Displayport to HDMI is unable to get correct color space Limited RGB Range = Poor Image Quality

RGB Full Range does not work and now my EIZO Monitor converts into Digital Television, which is not appropriate for color accuracy. Does anyone in this forum have the same issues as well.

RGB Full Range does not work and now my EIZO Monitor converts into Digital Television, which is not appropriate for color accuracy. Does anyone in this forum have the same issues as well.

Similar Messages

  • MBP Retina: Poor image quality from hdmi output

    I just had to return a Macbook Pro 13" because of this problem. I was using a HP 2311 HDMI monitor. At first, the screen would only show the upper half of the dock. I was on the phone with Apple Care and they suggested I use underscan. It worked, in that it corrected the screen size problem, but the image quality, especially rating to text was ridiculously poor. There was no suggestion available as to how to fix this. Yet, in display it says that the display is optimized for the HP 2011.
    I must say I was really surprised about this defect. I was even more surprised that the problem has been around so long without a resolution. There is no doubt that this shakes my confidence in Apple products. Thankfully, my iPad, iPod and Apple TV have always been reliable.

    I've now tested with the following cables/adapters between my rMBP -> Dell U2410:
    mDP -> VGA
    mDP -> DVI
    mDP -> HDMI
    HDMI -> HDMI
    HDMI -> DP
    None of them work. Some people are reporting *minor* differences when switching from HDMI to DVI, but I think that's mainly psychological persuasion. In my experience nothing helps - fonts are still blurry, bad image quality. I've taken still photos with a Cannon DSLR to compare the pixels - no difference.
    Someone also reported on other threads that lowering the Dell U2410's sharpness "solves" the problem, I find this to be untrue and a "fool's solution". Fonts do look sharper, but everything else looks horrible.
    My understanding is that this is related to rMBP and/or Mountain Lion external display drivers. Hopefully this can be addressed with a software update. I really hope Apple is aware of this issue (many have filed bug reports).
    More "good" discussion on the matter can be found here: http://forums.macrumors.com/showthread.php?t=1390034

  • Radeon 6850 poor image quality via hdmi

    Hi have a  connected via HDMI cable to a Sony Bravia 32in 100hz LCD TV and the image quality is poor Windows appears really pixalated, have used this TV with on board graphics and image quality is great any ideas?

    Still you should be able to bump the Res up with DVI to DVI if it has that port.  VGA PC to DVI TV will work 1080P.  Some manufacturer though do not allow DVI to do 1080p I read somewhere.  My LG 50" TV has every port I could think of DVI VGA RCA COAX HDMI probably more that I dont even know. It does 1080p with DVI but HDMI is easier with the sound.

  • Possible to get the color space and resolution from the .eps file

    Hi all,
    We have using the InDesign CS3 5.0.4, windows, javascript.  We need to get the color space and resolution of the graphics (.eps) file using scripting.
    The properties of the image like (actualPpi and effectivePpi will return the value only for the .tiff. and .jpg etc) but it will not return the .eps file resolution values.
    Kindly give me the suggesting for the decrepancies.
    Regards,
    Nagaraj

    ... open them programmatically in PhotoShop, read out resolution and color space ...
    On opening them in Photoshop, it asks you "what resolution shall I use, and what color space shall I apply?"
    A single EPS may contain any number of embedded bitmaps, with any horizontal and vertical resolution, and in any color space. You can use only a few of these with Illustrator -- and even only one at a time with Photoshop --, but other programs allow just about every possible combination.
    Not to mention procedurally generated bitmaps, also possible with PostScript.

  • Get the color of a pixel in an image

    how can i do to get the color of a pixel in an image ???
    Can anyone help me ?

    Hi,
    first of all you need to get the library to transfer your image to java.awt.image.BufferedImage object.
    I know many such libraries. Its depends of what kind of image you have: jpeg, gif, png or other.
    And when you get the BufferedImage of you picture using library, then you can get the color of any pixel in image using int BufferedImage.getRGB(int x, int y) as integer value.
    Victor Letunovsky

  • Getting the Color of a Pixel in a Image

    Hi. I need to get the Color of the point in an Image (or ImageIcon). I've seen examples but they use BufferedImages.
    Thanks, Bob

    Here is a simple conversion for you:
    BufferedImage bi = new BufferedImage(myImage, myImage.getWidth(null), myImage.getHeight(null), BufferedImage.TYPE_INT_RGB);
    Graphics g = bi.getGraphics():
    g.drawImage(myImage, 0, 0, null);If you are using ImageObserver objects, then replace null with the corresponding ImageObserver object in the BufferedImage and drawImage.

  • Unable to get correct ship Date-MRP ATP API Call

    Hi,
    We are facing issue in getting correct ship date by calling MSC_ATP_GLOBAL.Extend_ATP from OM for ATO Model. However, correct ship date returned by availibility check from OM.
    Currently, we are checking only capacity constrain by enabling CTP for critical resource for TOP Model(Resoure Only). The API is not checking the capacity constrain and returns ship date as sys date.
    Can someone provide your expert advise, why ATP ignores the capacity contrain (CTP) when called from API.
    PS: We are in distributed environment, Source on 11.5.10 and Destination on R12
    Regards,
    ML

    Hi Abhishek,
    Yes, I am able to see in the ATP details pegging tree (resource constrain- date getting pushed). In the API, I have set it as N.
    I dont see an option to upload the dump in the forum, can you please let me know what specific details to be checked in both files. I will check and let you know.
    Regards,
    ML

  • TS1702 Unable to get angry birds space danger zone to download. Everything else will download and I have a receipt for it but can't play it. Also says unable to connect to the iTunes store. Need help in normal English not tech talk please. Thank u

    I can't get angry birds space danger zone to download. I have a receipt but it won't download. I bought angry birds space and music just fine but this game won't download. Also says can not connect to iTunes store.

    try contacting the app developer and see if they can resolve your issue.

  • Why am I getting poor image quality on PowerPoint notes pages?

    Hi,
    I am using Acrobat Pro version 9, pre-Lion.  I have upgraded to Lion, but have this problem before Lion.
    When printing slides from a PowerPoint presentation, and choosing the standard "Save as Adobe PDF" option, the image quality on the output is perfect.  If, however, I do the same thing but try to print the notes pages, the image gets pixelated.
    I searched the Microsoft site for help, and all I could find is a recommendation to use PNG images in my PowerPoint, which I am indeed using.
    Any ideas?  Thanks....

    Lion should not cause the blacks to print faded. The printer drivers used by Snow Leopard and Leopard are the same version as that used by Lion.
    For starters I suggest you check that you have the latest version installed. This Apple KB article shows the MG6100 series has v10.51.2.0 as the latest version.
    I also recommend you do a Nozzle test print. This can be executed from the MG6120 control panel or via the Printer Utilties window (via Print & Scan, select the printer and then open Options & Supplies and then select the Utilties tab).
    If the nozzle test print is okay but the blacks still look faded when printing photos (note the printer has two black ink tanks - one for photos and one for text) then try a reset of the printing system. This will remove the MG6120 from the Print & Scan pane but not the supporting drivers. So you will only have to add the printer again.

  • Vizio hdtv via VGA to HDMI cable - can't get correct resolution

    I'm trying to configure the resolution for a Vizio va22lfhdtv10t on a Mini. When I used a DVI to VGA adapter the resolution was very good at 1920*1080. Now that I'm using a DVI to HDMI cable it defaults to 1080p with 30hz refresh. Font resolution is terrible on this setting and only marginally better when trying the other resolution options. I have seen some posts about creating a custom resolution, but don't know how to do this, or if there is a danger of damaging the LCD with improper settings. Has anyone gotten this HDTV to work other than as a VGA display?
    Thanks!

    1920 x 1080 is the native resolution, so (a) I wouldn't try any other resolution, and (b) I'd ONLY use a digital input (HDMI).
    If you're getting crummy unsharp pictures, it sounds as if the TV's scaler is working. You need to look for a menu setting (on the TV) to turn off the scaler. It might be called something like "1:1 pixel" mapping, or "overscan OFF" or some thing similar.
    I see on the manual p.35:
    +4. Wide - The Wide option lets you determine how the image appears on the screen. Select Normal, Wide, or Panoramic.+
    Try those three. My guess is you want "wide" mode for a 1920x1080 feed.
    Also, H and V size and position can be adjusted (p.35/36) - maybe that will help?

  • Unable to get correct sort order for subquery

    Hi,
    I have this complex subquery and I am sort of stuck on how to get the correct sort order. Here is the query
    select *
    from
    (select r.ResultsId, r.TestName, p.ProjectName, h.PhaseName,
    t.TypeText, s.StationName,
    to_char(max(r.ExecutionStartDate) over
    (partition by r.TestName, b.ConfigValue, .ConfigValue,
    d.ConfigValue),
    'DD MON YYYY HH24:MI:SS'), r.Owner, t.Status,
    b.ConfigValue Language, c.ConfigValue Telemetry,
    d.ConfigValue Flex
    from Results r, Projects p, Phase h, Type t, Station s, Status t,
    ConfigResults b, ConfigResults c, ConfigResults d
    where
    r.resultsId = b.resultsId and
    r.resultsId = c.resultsId and
    r.resultsId = d.resultsId and
    b.configurationid = 1 and
    c.configurationid = 2 and
    d.configurationid = 3 and
    r.projectid = p.projectid and
    r.statusid = t.statusid and
    h.PhaseId = r.PhaseId and
    t.TypeId = r.TestTypeId and
    s.StationId = r.StationId and %s
    Order By
    r.TestName, b.ConfigValue, c.ConfigValue, d.ConfigValue)
    order by resultsid
    My results are sorted by TestName, ConfigValue but I am trying to the
    results sorted by resultsid
    Any assistance would be greatly appreciated.
    Thanks,
    Jeff

    What happens if you add an order by r.resultsid to your order by statement directly in your subquery rather than doing an order by later?
    It will not work because I need to specify the exact fields that I use in
    the partition by statement.
    Jeff

  • UNABLE TO GET CUSTOMIZED COLORS IN TILE LAYER

    Hi,
    I just created one Base map using 2 geometry themes-:
    1.THEME_DEMO_STATES
    2.THEME_DEMO_STATES_LINE.
    I jsut customized my 2 themes as follows:
    1.Theme_demo_states as follows:
    Theme optios:styling rules
    Rendering:C:PARK FOREST & labellling as T.ROAD NAME.
    2.THEME_DEMO_STATES_LINE:
    Theme optios:styling rules
    rendering as:C.ROSY BROWN & labelling as :T.AIRPORT NAME.
    my THEME_DEMO_STATES will look like with green color and THEME_DEMO_STATES_LINE will look like with rosy brown border.
    now my problem is i just created a tile layer by using these two which will give me green color states with rosy brown states boundary lines for US. but while i am using this tile layer map in answers it is showing me default colors only.like rosy brown background color for borders too.
    why i am unable to see my customised backgroung color for states and my customized boundary lines for states.
    Please suggest and help me .
    Thanks & Regards
    Rishi

    Did you clear the mapviewer map metadata cache and remove the old tiles after you made the change to the themes?

  • Unable to print correct color.  Ever.  I need a guru.

    I have tried embedding Adobe color profile.  I have tried NOT embedding profile.  I have tried printing from Photoshop using Color Sync.  I have tried printing from Preview (using TIFF) and Adobe color controls rather than ColorSync.  No matter what I seem to do, I cannot print the color temperature I see on the screen.  Everything has a slightly marooned tint to it - away from yellow.  It's not horrible, but it is also not acceptable.
    I am on a Macbook Pro, OSX 10.7.5
    Photoshop CS5 (extended) 12.1

    There are three things in this chain that must be aligned for prints to come out as expected.
    1. The image must be in a color space that the monitor can accurately represent
    2. The monitor must be calibrated to represent that color space accurately
    3. The printer must be able to represent that color space accurately.
    Main issues with mis-matched color can be due to:
    • using a color space that is not supported by your printer
    • using a color space on your printer or output device that is different than the color space of your file/editing program
    • having a monitor that is seriously out of calibration.
    If you are interested in good quality prints, start with the monitor since that is how you are setting up the image.
    There are a number of calibration devices/ software out there. I used a Spyder 2 Pro for a while and it helped. There are also others.
    Have fun.
    x

  • I'm getting poor image quality when rendering PDF grahics

    I have a PAL 1920x1080 50i ProRes 422 timeline, when I add PDF images from a Power Point I have to enlarge them about 100% to fill the frame adequately. When these clips are rendered they end up with the text loosing definition and showing jpeg like artifacts. They are 1006x760 pixels. Is there a solution? Should I go back and try to get hold of the original slides?

    Thanks everyone for the help, in the end I bought a PP/PDF converter and made TIFFs from them. (Tinyware PDF Converter)  Not great but better than before. It was the fact that the image appeared fine in the canvas until I rendered it, it was only then that the text looked bad. This extractor seems to work ok, the methods on various blogs only worked if you have Office for Mavericks, Page extracts PPs but not to image files.
    Thanks again.

  • Unable to get the Text proerty of Range class

    Hi,
    I am using the Text property of Range class for excel template development using VSTO.While reloading the template i am getting the error "Unable to get the Text proerty of Range class".If i skip this line of code,i am getting similar kind of errors while accessing the properties of Range class(like Range.copy() ,Range.Locked, Range.EntireRow.Hidden).In all these cases i am getting the similar kind of error "unable to get the property of Range Class".
    Waiting for a quick response...
    Thanks in advance..

    Hi Besse,
    Actully, the error is coming when i try to populate datatable with the the range values in one of the sheet.
    I am using the below code.
    //"wsInteropMetadata"  is the sheet object.
    //"RangeName" is the range name in the sheet.
    rngConfig = wsInteropMetadata.get_Range("RangeName", Type.Missing);
    for (int iRow = 1; iRow <= iRowCnt; iRow++)
        dRNew = dTMetadataTable.NewRow();
        for (int iCol = 1; iCol <= iColCnt; iCol++)
          rngCell = (Excel.Range)rngConfig.Cells[iRow, iCol];
          dRNew[iCol - 1] = rngCell.Text.ToString();
       dTMetadataTable.Rows.Add(dRNew);
    In the first load of the template,this code is working fine.In the reload i am getting the error at "rngCell.Text".If i see in quickwatch,most of the properties of  "rngCell" object are throwing "System.Runtime.InteropServices.COMException".See the below exception information.
     Exception Information
     Exception Type: System.Runtime.InteropServices.COMException
    Message: Unable to get the Text property of the Range class
    Source: Microsoft Office Excel
    ErrorCode: -2146827284
    Thanks
    Krishna.

Maybe you are looking for