Displaying unique identifier.

Hi,
Is there any chance to display the step unique identifier instead of or in addition to the step name?
How to display that unique identifier in the sequence editor?
K.
Solved!
Go to Solution.

Hi
I cannot find a way of changing the step name to the unique identifier. The step name is a string and you cannot out an expression in that field so it doesn't seem possible to display the unique identifier.
You can access the unique step ID by using the following expression:
http://zone.ni.com/reference/en-XX/help/370052G-01/tsapiref/reftopics/step_uniquestepid_p/
I hope this helps. Let me know if you need anymore information
Thanks
Beejal S
NI UK & Ireland

Similar Messages

Help with Oracle Streams. How to uniquely identify LCRs in queue?

We are using strems for data replication in our shop.
When an error occours in our processing procedures, the LCR is moved to the error queue.
The problem we are facing is we don't know how to uniquely identify LCRs in that queue, so we can run them again when we think the error is corrected.
LCRs contain SCN, but as I understand it, the SCN is not unique.
What is the easy way to keep track of LCRs? Any information is helpful.
Thanks

Hi,
When you correct the data,you would have to execute the failed transaction in order.
To see what information the apply process has tried to apply, you have to print that LCR. Depending on the size (MESSAGE_COUNT) of the transaction that has failed, it could be interesting to print the whole transaction or a single LCR.
To do this print you can make use of procedures print_transaction, print_errors, print_lcr and print_any documented on :
Oracle Streams Concepts and Administration
Chapter - Monitoring Streams Apply Processes
     Section - Displaying Detailed Information About Apply Errors
These procedures are also available through Note 405541.1 - Procedure to Print LCRs
To print the whole transaction, you can use print_transaction procedure, to print the error on the error queue you can use procedure print_errors and to print a single_transaction you can do it as follows:
SET SERVEROUTPUT ON;
DECLARE
   lcr SYS.AnyData;
BEGIN
    lcr := DBMS_APPLY_ADM.GET_ERROR_MESSAGE
                (<MESSAGE_NUMBER>, <LOCAL_TRANSACTION_ID>);
    print_lcr(lcr);
END;
Thanks

The Group Policy Client service failed the sign-in The universal unique identifier (UUID) type is not supported

Hi guys,
we created a custom WIM Image (Windows 8 Enterprise) with MDT 2012.
Sysprept the Image, Deployed via SCCM 2012 SP1.
Computers are Domainjoined. Error with standard Domain User.
On some computers (not every computer) and not with every user on the first logon following error message arises:
The Group Policy Client service failed the sign-in The universal unique identifier (UUID) type is not supported
It works, when you log in a second time but this error isn't very nice.
Is there a solution for that?
Kind Regards
Martin

Hi,
The service is responsible for applying settings configured by administrators for the computer and users through the Group Policy component. This issue can be caused by various reasons based on the computer environment.
Can you find any information in event log about this issue?
Here is the related blog in which the steps can solve most of such issues if the issue continuously happen.
http://blogs.msdn.com/b/moiqubal/archive/2012/03/04/how-to-fix-quot-the-group-policy-client-service-failed-the-logon-access-denied-quot-error.aspx
Also, you can refer to the similar thread about this issue:
http://social.technet.microsoft.com/Forums/en-US/4a644219-50ee-494d-b965-e64a8555109e/the-group-policy-client-service-failed-the-signin-the-universal-unique-identifier-uuid-type-is
Since this issue can be related to SCCM, to better help you, please submit a new thread for further help:
https://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
Hope these could be helpful.
Kate Li
TechNet Community Support

Can I use MachineID.getBytes() or MachineID.getUniqueID() as a unique identifier?

The bytes from MachineID.getBytes() are not to be treated as a unique identifier for a device. It is unique, but is volatile and not suitable to be used as an identifier. There are various system/hardware events which can cause the MachineID bytes to change over time. The same rule applies to MachineID.getUniqueID(). If you do .getBytes() and then compare that to AnotherMachineID.getBytes(), even though they can be the same device (but different runtime or browser), you will get a "false" if you're doing a direct byte-by-byte comparison. This is because during the device individualization process, the device's hardware attributes are interrogated to get a hardware "fingerprint" of the device. This is stored as a data structure in the MachineID data structure.
The only resilient way (with limtiations, as stated in the next section) to compare to different devices to determine if they are the same device is to use MachineID.matches(). That comparison is resilient against machine hardware upgrades (changing hard drives, upgrading your video card, upgrading your CPU, reformatting your machine, changing user accounts, using different browsers, etc…).
(NOTE): There are 2 known limitations to using MachineID.matches():
1. MachineID in the Chrome browser (on any platform) a randomly-generated ID string that is not tied to the hardware. The reason for this is that with the release of Chrome Version 28 browser introduced a sandbox, where code in the browser is not allowed to communicate directly with the hardware layer. This will cause .matches() to fail if comparing a MachineID from Chrome against a MachineID from Firefox, even from the same machine. This also means that if a user "resets Adobe Access DRM/Licenses", they will lose their ID, and it will be re-generated (as a new ID) the next time DRM content is consumed and their machine has to create a new MachineID.
2. A similar limitation applies to iOS devices running iOS7 and higher, as a sandbox was also introduced to that platform, preventing applications from directly accessing the hardware. If you are using iOS7 with a the Primetime Player SDK (PSDK) 1.0 or 1.1, the MachineID for all devices will be the same value, as Apple blocked the device-access APIs (which Adobe Access uses) and caused them to return a static string. Since all iOS7 devices will return the same string when the device hardware interrogation happens, all iOS7 devices using the the PSDK 1.1 or earlier will return true when MachineID.matches() is called. Adobe is working on a high-priority fix to this issue, which will be released in a PSDK 1.1 patch/hotfix, where another persistent API is used to bind the MachineID to the device, instead of the blocked device-access APIs. This new binding mechanism will be persistent across application uninstall/re-installs.
What is consistent between iOS7 and Chrome 28 (and higher), is that the MachineID will no longer be tied to the hardware attributes of the device.
cheers,
/Eric.

In case you would like to find some way to do something that requires concurrency monitoring (e.g. You run a service and wish to limit the # of devices that can access a your service), the best way to do this would be to move towards a "# of concurrent streams" model, similar to Netflix.
To do this, you can use Adobe Pass technology called Mai Tai, or implement your own technology (via cookies or authentication tokens) to limit user accounts to no more than XX concurrent streams.
cheers,
/Eric.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts if changes on all computers.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts it changes on all computers. I would like to change icon and name for each computer.

you would need to setup a VPN and tunnel into your office.
FYI..the default ports are 3283 and 5900.

Unique identifier in FBL3N

Hello,
Please could you tell me if it is possible to get a unique identifier in an FBL3N report? (I would want the unique identifier to remain unchanged for each line item if new line items are entered into SAP.)
(i.e. if staff write commentaries for each line item in an FBL3N report and then new line items are present in later FBL3N reports I want to be able to identify which line items in the new report each of our commentaries relate to).
Thanks,
Stu

Hi,
Please could you tell me whether accounting entry date is different to document date and posting date? My understanding is that the document date and posting dates can be manually set by the data entry clerk and therefore I can not guarantee that posting dates will always increase for each new line item (even then would I need to sort by time of day within each date to be sure the order of line items are in chronological order?) Is accounting entry date the date that the data is entered into SAP and not changeable by the user?
Unfortnately in this case it will be impractical to ask people to use unique text or header text fields.
If it is possible to sort by the date (and time) that data is 'physically' entered into SAP then we can be sure that any new line items will occur at the bottom of the report, irrespective of document date or posting date?
I assume an unique identifier just doesn't exist (without entering one manually)?
Many thanks,
Stewart

EDI 810 transaction error: Cannot uniquely identify a trading partner

Hi,
I am facing following error on B2B 11g version 11.1.1.6.0. Please provide the solution if you are aware of the issue.
Error Description: Cannot uniquely identify a trading partner. The trading partners PARTNER-A, PARTNER-B have the same set of identifications.
Partner Identification parameter for PARTNER-A and PARTNER-B
EDI Interchange ID: xxxx
EDI Interchange ID Qualifier: yyyy
EDI Group ID: 111
Name: PARTNER-A
EDI Interchange ID: xxxx
EDI Interchange ID Qualifier: yyyy
EDI Group ID: 111
Name: PARTNER-B
Thank you
Ram

Two TPs can not have same identification.
There are two ways to come out of this problem.
1. Change the identification criteria for the TP.
2. Use exchange level Identification for one TP.

[CS3][JS] Uniquely identifying documents with common names - possible?

Hi!
Is there no way to refer directly to a document in app.documents when there are several documents with the same name open at the same time (located in different folders)?
I have tried to assign unique labels to the documents when opening them, but have not succeeded in referring to documents by their labels, only by name - and the name not being unique, I get just one document reference (the first).
I also tried using the documents.itemByRange function, supposedly returning an array of all documents in the range defined by the parameters sent to the function. However, sending in the same name in the "from" and "to" parameters, returned only one document:
app.documents.itemByRange('test.indd', 'test.indd').getElements().length
Result: 1
//(I would have expected to get both of them)
// Referring directly by the name:
app.documents.item('test.indd').getElements().length
Result: 1
// Checking the name of the documents by their indexes:
app.documents.item(0).name
Result: test.indd
app.documents.item(1).name
Result: test.indd
Do you really have to loop through all open documents and check their fullName to be able to uniquely identify a document if the names are not unique?
Kind regards,
Andreas Jansson

Hi Dave,
Make that three or four... ;)
Kris at Rorohiko created a method to get unique references to two
different documents with the same name. It's usable if you have the free
APID ToolAssistant version 1.0.44 or higher. (it doesn't need to be
licensed...)
Here's an excerpt from the reference manual:
The get doc GUID function is used as follows:
guid =
app.callExtension(0x90B6C,10008,document);
This function returns a GUID (Globally Unique Identifier) for a
document. This is a string of the form
{nnnnnnnn-nnnn-nnnnnnnnnnnnnnnnnnnn}
where all 'n' stand for a hexadecimal digit.
These GUID allow you to work with same-name documents that
are concurrently open without getting tangled in the confusion
that occurs when using resolve calls.
As long as a document is not moved from its original location on
disk, it will keep the same GUID. Two documents with the same
name but different paths will have different GUID.
Opening, closing, (re)saving to the same location will NOT
change the GUID.
Moving a document to another location will change the GUID.
The find open doc by GUID function is used as follows:
doc = app.callExtension(0x90B6C,10009,guid);
This function retrieves a reference to an already open document
based on its GUID string.
These GUID strings are unique and persistent and allow
persistent references to same-name documents without resolvelike
issues (but the documents are meant to be 'unmovable' i.e.
they cannot be renamed or moved to another folder). Once the
document is open, it can be retrieved via its GUID.
HTH,
Harbs

No unique identifier in FCC

Hi Experts,
We have a requirement in SAP PI (7.31) where the flat file is picked from source and sent to Target.
FCC is used for conversion in the sender channel.
Incoming files has two header, with each header multiple line items under that.
The line item has dynamic value after "D".
Example :
H1
D12
D25
T1
H2
D45
D87
T2
Need inputs on how to proceed in case of no unique identifiers in FCC.
Thanks,
Pavi

Hi Pavi,
is H, D and T are present in the file?? If not you can use below FCC parameters in sender channel and handle it in the mapping.
<?xml version="1.0" encoding="utf-8"?>
<ns:FileSenderData xmlns:ns="urn:ch:test:prototype">
<RecordSet>
<Record>
<EachLine>H1</EachLine>
</Record>
<Record>
<EachLine>D12</EachLine>
</Record>
<Record>
<EachLine>D25</EachLine>
</Record>
<Record>
<EachLine>T1</EachLine>
</Record>
<Record>
<EachLine>H2</EachLine>
</Record>
<Record>
<EachLine>D45</EachLine>
</Record>
<Record>
<EachLine>D87</EachLine>
</Record>
<Record>
<EachLine>T2</EachLine>
</Record>
</RecordSet>
</ns:FileSenderData>
Regards,
Praveen.

How to create Unique Identifier and save it to identify user(device)

I want to create unique identifier on iOS 5 and use it for identifying user (user device) every time app is started. I am able to create a unique identifier by following code
CFUUIDRef theUUID = CFUUIDCreate(NULL);
CFStringRef string = CFUUIDCreateString(NULL, theUUID); CFRelease(theUUID);
But unable to save it on user device so that particular identifier is not deleted even when app is uninstalled. I tried using SSKeychain approach but it gives Apple Mach-o Linker error.
Please let me know the the way I can accomplish the same.
Any help is appreciated.

I want to create unique identifier on iOS 5 and use it for identifying user (user device) every time app is started. I am able to create a unique identifier by following code
CFUUIDRef theUUID = CFUUIDCreate(NULL);
CFStringRef string = CFUUIDCreateString(NULL, theUUID); CFRelease(theUUID);
But unable to save it on user device so that particular identifier is not deleted even when app is uninstalled. I tried using SSKeychain approach but it gives Apple Mach-o Linker error.
Please let me know the the way I can accomplish the same.
Any help is appreciated.

Query for how to display unique rows in a table

Can i have a query for displaying unique rows in a table.

use d query
select distinct col1,col2... from table ;

Unique Identifier in MDM Profisee Stage table

Hi team,
I am new to MDM profisee tool and currently working for Addres verification project for my organization.
I wanted to clear my doubts here about Unique Identifer in Stage table and how it works.. Here what i understand till now:
Step 1) I created an Entity using MDM profisee UI and it generated a stage table in MDS database called stg.Address_leaf
Step 2) I have loaded data from external source to MDS stage table using ETL and passed Import type as 2 and Import status id as 0
Step 3) I have run store procudure system generated something stg.udp_Address_leaf to load the model and passed the version name as Version_1, Log flag as '1' and Batch tag as 'Address'
Now my below are my questions:
1) What is the field i can use in MDS stage table to populate my unique intifier value coming from source? (lets say Address_Id is my Unique value for all the records coming from source)
2) Where/how Unique Identifier is useful in this process? Will this be helpful in next time load from stage to Model?
3) If i truncate and load my MDS stage table in next run and few earlier records has been updated how it will update those records in Model? will this process (code present in SP) recognize by Unique Identier column present in MDS stage table?
I may have few more questions on this process but wanted to start from here.
Thanks,
Akash

Thanks David for your reply.
So instead of i use Auto generate to populate Code attribute, i can load Code Attribute during loading the stage table with my source unique values.
And then later on, when i will have new updated values coming in for a member record, Stored procedure will use that code attribute value and update the model accrodingly for the changed values for the member?
i need to use Import type as 2 in this case.
Example:
I have existing record in MDS staging table let's say
Code, City, Zip, Import type, Import status
0001, Chicago,61000,2,0
In next load run, i first truncate the data from MDS staging and now i have updated row for existing code ‘0001’ where Zip code values changed from previous 61000 to 61001:
Code, City, Zip, Import type, Import status
0001, Chicago,61001,2,0
In this case, when we execute the SP, it will update the Zip code in Model using Code as unique indentifier. and no duplicates will occur.
Please correct me if i am wrong.
Thanks,
Akash

Problem using SQL-LOADER and Unique Identifiers

I'm trying to load a fixed-length records file containing people names and phone numbers. Data is specified as follows
Toni Tomas66666666669999999999
Jose Luis 33333333330000000000
Notice that a maximum of 2 numbers can follow a person name, and 0000000000 means "no number specified".
I want to assign a unique identifier to people (instead of using the NAME field as a Primary Key) using an Oracle Sequence. I did that, but I don't know
how to assign the same id to each number.
Considering the 2 previous lines, desired result should be:
PEOPLE
======
1     Toni Tomas
2     Jose Luis
TEL_NUMBERS
===========
1     6666666666
1     9999999999
2     3333333333
In order to achieve that, my Control File looks like this
LOAD DATA
INFILE phonenumbers.txt
INTO TABLE people
     personID "mySequenceName.nextval", --an Oracle sequence
     name POSITION(1:10) CHAR
INTO TABLE tel_numbers
WHEN phonenumber !='0000000000'
     personID !!!DON'T KNOW HOW TO REFERENCE THE SAME ID!!!!
     phonenumber POSITION(11:20) CHAR
INTO TABLE tel_numbers
WHEN phonenumber !='0000000000'
     personID !!!DON'T KNOW HOW TO REFERENCE THE SAME ID!!!!
     phonenumber POSITION(21:30) CHAR
I tried lots of things, but anyone works:
a) reference the ID using something like ":\"people.personID\" (or similar aproaches)
b) using a BEFORE INSERT TRIGGER getting the CURRVAL value of the Sequence. This solution
does not work because it seems that all people is loaded before any telephone number. Hence,
all phone numbers are associated, wrongly, to the last person in the data file.
Does anyone know how can I solve this issue?
Help would be appreciated. Thank you.

Hi V Garcia.
Information within the file is correct. Each line represents a COMPLETE record (Part of the line represents parent information and the rest is children data). As you can see in my first message, you can have more than one detail for a given master (i.e. two phone numbers):
Toni Tomas66666666669999999999
(10 chars for the name, 10 for each phone number. Thus, 2 children records to be created)
With the solution given by Sreekanth Reddy Bandi (use of CURRVALUE within the SQL-Loader Control File), not all the details are linked to the parent record on the DB tables. It seems SLQ-Loader gets crazy when there is such amount of information.

Unique identifier of Message

Which approach is better ?
Message-ID header or (IMAP, POP3 UID message) ?
How are you handle this problem in your applications ?
thanks

Use message UIDs (or persistent UIDs) for a client to resynchronize its state from a previous session with the server (e.g., disconnected or offline access). In this case, you might also need to couple your logic with UIDVALIDITY. Any change of unique identifiers between sessions can be detectable using the UIDVALIDITY.
On the other hand, Message ID is not mandatory in the message. For example, some of the messages that we download from yahoomail (or any other mail agent) might not have message Ids.
Therefore, always use UIDs if your job is to resync the client with the email servers.
Thanks
Subbaraja
http://www.subbarajas.blogspot.com/

Unique Identifier

I'm trying to embed a unique identifier, e.g., computer ID, EXCEL Serial #, Windows Serial #, etc. into an EXCEL workbook before I send it to the recipient. I'm trying to insure that only the recipient can use the spreadsheet?
Thanks!

Hi,
You may need post in Excel forum for more help:
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=excel
Alex Zhao
TechNet Community Support

Displaying unique identifier.

Similar Messages

Maybe you are looking for