Displaying terms and Conditions during request

Hi ,
We have a requirement to display very long text (ready only) to requestor in the request form. Text could span multiple pages. So it need option to scroll.
We thought of two ways to present it
1.     Display the content directly in the request form
2.     Provide a link to the contents in the request form and keep the contents in an external page
We could not figure out a way to implement above options.
Please let us know if you have done similar work.

Hi Sidharath
You can think of the following option:
Create a checkbox [I Agree] on the request template which is mandatory for the requestor to proceed.
Just before this you can display an Image with the Terms&Conditions URL:<Provide the URL for the static content here>. and also the description about how to access the URL in the image.
This may not seem clean, because user should manually copy this URL in the browser.
Regards
user12841694

Similar Messages

  • Firefox 4.0.1 (or 5.0) will not display "Terms and Conditions" link content - online registration site, why? (Note Firefox 3.6.18 will).

    Hi,
    At the "URL of affected site", below, the "Terms and Conditions" link will not work on machine1 with Firefox 4.0.1, cookies and caches cleared (I clear "temp" directories too). I updated to Firefox 5.0, the "Terms and Conditions" link still won't work.
    Note that other 'pop up' windows encountered while navigating through the parts look up function (i.e. http://www.fordparts.com/Default.aspx#tabs-2) on that site appear to work fine, with or without pop up windows enabled, in this install of Firefox 4.0.1.
    As a sanity check, I tried the link on machine2, which uses Firefox 4.0.1 also, Windows XP. The "Terms and Conditions" link will not work there either.
    I tried the link on a third machine, with Firefox 3.6.16, also Windows XP, and the "Terms and Conditions" link *does* work there.
    So this would seem to be an incompatibility with Firefox 4.0.1 and/or 5.0. Any ideas [besides regressing back to Firefox 3.6.16 :) ].?
    Regards,

    No errors in error console. No effect using *. I tried using the dns name of my localhost both in the Firefox URL and in the javascript and I get exactly the same. I have spent a huge amount of time looking into this issue.
    One thing I noticed is that if I use the examples on the internet (http://arunranga.com/examples/access-control/preflightInvocation.html or http://saltybeagle.com/cors/) they work in the same browser. These examples however, are accessed through HTTP proxies.
    I am wondering if the issue has to do with using the same hostname just with different ports.

  • Terms and conditions not getting displayed on the last page

    Hi All,
    I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
    Can you please help me how to make the terms and conditions get printed on the back side of the last page.
    Thanks,

    I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
    I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
    If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
    In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

  • Purchase order terms and conditions in french

    Hi,
    i want purchase order terms and conditions in print preview to appear in french.I added that graphic and added conditions also.I maintained material and vendor in french language still it is not displaying terms and conditions in french.How tomake this to appear in french?Is it related to MM config or basis issue.?

    hi
    take help of abaper for this
    and if u need print whole  po  in french then in messages for condition type neu maintain language as french
    regards
    kunal

  • HT4623 My iPad stuck during downloading ios 7 at the stage Terms and condition I click agree.ipad not responding

    My iPad stuck during downloading ios 7 at the stage terms and condition when I agree no response

    Reset the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen.

  • I updated my Iphone 5 to iOS7 but during setup when i agree to 'Terms and Conditions', its not going to any other screen, it seems as if its going in some infinite loop. Please assist what to do in that case ?

    I updated my Iphone 5 to iOS7 but during setup when i agree to 'Terms and Conditions', its not going to any other screen, it seems as if its going in some infinite loop. Please assist what to do in that case ?

    I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

  • Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7

    Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7.

    It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
    You can get it here:
    http://gimp-print.sourceforge.net/
    You can download the latest version from here:
    http://sourceforge.net/projects/gimp-print/
    Have you downloaded the recent Apple update to Epson drivers?
    http://support.apple.com/kb/DL1398

  • Terms and Conditions to display in the last page of Script

    Hi Experts,
    My requirement is to print the Terms and Conditions in the Last Page of a PO. so for that, I have created one LAST page. Previously i have FIRST Page and Next Page in the Script. In the LAST Page it has to windows. One is for Logo and another one is for Terms and Conditions. I am trying to print to Terms and Conditions through a Standard Text ( Created in SO10) in the Terms and Conditions window.
    The page flow are like FIRST-->NEXT, NEXT>LAST, LAST---->LAST
    Please guide me how shall i proceed to get the output. It would be better if we get the output with out doing any change to the driver program.
    Thanks,
    Priyabrata

    Dear Priyabrata
    The page flow should  like FIRST-->NEXT, NEXT>NEXT, LAST---->
    And call your page in main window at last element.
    This will surely solve your problem.
    Regards,
    Vijay

  • Icloud terms and conditions not displaying

    iCloud keeps asking me to either View or Not Now the Terms and Conditions for iCloud, but when I select View. the app just takes me to the settings area for iCloud? How do I either accept the Ts and Cs or stop this re-occurring?

    Hi Snapperhead
    I might have found a solution to your problem in another discussion as it solved my problem.
    Go to Settings>General>Region Format to correct your area. In my case though I'm located in Canada, it said United States & after correcting my area I'm up & running again now.
    Hope this helps, Todd

  • HT4623 During the update my ipad froze at the terms and conditions page. HELP!

    While updating to IOS 7, my Ipad froze at the Terms and Conditions page. Help!

    Reset iPad and try again.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • How to approve iCloud terms and conditions in iOS7?

    I just loaded iOS7 on my iPad 2, went through the set-up, and synched with my iMac as I always do. Then on using the iPad it keeps asking me to approve the iCloud terms and conditions. when I click on "view terms" it takes me to the Settings iCloud screen, where i can't view or accept terms. Meanwhile the iCloud features like mail are not working (though they are turned on in settings).
    Can anyone offer help? Thanks

    I had the same problem (repeated "accept iCloud terms and conditions") on my iPhone 4s when I upgraded to 7.0.3, but my iPhone 4 and the two iPads worked fine. There were two other problems that might be connected. One was a frequent request to sign into iCloud and the other was an "iCloud keychain error" when I tried to turn on the iCloud keychain in settings. The "Find My Friends" trick did not work.
    I was able to get some improvement by Restoring my iPhone from the iTunes backup (to my computer) created during the upgrade process. This allowed me to start the iPhone set-up process again. With this done I no longer was bothered by the frequent "accept..." and the frequent requests to sign into iCloud. I still have the "iCloud keychain error" problem.
    Now how do I fix that?

  • How to change the text of Terms and Condition of PO.

    I have given an task to add some text to the current TERMS and CONDITIONS (T&C) of a PO. Idea is to decrease the size of fonts also as after adding the new paragraph, the T&C itself will print on 2 pages. So decrease in font size is needed to fit the T&C on one page.
    Kindly tell me how I can add text to T&C of PO and also decreasing the size of fonts
    Thanks,
    mini

    yes SO10 wont ask for the CTS.
    Please follow this steps.
    Run the report RSTXSCRP
    Please fill the selection screen.
    the name of the text should be in this fiels, Text key - name
    Hit execute
    The required should be selected and hit enter
    Push the push button on the top left - Trsfr texts to corr
    It will ask for a request.
    You will get the CTS and then move ahead.
    Shreekant

  • Terms and Conditions change on 10/15/2014 negatively affecting people with multiple Apple IDs

    I have two Apple IDs and purchased songs and videos through iTunes using both IDs.  Apparently, Apple has changed the Terms and Conditions for iTunes presumably at 12:01am on 10/15/2014.  The most notable change affecting me is related to people with more than one Apple ID.  I downloaded some songs on 10/14/2014 from the iCloud to my MacBook Pro which had been purchased a long time ago with my first Apple ID.  Early the morning of 10/15/2014, I tried to download songs and videos from the cloud to my MacBook Pro this time using a different Apple ID.  When I clicked on the cloud icon by the song or video in iTunes for Mac, I received a pop up message in iTunes stating that I can download past purchases on this computer with just one Apple ID every 90 days.  It continues by saying that my computer can be used to download past purchases with a different Apple ID that user cannot download purchases made using a different Apple ID in 90 days.
    I have a real problem with this change in Terms and Conditions because Apple is telling me that I'm not allowed to have access to purchases I made until 90 days have passed.  These purchases were made prior to Apple's most recent change made to their Terms and Conditions, so they have retroactively restricted my use of media that I purchased legitimately.  I've posted on the support page because I would like to have Apple respond to my post and explain their rationale behind making this change.  Apple?  the floor is yours.

    Ed.  Thanks for your response.  I made the assumption that the 90 day restriction had just been put into place because I was working with Apple support earlier on the 14th and was attempting to download content from my original Apple ID so I could back up everything to my computer and overcome the issue caused by having two Apple IDs.  During the support call, I was able to log in to iTunes and download previous purchases from the cloud for both of my Apple IDs.  When I attempted to do so early this morning, I received the message described above when I logged in to my primary Apple ID and attempted to download the songs I ran out of time to download while on the phone with Apple support.  Thanks for the clarification about the policy.
    The goal of the Apple support person was to overcome the problem of having two Apple IDs.  It would be terrific if Apple came up with a solution for this problem as they have customers like me that would very much like to consolidate all of their purchases under one Apple ID.  Restricting access to legitimate purchases for 90 days is a pretty terrible policy to inflict on people that have paid for the use of these songs and videos.
    I have to give you a hard time about part of your answer (in good fun).  Your answer could be summarized as saying "The best solution to your problem is not to have your problem in the first place."  What it means is that the problem is a legitimate problem that doesn't have a good solution.

  • How to print the Terms and Condition page ine the sap-script

    Hi experts,
                             i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages)  i have called the hard coded text(i.e so10 text), but when i am displaying the output  data get printed in the first page but i am getting the second page heading on the top of  the terms and condiions page. In all the three pages i  have the same main window, if i  make change in any window i will affect all the other main  windows.  so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
    like this i have called in the MAIN WINDOW
    /E : LAST ( IN ALL THREE PAGES)
           INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
    IN THE TCODE SO10
    NEW PAGE TERMS.
    1) TERM MS AND CONDITONS  TEXT.................................................
    FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

    Hi,
    1. Create a new page by Name : LAST
    2. Identify the text element which will be the last element in the form in the debug mode.
    Mostly Ex: SUM, TOTAL, LAST etc.,
    3. the page linking should be
    First --> Next
    Next --> Next
    4. In the Text element identified in the step 3.
    Write the following code
    /: NEW PAGE  LAST
    /: INCLUDE the standard text created for the terms and conditions in SO10
    Check the syntax for the command but the logic will be the same.
    It should resolve your problem.

  • How to change the content of GTC (terms and conditions) for Partner

    Hi all,
         We are using R/3 version of ISA B2B site. while creating order thru Shopping Basket we have requirement that We need to provide GTC (General Terms and Condions) for the Partner (View GTC link ).  Right now some default text is displayed in that window (text text text ext text text text text text like that). we need to change this.
    where i can change this text and enter our own terms and conditions.
    Please help me to resolve this,
    thanks in advance
    siva kumar

    Hi Siva,
    the GTC is shown in the JSP b2c/order/terms_and_conditions.jsp. If you have a look at the file, you will find the following code:
    <isa:translate key="b2c.order.termsAndConds.txt.dmy"/>
    The translate tag will render the language dependant text for the resource key "b2c.order.termsAndConds.txt.dmy". To change the content that is shown you can change the resource text or create your own resource key in the corresponding resource file. The resource files are located in the src-folder of the web application DC.
    Best Regards,
    Peter Kraus
    SAP Web Channel Consultant
    http://www.leonardo-it.com

Maybe you are looking for

  • How to pass the values to stored proc using presentation variable in OBIEE

    Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1 There are 6 reports say 'A','B','C','D','E','F' in the same subject area. The reports are being configured with prompts using either the repository/presentation variables. One of the

  • Intensity II unlock problem

    I have two Intensity II phones and they both unlock when either of the two soft keys at the left side of the screen are touched.  Because of this I can not put this phone in my pocket or it unlocks.  Does anybody else have this problem? How do I disa

  • Dreamweaver CS6 won't install

    I tried to install DW from the Creative cloud through the download manager, as well as the trial version. Both DW installations stop at 15%. What might be the problem? I have Sophos antivirus running which I can't deactivate as long as my computer is

  • SKIP blank record

    Hi, Is there a way we can skip records with blank values while loading data into BPC. I have a data extract in which some dimension values are blank and it's a requirement to skip these records. In the conversion file I tried this formula, basically

  • HP Office Jet Pro 8500A e-All-In-One

    I have the above printer and use it wirelessly via AT&T router with Mac products. I have the most trouble with iPhones and getting "No Air Printer Found" error message if we haven't printed anything in several days. I can remedy this by turning the p