi,
    I'm not sure if I understood your question, but from my experience I can tell that YES, you can have different accounts - belonging to the same DBA group - on different oracle installations and this can be the case even if you're running a cluster.
    Hope this helps.
    Regards,
    Naveed.

  • I have published two different blogs with different usernames and passwords

    I have published two different blogs with different usernames and passwords. When I want to publish one, it goes through the whole process of publishing the other blog as well - and takes too long.
    How can I publish each blog separately?

    I have published two different blogs
    I think you need to ask in the iWeb forum rather than this one (for iWork/Numbers):
    http://discussions.apple.com/forum.jspa?forumID=1309

  • HT204053 Can you sync pages files on different devices with different apple ids?

    Can you sync pages files on different devices with different apple ids?  I have a personal iPad and one given to me for work. They are set up with two different apple IDs.  I do all of my lesson plans in pages.  I want to be able to create plans on both devices, but need to know if there is a way to sync the files without emailing, etc.

    Welcome to the Apple Community.
    No, that's not possible. A better way of working around this than emailing the documents to yourself is to use a third party storage solution such as Dropbox and a webDAV server to upload the documents.

  • Can a single HID report descriptor support multiple touch screens with different sizes?

    Hi Experts:
    I have a question for specifying touch monitor sizes in the HID report descriptor:
    Can ONE HID report descriptor support multiple touch monitors with different sizes ?
    Thanks in advance
    leo

    My screen shot is from AA9, and I have seen that the UI for AAX is vastly different, but...
    Choose Paper Source from Page Size should be the "one-touch" solution your looking for.
    In my test, my Konica-Minolta Bizhub failed to detect the proper paper trays, but Acrobat correctly spooled the pages.

  • Bridge_How Fit-to-Screen with different resolution pictures in Fullscreen/Slideshow

    Hallo,
    I´m looking for a solution for my following problem:
    I have several photographs in totally different resolutions. Some are pretty small, some are huge.
    I want to show them with Bridge in FullScreen-Preview or maybe as a slideshow.
    How can i bring them all to fit the whole screen, even if the resolution is to small to fit regularly.
    In other words, is there an option for dynamic zooming to bring every frame to FIT the Screen, regardless which resolution it got?
    I discovered "scale to fit" in the slideshow options, but it doesnt work for me.
    An zooming every file in the right position and size is not an option.
    Im sure Bridge is able to do it, beacause even IrfanView and ApplePreview are able. But where to find this option?
    Can anybody help?
    Thank you a lot
    best regards
    madlo

    As far as I know, Bridge will not enlarge small images. If you hit '+' on fullscreen preview, it zooms in, but keeps the same zoom for every image.

  • Running LV application from remote panel which measures FP through different LAN

    My LabVIEW application is running in a PC and it takes measurements from the FieldPoint modules which are connected via the FP-1601 network module.
    I want to view and execute the application from another PC using remote panel option. The master PC has two LAN connections, one seperate connection for the FieldPoint module and the second one to connect with other PCs.
    But the application returns error while initializing the FP modules when executed from remote panel.
    Will the application be able to communicate and take measurements from the FieldPoint module in this case? Please explain.
    Thanks for the help and awaiting earlier response.
    Thank you,
    Rajeswari

    In principle this I believe this is a TCP/IP routing issue.
    If your fieldpoint unit is connected to one card lets say
    Card 01 Host 10.0.0.1 255.255.255.0 ---- Fieldpoint 10.0.0.2 255.255.255.0
    Card 02 Host 168.95.0.1 255.255.0.0 ---- Lan 168.95.x.x 255.255.0.0
    The routing in the host takes care of which card is used for which network segment.
    My guess is that you have not seperated the network segments as shown above.
    Is this correct ?

Maybe you are looking for