Displayport or DVI .. ??

Hello all,
Not long ago I did buy myself a new Mac Mini and was wondering if it's usefull (or even better) to use the thunderbold/displayport connector instead of the HDMI connector?
Reason why I ask is that I own a Dell P2210 monitor (22" - 1680 x 1050) and this one also has a displayport connector.
(currently working on the DVI connector using the HDMI to DVI adapter)
Greetings,
Rene

It really won't matter at this point, because that connection supports monitors up to 1920 x 1600. It would only be beneficial to move, if it was larger than 24" or if you want to use the HDMI port for an HDMI TV.

Similar Messages

27: iMac Apple Mini DisplayPort to DVI adapter quits working post-firmware

I iMac Apple Mini DisplayPort to DVI adapter suddenly quit working after I installed Apple's latest iMac display firmware update. This is an Intel Core i5; the monitor is an LG Flatron 24" Wide, and when it powers up it says "no video input" and goes into power-saving mode. No amount of replugging cables helps, but the monitor works fine on other computers.
The Displays control panel just shows one monitor, and clicking Detect Displays does nothing.
I suspect Apple's Display Firmware Update. My installer log shows the following, but the problem only happened today after the latest update:
6/1/10 9:45 AM 27-inch iMac EFI Firmware Update 1.0
6/1/10 9:45 AM 27-inch iMac Display Update 1.0
6/4/10 11:47 AM 27-inch iMac SMC Firmware Update 1.0
6/4/10 11:47 AM 27-inch iMac Display Update 1.0
6/5/10 7:29 AM 27-inch iMac Display Update 1.0
I have automatic updates disabled, but after each update I would see more firmware updates ready, but caution leads me to never install more than one of these at a time, and then to wait a while to see if anything bad happens. The odd thing is that the Display Update 1.0 seems to have been installed three times in this course of events. Alas, there appears to be no way to uninstall a firmware update.
Here is the System Profiler Graphics/Displays output:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Display Connector:
Status: No Display Connected
It says the Mac sees no display connected, and the display gets no video signal. Since the adapter is an active device (it has powered electronics to convert DisplayPort signals to DVI signals) I suppose it could have just coincidentally died. But that seems unlikely given that the thing worked perfectly just before the last firmware update.
Does anybody have similar experience, or better yet, a fix?

Unfortunately the Apple Knowledge Base does not give much information about this update. Such has how to tell if it has been successfully installed. I suspect that because it keeps recurring in the install log that it has not been installed successfully as yet. Are you receiving this update through Software Update? Can you locate the installer for this update? It maybe located in Apps/Utilities.
Some firmware update installations can be interrupted/corrupted by attached devices. If you find the update's installer on your iMac, I suggest that you detach all external devices from the iMac, use an Apple USB keyboard & mouse if available, follow the instructions carefully and install the update manually. If you do not locate the installer I suggest downloading manually from the link below and installing it.
The Knowledge Base article mentions that your iMac should also have a Graphics Firmware Update. I suggest that you download and install that as well.
27-inch iMac Display Firmware Update 1.0
http://support.apple.com/kb/DL998
27-inch iMac Graphics Firmware Update 1.0
http://support.apple.com/kb/DL984
Dah•veed

Does Thunderbolt work with the Mini Displayport to DVI adapter?

I just ordered a new 13" MacBook Pro with Retina Display to replace my Mid-2010 15" MacBook Pro. I've been using the Mini Displayport to DVI adapter to extend my screen to an older 20" Cinema Display. From what I can find online, and I'm here asking for confirmation, I should still be able to use the Mini Displayport to DVI adapter with the new MacBook Pro's Thunderbolt port. Correct?

still be able to use the Mini Displayport to DVI adapter with the new MacBook Pro's Thunderbolt port. Correct?
Yes.

Trouble with 30" HD Cinema Display using Mini DisplayPort to DVI Adapter

I bought a new MacBook Pro and I am having trouble getting the full resolution to work with my 30" HD Cinema Display (purchased in 2007 max resolution 2560 x 1600) using a Mini DisplayPort to DVI Adapter.
According to the specs page, http://support.apple.com/kb/SP581 , the max resolution of the HD external display is supported. Unfortunately the max that I can set it to is: 1280 x 800
Has anyone else had the same issue?
If this isn't resolved I'm likely going to exchange my MacBook Pro for one that can support this display.

So I went and bought the Mini DisplayPort To Dual-Link DVI Adapter as suggested and it seems to work great.
Now the problem that I have is when I open up Apple's DVD player, the screen is blank but I can still hear audio.
If I unplug the display, the movie will display properly. Rebooting with the display plugged in doesn't help either. I also deleted all the DVD players enc setting files so that they would re-initialize but no luck.
Any idea what this problem might be??
Chipset Model: NVIDIA GeForce GT 330M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0a29
Revision ID: 0x00a2
ROM Revision: 3532
gMux Version: 1.9.22
Displays:
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Built-In: Yes
Cinema HD:
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Mini DisplayPort To Dual-Link DVI Adapter
Adapter Firmware Version: 1.03

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Does DVI-to-HDMI work with my Mini DisplayPort to DVI adapter?

Hi,
I have a Mini DisplayPort to DVI adapter and was wondering if I get a DVI-to-HDMI, will I be able to get HDMI output?
If yes, should I get any specific DVI-to-HDMI adapter?
If yes, will it have sound with it?
Thanks.

So which does the community prefer between Dr Bott DVIator and the Apple DVI to ADC? I have the Apple but it is not working, as it is shutting the monitor down without even starting it (soft shut-down). Is this a bad adapter or the result of "stacking" adapters? I have read that it is more common to a bad adapter result.
Thanks.

Have I power down Macbook and monitor (or TV) before connect (or disconnect) through Mini DisplayPort to DVI (or Mini DP to HDMI) Adapter?

Can I hot plug monitor (or TV) through Mini DisplayPort to DVI (or Mini DP to HDMI) Adapter? Or I have to power down all before connect/disconnect through Adapter?

Thank you, Mario.
I just wanted to be shure because previously i destroyed two videocards on my pc by plugging hdmi without power down.

Does Mini Displayport to DVI adapter support analog VGA signal?

I'm just about to buy a macbook pro. Since the MDP (mini displayport) to DVI and MDP to VGA adapters are £20 a pop, I can only afford to get one. Obviously DVI is better in general, but VGA supports more older hardware, CRTs, and the spare VGA input on one of my displays (where the desktop uses the DVI).
What I'd like to know is does the MDP to DVI adapter also support the analog VGA signal on certain pins (like most physical desktop DVI ports do)? If it does, since I have about 3 or 4 DVI to VGA adapters lying around, I can get the MDP to DVI adapter and use the DVI to VGA adapters with it if necessary, but if it doesn't I might be better off getting the MDP to VGA...

No. Unlike DVI, which in the DVI-I configuration has both digital and analog pinouts, DisplayPort (and mini-DisplayPort) are purely digital. Mini-DP to DVI then DVI to VGA will not work. If you look carefully at the Apple Mini-DisplayPort to DVI adapter, you'll notice it's a DVI-D connector - digital pins only.
The Apple mini-DisplayPort to VGA adapter contains a digital-to-analog converter.
So, you'll have to choose. If you want VGA, get Apple's mini-DisplayPort to VGA adapter.

Mini DisplayPort to DVI + DVI to VGA Display Adapter, will it work?

Hi,
I have a MBP, and I have just purchased an apple Mini DisplayPort to DVI adapter.
I want to connect it to a VGA port.
Can I buy an Apple DVI to VGA Display Adapter and connect it to the connector above.
Will that work? Any one with experience who could advise me on that?
Thanks.

This does not work, because the Mini DisplayPort to DVI adapter has a DVI-D port that transmits only digital signals. VGA uses analog signals.

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

Mini DisplayPort to DVI Adapter is actually DVI-D? *** Apple!

I just purchased a new MBP (and I love it), along with an Apple Mini DisplayPort to DVI Adapter. I figured whatever monitor I wanted to plug into, if it was VGA, I could just stick a DVI to VGA adapter on there. Turns out, this adapter only supports DVI-D (digital only). A little fact that Apple fails to mention in their product page.
What a rip.
That said, does anyone know of a REAL MDP to DVI-I adapter? Do I need to buy the dual-link adapter?

I just purchased a new MBP (and I love it), along with an Apple Mini DisplayPort to DVI Adapter. I figured whatever monitor I wanted to plug into, if it was VGA, I could just stick a DVI to VGA adapter on there. Turns out, this adapter only supports DVI-D (digital only). A little fact that Apple fails to mention in their product page.
They do say that it is for a "digital monitor, ... that includes a DVI connector."
<http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NTE>
That said, does anyone know of a REAL MDP to DVI-I adapter?
No.
Do I need to buy the dual-link adapter?
If you are going to use a 30" DVI display. It's still DVI-D (but dual-link). It will also work with single-link DVI displays.
For a VGA display you need the Mini DisplayPort to VGA adapter
<http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NDg>

Mini DisplayPort to DVI not working, No Multi-Monitor, Jerky Mouse

I have an iMac, 27 inch, 2009 model.
Until today I've had a second monitor attached via the Mini DisplayPort to DVI adapter. The monitor is a Samsung SyncMaster T260. This setup has worked perfectly well so far.
Until today that is. Now the monitor is not recognised any more and if I try to select "Detect Displays" the mouse pointer hangs every few seconds - stops dead and then restarts again.
What did I do to make this happen? Nothing (that i'm aware of). Haven't installed anything, not done a software update, just literally rebooted and it's not working anymore.
_*Things that still work...*_
The Mini DisplayPort to DVI adapter works on a Mac Mini, so that's OK
The DVI cable works fine when plugged into a PC or Mac Mini, so that's OK
The Monitor works fine when plugged into a PC or Mac Mini, via DVI, HDMI or VGA, so that's OK
So I've established that, in isolation, each part of the system is functioning perfectly well.
*_Things I have tried - without success..._*
1) Rebooting - both iMac and monitor
2) Unplugging all cables and reconnecting then rebooting again
3) Clearing the PRAM - done it twice just to make sure
4) Updated to OS X 10.6.7
5) Reset the SMC
6) Deleted the com.apple.windowserver.plist files at /Library and ~/Library
7) Googled for solutions - plenty of people seem to have one or the other of these symptoms...
Can anyone shed any light on what's happened here ? Please help!
Cheers
Mart
** Sorry if this is in the wrong place, I just found a forum specifically for the iMac so posted it there but not sure how to delete this one. **

Well, it would be interesting if that's when it had occurred. At the time, I hadn't installed 10.6.7, and hadn't installed anything immediately prior to the problem occurring.
It doesn't seem like there's any way (a-la System Files Checker on Windows) of checking the integrity of system files which may have been corrupted, nor a way of reinstalling any update in the case of this happening - or is there a way of doing this? You don't seem to have any control over updates apart from applying them - if something does go wrong, there's no way of backing out. I guess Time Machine is the answer to my own question there.
I'm happy that it's working now, but it was a pretty extreme fix to have to wipe the entire system. At least it wasn't a hardware issue, I'll be thankful for that!

Mini Displayport to DVI working in Bootcamp but not in Leopard

I've got a new unibody MBP together with a mini displayport to dvi adapter.
When I connected the dvi cable with the MDP2DVI adapter to my new MBP and my 3-months-old Benq 20" LCD monitor, nothing shown up no matter how I tried. The monitor just kept saying no signal could be detected.
Being frustrated so I did some googling, and I'm surprised by the vast number of people who have got problems with the external display!! I really didn't notice this before I decided to buy this MBP and I'm a little regretted, coz the 2nd monitor is so essential to the productivity of my work...
After searching around for a solution for some time, I am pessimistic of waiting for a solution from apple as I see some people had already address this issue in late 2008 but till now seems no solution had came out.
Last night when I use bootcamp to enter Windows XP, surprisingly it can recognize my external display!!! So now I am quite sure that it's the problem of Leopard but not the display hardware nor the adapter nor my monitor/cable. Did anybody have the similar problem as me tried this in bootcamp??

keepyourpower,
For what its worth I've been having much the same issue with my Macbook Pro. Leopard will refuse to see the external display while Windows Vista on bootcamp 90% of the time will but not without some effort. I've been able to get Leopard to use the display after going in to Windows and manually selecting display attached in the display properties menu. It doesn't always work but it will sometimes.
I'm 100% sure there is a flaw in the logicboard on some of the 2.4 Ghz that is causing this issue. I recently sent my portable in for repairs and they replaced the display which is why it was in and the Logicboard. I'm not sure why they replaced my Logicboard nothing was wrong with it, but with the new one its having much the same problem as you. As I said before I'm 100% sure this is a hardware defect in the Logic Board and if you are within your 14 day return window I'd see about asking your local Apple store to exchange the unit for a new one.
Not really sure if this will help you at all but didn't want you to think you were alone with this issue..

New Mac Book Shuts Down when I plug in the Mini DisplayPort to DVI Adapter

I have a new 15" MacBook pro and every time I plug in the Mini DisplayPort to DVI Adapter, it shuts down. I installed the Mini DisplayPort to VGA Firmware Update (http://support.apple.com/kb/dl799) and it still shuts down. It shuts down whether I have a display/projector plugged in or not.
Any suggestions???

Try turning the MBP off before you connect or disconnect an external monitor. I could be wrong but I do not believe that the DVI interface was designed to be a hot swap interface.

Mini DisplayPort to DVI Adapter does not recognize SGI-Saver on DVI (LCD)

I bought a Mini DisplayPort to DVI Adapter for my new unibody 17" MacBookPro.
No dice! The lcd is not recognized, is not seen in the displays control panel, and LCD remains dark. This LCD works fine on the previous generation MacBook Pro when plugging into the DVI connector on that computer.
The Apple adapter seems not to recognize the DVI lcd panel. What's the fix? A firmware update perhaps?!?

The adapter works perfectly with a lower resolution Dell LCD panel. I'm hoping that Apple would have a firmware update to enable operation with the older generation LCD.

Mini Displayport to DVI adapter problem

Using a mini displayport to dvi adapter results in a jumpy mouse and a delay on screen when typing text. I've searched for days, but couldn't find the answer. I am using an iMac 27" i7 8GB and as additional monitor a Philips 220WS.
Can anybody help me?

I havent seen the text issue yet but I dont think I tried typing because I use the cpu with two screens for editing and I got frustrated and unplugged the second monitor. Ill try it and get back to you. Thanks for chiming in we need to get a solution to this as its one of the main features for me.
I wonder if we can call apple with this one as it seems to be a defect.

Displayport or DVI .. ??

Similar Messages

Maybe you are looking for