Displayport /USB to HDMI adapter compatibility under the Bootcamp

I read that the Displayport/ USB to HDMI adapter works well with Apple but has anyone tested within Windows environment under Bootcamp? Are there drivers that support the adapter already?

Usually, A *[USB to HDMI Adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in MacBook/Windows OS.. You just need to download the usb display adapter driver.. But i have on idea that a *[usb hdmi adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in Bootcamp. Maybe it's OK.

Similar Messages

Displayport/ USB to HDMI adapter within Windows 7 under the Bootcamp

I read that the Displayport/ USB to HDMI adapter works well with Apple but has anyone tested it within Windows 7 under Bootcamp? Are there drivers that support the adapter already?

Usually, A *[USB to HDMI Adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in MacBook/Windows OS.. You just need to download the usb display adapter driver.. But i have on idea that a *[usb hdmi adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in Bootcamp. Maybe it's OK.

My apple tv is not working, the only thing showing up on the screen is the apple box with a white usb cord connected to it under the hdmi plug in and next to it is an iTunes sign- how do i fix my apple tv?

my apple tv is not working, the only thing showing up on the screen is the apple box with a white usb cord connected to it under the hdmi plug in and next to it is an iTunes sign- how do i fix my apple tv?

Restore.

AT300SE - Connect to TV using MHL micro usb to hdmi adapt

Hi,
I recently received the Toshiba Tablet AT300SE. This newer tablet no longer has the HMDI connection port. However it has the micro USB. My question is, can I use this micro USB to connect to my TV using the micro a USB to HDMI adapter?
Has anyone ever done this and made it work?
Thanks,
Nick

Here an interesting info from Toshiba:
+Do the AT100, AT200, AT270, AT300 and AT300SE tablets support Mobile High-Definition Link (MHL)?+
http://aps2.toshiba-tro.de/kb0/FAQ3103FV0000R01.htm
The AT100, AT200, AT270, AT300 and AT300SE tablets *do not* support Mobile High-Definition Link (MHL).

USB to HDMI adapter for external display in clamshell mode?

Hello.
Does anyone know of a USB to HDMI (or DVI) adapter so that I can connect an external display (with an HDMI or DVI cable) to a USB port on my Macbook air?
I need to run it in clamshell mode, mirroring the Air display. The Monoprice USB to HDMI adapter (which uses DislplayLink drivers) I tried does not work properly in clamshell mode with mirroring (though it works in arrangement mode). I know I can use the Thunderbolt port, but I need to leave this free for a Firewire device.
Thanks.

Unfortunately, I have the same problem, but using USB devices and Displaylink software. I know there are issues with Displaylink software as they say the problem is with Apple. I have three external monitors with a late 2008 I Macbook Pro which gives me four screens. I was able to get two to work + the Macbook, but there were so many issues, like you described, that I have given up and I am just using the Mini Display port which gives me one external and the Macbook. Looks like we will just have to wait until Apple does something. I have found no other solutions at this point - hardware or otherwise.

Micro USB to HDMI adapter support on Encore 2 WT8-B-102

I would like to know, if there is any chance to connect this tablet to TV/Monitor through the micro usb port by attaching a micro usb to HDMI adapter? If yes, is there any specific adapter being compatible with this Tablet device?
Thanks for the support
Alex

First of all it’s not possible to use USB port (micro USB) in order to output the video signal. The USB port does not support such functionality.
According to the tablet's specification page the WT8-B does not support video out interface (HDMI etc..) and therefore it's not possible to connect it directly to the TV device.

Triple monitor with intel and SenseVision Club 3d usb to hdmi adapter

Hi,
I have an all in one machine with a single intel VGA:
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
I also have an external monitor which works fine. I would like to use a third monitor through the SenseVision Club 3d usb to hdmi adapter (Chipset: DL-195).
http://www.club-3d.com/index.php/produc … apter.html
I'm using the udlfb module with the option: fb_defio=1
The monitor attached to the usb to hdmi adapter turns green when the machine starts.
The problem is that I'm able to use only one adapter at the time. So I can use the integrated monitor and the external one attached to the intel VGA or the monitor attached to the usb to hdmi adapter but not all of them together.
Here is my xorg.conf:
Section "Device"
Identifier "intel"
Driver "intel"
# BusID "PCI:0:2:0"
EndSection
Section "Device"
Identifier "dl1"
Driver "fbdev"
# BusID "PCI:0:3:0"
Option "fbdev" "/dev/fb1"
EndSection
Section "Monitor"
Identifier "monitor0"
EndSection
Section "Monitor"
Identifier "monitor1"
EndSection
Section "Monitor"
Identifier "monitor2"
EndSection
Section "Screen"
Identifier "screen0"
Device "dl1"
Monitor "monitor0"
#DefaultDepth 16
#DefaultDepth 24
EndSection
Section "Screen"
Identifier "screen1"
Device "intel"
Monitor "monitor1"
#DefaultDepth 16
DefaultDepth 24
EndSection
Section "Screen"
Identifier "screen2"
Device "intel"
Monitor "monitor2"
#DefaultDepth 16
DefaultDepth 24
EndSection
Section "ServerLayout"
Identifier "multihead"
Screen 0 "screen0" 0 0
Screen 1 "screen0" LeftOf "screen1"
Screen 2 "screen1" LeftOf "screen2"
Option "Xinerama" "on"
EndSection
Switching the screen0 and screen1 positions in the xorg.conf makes work the intel vga. The current configuration enables only the usb monitor. The screen2 is discarded by the xorg stating that none monitor is attached to the device.
I also tried to tinker with the BusID values. Specifying BusID "USB" makes the xorg crash.
Is it possible at all to use three monitors at the time with the current state of art? Any success story with this setting?
Could you please share your working xorg.conf if you have any?
Any suggestion?
Thank you very much.
Last edited by ArchArael (2013-02-28 09:52:05)

Apparently yes,
According to the thread:
To restore to the old behaviour, put this in your ~/.drirc:
<driconf>
<device screen="0" driver="i915">
<application name="Default">
<option name="vblank_mode" value="0" />
</application>
</device>
</driconf>
But I don't come back to the same perfs as before (tested with eternal lands).
I noticed that in my /var/log/Xorg.0.log:
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00020202 to 0x00020000
(WW) intel(0): PIPEBSTAT before: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: VBLANK_INT_ENABLE
There seem to be some problem with mtrr
I found this problem which seems related but I only have 2GB of memory
Last edited by sebcactus (2008-11-30 21:20:22)

Olympus xz-1 camera when connected to ipad2 with supplied ubs cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further!

olympus xz-1 camera when connected to ipad2 with supplied usb cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further! if i take the card from the camera and put it into the card to 30pin adapter and plug that into the ipad no problems. if i connect the camera with supplied usb cable to desktop imac , no problems. if i connect my olympus slr to the ipad using its usb cable into the apple usb to 30pin , no problem . very frustrating , i don't want to always have to take the card out of the camera to down load photos to the ipad2,IDEAS?

I'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad

USB to HDMI adapter cuts out randomly

My CableMatters USB3.0 to HDMI adapter worked great in the previous version of OSX, but now it will randomly throughout the day go blank, all the windows will migrate to another monitor (I use 2 external monitors on my MBP), and then pop back on after 3-5 seconds. This issue is known to CableMatters (and other makers of these types of devices), but they say the issue is on Apple's end. I was surprised to see there wasn't an entry about this here so figured I'd post one, hoping to get Apple's attention to it. I've also submitted a bug report (15492402). Unfortunately, search on the bug report site doesn't seem to work for terms, so I'm not sure how many other reports have been submitted for this issue.

Unfortunately, I have the same problem, but using USB devices and Displaylink software. I know there are issues with Displaylink software as they say the problem is with Apple. I have three external monitors with a late 2008 I Macbook Pro which gives me four screens. I was able to get two to work + the Macbook, but there were so many issues, like you described, that I have given up and I am just using the Mini Display port which gives me one external and the Macbook. Looks like we will just have to wait until Apple does something. I have found no other solutions at this point - hardware or otherwise.

When connecting an HDMI adapter I get the message This device is not supported by this ipad

WWhen I connect the adapter vis an HDMI cable to my TV, I see the image of my IPad then I get the error message about not supported and the TV displays No Signal. I have a multifunction adapter that works although the connection on it is fiddly. I Use an IPad 2 with the latest version of IOS .

Howdy Gdad_Edw,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides information and troubleshooting tips that can help you resolve the no video issue with your Apple Digital AV Adapter and your iPad.
About Apple Digital AV Adapters for iPhone, iPad, and iPod touch - Apple Support
Troubleshooting
If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
Disconnect and reconnect the adapter from the iOS device and display.
Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
Remove any VGA or HDMI extension cables or converters.
Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
Ciao,
-Jason

PC Keyboard compatibility under DOS-BOOTCAMP?

Hello,
I just burned a disk with Hiren's disk utilities and while the programs which are dos boot up fine, I lose all keyboard access.. prob because DOS doesn't recognize USB keyboards.. is there a way to get keyboard access while under Hiren's disk utilities?

Hi Wiebe.
Thanks for your useful tips and help. Will dig into it.
Rgds
Wong

The Best Mini Display Port HDMI Adapter?

I am looking for recommendations on a good Mini Display Port HDMI Adapter for my Macbook Pro 2011 Sandy Bridge. I have gone through about 4 adapters in the past year due to the adapters become unresponsive after 2 or 3 months. I use my Macbook heavily on external monitors for my work (averaging 7 hours or more a day between various monitors).
I can rule out the HDMI wire itself not being the cause of the problem but the adapters have been a huge miss and drain on cash this year. If anyone who is also a heavy user can point me in the direction of a durable adapter I would be very grateful.

I always recommend monopriice.com for cables and adapters.
Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support
But all these adapters are in the form of "pigtails" and no matter where you get them the strain relief and the cables can fatigue and break from constant bending or pulling (doesn't help your macbook socket any either).
Maybe you should order a bunch. They are cheaper that way at monoprice.
Another possibility might be you trying a mini displayport to HDMI cable. No adapter.
Kanex Mini DisplayPort to HDMI Cable with Audio Support (10 ft.)
But of course you could get about 6 adapters for the price of that one cable!

Thunderbolt HDMI adapter compatible with my DisplayPort?

I have a mid 2009 Macbook Pro, but may eventually get a newer one that has Thunderbolt instead of mini DisplayPort. For the time being, however, I need an HDMI adapter. If I purchased a Thunderbolt to HDMI adapter, would it at least transfer the video signal on my mid-09 (I already know it wouldn't transfer audio)? I would rather buy one adapter that works with both my current macbook and a newer one, versus buying a specific one for each. Basically, I'm asking if a Thunderbolt to HDMI adapter would serve the same purpose as a DisplayPort to HDMI adapter, for a computer that does not have Thunderbolt.

Welcome to the Apple Support Communities
Instead of buying a Thunderbolt to HDMI adapter, buy a Mini DisplayPort to HDMI adapter, because I'm not sure if a Thunderbolt to HDMI adapter will work with a Mac without Thunderbolt ports. Also, for the use you want to give to the adapter, you don't need a Thunderbolt adapter. That's because Thunderbolt and Mini DisplayPort use the same port, so a Mini DisplayPort to HDMI adapter will work with both MacBooks Pro.
The only difference between Thunderbolt and Mini DisplayPort is that Thunderbolt can transfer data, audio and video. As you want to connect an external display, you don't need to transfer data, so Mini DisplayPort will work for your use

Does the "new iPad" output better picture quality to an HDTV (via HDMI adapter) than the previous iPads? Or is it pretty much the same?

I'm currently using the iPad 2 to review photos and I also mirror it to an HDTV (via HDMI adapter). Does the "new iPad" output a better picture quality using the same connection method? This is mainly in reference to mirroring and not for watching movies/video.

Wundrbr3d-
I expect that video will be higher resolution since there is also a new HDMI adapter available for the iPad 3. I do not know if it is required for a lower resolution source, but probably is for higher resolution.
Fred

Am i the only one with a HDMI adapter no longer working ?

Hi. I own an Iphone 4 running ios 5.1.1. I used to be able to watch a video using my HDMI adapter when i was running ios 5.0.
But i recently wanted to use it and i saw it would not work at all !!! I was running ios 5.0.1. Then i thought i should update my iphone to make it work again, but in vain, my adapter seems to work no more... I of course tried to restore my iphone and checked my hdmi cable. Am i the only one or am i the choosen one like neo ? Thank you !

first of all
apple don't read or write here so they will never "say anythign" here or read your posts
this is a user helping user forum only
you can get their ear using the feedback
http://www.apple.com/feedback/
don't own the hdmi adapter but got the component and composite ones and they work fine with my iphone4 with latests os
what I would do if I was me
first step of troubleshooting would be to reboot the phone
http://www.apple.com/support/iphone/assistant/phone/#section_1
second step then I would try another ios device that is supported with the device (of cause only iphone4s and ipad2 and up support mirror so for testing I use youtube as I know that support the tv out feature)
trying out the other ios device would rule out that the cable is damaged and you just happend to notice around the time you updated os
third step I would try other devices that use the pin30 cable to see if the connector in the iphone was damaged

Displayport /USB to HDMI adapter compatibility under the Bootcamp

Similar Messages

Maybe you are looking for