Displaying some other messages in quality ?

Hi,
I have created a dialog program and transported to quality, instead of displaying my custom message, its showing the message ' No vendor specified ' , for all the ztransaction ( Vendor exists in Quality Server) ?
Thanks,
Siva

Hi Siva kumar,
Hope you created a message class along with your custom program . Did you transport the message class, if used. Usually this type of messages come up, if the Z- messages associated with it stored in the message class are not ransported to the quality or other servers.
Please check the same and let me know if I am wrong.
Regards
Nagaraj T

Similar Messages

Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

How to display Some message in the BEX Explorer

Hi Experts,
We have a scenario where we will check for a condition in the User Exit Variable.
Depending on the condition we need to stop the execution of the query and display some message.
Can any one please help me in explaining me how to display message in the BEX and stop the Query Execution.
Thanks in Advance,
Premkumar

Somenath,
I think from what I gathered in the other posts on SDN about exceptions that it can be used only within a function module and not directly ..
http://help.sap.com//saphelp_470/helpdata/EN/9f/dbaa0635c111d1829f0000e829fbfe/content.htm
Try creating a Z Function module to display the exception but then the exception would stop only your Z Function module and not the user exit from going further..
Arun
P.S some more dope on the same with regard to raising exceptions in programs ( in your case ZXSRU01)
http://help.sap.com/saphelp_nw04/helpdata/en/55/bff20efe8c11d4b54a006094b9456f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/636d2012fc11d5991e00508b5d5211/content.htm
Message was edited by:
Arun Varadarajan

How do you search through configured Alternate Extensions to correct error message : The phone number or extension has already been assigned to some other object.

When configuring a new Unity Voicemail Account I receive this message : The phone number or extension has already been assigned to some other object. I understand that this means that the 10 digit number I am trying to configure as the alternate extension for this user is already configured for another object with Unity.
I need to search by the 10 digit number and determine where it is configured so I can change it and map to the correct end user.
I have attempted to to search Users via DTMF Access ID using the 10 digit number with nothing being returned via that search.
How do I Search all of the copnfigured Alternate Extensions within our Unity Server?

A subscriber info dump is likely the fastest way. If you're curious regarding other methods, you can also use the Data Link Explorer (CUDLE) tool which is in the Cisco Unity Tools Depot. All extensions for all objects are referenced in the "DTMFAccessId" table. The View menu has a Query Builder which you can use to compile a SQL query that searches for a digit string. It's best to search for both the 10 digit string as well as an abbreviated string as Unity sees them essentially the same and they are usually should be associated with a single subscriber. Once you find a match, you can use the "ParentObjectId" value associated with the DTMF access ID to look for a matching owner in the "GlobalSubscriber" table. The ParentObjectId should match the SubscriberObjectId for a subscriber (assuming the DTMF access ID is assigned to a subscriber). This is the same thing as looking at SQL; however, you are not directly accessing the DB so this is generally considered the safest way to browse and get a feel for where things are.
Hailey

Error message need to display on other screen

Hi All,
I have implemented the enhancement implimentation for one perticular transaction code and i am valdating the one field in the one sub screen and i am displaying the error message. but its displaying in that subcreen.
But my requirment is i need to display that message in another sub screen.
can any body tell me how it is possible to do the validations on one screen and displaying the error message in another screen.
Thanks.

HI,
Is that subscreen is under tabstrip.....then you can use the sy-ucomm ....
Thanks,
Shailaja Ainala.

After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Flash Player. Even though it's already installed. How can I fix that?

After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Adobe Flash Player. Even though it's already installed the situation remains the same since the last month.
Can I fix that just doing the upgrade for the Yosemite?

Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
Thanks fore responding to my question.
DFelice

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Report displaying junk characters or Greek or some other language

Hi All,
I have one Custom report in PDF. It is a simple tabular report. When I run this report from Report Builder, it runs fine but when I register it in Oracle Apps and run it from there, it displays all the characters in Greek or some other language or junk characters. Sometimes it works if I change font. But its a trial and error. I dont understand why is it happening. This has happened with one of my other reports too. It worked when I changed the font and its size. This time it didnt work. Any clue how can I fix this issue?
Any lead will be appreciated.
Thanks,
CAH
Edited by: user638181 on Sep 3, 2009 7:05 AM

Hi Hussein,
We have similiar issue with our custom PDF reports. We are in the process of upgrading from 11.5.9 to R12.
All these reports work fine in 11.5.9.
Following are the details of our R12 environment:
1) What is the application release? Application release is 12.1.1
2) What is application/database characterset? Database - 11.1.0.7.0 and characterset is UTF8.
3) Is this a text or bitmap report? What is the report language? - It is a text report and Language is English
4) Do you use PASTA for printing? - Yes we do
5) Do you get the correct printout if you print the concurrent request output file from the OS? - If I run the report from report builder directly, Yes. If from Oracle Apps, no.
6) Expected output: "Days in Queue"
Actual Output: when I copy and paste the output here it is showing correct. But on the report it is showing
something like ∆Ωµ.....
7) If I try changing the font, it works
8) A different text field on the same report with the same font shows good.
I would appreciate your help on this one.
Thanks
Vishnu

Hi, While writing an email online using Firefox 3.6.3, I was using one of the "CTRL+left or right arrow" to move the cursor along the text. I must have pressed some other key because the display has become huge - and I can't scroll vertically or horizont

Hi, While writing an email online using Firefox 3.6.3, I was using one of the "CTRL+left or right arrow" to move the cursor along the text. I must have pressed some other key because the display has become huge - and I can't scroll vertically or horizontally, which makes using the Mail pages of Hotmail impossible. I have since logged in using MSFT Explorer and it works fine. This problem occurs only on the Mail page of Hotmail Live not on the home page or others.
Could you please let me know if this is a problem with Firefox, or if you have any advice on how to reset the appearance of Hotmail in Firefox?
== This happened ==
Just once or twice
== While I was compiling an email in Hotmail Live

Wow, lightning fast and absolutely right!
Thank you so much!

Logo displaying in productin but not displaying in some other user

Hello experts,
I developed payment advice sheet using scripts and transported to production successfully.In production also the output is dispalying correct but some other user (clnt uses different user in that only logo is not displaying) remaining output is correct.
But only logo is not displaying.But in production logo is displaying.What is the problem?
please help me in this?

Please clarify your posting...
In production, the logo displays correctly for all but one user?
Or, did you mean that in the production instance, the logo is correct, but in other SAP instance(s), such as training, etc., the logo does not appear?
If the second case, check to see that transport completed in all target instances.
If the first case, sorry, no ideas about what would cause that.

Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

Some fonts I use for my iWeb-made site are not properly displayed on other computer. How can I sort it out?

Hello everybody.
I have made a website and I have noticed that some fonts and some background shapes are not correctly displayed on other computers (non Mac users).
Could you help me to sort out this problem?
Thanks
Andrea

It's not a browser issue per se either.
You see the Font because the font is your computer. The same font has to be on the computer of your visitor.
iWeb use a substitute font based on a font list it uses. If that substitute font is missing too, the browser chooses a similar font, which is not always the one you want.
You can force your font to display on a PC (but not with Internet Explorer) using a custom stylesheet with an embedded font. See it here :
http://www.wyodor.net/mfi/global/Blank.html
http://www.wyodor.net/_Demo/Fancy/Dynamic_Text.html
http://www.google.com/search?q=embedded+font

Why is one iphone displaying the text messages of the other 2 iphones in my house?

Why is one iphone displaying the text messages of the other 2 iphones in my house?

That would be imessage and not text message.
As stated by sberman, it's because the users are sharing apple id.
On each devices - settings - message - send&receive- remove or uncheck the apple ids.

[solved] "monospace" font displayed as some other font

For some reason (that I am unable to figure out for myself), the "monospace" font on my system is not displayed as such, but replaced by some other font, presumably* by the last one installed to the system. See this screenshot of uzbl-browser as an example; leafpad's font-selection dialog would be another.
* A while back (don't remember when) "monospace" started being displayed as some pleasant sans-serif font, which I did not investigate. When I installed some blackletter fonts (ttf-unifraktur) recently, it started being displayed as one of them, which is more of a nuisance, see screenshot.)
What could be going on here? What is the "monospace" font anyway?
Last edited by Franek (2014-02-27 20:54:20)

First: I probably should have mentioned that I am using the infinality-bundle and infinality-bundle-fonts repositories.
(Re-)Installing ttf-dejavu instantly made uzbl pretty again. But actually, I did not have ttf-dejavu installed in the first place, but t1-dejavu-ib from the infinality-bundle-fonts repository. When I change back to t1-dejavu-ib, Monospace is displayed as a blackletter font again.
Here is the output of "fc-match monospace" with ttf-dejavu installed:
$ fc-match monospace
DejaVuSansMono.ttf: "DejaVu Sans Mono" "Book"
And here it is with t1-dejavu-ib:
$ fc-match monospace
sawarabi-gothic-medium.ttf: "Sawarabi Gothic" "Medium"
About this font (which is certainly not the blackletter font I am seeing in uzbl):
$ pacman -Qs sawarabi
local/ttf-sawarabi-ib 0.0045-2 (infinality-bundle-fonts)
Sawarabi font family for Japanese script.
I have nothing in ~/.config/fontconfig, whereas /etc/fonts/conf.d/ is filled with several symlinks, most of which belong to the fontconfig-infinality-ultimate package. They all look alright to me, or rather: I trust that the infinality-bundle(-fonts) packages are doing the right thing. (Should I ask bohoomil about this?) Here is a list:
$ pacman -Qo /etc/fonts/conf.d/*
/etc/fonts/conf.d/10-base-rendering.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/10-scale-bitmap-fonts.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/30-metric-aliases.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/31-fix-cantarell.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/35-repl-custom.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/40-non-latin.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/42-luxi-mono.conf is owned by font-bh-ttf 1.0.3-1
/etc/fonts/conf.d/45-latin.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/49-sansserif.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/50-user.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/51-local.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/65-ttf-noto-sans-ui.conf is owned by ttf-noto-sans-multilang-ib 1.04-2
/etc/fonts/conf.d/65-ttf-noto-sans.conf is owned by ttf-noto-sans-multilang-ib 1.04-2
/etc/fonts/conf.d/65-ttf-noto-serif.conf is owned by ttf-noto-serif-multilang-ib 1.04-2
/etc/fonts/conf.d/68-override.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/82-no-embedded-bitmaps.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/82-no-force-autohint.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/82-no-ttf-as-bitmap.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/83-yes-bitmaps.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/83-yes-postscript.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/88-forced-synthetic.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/90-dejavu-t1.conf is owned by t1-dejavu-ib 2.34-4
/etc/fonts/conf.d/90-non-tt-fonts.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/90-opensans-t1.conf is owned by t1-opensans-ib 1.2-7
/etc/fonts/conf.d/90-tt-fonts.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/92-selective-rendering.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/93-final-rendering.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/94-no-synthetic.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/95-reject.conf is owned by fontconfig-infinality-ultimate 2.11.0-15
/etc/fonts/conf.d/99pdftoopvp.conf is owned by cups-filters 1.0.46-1
/etc/fonts/conf.d/README is owned by fontconfig-infinality-ultimate 2.11.0-15

I am receiving blocked plug in message and my computer no longer will play vieos or display some messages.

just recently mu computer will no longer play videos or display some pictures and it says blocke plug in.
I have an old Mac Book, version 10.6.8
safari version 5.1.10

When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser, but check this also:
http://support.apple.com/kb/HT5655?viewlocale=en_US&locale=en_US which also covers ‘blocked plug-in’.

Displaying some other messages in quality ?

Similar Messages

Maybe you are looking for