Displaying the process id

I'm having some problems getting the process id to display for the current process. I'm using netbeans 4.0 with JDK 5.0 as my interface. I'm working on a simple program for a class and this is the only portion that I can't seem to figure out how to complete.
Can anyone give me some directions?
Thank you

there are some features that won't work with caller ID on tv, so I think that is distinctive ring, and I think they sometimes have problems doing caller ID on tv if you brought your number from another provider. you may want to double check by opening a live chat or calling them at 1 800 VERIZON.
it's generally available for all customers, but there are a couple issues like described above.

Similar Messages

How can I display the Process Level by Phase in a Grid or Data Form?

We are using phased submissions. I can see that changing the display options on a grid will show the current Process Level for the processing unit defined by the POV. But how can we break this down by phase?

Try what is suggested in Page 243 of the User's Guide:
You can display multiple submission phases, view review level status, and perform process management actions for multiple phases in Process Control.
If you select Single period view, you can select one or more submission phases to include in the columns. For each column, you can display one or more of these options: Calculation Status, Journals, Review Level, Pass/Fail, and Validation. If selected, Review Level, Pass/Fail, and Validation are included for each phase. Since Calculation Status and Journals apply to the entire processing unit, they are displayed only once regardless of how many phases are selected. If you select All period view, you can select Calculation Status or Review Level information for the columns. If you select Review Level information, you should select one submission phase
for display. When you select All periods, or Tree for the display, the filter option is unavailable.
Here is the options:
!http://0ue0ag.blu.livefilestore.com/y1pceBZ2nCvU8wYKj38bzK_O3B8eXo5XwfxwTkVeMdPu1fi6lHT_DcYrxlptGHYDm6N4lA0H2YMnWx4qtcOe4ttmM-Em-fheg5P/Phase%20Submission.jpg!
And the Result:
!http://0ue0ag.blu.livefilestore.com/y1pWfMkCFrViEuCRyAHWCphl7y0gZBAK3UY1f2ECi1kme3_xP2FQjyG5f4TC7QHwoHPxBSb0GTKpyU6TXMSp9P5wR5LbJeYl5eu/Phase%20Submission2.jpg!

Invoices are not getting displayed in the process receivables for a cust.

Dear All.
Collection Management
I have a situation here in prod environment the worklist is displaying the customer and his outstanding balances/all the data when we select that customer and go for process receivables then i cant find any invoices/documents under the invoices tab.
But we have the open invoices in AR for that particular customer, I am wondering how the invoices will get deleted
Can some one help me in this issue..
Thank you,
D vasanth

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

In the process of shutting off, my iPhone 3 froze. The little scrolling circle just keeps displaying. I can't get it to connect ot iTunes or to my charger. So far, nothing I have done has changed anything.

In the process of shutting off, my iPhone 3 froze. The little scrolling circle just keep displaying. I cannot get it to connect to itunes or the charger. Has anyone else had this problem? And how did you solve it?

Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

How can I display SQL%ROWCOUNT in the "Process Success Message"

Hi all;
I am trying to display SQL%ROWCOUNT in the "Process Success Message" of a custom update Process.
Any ideas?

Chris,
I assume,
ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID );
is a package / procedure you call to do something. Change the procedure and add an
out parameter to it, which will get the
SQL%ROWCOUNT
value. Then, call this package like this:
DECLARE
in_DEPARTMENT_UID NUMBER;
BEGIN
in_DEPARTMENT_UID := :P4_DEPARTMENT_UID;
ORDER_ITEM_LOAD.MERGE_INTELLI_LABS ( in_DEPARTMENT_UID, :P4_ROW_COUNT );
END;Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

In sales stage combobox how to display the step of the process coach

On the business talk page, in sales stage combobox how to display the step of the process coach and can be selected, not only sale stage?
thank you.

For example, in salesprocess list, there are SystemSaleProcess, RenewalSalesProcess and DefaultSalesProcess.
And SystemSaleProcess includes grasp of the situation, the first proposal, estimate submitting, the second proposal 4 salesstages.
And grasp of the situation, including needs confirmation, background of the case confirmed, current problem confirmation, schedule and estimate confirmations, current system configuration confirmation 5 steps.
Now in deal page, the deal type selected SystemSaleProcess, the salesstage is grasp of the situation, the first proposal, estimate submitting, the second proposal 4 salesstage can be selected in the salesstage drop-down box.
But if want to choose more than salesstage, would like to choose needs confirmation, background of the case confirmed, current problem confirmation, schedule and estimate confirmations, current system configuration confirmation 5 steps in the salesstage drop-down box, then how to do it?
thank you.

Some times the logs not display in process chains

Some times the logs not display in process chains then how could we find them??

If you are in Tcode RSPC and opened your process chain you are able to click on the Logs icon. It will prompt you for a date selection.
If this still doesn't work you might have forgotton to activate and schedule your process chain. Before you activate check that your start variant is set to Direct scheduling by double clicking on the start variant.
hope this helps.
Cheers,
Andrew van Schooneveld
(assign points if useful)

I have a version 1 iPad. I would like to be able to use my LCD projector to display content to my students. I have the dongle to attach to the projector, but can't make it work. The process DOES work with my friend's iPad 2. Any advice? Thanks!

I have a version 1 iPad. I would like to be able to use my LCD projector to display content to my students. I have the dongle to attach to the projector, but can't make it work. The process DOES work with my friend's iPad 2. Any advice? Thanks!

Expanding on what deggie said, with an iPad 1 the app you're using must support video out. Only the iPad 2 can mirror the screen. The apps included with the iPad that output to external monitors are given here:
http://support.apple.com/kb/HT4108
For third-party apps, consult the app's documentation or contact the developer.
Regards.

HT201210 Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Does anyone recom

Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Can anyone recomend a fix?
Thank you

There is only one fix now. The message on the screen means that you have to restore the iOS software on the iPad now. Read the part at the very end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple
About the error code.....
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
If needed.....
Additional Information
If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again.

Displaying the image from camera after processing

Hi,
Using NI vision assistant I captured the image from the camera in continous mode with inline processing. Then the image was proceesed (filter,threshold and particle analysis), then I created a bounding box and integrated that with the real time video. But, the image viewer is displaying the image in binary form rather than in RGB space.
I can't find any mistake.
Please help.
Thank you.

Hi illuminator,
Can you post your VI and provide some more information?
Thanks as kudos only

You are not authorized to display the data transfer process

Dear Experts,
Good Morning!
I want to that I am getting one Message no. RSM906:"You are not authorized to display the data transfer process
".What does it mean .I want to load the data in the 0SD_C03 cube ,can able to load upto PSA but unable to create the DTP.IS this because of this messege of authorization or some other reason ,Request you to please suggest me for this issue ,thanks in advance .

Hi,
You may not have authorisation for S&D cubes, so i feel it is an authorisation issue, kindly take one of your colleagues id to check this, if it is working for them, then i think you have to add those to roles to your ID..
Still there is a option to override this, but you have debug it once, and change the authorisation code(sy-subrc) value, and please dont try this if you are not familiar at ABAP, and this is not adviceable if it is an authorisation issue as there will be logs recorded for all the things you are doing and oreover each time when u click on DTP you have debug it to change the authorisation
code..
Note: If it is QA or Dev system you can try debugging it, but if it is production system then i think u have to use an alternate ID...
Regards,
Nanda.S

Hi.. I am reinstalling ios on macbook. While doing process, it asks for the Apple id and password. I am providing the id but it displays the message that apple user id has not been used with apple store... what shall I do to make my id work. Please assist

Hi.. I am reinstalling ios on macbook.
While doing process, it asks for the Apple id and password. I am providing the id/password but it displays the message that apple user id has not been used with apple store... what shall I do to make my id work. Please assist

Just to clarify, iOS is the operating system for iOS based devices such as the iPod touch, iPhone, and iPad.
Your Mac runs on OS X.
As for your Apple ID, help here > Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store

How to configure GP to display the current process initiator

Hi all,
In EP, I also create this Applicant Group, and assign all the respective users to the group.
In GP, I have the ROLE - Applicant which I assigned the Applicant Group (from EP), to work on the Submit block in the Timeoff process. I have also assigned the Owner and overseer to this Applicant role.
I defined the Applicant role as initiator in the GP Role tab.
During the runtime, in the Main data of the process, it list down all the users belongs to the Applicant role.
What should I do so as to display the active initiator only?
Can advise?
Thank you.

you have to use trinidad-config.xml.. and mention
<right-to-left>
http://download.oracle.com/docs/cd/E15051_01/web.1111/b31973/ap_config.htm
chk for righttoleft

I updated to V4 but firefox will no longer open when I click on the icon. I can see that the process has started, but there is no browser display. Stopping the process and trying again does not work. Please advise

Prior to updating to V4, firefox worked perfectly with all my existing applications. After I updated it will not launch a browser page, even though the process is shown to be operable in the Task Manager. The same problem occurs on start-up of my computer, so there are no previous processes running.
I cannot launch the broswer at all so cannot try clearing the cache etc or other suggested troubleshooting solutions.

In the Task Manager, make sure to check both the Applications tab and the Processes tab. On the Processes tab, Firefox may have two different components running: firefox.exe and plugin-container.exe. Well, in 3.5.11, it would be only the first one.

Disk Utility: after creating the .DMG (compressed image) When "scan image for restore" finishes it displays "unable to scan (internal error)". Since the process was scanning for about 1 hr is this a fake warning?

External 500GB drive is partitioned with 400GB for Mac OS extended (journalling) and 2nd partition formatted today as "ExFAT".
Yesterday I tried to create a disk image of my HD to no avail - this was compressed on a FAT partition. I got a warning after running the <scan image for restore> saying "unable to scan (internal error)"
I rang Apple support who suggested formatting a partition as MAC OS extended (journalling) and choose to save the image as "read/write'. The image process stopped writing at about 200GB and then the file size jumped to 499GB (ie the size of the HD). But the process did nothing for about an hour so I foce quit disk utility (as suggested by apple support)
My current attempt was to format the external drive again; this time with a 400GB Mac OS extended (journal) format; plus a 100GB ExFAT format partition. The new image was created after about 2.5hrs with a compressed size of 149GB. However, after running the "scan image for restore" facility I got the warning message "unable to scan filename " (internal error). The process was scanning the image file according to the progress bar - this took about hour - thus the warning is a puzzle.
If anyone can say more about this error I would really appreciate knowing tips for using disk utility. The screen grab is below.
"unable to scan filename " (internal error)
thanks

Thanks for a quick reply <baltwo>. You’ve answered that it is not a fake message!
fyi: I thought that I would use my external Buffalo for two purposes; namely the smaller ExFAT partition for copying stuff to my win7 netbook. The larger partition was to be used as my imac image of SL. So this was my first attempt at using disk utility - the idea being to hold an image backup at another location. Plus I now have the Lion thumbdrive ready to upgrade from SL and so being cautious wanted to have a SL image backup
Anyway I followed the apple instructions using my mac 10.6.3 install DVD but it would appear from other discussions that <unable to scan (internal error)> is not unique to me.
I’ll get back to apple telephone support for further advice.
I would though be grateful for an “idiots’ guide to making an image backup of my internal HD that runs SL 10.6.8
eg should I have just one partition on the external USB drive? format it as Mac OS extended? create the image as compressed or read/write? Basically I’ll do whatever will work!!
thanks again

Displaying the process id

Similar Messages

Maybe you are looking for