Displaying table of contents

Hi I was wondering if there is a way to display the table of contents after a certain slide.

Thanks, Mark, but I knew it (wondering why?)
Just hoping it will be realized.
Lilybiri

Similar Messages

Displaying pagenumbers in table of contents in the 2nd page of a smartform.

We have a requirement where we need to display "Table of contents" with headings and corresponding page numbers .The page numbers for the headings need to be picked up at run time.But the "Table of contents" is in the second page whereas the headings appear in the later pages.So it is difficult to display the respective page numbers.Can anybody give me a solution for this.

Hi.
Perhaps you could try this.
In the main window: When you print out the heading you can get the page number you are currently on. Save that number in a table/structure for each header.
Then on the second page you could have a "Late processing" window and print your headers with the page numbers you have stored in your table/structure.
I think this will work, or at least give you a clue on how to do it.
BR
Niklas

InDesign Table of Contents won't display once exported to pdf

Hello,
I am creating user manuals using Indesign books with CS5. When I export the book, I can view everything perfectly. But when I open the same file from a different computer, I get a message saying:
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the pdf document to correct the problem."
And two pages are blank - the table of contents. If you hover the cursor over the blank pages, the cursor changes and indicates the hyperlinks, and the hyperlinks still work, but since you can't view the text it's not very helpful.
Both computers are using Acrobat 9.
Any ideas?

I systematically removed elements from the pages in turn and I think I've found the issue. I have a header/footer created in illustrator on the master pages for all the documents in the book, and when I remove it from the Table of Contents, it shows up just fine. Odd that it doesn't affect the other pages.
Thanks for your quick responses. Consider the problem solved.

Display of Table Of Contents, links, diagrams etc....

Hi,
My Table Of Contents and other stuffs like diagrams, links etc.... are not getting displayed properly in my Woord files and are being shown as below:
{ EMBED Visio.Drawing.11 } - this is for a Visio drawing that I have in a file.
{ TOC \o "2-3" \h \z \t "Heading 1,1,Heading 4,4" } - This is for Table Of Contents.
{ HYPERLINK "mailto:[email protected]" } - This is for a mail address that I have in my word file.
I want to remove all these and go back to the normal way of storing a Word file without any of the above ones.
Please advise how this can be changed back to normal viewing of Word files.
Thanks....Karthik.

Alt-F9 should display the field results rather than the field codes that you are currently seeing.
Peter Jamieson

Table of contents web part doesn't display all data

Hi,
We did a test migration from Sharepoint 2007 to SharePoint 2013. There is a Table of contents web part that is being used to display all of the team sites (more than 25). In the SharePoint 2013 version, the TOC web part is not displaying all of the sites.
Any ideas of how to make it show all?
thanks,
Sherazad

Hi Sherazad,
According to your description, my understanding is that you want to display all sites in the Table Of Content web part.
There is a limitation of the web part, the maximum number of the items displaying in the web part is 50. If you want to display more 50 items, you need to increase or remove the limitation. You need to go to the web.config file of the SharePpoint site, the
path is C:\inetpub\wwwroot\wss\VirtualDirectories\port number, then find all navigation providers, and add
DynamicChildLimit attribute to each one . More information, please refer to the link below:
http://praveenbattula.blogspot.in/2010/11/table-of-contents-web-part-remove-max.html
Note: before changing web.config, please make a backup for the file.
After the above, if your issue still exists, please open your site->Site Settings->Navigation, change the value from 20 to [whatever number you want to display] in the “Current Navigation”section. More information,
please refer to the link:
http://www.chaitumadala.com/2010/05/sharepoint-2010-table-of-contents.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Display Table contents using HTMLB...Urgent Help Plz...

Hello All,
Im working on EP SP14 and SQL Server 2000.
I have successfully established database connection.
I want to know how can I display Table contents using TableViewModel in HTMLB.
Please help.
Its urgent.
Awaiting Reply.
Thanks in advance,
Uday

See /thread/80270 [original link is broken]
(please stop crossposting every question into two forums; thanks in advance)

Table of contents displays incorrect title

Hi everyone, I'm using iBooks author for a class project...As I think you can see clearly in the screen shot attached, the Table of Contents (the large picture on the screen) has not updated to display the proper chapter title that I've entered in the chapter's title page (viewable on the left). This only happens for chapter 1, my other two chapters are correct in the TOC.
Any ideas?

Again...not working.
See the note that says
"Please add the image directly by clicking Insert Image (camera icon). We cannot accept linked or embedded images." ...?
That means save the original to your hard drive, then make a reply, tap the little camera icon, then find that compatible file, then add. Which version Safari on which OS X are you using?
See this?
...that's ampicillin.

DB Connect after BI 7 Upgrade - can extract but not display table contents

Hi,
After an upgrade from 3.1 non-unicode to BI 7 unicode on Windows OS, SQL Server 2005 DB, the DB Connect connection to another SQL Server 2005 database is still established and passes all checks. We are also able to load data from the datasources previously established. However if we right-click the source system -> additional functions -> Select Database Tables (3.x), list the tables/views, double-click a view known to contain data, click 'Display Table Contents' and nothing happens. We can run a load from the datasource connected to the same view.
I have seen one unanswered post with the same issue. If anyone else has come across this problem and has some suggestions, it would be appreciated.
Note we have checked the normal issues on the SQL user having created the views and don't believe this is an authorisation issue. There is no authorization issue posted in SU53.
Support pack level is 16 on Basis and 18 on BW.
Thank you,
Ken

Hi Ken,
The problem has happened in the past because fields in the table/view had lower case letters. This is not allowed. Please check the following documentation:
->http://help.sap.com/saphelp_bw320/helpdata/en/58/
54f9c1562d104c9465dabd816f3f24/frameset.htm
->Modeling ->Source System ->Transferring Data with DB Connect
     ->Requests to Database Tables and Database Views
        ->Naming conventions for fields
If the above is not the cause please check the note 512739 again to make sure everything is configured correctly:
Please make sure in particular that the section III (d) of the note entitled 'Authorizations and visible objects' has been correctly
followed.
Regards,
Des.

FM to display table contents

Hi all,
Is there any Fm that will display contents of transparent table. Right now i tried VIEW_MAINTENANCE_CALL but it is with tha maintemance menu I dont want that, i want to simply display table contents.
Regards
Nilesh

Hi
check the fun modules
CKML_F_GET_TABLECONTENTS
TRINT_DISPLAY_TABLE_CONTENTS
Reward points for useful Answers
Regards
Anji

Table of Contents displays in wrong order

I created and generated a Table of Contents, and am having a weird issue.   It's a 19-page document, and Table of Contents is set to display Headings 1 and 2. Everything went fine, except that on one page the Heading 1 on top of the page displays in the Table of Contents below the Heading 1 level below it - i.e., they're in the wrong order!
So, on the page its -
9       Text
10     Text
But on the Table of Contents it returns -
10     Text
9       Text
Any ideas about why it might be doing this?

It can't be! If "9. Text" and "10. Text" use the same list for auto-numbering and "10" is below "9" on the same page, Indesign can't generate such, unless you don't copy the numbering to the TOC and instead add numbering via TOC style. Check your TOC style settings.

Table of content, I want to display just the image for each chapter and the name of the chapter. my book is not landscape format but each time I draging a picture into a specific chapter it duplicate it to all chapters why?

table of content in a landscape orientation.
I want to have in my table of content only image and the name of the chapter which is each to do.
my problem when I am draging an image to each chapter it copied it to all chapter although I am marking only the specifc chapter.
why? how can i overcome it?

Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert

Table of Contents (.hhc) Not displaying in Web browser

Hi,
I have just upgraded Robohelp Version 7 to 9.0. I have table of contents(.hhc) in the left frame and "Updates_and_Revsions.htm" in the right frame. After my first TOC update in the Robohelp version 9.0, i am not able to see anything in my left frame. It is blank.
After basic research I was able to figure it out that .hhc was converted into XML file. Here is the code (I have long TOC so i am copying only first few). I am using internet explorer 7.0.
******Previous Code********
<html>

<object type="text/site properties">
<param name="FrameName" value="right">
<param name="SiteType" value="toc">
<param name="Window Styles" value="0x800003">
</object>
<ul>
<li><object type="text/sitemap">
 <param name="Name" value="DFC On-Line Help Contents">
</object>
<ul>
 <li><object type="text/sitemap">
 <param name="Name" value="Updates & Revisions">
 <param name="Local" value="Updates_and_Revisions.htm">
 </object>
</html>
*************New Code*************
<?xml version="1.0" encoding="utf-8"?>
<toc version="1.0">
 <properties framename="right" windowstyles="8388611">
 </properties>
 <item name="DFC On-Line Help Contents">
 <item name="Updates & Revisions" link="Updates_and_Revisions.htm">
 </item>
 <item name="Introduction">
 <item name="Introduction" link="DfcIntroduction.htm">
 </item>
 </item>
</toc>
Please advise,
I will really appreciate your help.

Can you give us some more information? Is the issue in your output? If so, what type of output is it? Is the problem just with one project - try creating a new one.

Trying to display tables reusing same code.

I'm probably being really naive but I just can't get this to work!
I have a display table class that will only display a one table when a button is pressed in a GUI. I want to use the same code again to display another table but pressing another button this time. ie: press "Table 1" button and the SQL query SELECT * FROM Customer should be used. Press "Table 2" Button and SQL query SELECT * FROM Order should be used. I have tried creating a constructor for this but it keeps coming up with errors. Please can you have a look at my code. The bits that don't work are commented out. I want to be able to just change the query that is used each time a different button is pressed.
Thanks in advance.
import java.sql.*;
import java.awt.*;
import javax.swing.*;
import java.util.*;
public class TableDisplay extends JFrame{
private Connection aConnection;
private JTable cusTable;
private String Query;
private String Title;
public TableDisplay() {
//public TableDisplay (String Query,String Title){
try {
DriverManager.registerDriver(new sun.jdbc.odbc.JdbcOdbcDriver());
aConnection = DriverManager.getConnection("jdbc:odbc:RelAlg", "", "");
catch (SQLException e) { System.exit(11);}
getTable();
setSize(450,150);
show();
private void getTable(){
Statement aStatement;
ResultSet aSet;
try{
aStatement = aConnection.createStatement();
aSet = aStatement.executeQuery("SELECT * FROM RelAlgCustomerTable");
//aSet = aStatement.executeQuery(Query);
displayResultSet(aSet);
aStatement.close();
catch (SQLException e) { System.exit(12);}
private void displayResultSet(ResultSet rs)
throws SQLException{
//position to first record
boolean moreRecords = rs.next();
//if there is no records display a message
if(!moreRecords){
JOptionPane.showMessageDialog(this, "ResultSet unable to find table");
setTitle("No table to display");
return;
setTitle("Customer Table");
// setTitle(Title);
Vector columnHeads = new Vector();
Vector rows = new Vector();
try{
//get column heads
ResultSetMetaData rsmd = rs.getMetaData();
for(int i = 1;i <= rsmd.getColumnCount();i++)
columnHeads.addElement(rsmd.getCatalogName(i));
//get row data
do{
rows.addElement(getNextRow(rs,rsmd));
while (rs.next());
//display tabel with ResultSet contents
cusTable = new JTable(rows, columnHeads);
JScrollPane scroller = new JScrollPane(cusTable);
getContentPane().add(scroller,BorderLayout.CENTER);
validate();
catch (SQLException e) { System.exit(13);}
private Vector getNextRow(ResultSet rs, ResultSetMetaData rsmd)
throws SQLException {
Vector currentRow = new Vector();
for (int i = 1; i<=rsmd.getColumnCount();++i)
switch(rsmd.getColumnType(i)){
case Types.VARCHAR:
currentRow.addElement(rs.getString(i));
break;
case Types.INTEGER:
currentRow.addElement(new Long(rs.getLong(i)));
break;
default:
System.out.println("Type was:" +rsmd.getColumnTypeName(i));
return currentRow;
public void shutDown(){
try{
aConnection.close();
catch (SQLException e) { System.exit(14);}
public static void main(String args []){
final TableDisplay app = new TableDisplay();
This is the code from the gui that displays the table on the press of the table button
void table1_mouseClicked(MouseEvent e) {
TableDisplay tDisp = new TableDisplay();
tDisp.show();
}

what errors are you getting?
Where are you passing in the value for "Query" and assigning it to the class variable of the same name?
do this in the constructor:
public TableDisplay (String Query,String Title){
/////new line
this.Query = Query;
////end new line
try {
DriverManager.registerDriver(new sun.jdbc.odbc.JdbcOdbcDriver());
aConnection = DriverManager.getConnection("jdbc:odbc:RelAlg", "", "");
}

How do I add a table of contents to a PDF document created through iBooks?

I've been working on a iBook for a while for work and it functions great on an iPad. However, when I publish it as a PDF there is no table of contents. Is there a way to have the table of contents displayed automatically for the book? I dont mind if it's just a table of contents list like in a Word document, but the PDF file is very difficult if it's over 800 pages with no table of contents.

Update on what I did:
So instead of having an automatically generated template, I created a table of contents for each section on the chapter title slide. This table has 3 columns, Section, Topic and Page and then I use that as a reference guide for users who only use the PDF version of the document. There is no way to have interactive reference links in table elements in iBook but it suits the purpose well.

How can I change the paragraph style of the Table of Contents entries themselves?

From what I can see, all Table of Contents entries are the same font, size, indentation and layout when the book is viewed in Portrait mode on an iPad. I have long subheadings in my Table of Contents, and they get truncated!
How can I modify the style definition of the TOC entries themselves so that they will display in a smaller font size with less indenting, etc.?

Modifying the TOC: http://support.apple.com/kb/PH2752?viewlocale=en_US
Have you tried altering the style of the default items on the TOC page?

Displaying table of contents

Similar Messages

Maybe you are looking for